summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog/Makefile
AgeCommit message (Collapse)Author
2010-03-06[WATCHDOG] support for max63xx watchdog timer chipsMarc Zyngier
This driver adds support for the max63{69,70,71,72,73,74} family of watchdog timer chips. It has been tested on an Arcom Zeus (max6369). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-03-06[WATCHDOG] ep93xx: implemented watchdog timer driver for TS-72xx SBCsMika Westerberg
Technologic Systems TS-72xx SBCs have external glue logic CPLD which includes watchdog timer. This driver implements kernel support for that. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-12-17MIPS: eXcite: Remove platform.Ralf Baechle
The platform has never been fully merged Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Koeller <thomas.koeller@baslerweb.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-kernel@vger.kernel.org Cc: linux-mtd@lists.infradead.org Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Wim Van Sebroeck <wim@iguana.be>
2009-12-08mpc52xx/wdt: remove obsolete old WDT implementationAlbrecht Dreß
Remove the old WDT implementation. Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-09-25[WATCHDOG] Add support for the Avionic Design Xanthos watchdog timer.Thierry Reding
This patch adds support for the watchdog timer on Avionic Design Xanthos boards. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] Add support for WM831x watchdogMark Brown
The WM831x series of devices provide a watchdog with configurable behaviour on timer expiry. Currently this driver support refreshes via a register or GPIO line and autonomous refreshes from a hardware source (eg, a clock). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] Add watchdog driver for NUC900Wan ZongShun
Add watchdog device driver for the Nuvoton NUC900 series SoCs. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] add SBC-FITPC2 watchdog driverDenis Turischev
Add support for watchdog found on SBC-FITPC2 board. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-20[WATCHDOG] add bcm47xx watchdog drivermatthieu castet
This add watchdog driver for broadcom 47xx device. It uses the ssb subsytem to access embeded watchdog device. Because the watchdog timeout is very short (about 2s), a soft timer is used to increase the watchdog period. Note : A patch for exporting the ssb_watchdog_timer_set will be submitted on next linux-mips merge. Without this patch it can't be build as a module. Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Tested-by: Florian Fainelli <florian@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-20[WATCHDOG] Freescale STMP: watchdog driverdmitry pervushin
Add watchdog timer support for Freescale STMP3xxx boards Signed-off-by: Vitaly Wool <vital@embeddedalley.com> Signed-off-by: Dmitry Pervushin <dpervushin@embeddedalley.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-20[WATCHDOG] twl4030 watchdog driverTimo Kokkonen
Implementation of twl4030 watchdog driver. Signed-off-by: Timo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-20[WATCHDOG] U300 COH 901 327 watchdog driverLinus Walleij
This patch adds support for the U300 COH 901 327 watchdog for the U300 platform recently added to RMK:s ARM tree. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-20[WATCHDOG] Add pnx833x_wdtDaniel Laird
Add support for PNX833x watchdog timer. Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-08[ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdtNicolas Pitre
The Orion watchdog driver is also used on Kirkwood. Convention is to use orion5x for stuff specific to 88F5xxx Orion chips and simply "orion" for shared stuff across SoCs including Kirkwood. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-04-08[WATCHDOG] remove ARM26 sectionsPaulius Zaleckas
Removes ARM26 sections from Kconfig and Makefile, because ARM26 is long gone. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12[WATCHDOG] Pika Warp appliance watchdog timerSean MacLennan
The FPGA based watchdog timer used by the Pika Warp appliance. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12[WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timerMartyn Welch
GE Fanuc SBC610 Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310, SBC610 and PPC9A Single Board Computers. This patch adds support for the watchdog timer found in one of the devices FPGAs. There are two identical watchdog timers at different offsets in the above mentioned boards, this driver is capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-12-31[WATCHDOG] Add support for the WM8350 watchdogMark Brown
This driver implements support for the watchdog functionality provided by the Wolfson Microelectronics WM8350, a multi-function audio and power management subsystem intended for use in embedded systems. It is based on a driver originally written by Graeme Gregory, though it has been extensively modified since then. Use of a GPIO to kick the watchdog is not yet supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-12-31[WATCHDOG] Add SMSC SCH311x Watchdog Timer.Wim Van Sebroeck
Add a watchdog driver for the hardware watchdog timer on the SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset. Tested-by: Marco Chiappero <marco@absence.it> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] orion5x_wdt.c: add spinlocking [WATCHDOG] Orion: add hardware watchdog support [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c [WATCHDOG] omap_wdt.c: another ioremap() fix [WATCHDOG] omap_wdt.c: sync linux-omap changes [WATCHDOG] Add AT91SAM9X watchdog [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
2008-10-10[WATCHDOG] Orion: add hardware watchdog supportSylver Bruneau
This patch allows the use of the hardware watchdog in the Marvell Orion series of ARM SoCs. Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] Add AT91SAM9X watchdogRenaud CERRATO
Add a driver for the watchdog timer embedded into AT91SAM9X chips. Signed-off-by: Renaud Cerrato <r.cerrato@til-technologies.fr> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] Add driver for winbond w83697ug/uf watchdog featureFlemming Frandsen
Adapted the w83627hf_wdt.c driver to work with the w83697ug/uf chip, found on MSI Fuzzy CX700 boards. The method used is taken directly from the winbond datasheet and surprisingly it differs slightly from all the other winbond watchdogs. So far it has only been tested on the CX700 board that I have, but it seems to work nicely. Signed-off-by: Flemming Frandsen <ff@nrvissing.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10[WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/KOliver Schuster
Add it87xx watchdog driver IT8716 IT8718 IT8726 IT8712-J IT8712-K Signed-off-by: Oliver Schuster <olivers137@aol.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-09-16Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 Conflicts: arch/sparc64/kernel/pci_psycho.c
2008-08-29cpwatchdog: Move to drivers/watchdog/cpwd.cDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29riowatchdog: Move under drivers/watchdogDavid S. Miller
The config stuff was already in drivers/watchdog/Kconfig Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-26[WATCHDOG] Add support for the IDT RC32434 watchdogFlorian Fainelli
Add driver for the IDT RC32434 SoC built-in watchdog. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26[WATCHDOG] Add support for the built-int RDC R-321x SoC watchdogFlorian Fainelli
This patch adds support for the built-in RDC R-321x SoC watchdog. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26[WATHDOG] delete unused driver mpc8xx_wdt.cJochen Friedrich
The watchdog driver mpc8xx_wdt.c was a device interface to arch/ppc/syslib/m8xx_wdt.c for MPC8xx hardware. Now that ARCH=ppc is gone, this driver is of no more use. For ARCH=powerpc, MPC8xx hardware is supported by mpc8xxx_wdt.c. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-08-10[WATCHDOG] Fix build with CONFIG_ITCO_VENDOR_SUPPORT=nJean Delvare
The problem is that iTCO_vendor_support.ko is still being built while iTCO_vendor.h claims that its functions do not exist. The following Makefile update fixes that. It causes iTCO_vendor_support.ko to no longer be built if CONFIG_ITCO_VENDOR_SUPPORT=n. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-06[WATCHDOG] more coding style clean-up'sWim Van Sebroeck
More coding style clean-up's. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-06[WATCHDOG] mpc83xx_wdt: rename to mpc8xxx_wdtAnton Vorontsov
Rename the driver because now we support some MPC86xx processors. There are no changes to the mpc83xx_wdt.c file, yet. When possible, we do file renames and changes separately (because Linus once asked so, because it helps git to track the renamed files). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-24remove the v850 portAdrian Bunk
Trying to compile the v850 port brings many compile errors, one of them exists since at least kernel 2.6.19. There also seems to be noone willing to bring this port back into a usable state. This patch therefore removes the v850 port. If anyone ever decides to revive the v850 port the code will still be available from older kernels, and it wouldn't be impossible for the port to reenter the kernel if it would become actively maintained again. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-24Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working"Wim Van Sebroeck
After Linus fixed the inline assembly, the CFLAGS option is not needed anymore. Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-06-17[WATCHDOG] hpwdt: Add CFLAGS to get driver workingThomas Mingarelli
To get this driver working we need the CFLAGS_hpwdt.o += -O in the Makefile. Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-05-25[WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timersJordan Crouse
Add a watchdog timer based on the MFGPT timers in the CS5535/CS5536 companion chips to the AMD Geode GX and LX processors. Only caveat is that the BIOS must provide at least a one free timer, and most do not. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-02-18[WATCHDOG] HP ProLiant WatchDog driverThomas Mingarelli
Hp is providing a Hardware WatchDog Timer driver that will only work with the specific HW Timer located in the HP ProLiant iLO 2 ASIC. The iLO 2 HW Timer will generate a Non-maskable Interrupt (NMI) 9 seconds before physically resetting the server, by removing power, so that the event can be logged to the HP Integrated Management Log (IML), a Non-Volatile Random Access Memory (NVRAM). The logging of the event is performed using the HP ProLiant ROM via an Industry Standard access known as a BIOS Service Directory Entry. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-02-18[WATCHDOG] Add support for SB1 hardware watchdogAndrew Sharp
Support watchdog timers built into SiByte MIPS SoCs. Signed-off-by: Andy Sharp <andy.sharp@onstor.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-01-25[WATCHDOG] TXx9 watchdog driverAtsushi Nemoto
This is a driver for watchdog timer built into TXx9 MIPS SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-12-04[WATCHDOG] add Nano 7240 driverGilles Gigan
Adds support for the built-in watchdog on EPIC Nano 7240 boards from IEI. Tested on Nano-7240RS. Hardware documentation of the platform (including watchdog) can be found on the IEI website: http://www.ieiworld.com Signed-off-by: Gilles Gigan <gilles.gigan@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-11-19[WATCHDOG] IT8212F watchdog driverJorge Boncompte [DTI2]
This patch adds support for the ITE Tech Inc. IT8712F EC-LPC Super I/O chipset found on many Pentium III and AMD motherboards. Developed using code from other watchdog drivers and the datasheet on ITE Tech homepage. Signed-off-by: Jorge Boncompte <jorge@dti2.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-10-23[WATCHDOG] AR7: watchdog timerMatteo Croce
Driver for the watchdog timer. Still doesn't reboots the machine on some boards, but we have improved and cleaned it Signed-off-by: Matteo Croce <technoboy85@gmail.com> Signed-off-by: Nicolas Thill <nico@openwrt.org> Signed-off-by: Enrik Berkhan <Enrik.Berkhan@akk.org> Signed-off-by: Christer Weinigel <wingel@nano-system.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-10-18mv watchdog tree under driversWim Van Sebroeck
move watchdog tree from drivers/char/watchdog to drivers/watchdog. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 23:19:12 +0000