summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb
AgeCommit message (Expand)Author
2010-11-09usb: musb: fail unaligned DMA transfers on v1.8 and aboveAnand Gadiyar
2010-11-08usb: musb: gadget: kill duplicate code in musb_gadget_queue()Sergei Shtylyov
2010-11-05usb: musb: Fix handling of spurious SESSREQHeikki Krogerus
2010-11-05usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd timeMing Lei
2010-11-05USB: musb: blackfin: push clkin value to platform resourcesBob Liu
2010-11-05USB: musb: blackfin: fix dynamic device<->host changingBob Liu
2010-11-05USB: musb: blackfin: pm: make it workBob Liu
2010-11-05USB: musb: pm: don't rely fully on clock supportBob Liu
2010-11-05USB: musb: blackfin: fix musb_read_txhubport() definitionIan Jeffray
2010-11-05USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configurationMing Lei
2010-11-05usb: musb: don't leave PHY enabled on shutdown()Grazvydas Ignotas
2010-11-05usb: musb: musb_gadget: fix resource leakage in error pathRahul Ruikar
2010-11-05usb: musb: gadget: fix dma mode 0 in double buffer Rx caseMing Lei
2010-10-22USB: musb: AM35x: Workaround for fifo read issueAjay Kumar Gupta
2010-10-22USB: musb: add musb support for AM35xAjay Kumar Gupta
2010-10-22usb: makefile cleanupmatt mooney
2010-10-22usb: musb: blackfin: call gpio_free() on error path in musb_platform_init()Sergei Shtylyov
2010-10-22usb: musb: blackfin: call usb_nop_xceiv_unregister() in musb_platform_exit()Sergei Shtylyov
2010-10-22USB: MUSB: fix kernel WARNING/oops when unloading module in OTG modeSergei Shtylyov
2010-10-22usb: change to new flag variablematt mooney
2010-10-22usb: musb: gadget: only enable AUTOCLEAR in double buffered caseFelipe Balbi
2010-10-22usb: musb: gadget: fix ZLP sending in musb_g_tx(v1)Ming Lei
2010-10-22usb: musb: ignore spurious SESSREQ interruptsHeikki Krogerus
2010-10-22usb: musb: gadget: kill unreachable code in musb_g_rx()Sergei Shtylyov
2010-10-22USB: musb: suppress warning about unused flagsJon Povey
2010-10-22usb: musb: host: support DMA transfers greater than max channel lengthT. S., Anil Kumar
2010-10-22usb: musb: Change to direct addr in context save/restoreBob Liu
2010-10-22usb: musb: host: unmap the buffer for PIO data transfersMaulik Mankad
2010-10-22usb: musb: musbhsdma: increase max_len to 1MBAnil Shetty
2010-10-22usb: musb: support ISO high bandwidth for gadget modeMing Lei
2010-10-22usb: musb: introduce DA8xx/OMAP-L1x glue layerSergei Shtylyov
2010-10-22USB: musb: make DBG() calls actually depend on CONFIG_USB_MUSB_DEBUGSergei Shtylyov
2010-10-22usb gadget: don't save bind callback in struct usb_gadget_driverUwe Kleine-König
2010-09-24usb: musb: gadget: restart request on clearing endpoint haltSergei Shtylyov
2010-09-24usb: musb: host: Issue a memory barrier before starting DMASantosh Shilimkar
2010-09-24usb: musb: gadget: fix dma length in txstateMing Lei
2010-09-24usb: musb: gadget: complete request only if data is transfered overMing Lei
2010-09-24usb: musb: gadget: fix DMA length for OUT transferMing Lei
2010-09-24usb: musb: gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1Ming Lei
2010-09-24usb: musb: gadget: fix bulk IN infinit hangs in double buffer caseMing Lei
2010-09-24usb: musb: gadget: fix kernel panic if using out ep with FIFO_TXRX styleMing Lei
2010-09-20usb: musb_debugfs: don't use the struct file private_data field with seq_filesMathias Nyman
2010-08-10USB: musb: forward debug mode feature to gadgetstephane duverger
2010-08-10USB: musb: do not override DMA mode in channel programAnand Gadiyar
2010-08-10USB: musb: Kill board specific pinmux from driver fileAnand Gadiyar
2010-08-10USB: musb: fix compilation warning in host only modeAjay Kumar Gupta
2010-08-10USB: musb: use correct register widths in register dumpsAnand Gadiyar
2010-08-10USB: convert usb_hcd bitfields into atomic flagsAlan Stern
2010-07-26USB: musb: tusb6010: fix compile error with n8x0_defconfigFelipe Balbi
2010-06-30USB: musb: Enable the maximum supported burst mode for DMAHema HK
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-28 02:07:04 +0000