summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2010-06-04USB: serial: digi_acceleport: Eliminate a NULL pointer dereferenceJulia Lawall
If port is NULL, then the call to dev_err will dereference a value that is a small offset from NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: ftdi_sio: fix DTR/RTS line modesDaniel Mack
Call set_mctrl() and clear_mctrl() according to the flow control mode selected. This makes serial communication for FT232 connected devices work when CRTSCTS is not set. This fixes a regression introduced by 4175f3e31 ("tty_port: If we are opened non blocking we still need to raise the carrier"). This patch calls the low-level driver's dtr_rts() function which consequently sets TIOCM_DTR | TIOCM_RTS. A later call to set_termios() without CRTSCTS in cflags, however, does not reset these bits, and so data is not actually sent out on the serial wire. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: mos7840: fix null-pointer dereferenceJohan Hovold
Fix null-pointer dereference on error path. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ftdi_sio: fix legacy SIO-device headerJohan Hovold
Length field of header was incorrectly set to available payload space rather than the actual payload size. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: kl5usb105: reimplement using generic frameworkJohan Hovold
Kill custom read and write implementations (static per-port, singleton(!) urb pool). Also remove changelog header (can be retrieved through git). Read processing and write-buffer handling tested using a cp210x device in a loopback setup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: kl5usb105: minor clean upsJohan Hovold
Whitespace changes and some removed comments. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: kl5usb105: fix memory leakJohan Hovold
Private data was not freed on error path in startup. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: io_ti: use kfifo to implement write bufferingJohan Hovold
Kill custom fifo implementation. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: io_ti: remove unsused private counterJohan Hovold
Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ti_usb: use kfifo to implement write bufferingJohan Hovold
Kill custom fifo implementation. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ir-usb: fix incorrect write-buffer lengthJohan Hovold
Returned length should include header length. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: aircable: fix incorrect write-buffer lengthJohan Hovold
Returned length should include header length. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: safe_serial: straighten out read processingJohan Hovold
Clean up read processing logic. Tested using a cp210x device in a loopback setup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: safe_serial: reimplement read using generic frameworkJohan Hovold
Use process_read_urb to implement read processing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: safe_serial: reimplement write using generic frameworkJohan Hovold
Kill custom single-urb write implementation. Note that this driver still depended on the write callback from the old generic framework. Tested against original read processing using a cp210x device in a loopback setup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: oti6858: use port write fifoJohan Hovold
Kill private write fifo and use port fifo instead (protected under port lock). Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: oti6858: use kfifo to implement write bufferingJohan Hovold
Kill custom fifo implementation. Use private write fifo to minimise changes to lock handling. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: cypress_m8: use kfifo to implement write bufferingJohan Hovold
Kill custom fifo implementation. Note that cypress_m8 has no port write fifo as it has no bulk-out endpoint. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: cypress_m8: remove unused drain defineJohan Hovold
Driver uses tty-port drain these days. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: usb_debug: set bulk out size at probeJohan Hovold
Use bulk_out_size in usb_serial_driver to set urb buffer size. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: CP210x New Device IDs 11 New device IDsCraig Shelley
Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: visor: increase bulk-out buffer sizeJohan Hovold
Increase the bulk-out buffer size to avoid any regression in throughput after replacing the old writing scheme which used dynamic buffers (e.g. up to 2k). 256b has been determined to be a good choice for several drivers including ftdi_sio which used to have a more or less identical write implementation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: belkin_sa: implement line status handlingJohan Hovold
Use process_read_urb to implement line status handling. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: belkin_sa: clean up openJohan Hovold
Use generic open to submit read urb. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: belkin_sa: minor clean-upsJohan Hovold
Remove some whitepace and comments. Clean up close. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: cp210x: use generic open to start reading from deviceJohan Hovold
Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: visor: reimplement using generic frameworkJohan Hovold
Kill custom read and write implementations (dynamically allocated write urbs). Note that I chose to remove the stat module parameter which was supposed to keep count of the amount of data sent and received, but which has been broken for three years (since b308e74d9c708ee2a9af14fbe235e0a41216f4ed "USB: visor driver adapted to new tty buffering" -- bytes_in was incorrectly updated and was thus always reported as 0). Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: visor: fix memory leakJohan Hovold
Fix memory leak for some devices (Sony Clie 3.5) due to port private data not being freed on release. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: spcp8x5: reimplement using generic frameworkJohan Hovold
Kill custom fifo, read, and single-urb write implementations. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ipaq: reimplement using generic frameworkJohan Hovold
Kill custom fifo, read and write implementations (single-urb and fifo, but still maintained list of 256*256b urb buffers per port). Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: empeg: reimplement using generic frameworkJohan Hovold
Kill custom read and write implementations (static 16*4k write-urb pool shared among all ports in system). Also remove old changelog entries in header (code is now gone, and these entries can still be retrieved through git). Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: serial: add special case for processing of empty read urbsJohan Hovold
Return immediately from generic process_read_urb if urb is empty. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: kobil: fix memory leakJohan Hovold
An urb transfer buffer is allocated at every open but was never freed. This driver is a bit of a mess... Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: option.c: OLIVETTI OLICARD100 supportNils Radtke
This patch adds support for an olivetti olicard100 HЅDPA usb-stick. This device is a zeroCD one with ID 0b3c:c700 that needs switching via eject or usb-modeswitch with MessageContent="5553424312345678000000000000061b000000030000000000000000000000". After switching it has ID 0b3c:c000 and provides 5 serial ports ttyUSB[0-4]. Port 0 (modem) and 4 are interrupt ports. Signed-off-by: Nils Radtke <lkml@Think-Future.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: visor.h: checkpatch cleanupsGreg Kroah-Hartman
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: pl2303.h: checkpatch cleanupsGreg Kroah-Hartman
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: kobil_sct.h: checkpatch cleanupsGreg Kroah-Hartman
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: kl5kusb105.h: checkpatch cleanupsGreg Kroah-Hartman
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: io_edgeport: checkpatch cleanupsGreg Kroah-Hartman
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ftdi_sio: checkpatch cleanupsGreg Kroah-Hartman
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: cypress_m8.h: checkpatch cleanupsGreg Kroah-Hartman
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: belkin_sa.h: checkpatch cleanupsGreg Kroah-Hartman
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: mct_u232.h: checkpatch cleanupsGreg Kroah-Hartman
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: cp210x: remove redundant disconnect()Johan Hovold
Remove cp210x_disconnect which is used to kill traffic although this is already handled by the generic framework. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: io_edgeport: Use kzallocJulia Lawall
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ipw: reimplement using generic frameworkJohan Hovold
Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ipw: remove dummy port_probe and port_removeJohan Hovold
Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ipw: clean up dtr-rts handlingJohan Hovold
No need to raise dtr/rts in open as this is taken care of by tty layer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ir-usb: reimplement using generic frameworkJohan Hovold
Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ir-usb: fix set_termios raceJohan Hovold
Use dynamically allocated urb for baudrate changes rather than unconditionally submitting the port write urb which may already be in use. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-08 14:52:22 +0000