summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)Author
2013-01-24USB: misc: usb3503: add dt supportDongjin Kim
Added device tree support for usb3503 driver and add new document with device tree binding information. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24USB: UHCI: remove unused definitionWoody Suwalski
Remove an unused (and erroneous) definition from the UHCI driver. Signed-off: Woody Suwalski <terraluna977@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24USB: uhci: check buffer length to avoid memory overflowChen Gang
for function uhci_sprint_schedule: the buffer len is MAX_OUTPUT: 64 * 1024, which may not be enough: may loop UHCI_NUMFRAMES times (UHCI_NUMFRAMES is 1024) each time of loop may get more than 64 bytes so need check the buffer length to avoid memory overflow this patch fix it like this: at first, make enough room for buffering the exceeding contents judge the contents which written whether bigger than buffer length if bigger (the exceeding contents will be in the exceeding buffer) break current work flow, and return. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24usb: gadget: constify all struct usb_gadget_opsFelipe Balbi
Add the missing 'const' keyword to all struct usb_gadget_ops in the gadget framework. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: mv_udc: fix the value of tranceiverChao Xie
usally we will use udc->tranceiver == NULL or udc->tranceiver != NULL. So when failed to get the udc->tranceiver by usb_get_phy(), we directly set udc->tranceiver to be NULL. Then the source code will not need macro IS_ERR_OR_NULL() for udc->tranceiver judgement. It can reduce the line size and make the judgement simple. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: host: ehci-mv: remove unused variableChao Xie
Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: otg: mv_otg: use devm_xxx for probeChao Xie
use devm_xxx for otg driver probe. So we do need care about the resources release in driver remove or failure handling in driver probe. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: mv_udc: fix the warning of mv_udc_removeChao Xie
The __exit_p() will be NULL if MODULE is no defined. It will cause the warning. Removing __exit_p to remove the warning. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: mv_udc: use devm_xxx for probeChao Xie
use devm_xxx for udc driver probe. So we do need care about the resources release in driver remove or failure handling in driver probe. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: completely remove ->start/->stopFelipe Balbi
Those have been deprecated for a long time and previous patches just converted all remaining users of those. Since there are no in-tree users and we don't want any new users for them, let's obliterate every piece of code related to those calls. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: s3c2410: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: pxa27x_udc: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: pxa25x_udc: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: pch_udc: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: omap_udc: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: m66592-udc: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: fsl_udc_core: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: goku_udc: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: fusb300_udc: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: amd5536udc: convert to udc_start/udc_stopFelipe Balbi
Mechanical change making use of the new (can we still call it new ?) interface for registering UDC drivers. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: Using correct way to clear usb3.0 device's remote wakeup feature.Lan Tianyu
Usb3.0 device defines function remote wakeup which is only for interface recipient rather than device recipient. This is different with usb2.0 device's remote wakeup feature which is defined for device recipient. According usb3.0 spec 9.4.5, the function remote wakeup can be modified by the SetFeature() requests using the FUNCTION_SUSPEND feature selector. This patch is to use correct way to disable usb3.0 device's function remote wakeup after suspend error and resuming. This should be backported to kernels as old as 3.4, that contain the commit 623bef9e03a60adc623b09673297ca7a1cdfb367 "USB/xhci: Enable remote wakeup for USB3 devices." Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2013-01-24usb: Prevent dead ports when xhci is not enabledDavid Moore
When the xHCI driver is not available, actively switch the ports to EHCI mode since some BIOSes leave them in xHCI mode where they would otherwise appear dead. This was discovered on a Dell Optiplex 7010, but it's possible other systems could be affected. This should be backported to kernels as old as 3.0, that contain the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: David Moore <david.moore@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2013-01-24USB: XHCI: fix memory leak of URB-private dataAlan Stern
This patch (as1640) fixes a memory leak in xhci-hcd. The urb_priv data structure isn't always deallocated in the handle_tx_event() routine for non-control transfers. The patch adds a kfree() call so that all paths end up freeing the memory properly. This patch should be backported to kernels as old as 2.6.36, that contain the commit 8e51adccd4c4b9ffcd509d7f2afce0a906139f75 "USB: xHCI: Introduce urb_priv structure" Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-and-tested-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz> CC: <stable@vger.kernel.org>
2013-01-24drivers: xhci: fix incorrect bit testNickolai Zeldovich
Fix incorrect bit test that originally showed up in 4ee823b83bc9851743fab756c76b27d6a1e2472b "USB/xHCI: Support device-initiated USB 3.0 resume." Use '&' instead of '&&'. This should be backported to kernels as old as 3.4. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2013-01-24xhci: Fix TD size for isochronous URBs.Sarah Sharp
To calculate the TD size for a particular TRB in an isoc TD, we need know the endpoint's max packet size. Isochronous endpoints also encode the number of additional service opportunities in their wMaxPacketSize field. The TD size calculation did not mask off those bits before using the field. This resulted in incorrect TD size information for isochronous TRBs when an URB frame buffer crossed a 64KB boundary. For example: - an isoc endpoint has 2 additional service opportunites and a max packet size of 1020 bytes - a frame transfer buffer contains 3060 bytes - one frame buffer crosses a 64KB boundary, and must be split into one 1276 byte TRB, and one 1784 byte TRB. The TD size is is the number of packets that remain to be transferred for a TD after processing all the max packet sized packets in the current TRB and all previous TRBs. For this TD, the number of packets to be transferred is (3060 / 1020), or 3. The first TRB contains 1276 bytes, which means it contains one full packet, and a 256 byte remainder. After processing all the max packet-sized packets in the first TRB, the host will have 2 packets left to transfer. The old code would calculate the TD size for the first TRB as: total packet count = DIV_ROUND_UP (TD length / endpoint wMaxPacketSize) total packet count - (first TRB length / endpoint wMaxPacketSize) The math should have been: total packet count = DIV_ROUND_UP (3060 / 1020) = 3 3 - (1276 / 1020) = 2 Since the old code didn't mask off the additional service interval bits from the wMaxPacketSize field, the math ended up as total packet count = DIV_ROUND_UP (3060 / 5116) = 1 1 - (1276 / 5116) = 1 Fix this by masking off the number of additional service opportunities in the wMaxPacketSize field. This patch should be backported to stable kernels as old as 3.0, that contain the commit 4da6e6f247a2601ab9f1e63424e4d944ed4124f3 "xhci 1.0: Update TD size field format." It may not apply well to kernels older than 3.2 because of commit 29cc88979a8818cd8c5019426e945aed118b400e "USB: use usb_endpoint_maxp() instead of le16_to_cpu()". Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2013-01-24xhci: Fix isoc TD encoding.Sarah Sharp
An isochronous TD is comprised of one isochronous TRB chained to zero or more normal TRBs. Only the isoc TRB has the TBC and TLBPC fields. The normal TRBs must set those fields to zeroes. The code was setting the TBC and TLBPC fields for both isoc and normal TRBs. Fix this. This should be backported to stable kernels as old as 3.0, that contain the commit b61d378f2da41c748aba6ca19d77e1e1c02bcea5 " xhci 1.0: Set transfer burst last packet count field." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2013-01-24usb: dwc3: gadget: change HIRD threshold to 12Felipe Balbi
First of all, that 28 value makes no sense as HIRD threshold is a 4-bit value, second of all it's causing issues for OMAP5. Using 12 because commit cbc725b3 (usb: dwc3: keep default hird threshold value as 4b1100) had the intention of setting the maximum allowed value of 0xc. Also, original code has been wrong forever, so this should be backported as far back as possible. Cc: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24usb: gadget: mv_udc: use udc_start and udc_stop functionsChao Xie
This patches converts the driver into the new style start/stop interface. As a result the driver no longer uses the static global the_conroller variable. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-23USB: EHCI: fix build error in ehci-mxcAlan Stern
This patch (as1643b) fixes a build error in ehci-hcd when compiling for ARM with allmodconfig: drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver' defined but not used [-Wunused-variable] drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition The fix is to convert ehci-mxc over to the new "ehci-hcd is a library" scheme so that it can coexist peacefully with the ehci-platform driver. As part of the conversion the ehci_mxc_priv data structure, which was allocated dynamically, is now placed where it belongs: in the private area at the end of struct ehci_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-23usb: phy: samsung: Remove __devinit, __devexit_p and __exit annotationsVivek Gautam
Dropping __devinit, __devexit_p, __exit annotations since they are nop and no longer supported. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-23USB: ohci-exynos: Add phy driver supportVivek Gautam
Adding the phy-driver to ohci-exynos. Keeping the platform data for continuing the smooth operation for boards which still uses it Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-23USB: ehci-s5p: Add phy driver supportVivek Gautam
Adding the phy driver to ehci-s5p. Keeping the platform data for continuing the smooth operation for boards which still uses it Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-23usb: phy: samsung: Add host phy support to samsung-phy driverVivek Gautam
This patch adds host phy support to samsung-usbphy driver and further adds support for samsung's exynos5250 usb-phy. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-23ARM: EXYNOS: Update & move usb-phy types to generic include layerVivek Gautam
Updating the names of usb-phy types to more generic names: USB_PHY_TYPE_DEIVCE & USB_PHY_TYPE_HOST; and further update its dependencies. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-22usb: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22USB: EHCI: add a name for the platform-private fieldAlan Stern
This patch (as1642) adds an ehci->priv field for private use by EHCI platform drivers. The space was provided some time ago, but it didn't have a name. Until now none of the platform drivers has used this private space, but that's about to change in the next patch of this series. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22USB: EHCI: fix incorrect configuration testAlan Stern
This patch (as1641) fixes a minor bug in ehci-hcd left over from when the Chipidea driver was converted to the "ehci-hcd is a library" scheme. The test for whether the Chipidea platform driver is active should be IS_ENABLED(), not defined(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22USB: EHCI: Move definition of EHCI_STATS to ehci.hRoger Quadros
Without this, platform drivers e.g. ehci-omap.c will see a different version of struct ehci_hcd than ehci-hcd.c and break reference to 'debug_dir' and 'priv' members when CONFIG_USB_DEBUG is enabled. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22USB: UHCI: fix IRQ race during initializationAlan Stern
This patch (as1644) fixes a race that occurs during startup in uhci-hcd. If the IRQ line is shared with other devices, it's possible for the handler routine to be called before the data structures are fully initialized. The problem is fixed by adding a check to the IRQ handler routine. If the initialization hasn't finished yet, the routine will return immediately. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: "Huang, Adrian (ISS Linux TW)" <adrian.huang@hp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21USB: Set usb port's DeviceRemovable according acpi informationLan Tianyu
ACPI provide "_PLD" and "_UPC" aml methods to describe usb port visibility and connectability. This patch is to add usb_hub_adjust_DeviceRemovable() to adjust usb hub port's DeviceRemovable according ACPI information and invoke it in the rh_call_control(). When hub descriptor request is issued at first time, usb port device isn't created and usb port is not bound with acpi. So first hub descriptor request is not changed based on ACPI information. After usb port devices being created, call usb_hub_adjust_DeviceRemovable in the hub_configure() and then set hub port's DeviceRemovable according ACPI information and this also works for non-root hub. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21drivers/usb/chipidea/core.c: adjust duplicate testJulia Lawall
Delete successive tests to the same location. In this case res has already been tested for being NULL, and calling devm_request_and_ioremap will not make it NULL. On the other hand, devm_request_and_ioremap can return NULL on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21Merge tag 'fixes-for-v3.8-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.8-rc5 Finally we have a build fix for fsl-mxc-udc UDC driver. We also have a fix for ep0 maxburst setting on DWC3 which could confuse the HW if we tell it we had way too many streams on that endpoint when it _has_ to be only one. cppi_dma support for MUSB got a fix when running as a module. By dropping the wrong __init annotation, the function will be available even when we're modules and we're done with .init.text section. Last, but not least, we have a fix on FunctionFS which was causing a bug on our option parsing algorithm.
2013-01-21usb: gadget: fix two sparse warningsFelipe Balbi
drivers/usb/gadget/u_serial.c:1291:5: sparse: symbol \ 'userial_init' was not declared. Should it be static? drivers/usb/gadget/zero.c:66:25: sparse: symbol \ 'gzero_options' was not declared. Should it be static? Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: f_uac2: fix compile warningFelipe Balbi
this warning was introduced by previous patches, fix it. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: f_acm: use usb_gstrings_attach()Sebastian Andrzej Siewior
Use usb_gstrings_attach() to assign strings in f_acm to assign strings ids. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: composite: introduce usb_gstrings_attach()Sebastian Andrzej Siewior
The USB strings don't (yet) fully work in multiple configs/gadget environment. The string id is assigned to the descriptor and the struct usb_strings. We create a copy of the individual descriptor so we don't clash if we use a function more than once. However, we have only one struct usb_string for each string. Currently each function which is used multiple times checks for "id != 0" and only assigns string ids if it did not happen yet. This works well if we use the same function multiple times as long as we do it within the "one" gadget we have. Trouble starts once we use the same function in a second gadget. In order to solve this I introduce usb_gstrings_attach(). This function will crate a copy all structs except for the strings which are not copied. After the copy it will assign USB ids and attach it to cdev. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: export composite's setup & disconnect functionSebastian Andrzej Siewior
The configfs can't use all of composite's hooks because ->bind() and ->unbind() has to be done a little differently. ->disconnect() and ->setup() on the hand can be recycled. This patch exports them both so configfs can use them. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: factor out two helper functions from composite_bind()Sebastian Andrzej Siewior
This patch factors out two helper functions from composite_bind() that is composite_dev_prepare() and its counterpart composite_dev_cleanup(). This will be used by the configfs which requries a slightly different bind/setup code because part of its configurations (i.e. config descripts, cdev, …) are setup in advance and VID/PID and so one should not be overwritten. Also the setup of ep0 endpoint can be delayed until the UDC is assigned. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: udc-core: introduce UDC binding by nameSebastian Andrzej Siewior
This patch adds udc_attach_driver() which allows to bind an UDC which is specified by name to a driver. The name of available UDCs can be obtained from /sys/class/udc. This interface is intended for configfs interface. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: add a forward pointer from usb_function to its "instance"Sebastian Andrzej Siewior
We can have multiple usb_functions which origin is the same "instance". Within one USB configuration there should be only one function of an instance. This back pointer helps configfs to recoginze to which instance a given usb_function belongs. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>