summaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)Author
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits) sh: remove dead LED code for migo-r and ms7724se sh: ecovec build fix for CONFIG_I2C=n sh: ecovec r-standby support sh: ms7724se r-standby support sh: SH-Mobile R-standby register save/restore clocksource: Fix up a registration/IRQ race in the sh drivers. sh: ms7724: modify scan_timing for KEYSC sh: ms7724: Add sh_sir support sh: mach-ecovec24: Add sh_sir support sh: wire up SET/GET_UNALIGN_CTL. sh: allow alignment fault mode to be configured at kernel boot. sh: sh7724: Update FSI/SPU2 clock sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec sh: add sh7724 kick callback to clk_div4_table sh: introduce struct clk_div4_table sh: clock-cpg div4 set_rate() shift fix sh: Turn on speculative return for SH7785 and SH7786 sh: Merge legacy and dynamic PMB modes. sh: Use uncached I/O helpers in PMB setup. sh: Provide uncached I/O helpers. ...
2010-02-25Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits) of: remove undefined request_OF_resource & release_OF_resource of/sparc: Remove sparc-local declaration of allnodes and devtree_lock of: move definition of of_chosen into common code. of: remove unused extern reference to devtree_lock of: put default string compare and #a/s-cell values into common header of/flattree: Don't assume HAVE_LMB of: protect linux/of.h with CONFIG_OF proc_devtree: fix THIS_MODULE without module.h of: Remove old and misplaced function declarations of/flattree: Make the kernel accept ePAPR style phandle information of/flattree: endian-convert members of boot_param_header of: assume big-endian properties, adding conversions where necessary of: use __be32 for cell value accessors of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing of/flattree: use callback to setup initrd from /chosen proc_devtree: include linux/of.h of: make set_node_proc_entry private to proc_devtree.c of: include linux/proc_fs.h of/flattree: merge early_init_dt_scan_memory() common code of: add 'of_' prefix to machine_is_compatible() ...
2010-02-22efifb: fix framebuffer handoffMarcin Slusarz
Commit 4410f3910947dcea8672280b3adecd53cec4e85e ("fbdev: add support for handoff from firmware to hw framebuffers") didn't add fb_destroy operation to efifb. Fix it and change aperture_size to match size passed to request_mem_region. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15151 Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reported-by: Alex Zhavnerchik <alex.vizor@gmail.com> Tested-by: Alex Zhavnerchik <alex.vizor@gmail.com> Acked-by: Peter Jones <pjones@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-17sh: Fix up more 64-bit pgprot truncation on SH-X2 TLB.Paul Mundt
Both the store queue API and the PMB remapping take unsigned long for their pgprot flags, which cuts off the extended protection bits. In the case of the PMB this isn't really a problem since the cache attribute bits that we care about are all in the lower 32-bits, but we do it just to be safe. The store queue remapping on the other hand depends on the extended prot bits for enabling userspace access to the mappings. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16video: sh_mobile_lcdcfb: Fix panning.Phil Edworthy
Fixed SH-Mobile panning. Previously the address of the frame to be displayed was updated in the VSync end interrupt. This meant there was a minimum of 1 frame bewteen calling FBIOPAN_DISPLAY ioctl and the pan occuring. This meant that apps were not able to use the FBIO_WAITFORVSYNC ioctl to wait for the pan to complete. This patch moves the write to LDSA1R mirror reg into the pan ioctl. Tested on MS7724 board against 2.6.33-rc7 Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16video: sh_mobile_lcdcfb: Add wait for vsync.Phil Edworthy
Added FBIO_WAITFORVSYNC ioctl for SH-Mobile devices. Tested on MS7724 and MigoR boards against 2.6.33-rc7. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09of: add 'of_' prefix to machine_is_compatible()Grant Likely
machine is compatible is an OF-specific call. It should have the of_ prefix to protect the global namespace. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-02imxfb: correct location of callbacks in suspend and resumeUwe Kleine-König
The probe function passes a pointer to a struct fb_info to platform_set_drvdata(), so don't interpret the return value of platform_get_drvdata() as a pointer to struct imxfb_info. The original imxfb_info *fbi backlight_power was NULL but in imxfb_suspend it was 4 resulting in an oops as imxfb_suspend calls imxfb_disable_controller(fbi) which in turn has if (fbi->backlight_power) fbi->backlight_power(0); Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-02mx3fb: some debug and initialisation fixesAlberto Panizzo
Fix the kernel oops when dev_dbg is called with mx3_fbi->txd == NULL Fix the late initialisation of mx3fb->backlight_level. If not, in the chain of function started by init_fb_chan(), in __blank() call sdc_set_brightness(mx3fb, mx3fb->backlight_level) that will shut down the CONTRAST PWM output. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski <at> gmx.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-28Merge commit 'v2.6.33-rc5' into secretlab/test-devicetreeGrant Likely
2010-01-28of: unify phandle name in struct device_nodeGrant Likely
In struct device_node, the phandle is named 'linux_phandle' for PowerPC and MicroBlaze, and 'node' for SPARC. There is no good reason for the difference, it is just an artifact of the code diverging over a couple of years. This patch renames both to simply .phandle. Note: the .node also existed in PowerPC/MicroBlaze, but the only user seems to be arch/powerpc/platforms/powermac/pfunc_core.c. It doesn't look like the assignment between .linux_phandle and .node is significantly different enough to warrant the separate code paths unless ibm,phandle properties actually appear in Apple device trees. I think it is safe to eliminate the old .node property and use phandle everywhere. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-16revert "drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer"Mark Brown
Fix divide by zero and broken output. Commit 600ce1a0fa ("fix clock setting for Samsung SoC Framebuffer") introduced a mandatory refresh parameter to the platform data for the S3C framebuffer but did not introduce any validation code, causing existing platforms (none of which have refresh set) to divide by zero whenever the framebuffer is configured, generating warnings and unusable output. Ben Dooks noted several problems with the patch: - The platform data supplies the pixclk directly and should already have taken care of the refresh rate. - The addition of a window ID parameter doesn't help since only the root framebuffer can control the pixclk. - pixclk is specified in picoseconds (rather than Hz) as the patch assumed. and suggests reverting the commit so do that. Without fixing this no mainline user of the driver will produce output. [akpm@linux-foundation.org: don't revert the correct bit] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16viafb: fix acceleration for some chipsErik-Jan Post
Fix a regression in hardware acceleration which made the accelerated framebuffer unusable on some chips. These need extra initialization and an extra flag which is no longer needed/available on current chips. Signed-off-by: Erik-Jan Post <ej.lfs@xs4all.nl> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16viafb: do modesetting after updating variablesErik-Jan Post
Reorder viafb_set_par to allow using the updated variables in viafb_setmode. This fixes a regression that prevented proper runtime mode changes. Signed-off-by: Erik-Jan Post <ej.lfs@xs4all.nl> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16viafb: fix LCD hardware cursor regressionFlorian Tobias Schandinat
Although I'd consider this a hardware bug, as there is hardware out that for whatever reason does not support hardware cursors on LCD output we have to care about it in the driver. This fixes a regression (invisible cursor) introduced by: viafb: cleanup viafb_cursor Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Reported-by: Julian Wollrath <jwollrath@web.de> Tested-by: Julian Wollrath <jwollrath@web.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-12Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded OMAP: DSS2: Reject scaling settings when they cannot be supported OMAP: DSS2: Make check-delay-loops consistent OMAP: DSS2: OMAPFB: fix omapfb_free_fbmem() video/omap: add __init/__exit macros to drivers/video/omap/lcd_htcherald.c OMAP: DSS2: Fix compile warning MAINTAINERS: Combine DSS2 and OMAPFB2 into one entry MAINTAINERS: change omapfb maintainer OMAP: OMAPFB: add dummy release function for omapdss OMAP: OMAPFB: fix clk_get for RFBI OMAP: DSS2: RFBI: convert to new kfifo API OMAP: DSS2: Fix crash when panel doesn't define enable_te() OMAP: DSS2: Collect interrupt statistics OMAP: DSS2: DSI: print debug DCS cmd in hex OMAP: DSS2: DSI: fix VC channels in send_short and send_null
2010-01-12OMAP: DSS2: OMAPFB: fix crash when panel driver was not loadedTomi Valkeinen
If the panel's probe had failed, omapfb would still go on, eventually crashing. A better fix would be to handle each display properly, and leaving just the failed display out. But that is a bigger change. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-01-12OMAP: DSS2: Reject scaling settings when they cannot be supportedVille Syrjälä
If the scaling ratio is below 0.5 video output width can't be identical to the display width. Reject such settings. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-01-11Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (26 commits) OMAP2 clock: dynamically allocate CPUFreq frequency table OMAP clock/CPUFreq: add clk_exit_cpufreq_table() OMAP2xxx OPP: clean up comments in OPP data OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled OMAP1 clock: remove __initdata from struct clk_functions to prevent crash OMAP1 clock: Add missing clocks for OMAP 7xx OMAP clock: remove incorrect EXPORT_SYMBOL()s OMAP3 clock: Add capability to change rate of dpll4_m5_ck OMAP3 clock: McBSP 2, 3, 4 functional clock parent is PER_96M_FCLK, not CORE_96M_FCLK OMAP3: clock: add clockdomains for UART1 & 2 OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space OMAP2xxx IO mapping: mark DSP mappings as being 2420-only ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access. OMAP2: remove duplicated #include omap3: EVM: Choose OMAP_PACKAGE_CBB omap3: Fix booting if package is uninitialized omap3: add missing parentheses omap3: add missing parentheses omap2/3: ZOOM: Correcting key mapping for few keys omap2/3: make serial_in_override() address the right uart port ...
2010-01-11OMAP: DSS2: Make check-delay-loops consistentTomi Valkeinen
Loops checking for certain condition were rather inconsistent. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com>
2010-01-11OMAP: DSS2: OMAPFB: fix omapfb_free_fbmem()Tomi Valkeinen
Fixes bug causing VRFB memory area to be released twice. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Reported-by: Eino-Ville Talvala <talvala@stanford.edu>
2010-01-11video/omap: add __init/__exit macros to drivers/video/omap/lcd_htcherald.cPeter Huewe
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of drivers/video/omap/lcd_htcherald.c Please have a look at the small patch and either pull it through your tree, or please ack' it so Jiri can pull it through the trivial tree. Patch against linux-next-tree, 22. Dez 08:38:18 CET 2009 but also present in linus tree. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Tony Lindgren <tony@atomide.com>
2010-01-11OMAP: DSS2: Fix compile warningVaibhav Hiremath
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-01-11OMAP: OMAPFB: add dummy release function for omapdssTomi Valkeinen
This should fix: WARNING: at drivers/base/core.c:131 device_release+0x68/0x7c() Device 'omapdss' does not have a release() function, it is broken and must be fixed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-01-11OMAP: OMAPFB: fix clk_get for RFBITomi Valkeinen
omapfb platform device was still used to get clocks inside rfbi.c Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Tested-by: Sergey Lapin <slapin@ossfans.org>
2010-01-11OMAP: DSS2: RFBI: convert to new kfifo APITomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-01-08omap1: Fix compile for omap1_bl.cTony Lindgren
Commit 9905a43b made struct backlight_ops const. Omap was setting check_fb dynamically, which caused the following compile error: drivers/video/backlight/omap1_bl.c: In function 'omapbl_probe': drivers/video/backlight/omap1_bl.c:142: error: assignment of read-only variable 'omapbl_ops' Turns out pdata->check_fb is not being used, so just remove it to fix the compile. Cc: Emese Revfy <re.emese@gmail.com> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08OMAP: DSS2: Fix crash when panel doesn't define enable_te()Tomi Valkeinen
DSI driver didn't check if the panel driver actually implements enable_te(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-01-08OMAP: DSS2: Collect interrupt statisticsTomi Valkeinen
Collect interrupt statistics, printable via debugfs: debugfs/omapdss/dispc_irq debugfs/omapdss/dsi_irq The counters are reset when printed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-01-08OMAP: DSS2: DSI: print debug DCS cmd in hexTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-01-08OMAP: DSS2: DSI: fix VC channels in send_short and send_nullTomi Valkeinen
- dsi_vc_send_short() needs to use dest_per for the peripheral id - dsi_vc_send_null() was always using channel id 0 Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-12-29[ARM] pxafb: fix building issue of incorrect referenceEric Miao
Commit "d2a34c1 drivers/video: Move dereference after NULL test" introduced a build error of "fbi->dev->platform_data->smart_update" being unknown type to the compiler, fix this by removing the unnecessary test of 'fbi'. Cc: Julia Lawall <julia@diku.dk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-24VIDEO: cyberpro: pci_request_regions needs a persistent nameRussell King
Don't pass a name pointer from the kernel stack, it will not survive and will result in corrupted /proc/iomem output. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-17Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP3: serial - fix bug introduced in mfd: twl: fix twl4030 rename for remaining driver, board files USB ehci: replace mach header with plat omap3: Allow EHCI to be built on OMAP3
2009-12-17Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: mbp_nvidia_bl - add two more MacBookPro variants backlight: Pass device through notify callback in the pwm driver backlight: PTR_ERR return of wrong pointer in cr_backlight_probe() backlight: Constify struct backlight_ops backlight/thinkpad-acpi: issue backlight class events Fix up trivial conflicts in thinkpad-acpi support (backlight support already merged earlier).
2009-12-17drivers/video/via/viafbdev.c: correct code taking the size of a pointerJulia Lawall
sizeof(viafb_gamma_table) is just the size of the pointer. This is changed to the size used when calling kmalloc to initialize the pointer. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17Revert "fbdev: atafb - add palette register check"Geert Uytterhoeven
This reverts commit 8546e3ce6e37c359979b69862442f94e0ef0e03b, as it's a partial duplicate of commit 2f390380ca69e1617cdddb12d8da94f0a9f4319d ("fbdev: add palette register check to several drivers"). The former went in first through the m68k tree, the latter through Andrew Morton. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17backlight: mbp_nvidia_bl - add two more MacBookPro variantsDaniel Ritz
This adds the MacBookPro 5,3 and 5,4 to the DMI tables. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17backlight: Pass device through notify callback in the pwm driverBen Dooks
Add the device to the notify callback's arguments in the PWM backlight driver. This brings the notify callback into line with the other callbacks defined by this driver. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17backlight: PTR_ERR return of wrong pointer in cr_backlight_probe()Roel Kluin
Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-16mfd: twl: fix twl4030 rename for remaining driver, board filesBalaji T K
Recent drivers/mfd/twl4030* renames to twl broke compile for various boards as the series was missing a patch to change the board-*.c files. This patch renames include twl4030.h to include twl.h and also renames twl4030_i2c_ routines. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits) sh: Fix test of unsigned in se7722_irq_demux() sh: mach-ecovec24: Add FSI sound support sh: mach-ecovec24: Add mt9t112 camera support sh: mach-ecovec24: Add tw9910 support sh: MSIOF/mmc_spi platform data for the Ecovec24 board sh: ms7724se: Add ak4642 support sh: Fix up FPU build for SH5 sh: Remove old early serial console code V2 sh: sh5 scif pdata (sh5-101/sh5-103) sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3) sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724) sh: sh4 scif pdata (sh7750/sh7760/sh4-202) sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720) sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg) sh: sh2 scif pdata (sh7616) sh-sci: Extend sh-sci driver with early console V2 sh: Stub in P3 ioremap support for nommu parts. sh: wire up vmallocinfo support in ioremap() implementations. sh: Make the unaligned trap handler always obey notification levels. sh: Couple kernel and user write page perm bits for CONFIG_X2TLB ...
2009-12-16intelfb: fix setting of active pipe with LVDS displaysKrzysztof Helt
The intelfb driver sets color map depending on currently active pipe. However, if an LVDS display is attached (like in laptop) the active pipe variable is never set. The default value is PIPE_A and can be wrong. Set up the pipe variable during driver initialization after hardware state was read. Also, the detection of the active display (and hence the pipe) is wrong. The pipes are assigned to so called planes. Both pipes are always enabled on my laptop but only one plane is enabled (the plane A for the CRT or the plane B for the LVDS). Change active pipe detection code to take into account a status of the plane assigned to each pipe. The problem is visible in the 8 bpp mode if colors above 15 are used. The first 16 color entries are displayed correctly. The graphics chip description is here (G45 vol. 3): http://intellinuxgraphics.org/documentation.html Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13285 Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Michal Suchanek <hramrach@centrum.cz> Cc: Dean Menezes <samanddeanus@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16viafb: cosmetic cleanup of function integrated_lvds_enable()Harald Welte
A humble attempt to simplify the coding style to improve readability Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16matroxfb: fix problems with display stabilityAlan Cox
Regression caused in 2.6.23 and then despite repeated requests never fixed or dealt with (Petr promised to sort it in 2008 but seems to have forgotten). Enough is enough - remove the problem line that was added. If it upsets someone they've had two years to deal with it and at the very least it'll rattle their cage and wake them up. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9709 Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Damon <account@bugzilla.kernel.org.juxtaposition.net> Tested-by: Ruud van Melick <rvm1974@raketnet.nl> Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Paul A. Clarke <pc@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16davinci: fb: add framebuffer blank operationChaithrika U S
Implement frame buffer blank operation feature for DA8xx/OMAP-L1xx driver. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16davinci: fb : add suspend/resume suuport for DA8xx/OMAP-L1xx fb driverChaithrika U S
Suspend/resume support DA8xx/OMAP-L1xx frame buffer driver. This feature has been tested on DA850/OMAP-L138 EVM. For the purpose of testing, the patch series[1] which adds suspend support for DA850/OMAP-L138 SoC was applied. [1] http://patchwork.kernel.org/patch/60260/ Signed-off-by: Chaithrika U S <chaithrika@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16davinci: fb: update the driver in preparation for addition of power ↵Chaithrika U S
management features Add a helper function to enable raster. Also add one member in the private data structure to track the current blank status, another function pointer which takes in the platform specific callback function to control panel power. These updates will help in adding suspend/resume and frame buffer blank operation features. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16clps711xfb: convert to proc_fopsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16drivers/video/via/viafbdev.c: fix oops with no /procDan Carpenter
Fixed a typo: missing *. This would lead to a kernel oops if the kernel was compiled without support for the /proc file system. Found with a static checker. Compile tested. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-22 21:56:02 +0000