summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)Author
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits) usbcore: remove unused argument in autosuspend USB: keep count of unsuspended children USB hub: simplify remote-wakeup handling USB: struct usb_device: change flag to bitflag OHCI: make autostop conditional on CONFIG_PM USB: Add autosuspend support to the hub driver EHCI: Fix root-hub and port suspend/resume problems USB: create a new thread for every USB device found during the probe sequence USB: add driver for the USB debug devices USB: added dynamic major number for USB endpoints USB: pegasus error path not resetting task's state USB: endianness fix for asix.c USB: build the appledisplay driver USB serial: replace kmalloc+memset with kzalloc USB: hid-core: canonical defines for Apple USB device IDs USB: idmouse cleanup USB: make drivers/usb/core/driver.c:usb_device_match() static USB: lh7a40x_udc remove double declaration USB: pxa2xx_udc recognizes ixp425 rev b0 chip usbtouchscreen: add support for DMC TSC-10/25 devices ...
2006-12-01usbcore: remove unused argument in autosuspendAlan Stern
Thanks to several earlier patches, usb_autosuspend_device() and usb_autoresume_device() are never called with a second argument other than 1. This patch (as819) removes the now-redundant argument. It also consolidates some common code between those two routines, putting it into a new subroutine called usb_autopm_do_device(). And it includes a sizable kerneldoc update for the affected functions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: keep count of unsuspended childrenAlan Stern
This patch (as818b) simplifies autosuspend processing by keeping track of the number of unsuspended children of each USB hub. This will permit us to avoid a good deal of unnecessary work all the time; we will no longer have to create a bunch of workqueue entries to carry out autosuspend requests, only to have them fail because one of the hub's children isn't suspended. The basic idea is simple. There already is a usage counter in the usb_device structure for preventing autosuspends. The patch just increments that counter for every unsuspended child. There's only one tricky part: When a device disconnects we need to remember whether it was suspended at the time (leave the counter alone) or not (decrement the counter). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB hub: simplify remote-wakeup handlingAlan Stern
This patch (as817) simplifies the remote-wakeup processing in the hub driver. Now instead of using a specialized code path, it relies on the standard USB resume routines. The hub_port_resume() function does an initial get_port_status() to see whether the port has already resumed itself (as it does when a remote-wakeup request is sent). This will slow down handling of other resume events slightly, but not enough to matter. The patch also changes the hub_port_status() routine, making it return an error if a short reply is received. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: struct usb_device: change flag to bitflagAlan Stern
This patch (as816) changes an existing flag in the usb_device structure to a bitflag, preparing the way for more bitflags to come in the future. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01OHCI: make autostop conditional on CONFIG_PMAlan Stern
Unlike UHCI, OHCI does not exert any DMA load on the system when no devices are connected. Consequently there is no advantage to doing an autostop other than the power savings, so we shouldn't compile the necessary code unless CONFIG_PM is enabled. This patch (as820) makes the root-hub suspend and resume routines conditional on CONFIG_PM. It also prevents autostop from activating if the device_may_wakeup flag isn't set; some people use this flag to alert the driver about Resume-Detect bugs in the hardware. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: Add autosuspend support to the hub driverAlan Stern
This patch (as742b) adds autosuspend/autoresume support to the USB hub driver. The largest aspect of the change is that we no longer need a special flag for root hubs that want to be resumed. Now every hub is autoresumed whenever khubd needs to access it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01EHCI: Fix root-hub and port suspend/resume problemsAlan Stern
This patch (as738b) fixes numerous problems in the controller/root-hub suspend/resume/remote-wakeup support in ehci-hcd: The bus_resume() routine should wake up only the ports that were suspended by bus_suspend(). Ports that were already suspended should remain that way. The interrupt mask is used to detect loss of power in the bus_resume() routine (if the mask is 0 then power was lost). However bus_suspend() always sets the mask to 0. Instead the mask should retain its normal value, with port-change-detect interrupts disabled if remote wakeup is turned off. The interrupt mask should be reset to its correct value at the end of bus_resume() regardless of whether power was lost. bus_resume() reinitializes the operational registers if power was lost. However those registers are not in the aux power well, hence they can lose their values whenever the controller is put into D3. They should always be reinitialized. When a port-change interrupt occurs and the root hub is suspended, the interrupt handler should request a root-hub resume instead of starting up the controller all by itself. There's no need for the interrupt handler to request a root-hub resume every time a suspended port sends a remote-wakeup request. The pci_resume() method doesn't need to check for connected ports when deciding whether or not to reset the controller. It can make that decision based on whether Vaux power was maintained. Even when the controller does not need to be reset, pci_resume() must undo the effect of pci_suspend() by re-enabling the interrupt mask. If power was lost, pci_resume() must not call ehci_run(). At this point the root hub is still supposed to be suspended, not running. It's enough to rewrite the command register and set the configured_flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: create a new thread for every USB device found during the probe sequenceGreg Kroah-Hartman
Might speed up some systems. If nothing else, a bad driver should not take the whole USB subsystem down with it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: add driver for the USB debug devicesGreg Kroah-Hartman
It's a simple usb-serial driver that just creates a tty device to read and write from. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: added dynamic major number for USB endpointsSarah Bailey
This patch is an update for Greg K-H's proposed usbfs2: http://sourceforge.net/mailarchive/message.php?msg_id=19295229 It creates a dynamic major for USB endpoints and fixes the endpoint minor calculation. Signed-off-by: Sarah Bailey <saharabeara@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: pegasus error path not resetting task's stateOliver Neukum
there is an error path in the pegasus driver which can leave the task in TASK_UNINTERRUPTIBLE. Depending on when it schedules next, this can be bad. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: endianness fix for asix.cOliver Neukum
the latest update for asix.c reverted some endianness fixes. This reinstates them. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: build the appledisplay driverAdrian Bunk
We do already have both the code and a config option, so why not build this driver? ;-) Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB serial: replace kmalloc+memset with kzallocBurman Yan
Replace kmalloc+memset with kzalloc Signed-off-by: Yan Burman <yan_952@hotmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: hid-core: canonical defines for Apple USB device IDsJulien BLACHE
Use canonical defines for the Apple USB device IDs. Also add the Geyser IV devices missing in my previous patch. Signed-off-by: Julien BLACHE <jb@jblache.org> Acked-by: Dmitry Torokhov <dtor@insightbb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: idmouse cleanupMariusz Kozlowski
Just digging through code and found these needless variable initializations. So here is the patch. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: make drivers/usb/core/driver.c:usb_device_match() staticAdrian Bunk
usb_device_match() can now become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: lh7a40x_udc remove double declarationDavid Brownell
Remove minor double-declaration goof. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: pxa2xx_udc recognizes ixp425 rev b0 chipDavid Brownell
Make the pxa2xx_udc driver recognize a newer revision of the IXP425 chip. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usbtouchscreen: add support for DMC TSC-10/25 devicesHolger Schurig
Adds support for the DMC TSC-10 and TSC-25 usb touchscreen controllers. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: ftdi-elan.c: fixes and cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make the needlessly global ftdi_release_platform_dev() static - remove the unused usb_ftdi_elan_read_reg() - proper prototypes for the following functions: - usb_ftdi_elan_read_pcimem() - usb_ftdi_elan_write_pcimem() Note that the misplaced prototypes for the latter ones in drivers/usb/host/u132-hcd.c were buggy. Depending on the calling convention of the architecture calling one of them could have turned your stack into garbage. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: make drivers/usb/host/u132-hcd.c:u132_hcd_wait staticAdrian Bunk
This patch makes the needlessly global "u132_hcd_wait" static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: cypress_m8 init error path fixMariusz Kozlowski
If at some point cypress_init() fails deregister only the resources that were registered until that point. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: add ehci_hcd.ignore_oc parameterDavid Brownell
Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spam syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short circuited cables. Note that the bulk of these reports seem to be with VIA southbridges, but I think some were with Intel ones. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: EHCI hooks for high speed electrical testsDavid Brownell
EHCI hooks for high speed electrical tests of the root hub ports. The expectation is that a usermode program actually triggers the test, making the same control request it would make for an external hub. Tests for peripheral upstream ports would issue a different request. In all cases, the hardware needs re-initialization before it could be used "normally" again (e.g. unplug/replug, rmmod/modprobe). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: net2280: don't send unwanted zero-length packetsAlan Stern
The net2280 driver is too eager to send zero-length packets when IN tokens are received on ep0. No such packet should be sent (the driver should NAK) before the gadget driver has queued the proper response. Otherwise deferred responses are impossible. This patch (as823) makes net2280 avoid sending ZLPs for IN transfers on ep0 until a response has been submitted, and avoids stalling when an OUT packet is received before a request has been submitted for an OUT transfer on ep0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: microtek possible memleak fixMariusz Kozlowski
Possible memleak fix on error path. The changes: - out_kfree2 and out_free_urb replaced - missing scsi_host_put() added Here it goes: Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: add Digitech USB-Storage to unusual_devs.hJaco Kroon
The mass storage device from Digitech designed for Flash Cards, as found on (for example) the GNX4 device has issues with residue, similar to the bug report at http://kerneltrap.org/node/6297. This patch adds the faulty storage device to unusual_devs.h, this not only reduces the noise in dmesg but also increases the transfer speeds by a factor of 7x for me (89kB/s -> 637kB/s). T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1210 ProdID=0003 Rev= 1.00 S: Manufacturer=DigiTech HMG S: Product=DigiTech Mass Storage C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Jaco Kroon <jaco@kroon.co.za> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB core: fix compiler warning about usb_autosuspend_workAlan Stern
This patch (as821) fixes a compiler warning when CONFIG_PM isn't on ("usb_autosuspend_work" defined but not used). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: fix aircable.c: inconsequent NULL checkingNaranjo Manuel Francisco
> 2006/11/11, Adrian Bunk <bunk@stusta.de>: > > The Coverity checker spotted the following in > > drivers/usb/serial/aircable.c: > > > > <-- snip --> > > > > ... > > static void aircable_read(void *params) > > { > > ... Hi everyone, Sorry for the long time response but here is the patch, I think this way should work, if anyone has any suggestion let me know. What I do now is, in case I don't have the tty available I reschedule the work, I have tried it and it works with no problem, I even tried removing the device, and didn't find anything strange. Signed-off-by: Naranjo Manuel <naranjo.manuel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01OHCI: change priority level of resume log messageAlan Stern
All the other root-hub suspend or resume log messages, in ohci-hcd or any of the other host controller drivers, use the debug priority level. This patch (as815) makes the one single exception behave like all the rest. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: visor kill urb cleanupMariusz Kozlowski
- usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: usb-serial free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: navman kill urb cleanupMariusz Kozlowski
- usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: mct_u232 free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: kobil_sct kill urb cleanupMariusz Kozlowski
- usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: keyspan free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: io_edgeport kill urb cleanupMariusz Kozlowski
- usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: catc free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: ftdi_sio kill urb cleanupMariusz Kozlowski
- usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: phidgetmotorcontrol free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: phidgetkit free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: legousbtower free kill urb cleanupMariusz Kozlowski
Hello, - usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: auerswald free kill urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: usbkbd free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: hid-core free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: ati_remote2 free urb cleanupMariusz Kozlowski
Hello, - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: ati_remote free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb-serial: ti_usb, TI ez430 development tool IDOleg Verych
usb-serial: ti_usb, TI ez430 development tool ID Signed-off-by: Oleg Verych <olecom@flower.upol.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>