summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb
AgeCommit message (Collapse)Author
2012-03-01usb: core: hcd: make hcd->irq unsignedFelipe Balbi
There's really no point in having hcd->irq as a signed integer when we consider the fact that IRQ 0 means NO_IRQ. In order to avoid confusion, make hcd->irq unsigned and fix users who were passing -1 as the IRQ number to usb_add_hcd. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-01Merge tag 'xceiv-for-v3.4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next USB: transceiver changes for 3.4 Here we have a big rework done by Heikki Krogerus (thanks) which splits OTG functionality away from transceivers. We have known for quite a long time that struct otg_transceiver was a bad name for the structure, considering transceiver is far from being OTG-specific (see 4e67185).
2012-03-01Merge tag 'musb-for-v3.4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next USB: MUSB changes for 3.4 Here are a set of changes to the MUSB driver. In summary we have a patch making modules behave better, there's a fix on debugfs' error path, a small change removing an unnecessary pm_runtime call on musb_shutdown() and a fix to relesect the endpoint in Interrupt context. This last patch is needed because we must drop musb's lock when calling request->complete() and that could cause problems if another thread queues a request and ends up changing MUSB_INDEX register.
2012-02-27usb: otg: Convert all users to pass struct usb_otg for OTG functionsHeikki Krogerus
This changes the otg functions so that they receive struct otg instead of struct usb_phy as parameter and converts all users of these functions to pass the otg member of their usb_phy. Includes fixes to IMX code from Sascha Hauer. [ balbi@ti.com : fixed a compile warning on ehci-mv.c ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-27usb: Convert all users to new usb_phyHeikki Krogerus
Use the new usb_phy_* functions with transceiver operations instead of the old otg functions. Includes fixes from Sascha Hauer. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-24usb: musb: Reselect index reg in interrupt contextSupriya Karanth
musb INDEX register is getting modified/corrupted during temporary un-locking in a SMP system. Set this register with proper value after re-acquiring the lock Scenario: --------- CPU1 is handling a data transfer completion interrupt received for the CLASS1 EP CPU2 is handling a CLASS2 thread which is queuing data to musb for transfer Below is the error sequence: CPU1 | CPU2 -------------------------------------------------------------------- Data transfer completion inter- | rupt recieved. | | musb INDEX reg set to CLASS1 EP | | musb LOCK is acquired. | | | CLASS2 thread queues data. | | CLASS2 thread tries to acquire musb | LOCK but lock is already taken by | CLASS1, so CLASS2 thread is | spinning. | From Interrupt Context musb | giveback function is called | | The giveback function releases | CLASS2 thread now acquires LOCK LOCK | | ClASS1 Request's completion cal-| ClASS2 schedules the data transfer and lback is called | sets the MUSB INDEX to Class2 EP number | Interrupt handler for CLASS1 EP | tries to acquire LOCK and is | spinning | | Interrupt for Class1 EP acquires| Class2 completes the scheduling etc and the MUSB LOCK | releases the musb LOCK | Interrupt for Class1 EP schedul-| es the next data transfer | but musb INDEX register is still| set to CLASS2 EP | Since the MUSB INDEX register is set to a different endpoint, we read and modify the wrong registers. Hence data transfer will not happen properly. This results in unpredictable behavior So, the MUSB INDEX register is set to proper value again when interrupt re-acquires the lock Cc: stable@vger.kernel.org Signed-off-by: Supriya Karanth <supriya.karanth@stericsson.com> Signed-off-by: Praveena Nadahally <praveen.nadahally@stericsson.com> Reviewed-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-13usb: musb: Start using struct usb_otgHeikki Krogerus
Use struct usb_otg members with OTG specific functions instead of usb_phy members. [ balbi@ti.com: added a missing change on musb_gadget.c to avoid a compile error on a later patch ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-13usb: otg: Rename otg_transceiver to usb_phyHeikki Krogerus
This is the first step in separating USB transceivers from USB OTG utilities. Includes fixes to IMX code from Sascha Hauer. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-03usb: musb: fix a build error on mipsCong Wang
On mips, we got: drivers/usb/musb/musb_io.h:44: error: conflicting types for 'readsl' arch/mips/include/asm/io.h:529: error: previous definition of 'readsl' was here drivers/usb/musb/musb_io.h:46: error: conflicting types for 'readsw' arch/mips/include/asm/io.h:528: error: previous definition of 'readsw' was here drivers/usb/musb/musb_io.h:48: error: conflicting types for 'readsb' so, should add !defined(CONFIG_MIPS) too. Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-01usb: musb: debugfs: fix error checkFelipe Balbi
debugfs will return NULL on failure, so we must check for !ptr instead of IS_ERR(ptr). Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-31usb: musb: make modules behave betterFelipe Balbi
There's really no point in doing all that initcall trickery when we can safely let udev handle module probing for us. Remove all of that trickery, by moving everybody to module_init() and making proper use of platform_device_register() rather than platform_device_probe(). Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Tested-by: Tasslehoff Kjappfot <tasskjapp@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-25usb: musb: omap2430: minor cleanups.NeilBrown
1/ remove incorrect comment (it is a non-blocking notifier) 2/ Use correct symbolic return value for notifier 3/ Make sure otg_notifier_work is cancelled before module exit. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: musb: fix shutdown while usb gadget is in useGrazvydas Ignotas
If we shutdown without stopping the gadget first or removing the cable, gadget manages to configure itself again: root@pandora /root# poweroff The system is going down NOW! Requesting system poweroff [ 47.714385] musb-hm halted. [ 48.120697] gadget: suspend [ 48.123748] gadget: reset config [ 48.127227] gadget: ecm deactivated [ 48.130981] usb0: gether_disconnect [ 48.281799] gadget: high-speed config #1: CDC Ethernet (ECM) [ 48.287872] gadget: init ecm [ 48.290985] gadget: notify connect false [ 48.295288] gadget: notify speed 425984000 This is not only unwanted, it's also happening on half-unitialized state, after musb_shutdown() has returned, which sometimes causes hardware to fail to work after reboot. Let's better properly stop gadget on shutdown too. This patch moves musb_gadget_cleanup out of musb_free(), which has 2 callsites: probe error path and musb_remove. On probe error path it was superflous since musb_gadget_cleanup is called explicitly there, and musb_remove() calls musb_shutdown(), so cleanup will get called as before. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: musb: davinci: fix build breakageSekhar Nori
Commit 0020afb369859472a461ef4af6410732e929d402 (ARM: mach-davinci: remove mach/memory.h) removed mach/memory.h for DaVinci which broke DaVinci MUSB build. mach/memory.h is not actually needed in davinci.c, so remove it. While at it, also remove some more machine specific inclulde files which are not needed for build. Tested on DM644x EVM using USB card reader. Cc: stable@vger.kernel.org # v3.2 Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: musb: drop superfluous pm_runtime calls around musb_shutdownGrazvydas Ignotas
Since commit 4f9edd2d7e8d "usb: musb: Fix the crash issue during reboot" musb_shutdown() does pm_runtime_get_sync/pm_runtime_put by itself, so this no longer needs to be done by the caller. Also, musb_exit_debugfs() doesn't access the device, so just drop those runtime_pm calls. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-09Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits) USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c xhci: Clean up 32-bit build warnings. USB: update documentation for usbmon usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops drivers/usb/class/cdc-acm.c: clear dangling pointer drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree drivers/usb/host/isp1760-if.c: introduce missing kfree usb: option: add ZD Incorporated HSPA modem usb: ch9: fix up MaxStreams helper USB: usb-skeleton.c: cleanup open_count USB: usb-skeleton.c: fix open/disconnect race xhci: Properly handle COMP_2ND_BW_ERR USB: remove dead code from suspend/resume path USB: add quirk for another camera drivers: usb: wusbcore: Fix dependency for USB_WUSB xhci: Better debugging for critical host errors. xhci: Be less verbose during URB cancellation. xhci: Remove debugging about ring structure allocation. xhci: Remove debugging about toggling cycle bits. xhci: Remove debugging for individual transfers. ...
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2011-12-22Merge branch 'for-next/musb' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/musb' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: musb: remove extern qualifier from musb_debug.h header usb: musb: cleanup kconfig usb: musb: trivial Kconfig cleanups musb: omap2430: avoid pm_runtime_disable() usb: musb: remove a bit of indentation usb: musb: trivial cleanup usb: musb: fix pm_runtime mismatch
2011-12-21usb: musb: remove extern qualifier from musb_debug.h headerVladimir Zapolskiy
This change removes confusing extern qualifier, which doesn't have any practical sense there. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@nokia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20usb: musb: cleanup kconfigFelipe Contreras
The whole thing depends on USB_MUSB_HDRC, just add an 'if'. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20usb: musb: trivial Kconfig cleanupsFelipe Contreras
Shuffle the code a bit so the description is at the top. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20musb: omap2430: avoid pm_runtime_disable()Felipe Contreras
These are handled by drivers core, and in a way that doesn't wake up the devices. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20usb: musb: remove a bit of indentationFelipe Contreras
And use dev instead of musb->controller. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20usb: musb: trivial cleanupFelipe Contreras
enabled && driver || !enabled can be simplified to !enabled || driver. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20usb: musb: fix pm_runtime mismatchFelipe Contreras
In musb_init_controller() there's a pm_runtime_put(), but there's no pm_runtime_get(), which creates a mismatch that causes the driver to sleep when it shouldn't. This was introduced in 7acc619[1], but it wasn't triggered in my setup until 18a2689[2] was merged to Linus' branch at point df0914[3]. IOW; when PM is working as it was supposed to. However, it seems most of the time this is used in a way that keeps the counter above 0, so nobody noticed. Also, it seems to depend on the configuration used in versions before 3.1, but not later (or in it). I found the problem by loading isp1704_charger before any usb gadgets: http://article.gmane.org/gmane.linux.kernel/1226122 All versions after 2.6.39 are affected. [1] usb: musb: Idle path retention and offmode support for OMAP3 [2] OMAP2+: musb: hwmod adaptation for musb registration [3] Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 Cc: stable@vger.kernel.org Cc: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-14usb: musb: fix reset issue with full speed deviceAjay Kumar Gupta
TXMAXP register is not getting programmed correctly for a full speed device as can_bulk_split() have been removed by "0662481: usb: musb: disable double buffering when it's broken" patch. Adding back the case for can_bulk_split() to fix the reset message seen with a full speed stick. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13Merge branch 'for-next/gadget' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits) usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu() usb: renesas_usbhs: add force packet remove method usb: renesas_usbhs: care usb_hcd_giveback_urb() status usb: renesas_usbhs: add usbhsh_is_running() usb: renesas_usbhs: disable attch irq after device attached usb: renesas_usbhs: care pipe sequence usb: renesas_usbhs: add usbhs_pipe_attach() method usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error case usb: renesas_usbhs: modify device attach method usb: renesas_usbhs: pop packet when urb dequeued usb: renesas_usbhs: add lost error value when enqueue usb: gadget: mv_udc: replace some debug info usb: gadget: mv_udc: refine suspend/resume function usb: gadget: mv_udc: refine the clock relative code usb: gadget: mv_udc: disable ISR when stopped usb: gadget: mv_udc: add otg relative code usb: gadget: Use kcalloc instead of kzalloc to allocate array usb: renesas_usbhs: remove the_controller_link usb: renesas_usbhs: add test-mode support usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable. ...
2011-12-12Merge branch 'for-next/musb' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/musb' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: musb: omap2430: fix compile warning usb: musb: fix pm_runtime calls while atomic usb: musb: drop ARCH dependency usb: musb: headers cleanup usb: musb: allow building USB_MUSB_TUSB6010 as a module usb: musb: use a Kconfig choice to pick the right DMA method usb: musb: omap2+: save and restore OTG_INTERFSEL usb: musb: omap2+: fix context api's usb: musb: ux500: optimize DMA callback routine
2011-12-12Merge branch 'for-next/dwc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (392 commits) usb: dwc3: ep0: fix for possible early delayed_status usb: dwc3: gadget: fix stream enable bit usb: dwc3: ep0: fix GetStatus handling (again) usb: dwc3: ep0: use dwc3_request for ep0 requsts instead of usb_request usb: dwc3: use correct hwparam register for power mgm check usb: dwc3: omap: move to module_platform_driver usb: dwc3: workaround: missing disconnect event usb: dwc3: workaround: missing USB3 Reset event usb: dwc3: workaround: U1/U2 -> U0 transiton usb: dwc3: gadget: return early in dwc3_cleanup_done_reqs() usb: dwc3: ep0: handle delayed_status again usb: dwc3: ep0: push ep0state into xfernotready processing usb: dwc3: fix sparse errors usb: dwc3: fix few coding style problems usb: dwc3: move generic dwc3 code from gadget into core usb: dwc3: use a helper function for operation mode setting usb: dwc3: ep0: don't use ep0in for transfers usb: dwc3: ep0: use proper endianess in SetFeature for wIndex usb: dwc3: core: drop DWC3_EVENT_BUFFERS_MAX usb: dwc3: omap: add multiple instances support to OMAP ...
2011-12-12usb: musb: omap2430: fix compile warningFelipe Balbi
fix the following compile warning: drivers/usb/musb/omap2430.c: In function 'musb_otg_notifier_work': drivers/usb/musb/omap2430.c:279:3: warning: 'return' with a value, in function returning void drivers/usb/musb/omap2430.c:282:2: warning: 'return' with a value, in function returning void Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: fix pm_runtime calls while atomicVikram Pandita
musb pm_runtime_get_sync call happens in intrrupt context on cable attach case That can result in re-enabling the interrupts and cause side affects. So move the code to a work queue. Following is the error path hit on cable attach: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:802 in_atomic(): 0, irqs_disabled(): 0, pid: 18, name: irq/378-twl6030 Backtrace: [<c00520f0>] (dump_backtrace+0x0/0x110) from [<c054f454>] (dump_stack+0x18/0x1c) [<c054f43c>] (dump_stack+0x0/0x1c) from [<c007f59c>] (__might_sleep+0x130/0x134) [<c007f46c>] (__might_sleep+0x0/0x134) from [<c02c2794>] (__pm_runtime_resume+0x94/0x98) [<c02c2700>] (__pm_runtime_resume+0x0/0x98) from [<c033e7e4>] (musb_otg_notifications+0x9c/0x164) [<c033e748>] (musb_otg_notifications+0x0/0x164) from [<c00b3df0>] (notifier_call_chain+0x4c/0x8c) [<c00b3da4>] (notifier_call_chain+0x0/0x8c) from [<c00b44a8>] (__atomic_notifier_call_chain+0x40/0x54) [<c00b4468>] (__atomic_notifier_call_chain+0x0/0x54) from [<c00b44dc>] (atomic_notifier_call_chain+0x20/0x28) [<c00b44bc>] (atomic_notifier_call_chain+0x0/0x28) from [<c033f124>] (twl6030_usb_irq+0xc8/0xdc) [<c033f05c>] (twl6030_usb_irq+0x0/0xdc) from [<c00d79f8>] (irq_thread_fn+0x24/0x40) [<c00d79d4>] (irq_thread_fn+0x0/0x40) from [<c00d7b64>] (irq_thread+0x150/0x1d8) [<c00d7a14>] (irq_thread+0x0/0x1d8) from [<c00adf70>] (kthread+0x94/0x98) [<c00adedc>] (kthread+0x0/0x98) from [<c0094388>] (do_exit+0x0/0x720) Tested with: MUSB Device mode: Cold boot / Hot plug MUSB Host mode: Cold boot / Hot plug Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: drop ARCH dependencyFelipe Balbi
musb core driver and tusb6010 glue layer don't depend on anything which is ARCH-specific. It builds fine on x86 and ARM. Dropping the dependency so we can compile-test on linux-next. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: headers cleanupFelipe Balbi
Remove a few unnecessary headers from a few files. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: allow building USB_MUSB_TUSB6010 as a moduleArnd Bergmann
Commit 1376d92f9 "usb: musb: allow musb and glue layers to be modules" made the USB_MUSB_TUSB6010 option modular, but actually building the driver as a module does not work, so various randconfig builds actually fail. This changes all code that depends on the option to also check for modular builds, and exports the necessary symbols. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: use a Kconfig choice to pick the right DMA methodArnd Bergmann
The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: omap2+: save and restore OTG_INTERFSELHema HK
we need to save and restore OTG_INTERFSEL register else we will be unable to function on resume after OFF mode. Reported-by: Devaraj Rangasamy <dev@ti.com> Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: omap2+: fix context api'sVikram Pandita
RxFifoSz, TxFifoSz, RxFifoAddr, TxFifoAddr are all indexed registers. So before doing a context save or restore, INDEX register should be set, then only one gets to the right register offset. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: ux500: optimize DMA callback routinePer Forlin
Skip the use of work queue and call musb_dma_completion() directly from DMA callback context. Here follows measurements on a Snowball board with ondemand governor active. Performance using work queue: (105 MB) copied, 6.23758 s, 16.8 MB/s (105 MB) copied, 5.7151 s, 18.3 MB/s (105 MB) copied, 5.83583 s, 18.0 MB/s (105 MB) copied, 5.93611 s, 17.7 MB/s Performance without work queue (105 MB) copied, 5.62173 s, 18.7 MB/s (105 MB) copied, 5.61811 s, 18.7 MB/s (105 MB) copied, 5.57817 s, 18.8 MB/s (105 MB) copied, 5.58549 s, 18.8 MB/s Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: rename usb_gadget_driver::speed to max_speedMichal Nazarewicz
This commit renames the “speed” field of the usb_gadget_driver structure to “max_speed”. This is so that to make it more apparent that the field represents the maximum speed gadget driver can support. This also make the field look more like fields with the same name in usb_gadget and usb_composite_driver structures. All of those represent the *maximal* speed given entity supports. After this commit, there are the following fields in various structures: * usb_gadget::speed - the current connection speed, * usb_gadget::max_speed - maximal speed UDC supports, * usb_gadget_driver::max_speed - maximal speed gadget driver supports, and * usb_composite_driver::max_speed - maximal speed composite gadget supports. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: replace usb_gadget::is_dualspeed with max_speedMichal Nazarewicz
This commit replaces usb_gadget's is_dualspeed field with a max_speed field. [ balbi@ti.com : Fixed DWC3 driver ] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-06treewide: Fix comment and string typo 'bufer'Paul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-29usb: udc: Fix gadget driver's speed check in various UDC driversMichal Nazarewicz
Several UDC drivers had a gadget driver's speed sanity check of the form of: driver->speed != USB_SPEED_HIGH or: driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL As more and more gadget drivers support USB SuperSpeed, driver->speed may be set to USB_SPEED_SUPER and UDC driver should handle such gadget correctly. The above checks however fail to recognise USB_SPEED_SUPER as a valid speed. This commit changes the two checks to: driver->speed < USB_SPEED_HIGH or: driver->speed < USB_SPEED_FULL respectively. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: musb: PM: fix context save/restore in suspend/resume pathKevin Hilman
Currently the driver tries to save context in the suspend path, but will cause an abort if the device is already runtime suspended. This happens, for example, if MUSB loaded/compiled-in, in host mode, but no USB devices are attached. MUSB will be runtime suspended, but then attempting a system suspend will crash due to the context save being attempted while the device is disabled. On OMAP, as of v3.1, the driver's ->runtime_suspend() callback will be called late in the suspend path (by the PM domain layer) if the driver is not already runtime suspended, ensuring a full shutdown. Therefore, the context save is not needed in the ->suspend() method since it will be called in the ->runtime_suspend() method anyways (similarily for resume.) NOTE: this leaves the suspend/resume methods basically empty (with some FIXMEs and comments, but I'll leave it to the maintainers to decide whether to remove them. Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26Merge 3.2-rc3 into usb-linusGreg Kroah-Hartman
This pulls in the latest USB bugfixes and helps a few of the drivers merge nicer in the future due to changes in both branches. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17Merge branch 'dma_slave_direction' into next_test_dirnVinod Koul
resolved conflicts: drivers/media/video/mx3_camera.c
2011-11-17USB-musb: move to dma_transfer_directionVinod Koul
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves usb/musb driver to use new enum Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
2011-11-14USB: Remove the SAW_IRQ hcd flagAlan Stern
The HCD_FLAG_SAW_IRQ flag was introduced in order to catch IRQ routing errors: If an URB was unlinked and the host controller hadn't gotten any IRQs, it seemed likely that the IRQs were directed to the wrong vector. This warning hasn't come up in many years, as far as I know; interrupt routing now seems to be well under control. Therefore there's no reason to keep the flag around any more. This patch (as1495) finally removes it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14usb: musb: fix compilation breakage introduced by de47725Felipe Balbi
commit de47725 (include: replace linux/module.h with "struct module" wherever possible) introduced a compilation breaked when it removed <linux/module.h> from <linux/device.h> which musb glue layers were (mistakenly) relying on. Include that header to fix the compile error. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-17 05:29:19 +0000