summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)Author
2013-11-26usb: musb: core: call musb_platform_set_mode() during probeFelipe Balbi
This will tell glue layer which mode we want port to be in. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-26usb: musb: dsps: implement ->set_mode()Felipe Balbi
this will let us support broken designs such as AM335x EVM SK where ID pin isn't routed anywhere on a host port. With this we can toggle internal IDDIG signal and make sure MUSB goes into host mode as necessary. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-26usb: gadget: r8a66597-udc: convert to clk_prepare/unprepareLaurent Pinchart
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and clk_disable_unprepare() to get ready for the migration to the common clock framework. Cc: Felipe Balbi <balbi@ti.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: phy: twl6030-usb: signedness bug in twl6030_readb()Dan Carpenter
"ret" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: dwc3: power off usb phy in error pathKishon Vijay Abraham I
usb phy was power'ed on but was never power'ed off in the error path. Fix it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: dwc3: invoke phy_resume after phy_initKishon Vijay Abraham I
usb_phy_set_suspend(phy, 0) is called before usb_phy_init. Fix it. Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: f_mass_storage: call try_to_freeze only when its safeGeorge Cherian
Call try_to_freeze() in sleep_thread() only when it's safe to sleep. do_read() and do_write() calls sleep_thread with lock held. Make sure these won't call try_to_freeze() by passing can_freeze flag to sleep_thread. Calling try_to_freeze() with a lock hold was done since day one in f_mass_storage but since commit 0f9548ca1 ("lockdep: check that no locks held at freeze time") lockdep complains about it. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt staticFelipe Balbi
that symbol is only used inside this function driver, we should mark it static. Fixes sparse's: drivers/usb/gadget/tcm_usb_gadget.c:373:6: warning: symbol \ 'bot_cleanup_old_alt' was not declared. Should it \ be static? Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: ffs: fix sparse warningFelipe Balbi
use NULL instead of 0 as pointer. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: zero: module parameters can be staticFengguang Wu
g_zero's module parameters can, and should, be static. This fixes sparse warnings. Cc: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: storage: fix sparse warningFelipe Balbi
fsg_common_set_inquiry_string() expects pointers as second and third argument. Let's fix that by passing NULL instead of plain 0 just so we silence sparse's: drivers/usb/gadget/f_mass_storage.c:3114:60: warning: \ Using plain integer as NULL pointer drivers/usb/gadget/f_mass_storage.c:3114:63: warning: \ Using plain integer as NULL pointer Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: phy: phy-rcar-gen2-usb: fix phy initializationValentine Barshak
Add missing USB UGCTRL2 register offset. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: phy: phy-generic: fix return value check in usb_nop_xceiv_register()Wei Yongjun
In case of error, the function platform_device_register_simple() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: dwc3: fix implementation of endpoint wedgeAlan Stern
The dwc3 UDC driver doesn't implement endpoint wedging correctly. When an endpoint is wedged, the gadget driver should be allowed to clear the wedge by calling usb_ep_clear_halt(). Only the host is prevented from resetting the endpoint. This patch fixes the implementation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Pratyush Anand <pratyush.anand@st.com> Cc: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: mass storage: fix return of delayed statusPratyush Anand
Mass storage gadget returns DELAYED_STATUS in stead of USB_GADGET_DELAYED_STATUS while handling bulk reset request. Since peripheral driver uses USB_GADGET_DELAYED_STATUS for delayed status handling, therefore replace DELAYED_STATUS by USB_GADGET_DELAYED_STATUS in mass storage driver. Since, DELAYED_STATUS and hence EP0_BUFSIZE will no longer be used now, so remove them. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Cc: Paul Zimmerman <Paul.Zimmerman@synopsys.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: f_mass_storage: fix mass storage dependencyAndrzej Pietrasiewicz
Legacy gadgets supporting mass storage (g_mass_storage, g_acm_ms, g_multi) all depend on BLOCK. Make the standalone compilation of f_mass_storage (without any legacy gadget) dependent no BLOCK, too. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: phy: phy-mxs-usb: set the correct platform drvdataJisheng Zhang
We need to set mxs_phy rather as the platform drvdata so that we can get the correct mxs_phy in mxs_phy_remove(). Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: musb: only cancel work if it is initializedSebastian Andrzej Siewior
Since commit c5340bd14 ("usb: musb: cancel work on removal") the workqueue is cancelled but then if we bail out before the workqueue is setup we get this: |INFO: trying to register non-static key. |the code is fine but needs lockdep annotation. |turning off the locking correctness validator. |CPU: 0 PID: 708 Comm: modprobe Not tainted 3.12.0+ #435 |[<c00867bc>] (lock_acquire+0xf0/0x108) from [<c00529d0>] (flush_work+0x38/0x2ec) |[<c00529d0>] (flush_work+0x38/0x2ec) from [<c0052d24>] (__cancel_work_timer+0xa0/0x134) |[<c0052d24>] (__cancel_work_timer+0xa0/0x134) from [<bf0e4ae4>] (musb_free+0x40/0x60 [musb_hdrc]) |[<bf0e4ae4>] (musb_free+0x40/0x60 [musb_hdrc]) from [<bf0e5364>] (musb_probe+0x678/0xb78 [musb_hdrc]) |[<bf0e5364>] (musb_probe+0x678/0xb78 [musb_hdrc]) from [<c0294bf0>] (platform_drv_probe+0x1c/0x24) |[<c0294bf0>] (platform_drv_probe+0x1c/0x24) from [<c0293970>] (driver_probe_device+0x90/0x224) |[<c0293970>] (driver_probe_device+0x90/0x224) from [<c0291ef0>] (bus_for_each_drv+0x60/0x8c) |[<c0291ef0>] (bus_for_each_drv+0x60/0x8c) from [<c02938bc>] (device_attach+0x80/0xa4) |[<c02938bc>] (device_attach+0x80/0xa4) from [<c0292b24>] (bus_probe_device+0x88/0xac) |[<c0292b24>] (bus_probe_device+0x88/0xac) from [<c0291490>] (device_add+0x388/0x6c8) |[<c0291490>] (device_add+0x388/0x6c8) from [<c02952a0>] (platform_device_add+0x188/0x22c) |[<c02952a0>] (platform_device_add+0x188/0x22c) from [<bf11ea30>] (dsps_probe+0x294/0x394 [musb_dsps]) |[<bf11ea30>] (dsps_probe+0x294/0x394 [musb_dsps]) from [<c0294bf0>] (platform_drv_probe+0x1c/0x24) |platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral |musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517 This patch moves the init part to earlier part so it can be cleaned as part of the fail3 label because now it is surrounded by the fail4 label. Step two is to remove it from musb_free() and add it to the two cleanup paths (error path and device removal) separately. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: composite: reset delayed_status on reset_configMichael Grzeschik
The delayed_status value is used to keep track of status response packets on ep0. It needs to be reset or the set_config function would still delay the answer, if the usb device got unplugged while waiting for setup_continue to be called. Cc: stable@vger.kernel.org Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: musb: musb_cppi41: handle pre-mature TX complete interruptSebastian Andrzej Siewior
The TX-complete interrupt of the CPPI41 on AM335x fires too early. Adding a loop and counting how long it takes until the MUSB_TXCSR_TXPKTRDY bit is cleared I see FS: |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadc54002, len=1514 is_tx=1 |cppi41_dma_callback() 74 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadcd8802, len=1514 is_tx=1 |cppi41_dma_callback() 66 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadcd8002, len=1514 is_tx=1 |cppi41_dma_callback() 136 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=64, mode=0, dma_addr=0xadf55802, len=1514 is_tx=1 |cppi41_dma_callback() 136 loops avg: 110 - 150us HS: |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=512, mode=0, dma_addr=0xaca6f002, len=1514 is_tx=1 |cppi41_dma_callback() 0 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=512, mode=0, dma_addr=0xadd6f802, len=1514 is_tx=1 |cppi41_dma_callback() 2 loops |musb-hdrc musb-hdrc.0.auto: configure ep1/80 packet_sz=512, mode=0, dma_addr=0xadd6f002, len=1514 is_tx=1 |cppi41_dma_callback() 13 loops avg: 2us for the same test case. One loop means a udelay(1). The delay seems to depend on the packet size. On HS the bit is always cleared for small packet sizes while on FS it is never the case, it mostly around 110us. This testing has been performed with g_ether (musb as device) and using BULK transfers. INTR transfers are way more fun: during init the gadget sends a INT packet to the host and cppi41 says "transfer done" shortly after. The MUSB_TXCSR_TXPKTRDY bit is set even seconds later. The reason is that the host did not try to receive it, it does so after the interface (on host side) has been configured. Until this happens, that packet remains in musb's FIFO. To fix this, two things are done: - No DMA transfers for INT based endpoints. These transfer are usually very small and rare so it is likely better to skip the DMA engine and stuff the four bytes directly into the FIFO - on HS we poll up to 25us and hope that bit goes away. If not we setup a hrtimer to poll for it. The 140us delay is a rule of thumb. In FS the command | ping 10.10.10.10 -c1 -s65130 creates about 44 1514bytes transfers. About 19 of them need a second timer to complete. Reported-by: Bin Liu <b-liu@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: musb: musb_cppi41: factor most of cppi41_dma_callback() into ↵Sebastian Andrzej Siewior
cppi41_trans_done() This patch moves most of the logic in cppi41_dma_callback() into cppi41_trans_done() where it can be called from another function. Instead of computing "transferred" (the number of bytes transferred in the last transaction) in cppi41_trans_done() the member "cppi41_channel->prog_len" is now set to 0 if the transfer as a whole can be considered as done. If it is != 0 then the next iteration is assumed. This is a preparation for a workaround. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25USB: serial: fix write memory-allocation flagJohan Hovold
Fix regression introduced by commit 818f60365a29 ("USB: serial: add memory flags to usb_serial_generic_write_start"), which incorrectly used GFP_KERNEL in write(), which must not not sleep. Reported-by: Dave Jones <davej@fedoraproject.org> Tested-by: Dave Jones <davej@fedoraproject.org> Cc: Dave Jones <davej@fedoraproject.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-25USB: serial: fix race in generic writeJohan Hovold
Fix race in generic write implementation, which could lead to temporarily degraded throughput. The current generic write implementation introduced by commit 27c7acf22047 ("USB: serial: reimplement generic fifo-based writes") has always had this bug, although it's fairly hard to trigger and the consequences are not likely to be noticed. Specifically, a write() on one CPU while the completion handler is running on another could result in only one of the two write urbs being utilised to empty the remainder of the write fifo (unless there is a second write() that doesn't race during that time). Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-25usb: phy: generic: fix a compiler warningHeikki Krogerus
Just because it annoys me. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: phy-generic: fix nop xceiv probeAaro Koskinen
Commit bd27fa44e13830d2baa278d5702e766380659cb3 (usb: phy: generic: Don't use regulator framework for RESET line) introduced regression: All users of usb_nop_xceiv_register() will fail because there is no platform data and the default reset GPIO is 0 which is a valid GPIO. Fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: fix musb gadget to enable OTG mode conditionallyApelete Seketeli
The musb driver is usable in host, gadget or dual role mode depending on the kernel configuration. However, the musb gadget part of the driver is enabling OTG mode whether the driver is built for dual role or gadget only mode. This induces a bug for gadget only USB device controllers where the kernel tries to use Host Negotiation Protocol with such controllers, which causes a panic. This behaviour is now fixed by enabling OTG mode only when musb driver is built for dual role mode. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: fix pxa25x compilation problemsLinus Walleij
In commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" we removed the implicit inclusion of <mach/gpio.h> from <linux/gpio.h>. The pxa25x_udc was not using that, but it was relying on <linux/gpio.h> to implictly include <mach/gpio.h> which in turn implicitly included <mach/hardware.h>, which was needed for the driver to compile. Fix this up by explicitly including the necessary <mach/hardware.h> header. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: s3c-hsotg: fix disconnect handlingRobert Baldyga
This patch moves s3c_hsotg_disconnect function call from USBSusp interrupt handler to SET_ADDRESS request handler. It's because disconnected state can't be detected directly, because this hardware doesn't support Disconnected interrupt for device mode. For both Suspend and Disconnect events there is one interrupt USBSusp, but calling s3c_hsotg_disconnect from this interrupt handler causes config reset in composite layer, which is not undesirable for Suspended state. For this reason s3c_hsotg_disconnect is called from SET_ADDRESS request handler, which occurs always after disconnection, so we do disconnect immediately before we are connected again. It's probably only way we can do handle disconnection correctly. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: gadget: s3c-hsotg: fix spinlock lockingRobert Baldyga
This patch adds missing spinlock locking in s3c_hsotg_complete_setup function, and unlocking for gadget setup call. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: phy: generic: fix how we find out about our resourcesFelipe Balbi
instead of having each user of generic phy find out about its own resources and pass it to the core layer, have th core layer itself figure that out. It's as simple as moving a piece of code around. This fixes a big regression caused during the merge window where am335x-based platforms wouldn't be able to probe their PHY driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-25usb: phy: remove dead codeMichal Nazarewicz
Commit [4d175f34: usb: phy: nop: Defer clock prepare until PHY init] removed a goto reaching behind a “return ret” at the end of the function thus removing the only possible way that statement could be reached, and so rendering it a dead code. This commit cleans it up by removing said dead code. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-22Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Things have been quiet this round with mostly bugfixes, percpu conversions, and other minor iscsi-target conformance testing changes. The highlights include: - Add demo_mode_discovery attribute for iscsi-target (Thomas) - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation - Add send completion interrupt coalescing for ib_isert - Convert target-core to use percpu-refcounting for se_lun - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn - tcm_loop updates (Hannes) - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes) v3.14 is currently shaping to be a busy development cycle in target land, with initial support for T10 Referrals and T10 DIF currently on the roadmap" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits) iscsi-target: chap auth shouldn't match username with trailing garbage iscsi-target: fix extract_param to handle buffer length corner case iscsi-target: Expose default_erl as TPG attribute target_core_configfs: split up ALUA supported states target_core_alua: Make supported states configurable target_core_alua: Store supported ALUA states target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED target_core_alua: spellcheck target core: rename (ex,im)plict -> (ex,im)plicit percpu-refcount: Add percpu-refcount.o to obj-y iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN iscsi-target: Convert iscsi_session statistics to atomic_long_t target: Convert se_device statistics to atomic_long_t target: Fix delayed Task Aborted Status (TAS) handling bug iscsi-target: Reject unsupported multi PDU text command sequence ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn target: Core does not need blkdev.h target: Pass through I/O topology for block backstores iser-target: Avoid using FRMR for single dma entry requests ...
2013-11-20Merge tag 'pm+acpi-2-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: - ACPI-based device hotplug fixes for issues introduced recently and a fix for an older error code path bug in the ACPI PCI host bridge driver - Fix for recently broken OMAP cpufreq build from Viresh Kumar - Fix for a recent hibernation regression related to s2disk - Fix for a locking-related regression in the ACPI EC driver from Puneet Kumar - System suspend error code path fix related to runtime PM and runtime PM documentation update from Ulf Hansson - cpufreq's conservative governor fix from Xiaoguang Chen - New processor IDs for intel_idle and turbostat and removal of an obsolete Kconfig option from Len Brown - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg - Removal of several ACPI video DMI blacklist entries that are not necessary any more from Aaron Lu - Rework of the ACPI companion representation in struct device and code cleanup related to that change from Rafael J Wysocki, Lan Tianyu and Jarkko Nikula - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from Jarkko Nikula * tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed() ACPI / PCI root: Clear driver_data before failing enumeration ACPI / hotplug: Fix PCI host bridge hot removal ACPI / hotplug: Fix acpi_bus_get_device() return value check cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs() ACPI / video: clean up DMI table for initial black screen problem ACPI / EC: Ensure lock is acquired before accessing ec struct members PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps() ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac spi: Use stable dev_name for ACPI enumerated SPI slaves i2c: Use stable dev_name for ACPI enumerated I2C slaves ACPI: Provide acpi_dev_name accessor for struct acpi_device device name ACPI / bind: Use (put|get)_device() on ACPI device objects too ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node cpufreq: OMAP: Fix compilation error 'r & ret undeclared' PM / Runtime: Fix error path for prepare PM / Runtime: Update documentation around probe|remove|suspend cpufreq: conservative: set requested_freq to policy max when it is over policy max ...
2013-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-14ACPI: Eliminate the DEVICE_ACPI_HANDLE() macroRafael J. Wysocki
Since DEVICE_ACPI_HANDLE() is now literally identical to ACPI_HANDLE(), replace it with the latter everywhere and drop its definition from include/acpi.h. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-14Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-11-11Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Most of this branch consists of updates, additions and general churn of the device tree source files in the kernel (arch/arm/boot/dts). Besides that, there are a few things to point out: - Lots of platform conversion on OMAP2+, with removal of old board files for various platforms. - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well - Some updates to pinctrl and other subsystems. Most of these are for DT-enablement of the various platforms and acks have been collected" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits) ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx) ARM: dts: bcm281xx: Add card detect GPIO ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt) ARM: bcm281xx: Add device node for the GPIO controller ARM: mvebu: Add Netgear ReadyNAS 104 board ARM: tegra: fix Tegra114 IOMMU register address ARM: kirkwood: add support for OpenBlocks A7 platform ARM: dts: omap4-panda: add DPI pinmuxing ARM: dts: AM33xx: Add RNG node ARM: dts: AM33XX: Add hwspinlock node ARM: dts: OMAP5: Add hwspinlock node ARM: dts: OMAP4: Add hwspinlock node ARM: dts: use 'status' property for PCIe nodes ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts ARM: mvebu: Add the core-divider clock to Armada 370/XP ...
2013-11-11Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
2013-11-07Merge remote-tracking branch 'grant/devicetree/next' into for-nextRob Herring
2013-11-07Merge tag 'usb-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver update from Greg KH: "Here's the big USB driver update for 3.13-rc1. It includes the usual xhci changes, EHCI updates to get the scheduling of USB transactions working better, and a raft of gadget and musb updates as well. All of this has been in linux-next for a while with no reported issues" * tag 'usb-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (305 commits) USB: Maintainers change for usb serial drivers usb: usbtest: support container id descriptor test usb: usbtest: support superspeed device capbility descriptor test usb: usbtest: support usb2 extension descriptor test usb: chipidea: only get vbus regulator for non-peripheral mode USB: ehci-atmel: add usb_clk for transition to CCF usb: cdc-wdm: ignore speed change notifications USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macros printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages usb: usbtest: support bos descriptor test for usb 3.0 USB: phy: samsung: Support multiple PHYs of same type usb: wusbcore: change WA_SEGS_MAX to a legal value usb: wusbcore: add a quirk for Alereon HWA device isoc behavior usb: wusbcore: combine multiple isoc frames in a single transfer request. usb: wusbcore: set the RPIPE wMaxPacketSize value correctly usb: chipidea: host: more enhancement when ci->hcd is NULL usb: ohci: remove ep93xx bus glue platform driver usb: usbtest: fix checkpatch warning as sizeof code style UWB: clean up attribute use by using ATTRIBUTE_GROUPS() ...
2013-11-01USB: serial: ftdi_sio: add id for Z3X Box deviceАлексей Крамаренко
Custom VID/PID for Z3X Box device, popular tool for cellphone flashing. Signed-off-by: Alexey E. Kramarenko <alexeyk13@yandex.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "USB: pl2303: restrict the divisor based baud rate encoding method to ↵Greg Kroah-Hartman
the "HX" chip type" This reverts commit b8bdad608213caffa081a97d2e937e5fe08c4046. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method"Greg Kroah-Hartman
This reverts commit 57ce61aad748ceaa08c859da04043ad7dae7c15e. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: do not round to the next nearest standard baud rate for ↵Greg Kroah-Hartman
the divisor based baud rate encoding method" This reverts commit 75417d9f99f89ab241de69d7db15af5842b488c4. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates"Greg Kroah-Hartman
This reverts commit b9208c721ce736125fe58d398319513a27850fd8. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: move the two baud rate encoding methods to separate ↵Greg Kroah-Hartman
functions" This reverts commit e917ba01d69ad705a4cd6a6c77538f55d84f5907. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: increase the allowed baud rate range for the divisor ↵Greg Kroah-Hartman
based encoding method" This reverts commit b5c16c6a031c52cc4b7dda6c3de46462fbc92eab. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>