summaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)Author
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-16Merge branch 'for-paul-rc' of git://gitorious.org/linux-omap-dss2/linux into ↵Paul Mundt
fbdev-fixes-for-linus * 'for-paul-rc' of git://gitorious.org/linux-omap-dss2/linux: OMAP: OMAPFB: disable old omapfb for OMAP4 builds OMAP: DSS: VRAM: Align start & size of vram to 2M
2010-12-15OMAP: OMAPFB: disable old omapfb for OMAP4 buildsTomi Valkeinen
Build fails when OMAP4 and FB_OMAP are defined: drivers/built-in.o: In function `omapfb_do_probe': drivers/video/omap/omapfb_main.c:1773: undefined reference to `omap2_int_ctrl' Old omapfb does not work on OMAP4, and never will. Change the omapfb build dependency so that old omapfb depends on OMAP1/2/3, fixing the build for plain OMAP4 builds. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-12-15OMAP: DSS: VRAM: Align start & size of vram to 2MTomi Valkeinen
Align the start address and size of VRAM area to 2M as per comments from Russell King: > > So, why SZ_2M? > > Firstly, that's the granularity which we allocate page tables - one > Linux page table covers 2MB of memory. We want to avoid creating page > tables for the main memory mapping as that increases TLB pressure through > the use of additional TLB entries, and more page table walks. > > Plus, we never used to allow the kernel's direct memory mapping to be > mapped at anything less than section size - this restriction has since > been lifted due to OMAP SRAM problems, but I'd rather we stuck with it > to ensure that we have proper behaviour from all parts of the system. > > Secondly, we don't want to end up with lots of fragmentation at the end > of the memory mapping as that'll reduce performance, not only by making > the pfn_valid() search more expensive. > > Emsuring a minimum allocation size and alignment makes sure that the > regions can be coalesced together into one block, and minimises run-time > expenses. > > So please, 2MB, or if you object, at the _very_ _least_ 1MB. But > definitely not PAGE_SIZE. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com>
2010-12-14fbdev: Fix fb_find_nearest_mode refresh comparisonAndrew Kephart
Refresh rate nearness is not calculated or reset when nearest resolution changes. This patch resets the refresh rate differential measurement whenever a new nearest resolution is discovered. This fixes two error cases; first, wherein the first mode's refresh rate differential is never calculated and second, when the closest refresh rate from a previous nearest resolution is erroneously preserved. Signed-off-by: Andrew Kephart <andrew.kephart@alereon.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-01lxfb: Maintain video processor palette through suspend/resumeDaniel Drake
The Geode X driver uses both of the LX's palettes, one for gamma correction and one for colormaps. The kernel driver currently only backs up the one used for colormaps during suspend/resume. If you mess with gamma settings and do a suspend/resume, colors go funny. Fix this by backing up the video proc palette during suspend/resume, alongside the display controller one which is already handled. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-01video: da8xx: Register IRQ as last thing in driver probing.Caglar Akyuz
Following commit exposed a bug in driver: "fbdev: da8xx/omap-l1xx: implement double buffering" Bug is, if interrupt handler is called before initialization is finished, raster controller is enabled and following register modifications causes hardware to stay in a broken state. By looking at this one may say that proper locking is missing in this driver, and a more proper fix should be prepared. However, aformentioned commit causes a regression in the driver and some fix to current one should be applied first. Signed-off-by: Caglar Akyuz <caglar@bilkon-kontrol.com.tr> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-26framebuffer: fix fbcmap.c kernel-doc warningRandy Dunlap
Fix kernel-doc warning in fbcmap.c: Warning(drivers/video/fbcmap.c:92): No description found for parameter 'flags' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-25Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6482/2: Fix find_next_zero_bit and related assembly ARM: 6490/1: MM: bugfix: initialize spinlock for init_mm.context ARM: avoid annoying <4>'s in printk output SCSI: arm fas216: fix missing ';' ARM: avoid marking decompressor .stack section as having contents ARM: 6489/1: thumb2: fix incorrect optimisation in usracc ARM: 6488/1: nomadik: prevent sched_clock() wraparound ARM: 6484/1: fix compile warning in mm/init.c ARM: 6473/1: Small update to ux500 specific L2 cache code ARM: improve compiler's ability to optimize page tables mx25: fix spi device registration typo ARM i.MX27 eukrea: Fix compilation ARM i.MX spi: fix compilation for i.MX21 ARM i.MX pcm037 eet: compile fixes ARM i.MX: sdma is merged, so remove #ifdef SDMA_IS_MERGED ARM mx3fb: check for DMA engine type mach-pcm037_eet: Fix section mismatch for eet_init_devices()
2010-11-25Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: sisfb: delete osdef.h sisfb: move the CONFIG warning to sis_main.c sisfb: replace SiS_SetMemory with memset_io sisfb: remove InPort/OutPort wrappers sisfb: use CONFIG_FB_SIS_301/315 instead of SIS301/315H sisfb: delete redudant #define SIS_LINUX_KERNEL sisfb: delete dead SIS_XORG_XF86 code sisfb: delete fallback code for pci_map_rom() sisfb: delete obsolete PCI ROM bug workaround fbdev: Update documentation index file. lxfb: Program panel v/h sync output polarity correctly fbcmap: integer overflow bug fbcmap: cleanup white space in fb_alloc_cmap() MAINTAINERS: Add fbdev patchwork entry, tidy up file patterns. fbdev: da8xx: punt duplicated FBIO_WAITFORVSYNC define fbdev: sh_mobile_lcdcfb: fix bug in reconfig()
2010-11-25backlight: grab ops_lock before testing bd->opsUwe Kleine-König
According to the comment describing ops_lock in the definition of struct backlight_device and when comparing with other functions in backlight.c the mutex must be hold when checking ops to be non-NULL. Fixes a problem added by c835ee7f4154992e6 ("backlight: Add suspend/resume support to the backlight core") in Jan 2009. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-24sisfb: delete osdef.hAaro Koskinen
The file is not needed. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: move the CONFIG warning to sis_main.cAaro Koskinen
sis_main.c is always compiled, so we can check Kconfig options there. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: replace SiS_SetMemory with memset_ioAaro Koskinen
Get rid of one more wrapper. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: remove InPort/OutPort wrappersAaro Koskinen
Remove register IO wrappers. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: use CONFIG_FB_SIS_301/315 instead of SIS301/315HAaro Koskinen
There is no need to alias CONFIG #defines. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete redudant #define SIS_LINUX_KERNELAaro Koskinen
It's not needed anymore with SIS_XORG_XF86 gone. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete dead SIS_XORG_XF86 codeAaro Koskinen
Delete code for compiling the driver for X.org/XFree86. The development has forked, so there is no point keeping this code in the tree. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete fallback code for pci_map_rom()Aaro Koskinen
If pci_map_rom() fails, there is some fallback code that basically duplicates pci_map_rom() on non-x86 platforms. No point in that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete obsolete PCI ROM bug workaroundAaro Koskinen
Delete a workaround for a PCI ROM bug that has been fixed ages ago by the commit 761a3ac08c63718dacde12aaf0ec6d6760e8c2b7. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-23Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17lxfb: Program panel v/h sync output polarity correctlyDaniel Drake
Commit b5c26f97ec4a17c65 introduced some breakage for the OLPC XO-1 laptop, differences in the output video signal after the patch caused some problems with the XO's display controller chip. Reviewing of that commit against the AMD Geode LX Data Book, it seems that these bits were being set inversely. In both cases, active high output is denoted by a value of 0. See section 6.8.3.44 of the databook from February 2009 (Publication ID: 33234H) Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17fbcmap: integer overflow bugDan Carpenter
There is an integer overflow in fb_set_user_cmap() because cmap->len * 2 can wrap. It's basically harmless. Your terminal will be messed up until you type reset. This patch does three things to fix the bug. First, it checks the return value of fb_copy_cmap() in fb_alloc_cmap(). That is enough to fix address the overflow. Second it checks for the integer overflow in fb_set_user_cmap(). Lastly I wanted to cap "cmap->len" in fb_set_user_cmap() much lower because it gets used to determine the size of allocation. Unfortunately no one knows what the limit should be. Instead what this patch does is makes the allocation happen with GFP_KERNEL instead of GFP_ATOMIC and lets the kmalloc() decide what values of cmap->len are reasonable. To do this, the patch introduces a function called fb_alloc_cmap_gfp() which is like fb_alloc_cmap() except that it takes a GFP flag. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17fbcmap: cleanup white space in fb_alloc_cmap()Dan Carpenter
checkpatch.pl and Andrew Morton both complained about the indenting in fb_alloc_cmap() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-16backlight: constify backlight_opsLionel Debroux
backlight_device_register has been expecting a const "ops" argument, and using it as such, since 9905a43b2d563e6f89e4c63c4278ada03f2ebb14. Let's make the remaining backlight_ops instances const. Inspired by hunks of the grsecurity patch, updated for newer kernels. Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-16fbdev: sh_mobile_lcdcfb: fix bug in reconfig()Arnd Hannemann
The function sh_mobile_fb_reconfig() contained a bug, which caused the line_length to be set wrongly, if a mode with a different X-resolution than the default one was chosen. This caused 1080p24 mode to not work on AP4EVB. Additionally the notifier chain was also called with the wrong mode. This patch fixes this, by using the X-resolution of the new mode instead of the old one to calculate line length and hands over the correct mode to the notifier chain. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata
2010-11-15i2c: Delete unused adapter IDsJean Delvare
Delete unused I2C adapter IDs. Special cases are: * I2C_HW_B_RIVA was still set in driver rivafb, however no other driver is ever looking for this value, so we can safely remove it. * I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no adapter ID is ever set to this value, so the code in question never runs. As the code additionally expects that I2C_HW_B_HDPVR may not be defined, we can delete it now and let the lirc_zilog driver maintainer rewrite this piece of code. Big thanks for Hans Verkuil for doing all the hard work :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
2010-11-15Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: fsl-diu-fb: drop dead ioctl define MAINTAINERS: Add an fbdev git tree entry. OMAP: DSS: Fix documentation regarding 'vram' kernel parameter OMAP: VRAM: Fix boot-time memory allocation OMAP: VRAM: improve VRAM error prints sisfb: limit POST memory test according to PCI resource length fbdev: sh_mobile_lcdc: use correct number of modes, when using the default fbdev: sh_mobile_lcdc: use the standard CEA-861 720p timing fbdev: sh_mobile_hdmi: properly clean up modedb on monitor unplug
2010-11-15ARM mx3fb: check for DMA engine typeSascha Hauer
We have two dma engines in MX3 systems: The IPU and the SDMA engine. We have to check if we got a channel from the correct engine before proceeding with a channel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2010-11-12backlight: MacBookAir3,1(3,2) mbp-nvidia-bl supportEdgar (gimli) Hucek
Add support for the MacBookAir3,1 and MacBookAir3,2 to the mbp-nvidia-bl driver. Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/adp8860_bl.c: check strict_strtoul() return valueMichael Hennerich
Handle return value, strict_strtoul is declared with attribute warn_unused_result. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/adp8860_bl.c: fix ambient light zone overwrite handlingMichael Hennerich
This affects the get/set of the current Ambient Light Zone. Reading should return an integer between 1..3 (1 = Daylight, 2 = office, 3 = dark). Writing a value between 1..3 forces the backlight controller to enter the corresponding Ambient Light Zone. Writing 0 returns to normal operation. Fix valid range checking so we don't write invalid values to the controller, and make sure we subtract 1, since this is what the register definition (CFGR:BLV) requires. Otherwise the values written don't work correctly. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12backlight: add low threshold to pwm backlightArun Murthy
The intensity of the backlight can be varied from a range of max_brightness to zero. Though most, if not all the pwm based backlight devices start flickering at lower brightness value. And also for each device there exists a brightness value below which the backlight appears to be turned off though the value is not equal to zero. If the range of brightness for a device is from zero to max_brightness. A graph is plotted for brightness Vs intensity for the pwm based backlight device has to be a linear graph. intensity | / | / | / |/ --------- 0 max_brightness But pratically on measuring the above we note that the intensity of backlight goes to zero(OFF) when the value in not zero almost nearing to zero(some x%). so the graph looks like intensity | / | / | / | | ------------ 0 x max_brightness In order to overcome this drawback knowing this x% i.e nothing but the low threshold beyond which the backlight is off and will have no effect, the brightness value is being offset by the low threshold value(retaining the linearity of the graph). Now the graph becomes intensity | / | / | / | / ------------- 0 max_brightness With this for each and every digit increment in the brightness from zero there is a change in the intensity of backlight. Devices having this behaviour can set the low threshold brightness(lth_brightness) and pass the same as platform data else can have it as zero. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/s6e63m0.c: fix section mismatchAxel Lin
Eliminate section mismatch warning by marking s6e63m0_probe() as __devinit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Cc: InKi Dae <inki.dae@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/s6e63m0.c: unregister backlight device and remove ↵Axel Lin
sysfs attribute file in s6e63m0_remove s6e63m0_probe() registered backlight device and create sysfs attribute files, thus s6e63m0_remove() should unregister backlight device and remove sysfs attribute files. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Cc: InKi Dae <inki.dae@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12backlight: fix blanking for L4F00242T03 LCDMarek Vasut
The LCD was turned on if the variable power was > 0, but that was incorrect. The LCD has to be turned on in NORMAL and UNBLANK case. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12backlight: fix blanking for LMS283GF05 LCDMarek Vasut
The LCD was turned on if the variable power was > 0, but that was incorrect. The LCD has to be turned on in NORMAL and UNBLANK case. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/s6e63m0.c: set permissions on gamma_table file to 0444Axel Lin
gamma_table is not writable, so set permissions to 0444. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-10OMAP: VRAM: Fix boot-time memory allocationTomi Valkeinen
Use memblock_free() and memblock_remove() to remove the allocated or reserved VRAM area from normal kernel memory. This is a slightly modified version of patches from Felipe Contreras and Namhyung Kim. Reported-by: Felipe Contreras <felipe.contreras@gmail.com> Reported-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10OMAP: VRAM: improve VRAM error printsTomi Valkeinen
Improve the error prints to give more information about the offending address & size. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10sisfb: limit POST memory test according to PCI resource lengthAaro Koskinen
If the POST memory test fails, the driver may access illegal memory areas. Instead of hard coding the maximum size, set it according to the PCI resource length (an additional check is needed in sisfb_post_map_vram() to ensure it's big enough). DRAM sizing will later adjust video_size to the correct value. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_lcdc: use correct number of modes, when using the defaultGuennadi Liakhovetski
Fix zero mode number, when using the default 720p mode. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_lcdc: use the standard CEA-861 720p timingGuennadi Liakhovetski
sh_mobile_lcdcfb.c has a hard-coded 720p video mode, used as default, if none is explicitly specified by the platform. Adjust its timing to match the CEA standard. Also add an explicit refresh rate value, which is needed, when used with HDMI, to be able to recognise the default 720p mode as a pre-programmed VIC #4. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_hdmi: properly clean up modedb on monitor unplugGuennadi Liakhovetski
Even though this is not a problem currently, it is better to clear the freed pointer and nullify the length of the freed memory. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-30Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits) ARM: memblock: setup lowmem mappings using memblock ARM: memblock: move meminfo into find_limits directly ARM: memblock: convert free_highpages() to use memblock ARM: move freeing of highmem pages out of mem_init() ARM: memblock: convert memory detail printing to use memblock ARM: memblock: use memblock to free memory into arm_bootmem_init() ARM: memblock: use memblock when initializing memory allocators ARM: ensure membank array is always sorted ARM: 6466/1: implement flush_icache_all for the rest of the CPUs ARM: 6464/2: fix spinlock recursion in adjust_pte() ARM: fix memblock breakage ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt ARM: 6449/1: Fix for compiler warning of uninitialized variable. ARM: 6445/1: fixup TCM memory types ARM: imx: Add wake functionality to GPIO ARM: mx5: Add gpio-keys to mx51 babbage board ARM: imx: Add gpio-keys to plat-mxc mx31_3ds: Fix spi registration mx31_3ds: Fix the logic for detecting the debug board ...
2010-10-29Merge branches 'msm-fixes' and 'msm-video' of ↵Linus Torvalds
git://codeaurora.org/quic/kernel/dwalker/linux-msm * 'msm-fixes' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: msm: Kconfig: drop unused config options msm: fix compile failure when no debug uart is selected msm: fix debug-macro.S build failure msm: timer: Decrease shift on timer clocksource arm: mach-msm: fix error handling in msm_iommu_probe() msm: fix Kconfig target board selection msm: fix compile failure on struct membank node member * 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses drivers: msm: video: add dev_set_name call drivers: video: msm: fix hang on disable_irq
2010-10-28Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile