summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)Author
2014-03-07Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather."Mathias Nyman
This reverts commit 247bf557273dd775505fb9240d2d152f4f20d304. This commit, together with commit 3804fad45411b48233b48003e33a78f290d227c8 "USBNET: ax88179_178a: enable tso if usb host supports sg dma" were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules required, but for now this patch needs to be reverted to get USB 3.0 mass storage devices working at the level they used to. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requestsJulius Werner
The DELAY_INIT quirk only reduces the frequency of enumeration failures with the Logitech HD Pro C920 and C930e webcams, but does not quite eliminate them. We have found that adding a delay of 100ms between the first and second Get Configuration request makes the device enumerate perfectly reliable even after several weeks of extensive testing. The reasons for that are anyone's guess, but since the DELAY_INIT quirk already delays enumeration by a whole second, wating for another 10th of that isn't really a big deal for the one other device that uses it, and it will resolve the problems with these webcams. Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07usb: Add device quirk for Logitech HD Pro Webcams C920 and C930eJulius Werner
We've encountered a rare issue when enumerating two Logitech webcams after a reboot that doesn't power cycle the USB ports. They are spewing random data (possibly some leftover UVC buffers) on the second (full-sized) Get Configuration request of the enumeration phase. Since the data is random this can potentially cause all kinds of odd behavior, and since it occasionally happens multiple times (after the kernel issues another reset due to the garbled configuration descriptor), it is not always recoverable. Set the USB_DELAY_INIT quirk that seems to work around the issue. Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-26usb: ehci: fix deadlock when threadirqs option is usedStanislaw Gruszka
ehci_irq() and ehci_hrtimer_func() can deadlock on ehci->lock when threadirqs option is used. To prevent the deadlock use spin_lock_irqsave() in ehci_irq(). This change can be reverted when hrtimer callbacks become threaded. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-26USB: ftdi_sio: add Cressi Leonardo PIDJoerg Dorchain
Hello, the following patch adds an entry for the PID of a Cressi Leonardo diving computer interface to kernel 3.13.0. It is detected as FT232RL. Works with subsurface. Signed-off-by: Joerg Dorchain <joerg@dorchain.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-21usb: chipidea: need to mask when writting endptflush and endptprimeMatthieu CASTET
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear by hardware. There is a bit for each endpoint. When we are setting a bit for an endpoint we should make sure we do not touch other endpoint bit. There is a race condition if the hardware clear the bit between the read and the write in hw_write. Cc: stable <stable@vger.kernel.org> # 3.11+ Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-20Merge tag 'fixes-for-v3.14-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.14-rc4 Here are 10 fixes for our current -rc cycle. It's likely the last round of fixes for this merge window. All patches have soaked for a long time and have all been tested in real HW. The most interesting fixes are a fix for enumeration of superspeed hubs when MUSB is acting as host, and a remote-wakeup fix also on MUSB. Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-02-20usb: musb: correct use of schedule_delayed_work()Daniel Mack
schedule_delayed_work() takes the delay in jiffies, not msecs. This bug slipped in with the recent reset logic cleanup (8ed1fb790ea: "usb: musb: finish suspend/reset work independently from musb_hub_control()"). Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-20usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEPJosh Cartwright
Both the PM_RUNTIME and PM_SLEEP callbacks call into the common msm_otg_{suspend,resume} routines, however these routines are only being built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also depends on msm_hsusb_config_vddcx(), which is only built when CONFIG_PM_SLEEP. Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the preprocessor conditional, and moving msm_hsusb_config_vddcx(). While we're here, eliminate the CONFIG_PM conditional for setting up the dev_pm_ops. This address the following errors Russell King has hit doing randconfig builds: drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend': drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend' drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume': drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume' Cc: Ivan T. Ivanov <iivanov@mm-sol.com> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-20usb: gadget: fix NULL pointer dereferenceAndrzej Pietrasiewicz
Fix possible NULL pointer dereference introduced in commit 219580e (usb: f_fs: check quirk to pad epout buf size when not aligned to maxpacketsize) In cases we do wait with: wait_event_interruptible(epfile->wait, (ep = epfile->ep)); for endpoint to be enabled, functionfs_bind() has not been called yet and epfile->ffs->gadget is still NULL and the automatic variable 'gadget' has been initialized with NULL at the point of its definition. Later on it is used as a parameter to: usb_ep_align_maybe(gadget, ep->ep, len) which in turn dereferences it. This patch fixes it by moving the actual assignment to the local 'gadget' variable after the potential waiting has completed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-20usb: gadget: printer: using gadget_is_otg to check otg support at runtimePeter Chen
We need to use gadget_is_otg to check if the gadget is really otg support at runtime, other composite gadget drivers have already followed this method. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-18usb: musb: correct use of schedule_delayed_work()Daniel Mack
schedule_delayed_work() takes the delay in jiffies, not msecs. Fix the caller sites in musb. This bug caused regressions with the cleanups that went in for 3.14 (8ed1fb790ea: "usb: musb: finish suspend/reset work independently from musb_hub_control()"). Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18usb: musb: do not sleep in atomic contextDaniel Mack
musb_port_reset() is called from musb_hub_control() which in turn holds a spinlock, so musb_port_reset() is not allowed to call msleep(). With the asynchronous work helpers in place, this is fortunately easy to fix by rescheduling the reset deassertion function to after the time when the wait period is finished. Note, however, that the MUSB_POWER_RESUME bit is only set on AM33xx processors under rare conditions such as when to another driver reporting an error during suspend. Hence, this didn't hit me yet in normal operation. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8Aleksander Morgado
This interface is to be handled by the qmi_wwan driver. CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> CC: David McCullough <david.mccullough@accelecon.com> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18USB: EHCI: add delay during suspend to prevent erroneous wakeupsAlan Stern
High-speed USB connections revert back to full-speed signalling when the device goes into suspend. This takes several milliseconds, and during that time it's not possible to tell reliably whether the device has been disconnected. On some platforms, the Wake-On-Disconnect circuitry gets confused during this intermediate state. It generates a false wakeup signal, which can prevent the controller from going to sleep. To avoid this problem, this patch adds a 5-ms delay to the ehci_bus_suspend() routine if any ports have to switch over to full-speed signalling. (Actually, the delay was already present for devices using a particular kind of PHY power management; the patch merely causes the delay to be used more widely.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Peter Chen <Peter.Chen@freescale.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18usb: gadget: bcm63xx_udc: fix build failure on DMA channel codeFlorian Fainelli
Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet") changed the ENETDMA[CS] macros such that they are no longer macros, but actual register offset definitions. The bcm63xx_udc driver was not updated, and as a result, causes the following build error to pop up: CC drivers/usb/gadget/u_ether.o drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write': drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not a function drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel': drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not a function drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not a function Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to take an extra channel argument, and use the channel width (ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence doing again what the macro implicitely did for us. Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: <stable@vger.kernel.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-18usb: musb: do not sleep in atomic contextDaniel Mack
musb_port_reset() is called from musb_hub_control() which in turn holds a spinlock, so musb_port_reset() is not allowed to call msleep(). With the asynchronous work helpers in place, this is fortunately easy to fix by rescheduling the reset deassertion function to after the time when the wait period is finished. Note, however, that the MUSB_POWER_RESUME bit is only set on AM33xx processors under rare conditions such as when to another driver reporting an error during suspend. Hence, this didn't hit me yet in normal operation. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-18usb: gadget: s3c2410_udc: Fix build errorSachin Kamat
Pass value instead of address as expected by 'usb_ep_set_maxpacket_limit'. Fixes the following compilation error introduced by commit e117e742d310 ("usb: gadget: add "maxpacket_limit" field to struct usb_ep"): drivers/usb/gadget/s3c2410_udc.c: In function ‘s3c2410_udc_reinit’: drivers/usb/gadget/s3c2410_udc.c:1632:3: error: cannot take address of bit-field ‘maxpacket’ usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket); Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-18usb: musb: core: Fix remote-wakeup resumeRoger Quadros
During resume don't touch SUSPENDM/RESUME bits of POWER register while restoring controller context. These bits might be changed by the controller during resume operation and so will be different than what they were during suspend. e.g. SUSPENDM bit is set by software during USB global suspend but automatically cleared by the controller during remote wakeup or during resume. Setting this bit back while restoring context causes undesired behaviour. i.e. Babble interrupt is generated and USB is broken. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-18usb: musb: host: Fix SuperSpeed hub enumerationAjay Kumar Gupta
Disables PING on status phase of control transfer. PING token is not mandatory in status phase of control transfer and so some high speed USB devices don't support it. If such devices are connected to MUSB then they would not respond to PING token causing delayed or failed enumeration. [Roger Q] Fixes enumeration issues with some Super-Speed USB hubs e.g. Dlink DUB-1340 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-18usb: musb: fix obex in g_nokia.ko causing kernel panicFelipe Balbi
phy_power_off() can, depending on the PHY being used, start I2C transactions which shouldn't happen in atomic context. Current call to phy_power_off() inside omap2430_runtime callbacks causes the following dump, as a fix, just don't power off the PHY in runtime. [ 18.606414] [<c037eac0>] (__schedule+0x5c/0x50c) from [<c037d3bc>] (schedule_timeout+0x1f4/0x25c) [ 18.623809] [<c037d3bc>] (schedule_timeout+0x1f4/0x25c) from [<c037f12c>] (wait_for_common+0xc8/0x1ac) [ 18.649291] [<c037f12c>] (wait_for_common+0xc8/0x1ac) from [<c028c1c0>] (omap_i2c_xfer+0x338/0x488) [ 18.674499] [<c028c1c0>] (omap_i2c_xfer+0x338/0x488) from [<c0288144>] (__i2c_transfer+0x40/0x74) [ 18.692047] [<c0288144>] (__i2c_transfer+0x40/0x74) from [<c0288a2c>] (i2c_transfer+0x6c/0x90) [ 18.709320] [<c0288a2c>] (i2c_transfer+0x6c/0x90) from [<c02351c8>] (regmap_i2c_read+0x48/0x68) [ 18.726715] [<c02351c8>] (regmap_i2c_read+0x48/0x68) from [<c023161c>] (_regmap_raw_read+0x128/0x220) [ 18.752685] [<c023161c>] (_regmap_raw_read+0x128/0x220) from [<c02317b4>] (regmap_raw_read+0xa0/0x130) [ 18.779052] [<c02317b4>] (regmap_raw_read+0xa0/0x130) from [<c023193c>] (regmap_bulk_read+0xf8/0x16c) [ 18.805694] [<c023193c>] (regmap_bulk_read+0xf8/0x16c) from [<c0238ea8>] (twl_i2c_read+0xa4/0xe0) [ 18.823730] [<c0238ea8>] (twl_i2c_read+0xa4/0xe0) from [<c0274d34>] (__twl4030_phy_power.isra.12+0x1c/0x58) [ 18.850921] [<c0274d34>] (__twl4030_phy_power.isra.12+0x1c/0x58) from [<c0274df0>] (twl4030_phy_power.part.14+0x80/0xc8) [ 18.879699] [<c0274df0>] (twl4030_phy_power.part.14+0x80/0xc8) from [<c0274f9c>] (twl4030_set_suspend+0x54/0x1e8) [ 18.908325] [<c0274f9c>] (twl4030_set_suspend+0x54/0x1e8) from [<c027c8c4>] (omap2430_runtime_resume+0x5c/0x64) [ 18.937042] [<c027c8c4>] (omap2430_runtime_resume+0x5c/0x64) from [<c0225dd0>] (pm_generic_runtime_resume+0x2c/0x38) [ 18.966461] [<c0225dd0>] (pm_generic_runtime_resume+0x2c/0x38) from [<c0229fe0>] (__rpm_callback+0x54/0x80) [ 18.995117] [<c0229fe0>] (__rpm_callback+0x54/0x80) from [<c022a04c>] (rpm_callback+0x40/0x74) [ 19.013610] [<c022a04c>] (rpm_callback+0x40/0x74) from [<c022b3c8>] (rpm_resume+0x448/0x63c) [ 19.031921] [<c022b3c8>] (rpm_resume+0x448/0x63c) from [<c022b2e4>] (rpm_resume+0x364/0x63c) [ 19.050140] [<c022b2e4>] (rpm_resume+0x364/0x63c) from [<c022b874>] (__pm_runtime_resume+0x48/0x74) [ 19.077728] [<c022b874>] (__pm_runtime_resume+0x48/0x74) from [<c027b4fc>] (musb_gadget_pullup+0x1c/0xb4) [ 19.105895] [<c027b4fc>] (musb_gadget_pullup+0x1c/0xb4) from [<bf025c14>] (usb_function_deactivate+0x54/0xa4 [libcomposite]) [ 19.135955] [<bf025c14>] (usb_function_deactivate+0x54/0xa4 [libcomposite]) from [<bf05b3b8>] (obex_bind+0x124/0x1d8 [usb_f_obex]) [ 19.166870] [<bf05b3b8>] (obex_bind+0x124/0x1d8 [usb_f_obex]) from [<bf025794>] (usb_add_function+0x58/0xf4 [libcomposite]) [ 19.197143] [<bf025794>] (usb_add_function+0x58/0xf4 [libcomposite]) from [<bf037420>] (nokia_bind_config+0x204/0x250 [g_nokia]) [ 19.227905] [<bf037420>] (nokia_bind_config+0x204/0x250 [g_nokia]) from [<bf0263fc>] (usb_add_config+0x28/0xc0 [libcomposite]) [ 19.258483] [<bf0263fc>] (usb_add_config+0x28/0xc0 [libcomposite]) from [<bf03709c>] (nokia_bind+0x9c/0x21c [g_nokia]) [ 19.288421] [<bf03709c>] (nokia_bind+0x9c/0x21c [g_nokia]) from [<bf0275bc>] (composite_bind+0x74/0x180 [libcomposite]) [ 19.318420] [<bf0275bc>] (composite_bind+0x74/0x180 [libcomposite]) from [<c027d658>] (udc_bind_to_driver+0x2c/0xc4) [ 19.348114] [<c027d658>] (udc_bind_to_driver+0x2c/0xc4) from [<c027d764>] (usb_gadget_probe_driver+0x74/0x94) [ 19.377166] [<c027d764>] (usb_gadget_probe_driver+0x74/0x94) from [<c00086f8>] (do_one_initcall+0x94/0x138) [ 19.406005] [<c00086f8>] (do_one_initcall+0x94/0x138) from [<c007a460>] (load_module+0x113c/0x13c4) [ 19.434051] [<c007a460>] (load_module+0x113c/0x13c4) from [<c007a7b4>] (SyS_init_module+0xcc/0xec) [ 19.462127] [<c007a7b4>] (SyS_init_module+0xcc/0xec) from [<c000dd40>] (ret_fast_syscall+0x0/0x30) [ 19.490753] Code: 0a00002e e1a00004 eb001438 e598300c (e5d3202c) [ 19.506805] ---[ end trace 060b62ec0d68a78b ]--- [ 19.523132] Kernel panic - not syncing: Fatal exception in interrupt dump is from 3.12-rc5 kernel Reported-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-11usb: option: blacklist ZTE MF667 net interfaceRaymond Wanyoike
Interface #5 of 19d2:1270 is a net interface which has been submitted to the qmi_wwan driver so consequently remove it from the option driver. Signed-off-by: Raymond Wanyoike <raymond.wanyoike@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07Revert "usb: xhci: Link TRB must not occur within a USB payload burst"Sarah Sharp
This reverts commit 35773dac5f862cb1c82ea151eba3e2f6de51ec3e. It's a hack that caused regressions in the usb-storage and userspace USB drivers that use usbfs and libusb. Commit 70cabb7d992f "xhci 1.0: Limit arbitrarily-aligned scatter gather." should fix the issues seen with the ax88179_178a driver on xHCI 1.0 hosts, without causing regressions. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org # 3.12
2014-02-07Revert "xhci: Avoid infinite loop when sg urb requires too many trbs"Sarah Sharp
This reverts commit d6c9ea9069af684358efedcaf2f2f687f51c58ee. We are ripping out commit 35773dac5f862cb1c82ea151eba3e2f6de51ec3e "usb: xhci: Link TRB must not occur within a USB payload burst" because it's a hack that caused regressions in the usb-storage and userspace USB drivers that use usbfs and libusb. This commit attempted to fix the issues with that patch. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org # 3.12
2014-02-07Revert "xhci: Set scatter-gather limit to avoid failed block writes."Sarah Sharp
This reverts commit f2d9b991c549f159dc9ae81f77d8206c790cbfee. We are ripping out commit 35773dac5f862cb1c82ea151eba3e2f6de51ec3e "usb: xhci: Link TRB must not occur within a USB payload burst" because it's a hack that caused regressions in the usb-storage and userspace USB drivers that use usbfs and libusb. This commit attempted to fix the issues with that patch. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org #3.12
2014-02-07xhci 1.0: Limit arbitrarily-aligned scatter gather.Sarah Sharp
xHCI 1.0 hosts have a set of requirements on how to align transfer buffers on the endpoint rings called "TD fragment" rules. When the ax88179_178a driver added support for scatter gather in 3.12, with commit 804fad45411b48233b48003e33a78f290d227c8 "USBNET: ax88179_178a: enable tso if usb host supports sg dma", it broke the device under xHCI 1.0 hosts. Under certain network loads, the device would see an unexpected short packet from the host, which would cause the device to stop sending ethernet packets, even through USB packets would still be sent. Commit 35773dac5f86 "usb: xhci: Link TRB must not occur within a USB payload burst" attempted to fix this. It was a quick hack to partially implement the TD fragment rules. However, it caused regressions in the usb-storage layer and userspace USB drivers using libusb. The patches to attempt to fix this are too far reaching into the USB core, and we really need to implement the TD fragment rules correctly in the xHCI driver, instead of continuing to wallpaper over the issues. Disable arbitrarily-aligned scatter-gather in the xHCI driver for 1.0 hosts. Only the ax88179_178a driver checks the no_sg_constraint flag, so don't set it for 1.0 hosts. This should not impact usb-storage or usbfs behavior, since they pass down max packet sized aligned sg-list entries (512 for USB 2.0 and 1024 for USB 3.0). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Mark Lord <mlord@pobox.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Bjørn Mork <bjorn@mork.no> Cc: Freddy Xin <freddy@asix.com.tw> Cc: Ming Lei <ming.lei@canonical.com> Cc: stable@vger.kernel.org # 3.12
2014-02-05usb: core: Fix potential memory leak adding dyn USBdevice IDsChristian Engelmayer
Fix a memory leak in the usb_store_new_id() error paths. When bailing out due to sanity checks, the function left the already allocated usb_dynid struct in place. This regression was introduced by the following commits: c63fe8f6 (usb: core: add sanity checks when using bInterfaceClass with new_id) 1b9fb31f (usb: core: check for valid id_table when using the RefId feature) 52a6966c (usb: core: bail out if user gives an unknown RefId when using new_id) Detected by Coverity: CID 1162604. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-05USB: ftdi_sio: add Tagsys RFID Reader IDsUlrich Hahn
Adding two more IDs to the ftdi_sio usb serial driver. It now connects Tagsys RFID readers. There might be more IDs out there for other Tagsys models. Signed-off-by: Ulrich Hahn <uhahn@eanco.de> Cc: Johan Hovold <johan@hovold.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-05usb: qcserial: add Netgear Aircard 340UBjørn Mork
This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb-storage: enable multi-LUN scanning when neededAlan Stern
People sometimes create their own custom-configured kernels and forget to enable CONFIG_SCSI_MULTI_LUN. This causes problems when they plug in a USB storage device (such as a card reader) with more than one LUN. Fortunately, we can tell fairly easily when a storage device claims to have more than one LUN. When that happens, this patch asks the SCSI layer to probe all the LUNs automatically, regardless of the config setting. The patch also updates the Kconfig help text for usb-storage, explaining that CONFIG_SCSI_MULTI_LUN may be necessary. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Thomas Raschbacher <lordvan@lordvan.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> CC: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04USB: simple: add Dynastream ANT USB-m Stick device supportKristóf Ralovich
Add support for ANT USB-m Stick from Dynastream Innovations, by listing USB pid [34366.944805] usb 6-1: New USB device found, idVendor=0fcf, idProduct=1009 [34366.944817] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [34366.944824] usb 6-1: Product: ANT USB-m Stick [34366.944831] usb 6-1: Manufacturer: Dynastream Innovations Device reported (https://code.google.com/p/antpm/issues/detail?id=5) to work through: $ modprobe usbserial vendor=0x0fcf product=0x1009 Signed-off-by: Kristóf Ralovich <kristof.ralovich@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb-storage: add unusual-devs entry for BlackBerry 9000Alan Stern
This patch adds an unusual-devs entry for the BlackBerry 9000. This fixes Bugzilla #22442. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> Tested-by: Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb-storage: restrict bcdDevice range for Super Top in Cypress ATACBAlan Stern
The Cypress ATACB unusual-devs entry for the Super Top SATA bridge causes problems. Although it was originally reported only for bcdDevice = 0x160, its range was much larger. This resulted in a bug report for bcdDevice 0x220, so the range was capped at 0x219. Now Milan reports errors with bcdDevice 0x150. Therefore this patch restricts the range to just 0x160. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Milan Svoboda <milan.svoboda@centrum.cz> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb: phy: move some error messages to debugJosh Boyer
the PHY layer is supposed to be optional, considering some PHY have no control bus for SW to poke around. After commit 1ae5799 (usb: hcd: Initialize USB phy if needed) any HCD which didn't provide a PHY driver would emit annoying error messages. In this patch we're decreasing those messages to debugging only and we also add a PHY prefix or use dev_dbg so we know where they're coming from. Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb: ftdi_sio: add Mindstorms EV3 console adapterBjørn Mork
Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb: dwc2: fix memory corruption in dwc2 driverPaul Zimmerman
The move from the staging tree to the main tree exposed a longstanding memory corruption bug in the dwc2 driver. The reordering of the driver initialization caused the dwc2 driver to corrupt the initialization data of the sdhci driver on the Raspberry Pi platform, which made the bug show up. The error is in calling to_usb_device(hsotg->dev), since ->dev is not a member of struct usb_device. The easiest fix is to just remove the offending code, since it is not really needed. Thanks to Stephen Warren for tracking down the cause of this. Reported-by: Andre Heider <a.heider@gmail.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb: dwc2: fix role switch breakagePaul Zimmerman
Commit beb7e592bc "staging: dwc2: add check on dwc2_core_reset return" broke the B -> A role switching on OTG-enabled platforms. This commit fixes it. Reported-by: Dinh Nguyen <dinguyen@altera.com> Tested-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb: dwc2: bail out early when booting with "nousb"Andre Heider
Add usb_disabled() check to prevent kernel oops when booting with "nousb" in the cmdline: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at bus_add_device+0xe0/0x18c LR is at device_add_groups+0x1c/0x20 ... [<c02191c0>] (bus_add_device) from [<c0217130>] (device_add+0x41c/0x538) [<c0217130>] (device_add) from [<c023b1d4>] (usb_new_device+0x270/0x35c) [<c023b1d4>] (usb_new_device) from [<c0241174>] (usb_add_hcd+0x4fc/0x760) [<c0241174>] (usb_add_hcd) from [<c0254ce0>] (dwc2_hcd_init+0x434/0x510) [<c0254ce0>] (dwc2_hcd_init) from [<c02594f4>] (dwc2_driver_probe+0x130/0x170) [<c02594f4>] (dwc2_driver_probe) from [<c021bbd0>] (platform_drv_probe+0x28/0x58) Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04Merge tag 'for-usb-linus-2014-02-04' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus Sarah writes: xhci: Fix some regressions introduced in 3.14. Hi Greg, Here's four patches for 3.14. One of them adds an xHCI host quirk, and the other three of them fix regressions introduced in 3.14. One regression causes USB 3.0 Link PM to be enabled on all xHCI hosts (even those that may not support it), which causes some USB 3.0 devices to not enumerate. A second regression causes some xHCI hosts that don't support 64-bit addressing to stop responding to commands and die. Note, these patches don't fix the recent usbfs regression that was caused by commit 35773dac5f862cb1c82ea151eba3e2f6de51ec3e "usb: xhci: Link TRB must not occur within a USB payload burst". I'm waiting for those patches to be tested. Please pull usb-linus into usb-next, as I have feature patches that rely on 140e3026a57a Revert "usbcore: set lpm_capable field for LPM capable root hubs" Sarah Sharp
2014-01-30Revert "xhci: replace xhci_read_64() with readq()"Sarah Sharp
This reverts commit e8b373326d8efcaf9ec1da8b618556c89bd5ffc4. Many xHCI host controllers can only handle 32-bit addresses, and writing 64-bits at a time causes them to fail. Reading 64-bits at a time may also cause them to return 0xffffffff, so revert this commit as well. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-01-29Revert "xhci: replace xhci_write_64() with writeq()"Sarah Sharp
This reverts commit 7dd09a1af2c7150269350aaa567a11b06e831003. Many xHCI host controllers can only handle 32-bit addresses, and writing 64-bits at a time causes them to fail. Rafał reports that USB devices simply do not enumerate, and reverting this patch helps. Branimir reports that his host controller doesn't respond to an Enable Slot command and dies: [ 75.576160] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 88.991634] xhci_hcd 0000:03:00.0: Stopped the command ring failed, maybe the host is dead [ 88.991748] xhci_hcd 0000:03:00.0: Abort command ring failed [ 88.991845] xhci_hcd 0000:03:00.0: HC died; cleaning up [ 93.985489] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 93.985494] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead. [ 98.982586] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 98.982591] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead. [ 103.979696] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 103.979702] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Reported-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Branimir Maksimovic <branimir.maksimovic@gmail.com> Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
2014-01-29Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt
<< Switch mpc512x to the common clock framework and adapt mpc512x drivers to use the new clock driver. Old PPC_CLOCK code is removed entirely since there are no users any more. >>
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-23Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. The largest part of this is a conversion of device registration for some renesas shmobile/sh devices over to use resources. This has required coordination with the corresponding arch/sh changes, and we've agreed to merge the arch/sh changes through our tree. Added in this branch is support for Trusted Foundations secure firmware, which is what is used on many of the commercial Nvidia Tegra products that are in the market, including the Nvidia Shield. The code is local to arch/arm at this time since it's uncertain whether it will be shared with arm64 longer-term, if needed we will refactor later. A couple of new RTC drivers used on ARM boards, merged through our tree on request by the RTC maintainer. ... plus a bunch of smaller updates across the board, gpio conversions for davinci, etc" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) watchdog: davinci: rename platform driver to davinci-wdt tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data clk: versatile: fixup IM-PD1 clock implementation clk: versatile: pass a name to ICST clock provider ARM: integrator: pass parent IRQ to the SIC irqchip: versatile FPGA: support cascaded interrupts from DT gpio: davinci: don't create irq_domain in case of unbanked irqs gpio: davinci: use chained_irq_enter/chained_irq_exit API gpio: davinci: add OF support gpio: davinci: remove unused variable intc_irq_num gpio: davinci: convert to use irqdomain support. gpio: introduce GPIO_DAVINCI kconfig option gpio: davinci: get rid of DAVINCI_N_GPIO gpio: davinci: use {readl|writel}_relaxed() instead of __raw_* serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field ...
2014-01-23Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-22Revert "usbcore: set lpm_capable field for LPM capable root hubs"Sarah Sharp
Commit 9df89d85b407690afa46ddfbccc80bec6869971d "usbcore: set lpm_capable field for LPM capable root hubs" was created under the assumption that all USB host controllers should have USB 3.0 Link PM enabled for all devices under the hosts. Unfortunately, that's not the case. The xHCI driver relies on knowledge of the host hardware scheduler to calculate the LPM U1/U2 timeout values, and it only sets lpm_capable to one for Intel host controllers (that have the XHCI_LPM_SUPPORT quirk set). When LPM is enabled for some Fresco Logic hosts, it causes failures with a AgeStar 3UBT USB 3.0 hard drive dock: Jan 11 13:59:03 sg-laptop kernel: usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd Jan 11 13:59:03 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U1 failed. Jan 11 13:59:08 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U2 failed. Jan 11 13:59:08 sg-laptop kernel: usb-storage 3-1:1.0: USB Mass Storage device detected Jan 11 13:59:08 sg-laptop mtp-probe[613]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1" Jan 11 13:59:08 sg-laptop mtp-probe[613]: bus: 3, device: 2 was not an MTP device Jan 11 13:59:08 sg-laptop kernel: scsi6 : usb-storage 3-1:1.0 Jan 11 13:59:13 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U1 failed. Jan 11 13:59:18 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U2 failed. Jan 11 13:59:18 sg-laptop kernel: usbcore: registered new interface driver usb-storage Jan 11 13:59:40 sg-laptop kernel: usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd Jan 11 13:59:41 sg-laptop kernel: usb 3-1: device descriptor read/8, error -71 Jan 11 13:59:41 sg-laptop kernel: usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd Jan 11 13:59:46 sg-laptop kernel: usb 3-1: device descriptor read/8, error -110 Jan 11 13:59:46 sg-laptop kernel: scsi 6:0:0:0: Device offlined - not ready after error recovery Jan 11 13:59:46 sg-laptop kernel: usb 3-1: USB disconnect, device number 2 lspci for the affected host: 04:00.0 0c03: 1b73:1000 (rev 04) (prog-if 30 [XHCI]) Subsystem: 1043:1039 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at dd200000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1 <32us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: xhci_hcd Kernel modules: xhci_hcd The commit was backported to stable kernels, and will need to be reverted there as well. Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Reported-by: Sergey Galanov <sergey.e.galanov@gmail.com> Cc: stable@vger.kernel.org
2014-01-22xhci: Fix resume issues on Renesas chips in Samsung laptopsSarah Sharp
Don Zickus <dzickus@redhat.com> writes: Some co-workers of mine bought Samsung laptops that had mostly usb3 ports. Those ports did not resume correctly (the driver would timeout communicating and fail). This led to frustration as suspend/resume is a common use for laptops. Poking around, I applied the reset on resume quirk to this chipset and the resume started working. Reloading the xhci_hcd module had been the temporary workaround. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: Prarit Bhargava <prarit@redhat.com> Cc: stable # 2.6.37
2014-01-20Merge tag 'usb-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB pull request for 3.14-rc1 Lots of little things all over the place, and the usual USB gadget updates, and XHCI fixes (some for an issue reported by a lot of people). USB PHY updates as well as chipidea updates and fixes. All of these have been in the linux-next tree with no reported issues" * tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits) usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX usb: chipidea: need to mask INT_STATUS when write otgsc usb: chipidea: put hw_phymode_configure before ci_usb_phy_init usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28 usb: chipidea: add freescale imx28 special write register method usb: ehci: add freescale imx28 special write register method usb: core: check for valid id_table when using the RefId feature usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set usb: core: bail out if user gives an unknown RefId when using new_id usb: core: allow a reference device for new_id usb: core: add sanity checks when using bInterfaceClass with new_id USB: image: correct spelling mistake in comment USB: c67x00: correct spelling mistakes in comments usb: delete non-required instances of include <linux/init.h> usb:hub set hub->change_bits when over-current happens Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28" xhci: Set scatter-gather limit to avoid failed block writes. xhci: Avoid infinite loop when sg urb requires too many trbs usb: gadget: remove unused variable in gr_queue_int() ...
2014-01-13usb: chipidea: udc: using MultO at TD as real mult value for ISO-TXPeter Chen
We have met a bug that the high bandwidth ISO-TX transfer has failed at the last packet if it is less than 1024, the TD status shows it is "Transaction Error". The root cause of this problem is: the mult value at qh is not correct for current TD's transfer length. We use TD list to queue un-transfer TDs, and change mult for new adding TDs. If new adding TDs transfer length less than 1024, but the queued un-transfer TDs transfer length is larger than 1024, the transfer error will occur, and vice versa. Usually, this problem occurs at the last packet, and the first packet for new frame. We fixed this problem by setting Mult at QH as the largest value (3), and set MultO (Multiplier Override) at TD according to every transfer length. It can cover both hardware version less than 2.3 (the real mult is MultO if it is not 0) and 2.3+ (the real mult is min(qh.mult, td.multo)). Since the MultO bits are only existed at TX TD, we keep the ISO-RX behavior unchanged. For stable tree: 3.11+. Cc: stable <stable@vger.kernel.org> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reported-by: Matthieu Vanin <b47495@freescale.com> Tested-by: Matthieu Vanin <b47495@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>