summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/omninet.c
AgeCommit message (Collapse)Author
2013-04-17USB: omninet: switch to generic read implementationJohan Hovold
Switch to the more efficient generic read implementation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: refactor read-urb processingJohan Hovold
Refactor read-urb processing, and add sanity checks on header and data lengths. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: clean up protocol definesJohan Hovold
Remove redundant data-offset define, which was really just the header length. Add payload-size define and use the bulk-out size define for the actual bulk-out size. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: clean up protocol descriptionJohan Hovold
Clean up and fix typos in protocol comment. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: use kzalloc for private dataJohan Hovold
Make sure the port private data, which contains the write sequence number, is cleared at allocation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_flip_buffer_pushJiri Slaby
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_insert_flip_stringJiri Slaby
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_string this time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: serial: remove driver version informationJohan Hovold
Remove all MODULE_VERSION macros and driver-version information (except for garmin_gps which uses it in a status reply). It is the kernel version that matters and not some private version scheme which rarely even gets updated. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25USB: omninet: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: omninet: Fix compiler warning.Greg Kroah-Hartman
I forgot to remove an unused variable. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: omninet.c: remove debug module parameterGreg Kroah-Hartman
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: serial: remove debug parameter from usb_serial_debug_data()Greg Kroah-Hartman
We should use dev_dbg() for usb_serial_debug_data() like all of the rest of the usb-serial drivers use, so remove the debug parameter as it's not needed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-13USB: omninet: fix potential tty NULL dereferenceAlexey Khoroshilov
Add check for return value of tty_port_tty_get, since it can return NULL after port hangup that may happen anytime. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-13USB: serial: omninet.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-08USB: serial: rework usb_serial_register/deregister_drivers()Greg Kroah-Hartman
This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07USB: serial: remove usb_serial_disconnect call in all driversGreg Kroah-Hartman
This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07USB: serial: remove usb_serial_probe call in all driversGreg Kroah-Hartman
This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03USB: omninet.c: remove dbg() tracing callsGreg Kroah-Hartman
dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-28USB: serial: omninet.c: use module_usb_serial_driverGreg Kroah-Hartman
This converts the omninet.c driver to use the module_usb_serial_driver() call instead of having to have a module_init/module_exit function, saving a lot of duplicated code. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24usb-serial: use new registration API in [n-p]* driversAlan Stern
This patch (as1527) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: navman, omninet, opticon, option, oti6858, and pl2303. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10USB: serial: use dev_err_console in custom write pathsJohan Hovold
Use dev_err_console in write paths for devices which can be used as a console but do not use the generic write implementation. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-15USB: serial: remove unnecessary bulk-urb re-fillsJohan Hovold
Remove unnecessary re-fills of bulk urbs whose fields have not changed since port probe. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: remove unnecessary reinitialisations of urb->devJohan Hovold
Remove unnecessary reinitialisations of urb->dev before each submission, which were based on the (no longer valid) assumption that serial->dev will be set to NULL on close. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Support Department <support@connecttech.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: omninet: clean up write-urb busy handlingJohan Hovold
Use port write_urbs_free mask rather than write_urb_busy field in struct serial_port. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: omninet: fix write_roomJohan Hovold
Fix regression introduced by commit 507ca9bc047666 ([PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.) which inverted the logic in write_room so that it returns zero when the write urb is actually free. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: remove changelogs and old todo entriesJohan Hovold
Remove remaining changelogs from file headers (can still be retrieved through git). Remove even older changelog entries stored in Changelog.history. Remove outdated todo entries from belkin_sa. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10drivers/usb: Remove unnecessary return's from void functionsJoe Perches
Greg prefers this to go through the trivial tree. http://lkml.org/lkml/2010/6/24/1 There are about 2500 void functions in drivers/usb Only a few used return; at end of function. Standardize them a bit. Moved a statement down a line in drivers/usb/host/u132-hcd.c Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-02USB: Convert concatenated __FILE__ to %s, __FILE__Joe Perches
Reduces string space a bit Neaten a macro redefine of dbg Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: serial: Remove unnecessary \n's from dbg usesJoe Perches
#define dbg adds the newline, messages shouldn't. Converted dbg("%s", "some string") to dbg("some string") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB serial: make USB device id constantNémeth Márton
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: USB does not need the filp argument in the driversAlan Cox
And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: usb-serial: replace shutdown with disconnect, releaseAlan Stern
This patch (as1254) splits up the shutdown method of usb_serial_driver into a disconnect and a release method. The problem is that the usb-serial core was calling shutdown during disconnect handling, but drivers didn't expect it to be called until after all the open file references had been closed. The result was an oops when the close method tried to use memory that had been deallocated by shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-11tty: Bring the usb tty port structure into more useAlan Cox
This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-17USB: remove use of err() in drivers/usb/serialGreg Kroah-Hartman
err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb/serial driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13tty: usb-serial krefsAlan Cox
Use kref in the USB serial drivers so that we don't free tty structures from under the URB receive handlers as has historically been the case if you were unlucky. This also gives us a framework for general tty drivers to use tty_port objects and refcount. Contains two err->dev_err changes merged together to fix clashes in the -next tree. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22omninet: Use string flip functionsAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22tty-usb-omninet: Coding styleAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22usb_serial: API all changeAlan Cox
USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24USB: remove unnecessary type casting of urb->contextMing Lei
urb->context code cleanup Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24usb serial: more fixes and groundwork for tty changesAlan Cox
- If a termios change fails due to lack of memory we should copy the old settings back over as the device has not changed - Note various locking problems - kl5kusb105 had various remaining tty flag handling problems - Make safe_serial use tty_insert_flip_string not open coded loops - set termios speed properly in usb_serial Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: serial: remove unneeded number endpoints settingsGreg Kroah-Hartman
The usb-serial core no longer checks these fields so remove them from all of the individual drivers. They will be removed from the usb-serial core in a patch later in the series. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: serial: omninet: clean up urb->status usageGreg Kroah-Hartman
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: fix up license wording on some of my usb-serial driversGreg Kroah-Hartman
Also update the copyright date on the pl2303 driver, as it was out of date. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fix omninet memory leak found by coverityOliver Neukum
the transfer of allocating the descriptor in attach and no longer in open was incomplete resulting in a memory leak coverity spotted. This fix is against the patch set you posted. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix omninet write vs. close raceOliver Neukum
omninet kills all URBs in close. However write() returns as soon as the URB has been submitted. Killing the last URB means a race that can lose that date written in the last call to write(). As a fix this is moved to shutdown(). Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: omninet memory leak in error caseOliver Neukum
memory allocated must be freed in the error case. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB serial: add driver pointer to all usb-serial driversJohannes Hölzl
Every usb serial driver should have a pointer to the corresponding usb driver. So the usb serial core can add a new id not only to the usb serial driver, but also to the usb driver. Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag no_dynamic_id=1. This is added now. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>