summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/qcserial.c
AgeCommit message (Collapse)Author
2015-01-07USB: qcserial/option: make AT URCs work for Sierra Wireless MC73xxReinhard Speyerer
As has been discussed in the thread starting with https://lkml.kernel.org/g/549748e9.d+SiJzqu50f1r4lSAL043YSc@arcor.de Sierra Wireless MC73xx devices with USB VID/PID 0x1199:0x68c0 require the option_send_setup() code to be used on the USB interface for the AT port to make unsolicited response codes work correctly. Move these devices from the qcserial driver where they have been added by commit 70a3615fc07c2330ed7c1e922f3c44f4a67c0762 ("usb: qcserial: add Sierra Wireless MC73xx") to the option driver and add a MC73xx-specific blacklist to ensure that 1. the sendsetup code is not used for the DIAG/DM and NMEA interfaces 2. the option driver does not attach to the QMI/network interfaces Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-19USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G ModemMartin Hauke
Added new device layout "DEVICE_HWI" and also added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-05-29usb: qcserial: add additional Sierra Wireless QMI devicesAleksander Morgado
A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Link: http://marc.info/?l=linux-usb&m=140136310027293&w=2 Cc: <stable@vger.kernel.org> # backport in link above Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28usb: qcserial: add Netgear AirCard 341UAleksander Morgado
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: qcserial: remove interface number matchingBjørn Mork
Matching on interface numbers was not such a good idea for multi-function serial devices after all. It is much better do create well defined device layouts, allowing a single match entry per device. Remove this now unused code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: qcserial: define and use Sierra Wireless layoutBjørn Mork
All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: qcserial: refactor device layout selectionBjørn Mork
Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: qcserial: fix multiline comment coding styleBjørn Mork
Use a consistent style for all multiline comments. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03usb: qcserial: add a number of Dell devicesBjørn Mork
Dan writes: "The Dell drivers use the same configuration for PIDs: 81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card 81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card 81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card 81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card 81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card These devices are all clearly Sierra devices, but are also definitely Gobi-based. The A8 might be the MC7700/7710 and A9 is likely a MC7750. >From DellGobi5kSetup.exe from the Dell drivers: usbif0: serial/firmware loader? usbif2: nmea usbif3: modem/ppp usbif8: net/QMI" Cc: <stable@vger.kernel.org> Reported-by: AceLan Kao <acelan.kao@canonical.com> Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-25usb: qcserial: add Sierra Wireless MC7305/MC7355Bjørn Mork
Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-25usb: qcserial: add Sierra Wireless MC73xxBjørn Mork
Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-25usb: qcserial: add Sierra Wireless EM7355Bjørn Mork
Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-05usb: qcserial: add Netgear Aircard 340UBjørn Mork
This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24USB: option,qcserial: move Novatel Gobi1K IDs to qcserialDan Williams
These devices are all Gobi1K devices (according to the Windows INF files) and should be handled by qcserial instead of option. Their network port is handled by qmi_wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03USB: serial: Add Option GTM681W to qcserial device table.Richard Weinberger
The Option GTM681W uses a qualcomm chip and can be served by the qcserial device driver. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-13qcserial: bind to DM/DIAG port on Gobi 1K devicesDan Williams
Turns out we just need altsetting 1 and then we can talk to it. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-30USB: qcserial: add Telit Gobi QDL deviceDaniele Palmas
Add VID and PID for Telit Gobi QDL device Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25USB: qcserial: fix interface-data memory leak in error pathJohan Hovold
Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25USB: usb-wwan: fix multiple memory leaks in error pathsJohan Hovold
Fix port-data memory leak in usb-serial probe error path by moving port data allocation to port_probe. Since commit a1028f0abf ("usb: usb_wwan: replace release and disconnect with a port_remove hook") port data is deallocated in port_remove. This leaves a possibility for memory leaks if usb-serial probe fails after attach but before the port in question has been successfully registered. Note that this patch also fixes two additional memory leaks in the error path of attach should port initialisation fail for any port as the urbs were never freed and neither was the data of any of the successfully initialised ports. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: qcserial.c: remove debug module parameterGreg Kroah-Hartman
Now that the dbg() macro is no longer being used in the driver, the debug module parameter doesn't do anything at all. So remove it so as to not confuse people. CC: "Bjørn Mork" <bjorn@mork.no> CC: Dan Williams <dcbw@redhat.com> CC: Thomas Tuttle <ttuttle@chromium.org> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16USB: qcserial: fix port handling on Gobi 1K and 2K+Dan Williams
Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10usb: usb_wwan: replace release and disconnect with a port_remove hookBjørn Mork
Doing port specific cleanup in the .port_remove hook is a lot simpler and safer than doing it in the USB driver .release or .disconnect methods. The removal of the port from the usb-serial bus will happen before the USB driver cleanup, so we must be careful about accessing port specific driver data from any USB driver functions. This problem surfaced after the commit 0998d0631 device-core: Ensure drvdata = NULL when no driver is bound which turned the previous unsafe access into a reliable NULL pointer dereference. Fixes the following Oops: [ 243.148471] BUG: unable to handle kernel NULL pointer dereference at (null) [ 243.148508] IP: [<ffffffffa0468527>] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.148556] PGD 79d60067 PUD 79d61067 PMD 0 [ 243.148590] Oops: 0000 [#1] SMP [ 243.148617] Modules linked in: sr_mod cdrom qmi_wwan usbnet option cdc_wdm usb_wwan usbserial usb_storage uas fuse af_packet ip6table_filter ip6_tables iptable_filter ip_tables x_tables tun edd cpufreq_conservative cpufreq_userspace cpufreq_powersave snd_pcm_oss snd_mixer_oss acpi_cpufreq snd_seq mperf snd_seq_device coretemp arc4 sg hp_wmi sparse_keymap uvcvideo videobuf2_core videodev videobuf2_vmalloc videobuf2_memops rtl8192ce rtl8192c_common rtlwifi joydev pcspkr microcode mac80211 i2c_i801 lpc_ich r8169 snd_hda_codec_idt cfg80211 snd_hda_intel snd_hda_codec rfkill snd_hwdep snd_pcm wmi snd_timer ac snd soundcore snd_page_alloc battery uhci_hcd i915 drm_kms_helper drm i2c_algo_bit ehci_hcd thermal usbcore video usb_common button processor thermal_sys [ 243.149007] CPU 1 [ 243.149027] Pid: 135, comm: khubd Not tainted 3.5.0-rc7-next-20120720-1-vanilla #1 Hewlett-Packard HP Mini 110-3700 /1584 [ 243.149072] RIP: 0010:[<ffffffffa0468527>] [<ffffffffa0468527>] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.149118] RSP: 0018:ffff880037e75b30 EFLAGS: 00010286 [ 243.149133] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88005912aa28 [ 243.149150] RDX: ffff88005e95f028 RSI: 0000000000000000 RDI: ffff88005f7c1a10 [ 243.149166] RBP: ffff880037e75b60 R08: 0000000000000000 R09: ffffffff812cea90 [ 243.149182] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88006539b440 [ 243.149198] R13: ffff88006539b440 R14: 0000000000000000 R15: 0000000000000000 [ 243.149216] FS: 0000000000000000(0000) GS:ffff88007ee80000(0000) knlGS:0000000000000000 [ 243.149233] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 243.149248] CR2: 0000000000000000 CR3: 0000000079fe0000 CR4: 00000000000007e0 [ 243.149264] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 243.149280] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 243.149298] Process khubd (pid: 135, threadinfo ffff880037e74000, task ffff880037d40600) [ 243.149313] Stack: [ 243.149323] ffff880037e75b40 ffff88006539b440 ffff8800799bc830 ffff88005f7c1800 [ 243.149348] 0000000000000001 ffff88006539b448 ffff880037e75b70 ffffffffa04685e9 [ 243.149371] ffff880037e75bc0 ffffffffa0473765 ffff880037354988 ffff88007b594800 [ 243.149395] Call Trace: [ 243.149419] [<ffffffffa04685e9>] usb_wwan_disconnect+0x9/0x10 [usb_wwan] [ 243.149447] [<ffffffffa0473765>] usb_serial_disconnect+0xd5/0x120 [usbserial] [ 243.149511] [<ffffffffa0046b48>] usb_unbind_interface+0x58/0x1a0 [usbcore] [ 243.149545] [<ffffffff8139ebd7>] __device_release_driver+0x77/0xe0 [ 243.149567] [<ffffffff8139ec67>] device_release_driver+0x27/0x40 [ 243.149587] [<ffffffff8139e5cf>] bus_remove_device+0xdf/0x150 [ 243.149608] [<ffffffff8139bc78>] device_del+0x118/0x1a0 [ 243.149661] [<ffffffffa0044590>] usb_disable_device+0xb0/0x280 [usbcore] [ 243.149718] [<ffffffffa003c6fd>] usb_disconnect+0x9d/0x140 [usbcore] [ 243.149770] [<ffffffffa003da7d>] hub_port_connect_change+0xad/0x8a0 [usbcore] [ 243.149825] [<ffffffffa0043bf5>] ? usb_control_msg+0xe5/0x110 [usbcore] [ 243.149878] [<ffffffffa003e6e3>] hub_events+0x473/0x760 [usbcore] [ 243.149931] [<ffffffffa003ea05>] hub_thread+0x35/0x1d0 [usbcore] [ 243.149955] [<ffffffff81061960>] ? add_wait_queue+0x60/0x60 [ 243.150004] [<ffffffffa003e9d0>] ? hub_events+0x760/0x760 [usbcore] [ 243.150026] [<ffffffff8106133e>] kthread+0x8e/0xa0 [ 243.150047] [<ffffffff8157ec04>] kernel_thread_helper+0x4/0x10 [ 243.150068] [<ffffffff810612b0>] ? flush_kthread_work+0x120/0x120 [ 243.150088] [<ffffffff8157ec00>] ? gs_change+0xb/0xb [ 243.150101] Code: fd 41 54 53 48 83 ec 08 80 7f 1a 00 74 57 49 89 fc 31 db 90 49 8b 7c 24 20 45 31 f6 48 81 c7 10 02 00 00 e8 bc 64 f3 e0 49 89 c7 <4b> 8b 3c 37 49 83 c6 08 e8 4c a5 bd ff 49 83 fe 20 75 ed 45 30 [ 243.150257] RIP [<ffffffffa0468527>] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.150282] RSP <ffff880037e75b30> [ 243.150294] CR2: 0000000000000000 [ 243.177170] ---[ end trace fba433d9015ffb8c ]--- Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Thomas Schäfer <tschaefer@t-online.de> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16USB: qcserial: adding Sierra Wireless devicesBjørn Mork
The QMI mode of the Sierra Wireless MC7710 is close to a Gobi device, and also identified as one by the Windows drivers provided by Sony. The serial interfaces are the same as for any other Gobi module, but the USB interface layout is different: 0: DM/DIAG (also present in bootloader mode) 2: NMEA 3: AT-capable modem port 8: QMI/net 19: QMI/net (not always present) 20: QMI/net (not always present) Note in particular that the NMEA and AT ports are reversed compared to a Gobi 2k+ device, and that the DM port appears as a QDL port in bootloader mode using the same device ID. The Sony driver also document two new devices with standard Gobi 2k+ layout (1199:68a5, 1199:68a9) having a QDL mode (1199:68a4, 1199:68a8). Adding these as well. Lenovo Windows drivers document the USB interface layout for a few additional Sierra Wireless devices. Adding these while at it: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with the same layout as MC7710 - MC7750 (114f:68a2) with the same layout as MC7710 - EM7700 (1199:901c) with the same layout as MC7710 Cc: Anton Samokhvalov <pg83@yandex.ru> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16USB: qcserial: support generic Qualcomm serial portsBjørn Mork
No need to verify the interface layout when doing interface number based matching. We can safely trust the device ID table in this case. This allows the driver to support any USB interface layout for non-Gobi 1k/2k+ devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16USB: qcserial: make probe more flexibleBjørn Mork
Preparing qcprobe support for more than just strict Gobi 1k or 2k+ devices. Many newer Qualcomm based devices provide the same serial ports, but using varying USB interface layouts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16USB: qcserial: centralize probe exit pathBjørn Mork
Creating a common exit path from qcprobe to make it easier to extend it. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16USB: qcserial: consolidate usb_set_interface callsBjørn Mork
No need to replicate the same code all over the place. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: qcserial: Add Sierra Wireless device IDsBjørn Mork
Some additional IDs found in the BSD/GPL licensed out-of-tree GobiSerial driver from Sierra Wireless. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-15USB: qcserial.c: remove dbg() usageGreg Kroah-Hartman
dbg() is a usb-serial specific macro. This patch converts the qcserial.c driver to use dev_dbg() instead to tie into the dynamic debug infrastructure. CC: Thomas Tuttle <ttuttle@chromium.org> CC: Alan Stern <stern@rowland.harvard.edu> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-08USB: serial: rework usb_serial_register/deregister_drivers()Greg Kroah-Hartman
This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07USB: serial: remove usb_serial_disconnect call in all driversGreg Kroah-Hartman
This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07USB: serial: remove usb_serial_probe call in all driversGreg Kroah-Hartman
This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07usb-serial: clean up unneeded PM-related fieldsAlan Stern
This patch (as1551) cleans up the PM-related entries in the usb_driver structures of the various USB serial driver modules. Those entries are now filled in by the usb-serial core during driver registration, so they don't need to be initialized explicitly in the source code. The same is true of the one remaining no_dynamic_id entry. reset_resume remains a small problem, because the serial core doesn't support it. The patch ignores these entries. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03USB: qcserial.c: remove dbg() tracing callsGreg Kroah-Hartman
dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Thomas Tuttle <ttuttle@chromium.org> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Rigbert Hamisch <rigbert@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-28USB: serial: qcserial.c: use module_usb_serial_driverGreg Kroah-Hartman
This converts the qcserial.c driver to use the module_usb_serial_driver() call instead of having to have a module_init/module_exit function, saving a lot of duplicated code. CC: Steven Hardy <shardy@redhat.com> CC: Thomas Tuttle <ttuttle@chromium.org> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24USB: qcserial: don't grab QMI port on Gobi 1000 devicesDan Williams
Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24usb-serial: use new registration API in [q-s]* driversAlan Stern
This patch (as1528) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: qcaux, qcserial, safe_serial, siemens_mpi, sierra, spcp8x5, ssu100, and symbolserial. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-01USB: qcserial: don't enable autosuspendThomas Tuttle
We've found that qcserial devices will not always wake up reliably from autosuspend, so disable it. Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-02-01USB: qcserial: add several new serial devicesThomas Tuttle
Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-10-31usb: Add module.h to drivers/usb consumers who really use it.Paul Gortmaker
The situation up to this point meant that module.h was pretty much everywhere, regardless of whether you asked for it or not. We are fixing that, so give the USB folks who want it an actual include of it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-29USB: qcserial: add device ID for "HP un2430 Mobile Broadband Module"Rigbert Hamisch
add device ID for "HP un2430 Mobile Broadband Module" Signed-off-by: Rigbert Hamisch <rigbert@gmx.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20USB: qcserial: Add support for Sierra Wireless MC8355/Gobi 3000Richard Hartmann
Simple patch to make qcserial recognize the USB id of the Sierra Wireless MC8355 which is based on the Gobi 3000 chip. Both UMTS and GPS work fine. Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-10USB: Serial: Add device ID for Sierra Wireless MC8305Florian Echtler
A new device ID pair is added for Sierra Wireless MC8305. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: Serial: Added device ID for Qualcomm Modem in Sagemcom's HiLo3GVijay Chavan
A new device ID pair is added for Qualcomm Modem present in Sagemcom's HiLo3G module. Signed-off-by: Vijay Chavan <VijayChavan007@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: qcserial add missing errorpath kfreesSteven Hardy
There are two -ENODEV error paths in qcprobe where the allocated private data is not freed, this patch adds the two missing kfrees to avoid leaking memory on the error path Signed-off-by: Steven Hardy <shardy@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: qcserial avoid pointing to freed memorySteven Hardy
Rework the qcprobe logic such that serial->private is not set when qcprobe exits with -ENODEV, otherwise serial->private will point to freed memory on -ENODEV Signed-off-by: Steven Hardy <shardy@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: Fix qcserial memory leak on rmmodSteven Hardy
qcprobe function allocates serial->private but this is never freed, this patch adds a new function qc_release() which frees serial->private, after calling usb_wwan_release Signed-off-by: Steven Hardy <shardy@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: qcserial: Enable Diagnostics Monitor and GPS ports on Gobi 2000Matthias G. Eckermann
this patch to qcserial.c enables the Diagnostics Monitor and NMEA GPS ports on Qualcomm Gobi 2000 devices. A Gobi 2000 device will provide 3 serial ports: # /dev/ttyUSB0 -> Diagnostics # /dev/ttyUSB1 -> 3G Modem # /dev/ttyUSB2 -> NMEA GPS port * The Diagnostics Monitor uses Qualcomm's DM protocol; I used libqcdm (ModemManager) to talk to it, found it working, but at least DM commands 12 and 64 are not implemented on my device (Gobi 2000 built into Thinkpad x100e). * Functionality of the 3G Modem port remains unchanged. * The GPS port and how to enable it has been confirmed now in the Gobi 3000 source code at: https://www.codeaurora.org/patches/quic/gobi/ Enable/disable GPS via: echo "\$GPS_START" > /dev/ttyUSB2 # use GPS echo "\$GPS_STOP" > /dev/ttyUSB2 Signed-off-by: Matthias G. Eckermann <mge@arcor.de>
2010-10-22USB: serial: Enable USB autosuspend by default on qcserialMatthew Garrett
Seems to work fine in my testing. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-17 03:02:46 +0000