summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-07-27Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
2012-07-27Merge branches 'audit', 'delay', 'fixes', 'misc' and 'sta2x11' into for-linusRussell King
2012-07-27ARM: Orion: DTify the watchdog timer.Andrew Lunn
Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-24Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog changes from Wim Van Sebroeck: - conversion of iTCO_wdt and orion_wdt to the generic watchdog API - uses module_platform_driver() for s3c2410_wdt - Adds support for Jetway JNF99 Motherboard - various fixes * git://www.linux-watchdog.org/linux-watchdog: watchdog: orion_wdt: Convert driver to watchdog core watchdog: s3c2410_wdt: Use module_platform_driver() watchdog: sch311x_wdt: Fix Polarity when starting watchdog Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck intransition state. watchdog: ie6xx_wdt: section mismatch in ie6xx_wdt_probe() watchdog: bcm63xx_wdt: fix driver section mismatch watchdog: iTCO_wdt.c: convert to watchdog core char/ipmi: remove local ioctl defines replaced by generic ones watchdog: xilinx: Read clock frequency directly from DT node watchdog: coh901327_wdt: use clk_prepare/unprepare watchdog: f71808e_wdt: Add support for Jetway JNF99 motherboard
2012-07-23Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Notable highlights: - iommu improvements from Anton removing the per-iommu global lock in favor of dividing the DMA space into pools, each with its own lock, and hashed on the CPU number. Along with making the locking more fine grained, this gives significant improvements in multiqueue networking scalability. - Still from Anton, we know provide a vdso based variant of getcpu which makes sched_getcpu with the appropriate glibc patch something like 18 times faster. - More anton goodness (he's been busy !) in other areas such as a faster __clear_user and copy_page on P7, various perf fixes to improve sampling quality, etc... - One more step toward removing legacy i2c interfaces by using new device-tree based probing of platform devices for the AOA audio drivers - A nice series of patches from Michael Neuling that helps avoiding confusion between register numbers and litterals in assembly code, trying to enforce the use of "%rN" register names in gas rather than plain numbers. - A pile of FSL updates - The usual bunch of small fixes, cleanups etc... You may spot a change to drivers/char/mem. The patch got no comment or ack from outside, it's a trivial patch to allow the architecture to skip creating /dev/port, which we use to disable it on ppc64 that don't have a legacy brige. On those, IO ports 0...64K are not mapped in kernel space at all, so accesses to /dev/port cause oopses (and yes, distros -still- ship userspace that bangs hard coded ports such as kbdrate)." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/mpic: Create a revmap with enough entries for IPIs and timers Remove stale .rej file powerpc/iommu: Fix iommu pool initialization powerpc/eeh: Check handle_eeh_events() return value powerpc/85xx: Add phy nodes in SGMII mode for MPC8536/44/72DS & P2020DS powerpc/e500: add paravirt QEMU platform powerpc/mpc85xx_ds: convert to unified PCI init powerpc/fsl-pci: get PCI init out of board files powerpc/85xx: Update corenet64_smp_defconfig powerpc/85xx: Update corenet32_smp_defconfig powerpc/85xx: Rename P1021RDB-PC device trees to be consistent powerpc/watchdog: move booke watchdog param related code to setup-common.c sound/aoa: Adapt to new i2c probing scheme i2c/powermac: Improve detection of devices from device-tree powerpc: Disable /dev/port interface on systems without an ISA bridge of: Improve prom_update_property() function powerpc: Add "memory" attribute for mfmsr() powerpc/ftrace: Fix assembly trampoline register usage powerpc/hw_breakpoints: Fix incorrect pointer access powerpc: Put the gpr save/restore functions in their own section ...
2012-07-23watchdog: orion_wdt: Convert driver to watchdog coreAxel Lin
Convert orion_wdt driver to use watchdog framework API. Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: s3c2410_wdt: Use module_platform_driver()Sachin Kamat
module_platform_driver() replaces module_init() and module_exit() and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: sch311x_wdt: Fix Polarity when starting watchdogWim Van Sebroeck
Some motherboards like the Advantech ARK3400 documentation use a non-inverted GPIO pin. We fix this by assuming that the BIOS will set the Polarity bit for the GPIO correctly at startup and we keep the Bit-setting intact when we start and stop the watchdog. Reported-by: Jean-François Deverge <jf.deverge@gmail.com> Signed-off-by: Dave Mueller <d.mueller@elsoft.ch> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck ↵Lokesh Vutla
intransition state. OMAP watchdog driver is adapted to runtime PM like a general device driver but it is not appropriate. It is causing couple of functional issues. 1. On OMAP4 SYSCLK can't be gated, because of issue with WDTIMER2 module, which constantly stays in "in transition" state. Value of register CM_WKUP_WDTIMER2_CLKCTRL is always 0x00010000 in this case. Issue occurs immediately after first idle, when hwmod framework tries to disable WDTIMER2 functional clock - "wd_timer2_fck". After this module falls to "in transition" state, and SYSCLK gating is blocked. 2. Due to runtime PM, watchdog timer may be completely disabled. In current code base watchdog timer is not disabled only because of issue 1. Otherwise state of WDTIMER2 module will be "Disabled", and there will be no interrupts from omap_wdt. In other words watchdog will not work at all. Watchdong is a special IP and it should not be disabled otherwise purpose of it itself is defeated. Watchdog functional clock should never be disabled. This patch updates the runtime PM handling in driver so that runtime PM is limited only during probe/shutdown and suspend/resume. The patch fixes issue 1 and 2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: ie6xx_wdt: section mismatch in ie6xx_wdt_probe()Gerard Snitselaar
ie6xx_wdt_probe() calls ie6xx_wdt_debugfs_exit() as part of it's error cleanup path, and ie6xx_wdt_debugfs_exit() is currently annotated __devexit. Signed-off-by: Gerard Snitselaar <dev@snitselaar.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: bcm63xx_wdt: fix driver section mismatchFlorian Fainelli
bcm63xx_wdt was used as a platform_driver but was not suffixed with _driver, thus causing section mismatches, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: iTCO_wdt.c: convert to watchdog coreWim Van Sebroeck
This patch converts the iTCO_wdt watchdog driver to use the generic watchdog framework. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: xilinx: Read clock frequency directly from DT nodeMichal Simek
Do not use clock-frequency property from parent node. Use it from watchdog node. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-By: Alejandro Cabrera <acabrera@udio.cujae.edu.cu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: coh901327_wdt: use clk_prepare/unprepareLinus Walleij
Make sure we prepare/unprepare the COH901327 watchdog timer as is required by the clk API especially if you use common clock. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by : Pankaj Jangra <jangra.pankaj9@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: f71808e_wdt: Add support for Jetway JNF99 motherboardJustin Wheeler
The Jetway JNF99 motherboard features a F71869 SuperIO chip, but its watchdog chipset ID appears to be 1007 (as opposed to 0814). Some testing confirmed it behaves the exact same as 0814. So add this chipset ID to the module's ID list so that the Fintek watchdog driver can correctly identify and access it. Signed-off-by: Justin Wheeler <jwheeler@datademons.com> Acked-by: Giel van Schijndel <me@mortis.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-10powerpc/watchdog: replace CONFIG_FSL_BOOKE with CONFIG_PPC_FSL_BOOK3EShaohui Xie
CONFIG_FSL_BOOKE is only defined in 32-bit, CONFIG_PPC_FSL_BOOK3E is defined in both 32-bit and 64-bit, so use CONFIG_PPC_FSL_BOOK3E to make driver work in 32-bit & 64-bit. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-09ARM: sa11x0/pxa: convert OS timer registers to IOMEMRussell King
Make the OS timer registers have IOMEM like properities so they can be passed to readl_relaxed/writel_relaxed() et.al. rather than being straight volatile dereferences. Add linux/io.h includes where required. linux/io.h includes added to arch/arm/mach-sa1100/cpu-sa1100.c, arch/arm/mach-sa1100/jornada720_ssp.c, arch/arm/mach-sa1100/leds-lart.c drivers/input/touchscreen/jornada720_ts.c, drivers/pcmcia/sa1100_shannon.c from Arnd. This fixes these warnings: arch/arm/mach-sa1100/time.c: In function 'sa1100_timer_init': arch/arm/mach-sa1100/time.c:104: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type arch/arm/mach-pxa/time.c: In function 'pxa_timer_init': arch/arm/mach-pxa/time.c:126: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-09watchdog: omap_wdt: add device tree supportXiao Jiang
Add device table for omap_wdt to support dt. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-28watchdog: core: fix WDIOC_GETSTATUS return valueWim Van Sebroeck
In commit 7a87982420e5e126bfefeb42232d1fd92052794e we added a wrapper for the WDIOC_GETSTATUS ioctl call. The code results however in a different behaviour: it returns an error if the driver doesn't support the status operation. This is not according to the API that says that when we don't support the status operation, that we just should return a 0 value. Only when the device isn't there anymore, we should return an error. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28watchdog: hpwdt: Unregister NMI events on exit.Mingarelli, Thomas
This patch is to unregister for NMI events upon exit. Also we are now making the default setting for allow_kdump enabled. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28watchdog: iTCO_wdt: add platform driver module aliasJan Beulich
The recent conversion of iTCO_wdt resulted in the driver no longer getting loaded automatically, since it no longer has a MODULE_DEVICE_TABLE() included. As the lpc_ich driver now creates a platform device, auto-loading can easily be done by having a respective module alias in place. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Aaron Sierra <asierra@xes-inc.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-20Viresh has movedViresh Kumar
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30watchdog: iTCO_wdt.c: fix printk format warningsRandy Dunlap
Fix printk format warnings: drivers/watchdog/iTCO_wdt.c:577:3: warning: format '%04llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' drivers/watchdog/iTCO_wdt.c:594:3: warning: format '%04llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' drivers/watchdog/iTCO_wdt.c:600:2: warning: format '%04llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: sp805_wdt: Add clk_{un}prepare supportViresh Kumar
clk_{un}prepare() routines are required for required on some platforms to run part of clk enable/disable() routines from contexts that can schedule. This patch adds support for these routines in sp805 driver. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: sp805_wdt: convert to watchdog coreViresh Kumar
This patch converts existing sp805 watchdog driver to use already in place common infrastructure present in watchdog core. With this lot of code goes away. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30Watchdog: DA9052/53 PMIC watchdog supportAshish Jangam
This driver adds support for the watchdog functionality provided by the Dialog Semiconductor DA9052 PMIC chip. Tested on samsung smdkv6410 and i.mx53 QS boards. Signed-off-by: Anthony Olech <Anthony.Olech@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: Add support for dynamically allocated watchdog_device structsHans de Goede
If a driver's watchdog_device struct is part of a dynamically allocated struct (which it often will be), merely locking the module is not enough, even with a drivers module locked, the driver can be unbound from the device, examples: 1) The root user can unbind it through sysfd 2) The i2c bus master driver being unloaded for an i2c watchdog I will gladly admit that these are corner cases, but we still need to handle them correctly. The fix for this consists of 2 parts: 1) Add ref / unref operations, so that the driver can refcount the struct holding the watchdog_device struct and delay freeing it until any open filehandles referring to it are closed 2) Most driver operations will do IO on the device and the driver should not do any IO on the device after it has been unbound. Rather then letting each driver deal with this internally, it is better to ensure at the watchdog core level that no operations (other then unref) will get called after the driver has called watchdog_unregister_device(). This actually is the bulk of this patch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: Add Locking supportHans de Goede
This patch fixes some potential multithreading issues, despite only allowing one process to open the /dev/watchdog device, we can still get called multiple times at the same time, since a program could be using thread, or could share the fd after a fork. This causes 2 potential problems: 1) watchdog_start / open do an unlocked test_n_set / test_n_clear, if these 2 race, the watchdog could be stopped while the active bit indicates it is running or visa versa. 2) Most watchdog_dev drivers probably assume that only one watchdog-op will get called at a time, this is not necessary true atm. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: watchdog_dev: Rewrite wrapper codeHans de Goede
Rewrite and extend the wrapper code so that we can easily introduce locking (this to be able to prevent potential multithreading issues). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: use dev_ functionsAlan Cox
While they are registered all our watchdogs now have a valid device object so we can in turn use that to report problems nicely. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: create all the proper device filesAlan Cox
Create the watchdog class and it's associated devices. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: Add multiple device supportAlan Cox
We keep the old /dev/watchdog interface file for the first watchdog via miscdev. This is basically a cut and paste of the relevant interface code from the rtc driver layer tweaked for watchdog. Revised to fix problems noted by Hans de Goede Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: watchdog_core.h: make functions externWim Van Sebroeck
Make the functions in watchdog_core.h extern like it should. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: correct the name of the watchdog_core inlude fileWim Van Sebroeck
The watchdog_core include file should have been named watchdog_core.h and not watchdog_dev.h . Correct this. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: Add watchdog_active() routineViresh Kumar
Some watchdog may need to check if watchdog is ACTIVE or not, for example in their suspend/resume hooks. This patch adds this routine and changes the core drivers to use it. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: watchdog_dev: include private header to pickup global symbol ↵H Hartley Sweeten
prototypes Include the private watchdog_dev.h header to pickup the prototypes for the watchdog_dev_register/unregister functions. This quiets the following sparse warnings: warning: symbol 'watchdog_dev_register' was not declared. Should it be static? warning: symbol 'watchdog_dev_unregister' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-29Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The whole series has been sitting in -next for quite a while with no complaints. The last change to the series was before the weekend the removal of an SPI patch which Grant - even though previously acked by himself - appeared to raise objections. So I removed it until the situation is clarified. Other than that all the patches have the acks from their respective maintainers, all MIPS and x86 defconfigs are building fine and I'm not aware of any problems introduced by this series. Among the key features for this patch series is a sizable patchset for Lantiq which among other things introduces support for Lantiq's flagship product, the FALCON SOC. It also means that the opensource developers behind this patchset have overtaken Lantiq's competing inhouse development team that was working behind closed doors. Less noteworthy the ath79 patchset which adds support for a few more chip variants, cleanups and fixes. Finally the usual dose of tweaking of generic code." Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where printk spelling fixes clashed with file move and eventual removal of the printk. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits) MIPS: lantiq: remove orphaned code MIPS: Remove all -Wall and almost all -Werror usage from arch/mips. MIPS: lantiq: implement support for FALCON soc MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc MTD: MIPS: lantiq: implement OF support watchdog: MIPS: lantiq: implement OF support and minor fixes SERIAL: MIPS: lantiq: implement OF support GPIO: MIPS: lantiq: convert gpio-stp-xway to OF GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder MIPS: pci: convert lantiq driver to OF MIPS: lantiq: convert dma to platform driver MIPS: lantiq: implement support for clkdev api MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq() OF: MIPS: lantiq: implement irq_domain support OF: MIPS: lantiq: implement OF support MIPS: lantiq: drop mips_machine support OF: PCI: const usage needed by MIPS MIPS: Cavium: Remove smp_reserve_lock. MIPS: Move cache setup to setup_arch(). ...
2012-05-29Merge tag 'mfd-3.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-23Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull first set of watchdog updates from Wim Van Sebroeck: "This pull contains: - The removal of ixp2000_wdt - The addition of ie6xx_wdt - Some documentation fixes - Small fixes and improvements (Note: Part 2 will contain generic watchdog core changes + conversion of some more drivers)" * git://www.linux-watchdog.org/linux-watchdog: Documentation/watchdog: Fix the file descriptor leak when no cmdline arg given Documentation/watchdog: close the fd when cmdline arg given Documentation/watchdog: Fix a small typo watchdog: s3c2410_wdt: Set timeout to actually achieved timeout watchdog: wm831x: Convert to gpio_request_one() watchdog: via_wdt: depends on PCI watchdog: ie6xx_wdt needs io.h watchdog: ie6xx_wdt.c: fix printk format warning watchdog: Add watchdog driver for Intel Atom E6XX watchdog: it87_wdt: Add support for IT8728F watchdog. watchdog: i6300esb: don't depend on X86 watchdog: Use module_pci_driver watchdog: sch311x_wdt.c: Remove RESGEN watchdog: s3c2410-wdt: Use of_match_ptr(). watchdog: Device tree support for pnx4008-wdt watchdog: ar7_wdt.c: use devm_request_and_ioremap watchdog: remove ixp2000 driver watchdog: sp5100_tco.c: quiet sparse noise about using plain integer was NULL pointer
2012-05-23Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH updates from Paul Mundt: - New CPUs: SH7734 (SH-4A), SH7264 and SH7269 (SH-2A) - New boards: RSK2+SH7264, RSK2+SH7269 - Unbreaking kgdb for SMP - Consolidation of _32/_64 page fault handling. - watchdog and legacy DMA chainsawing, part 1 - Conversion to evt2irq() hwirq lookup, to support relocation of vectored IRQs for irqdomains. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (98 commits) sh: intc: Kill off special reservation interface. sh: Enable PIO API for hp6xx and se770x. sh: Kill off machvec IRQ hinting. sh: dma: More legacy cpu dma chainsawing. sh: Kill off MAX_DMA_ADDRESS leftovers. sh: Tidy up some of the cpu legacy dma header mess. sh: Move sh4a dma header from cpu-sh4 to cpu-sh4a. sh64: Fix up vmalloc fault range check. Revert "sh: Ensure fixmap and store queue space can co-exist." serial: sh-sci: Fix for port types without BRI interrupts. sh: legacy PCI evt2irq migration. sh: cpu dma evt2irq migration. sh: sh7763rdp evt2irq migration. sh: sdk7780 evt2irq migration. sh: migor evt2irq migration. sh: landisk evt2irq migration. sh: kfr2r09 evt2irq migration. sh: ecovec24 evt2irq migration. sh: ap325rxa evt2irq migration. sh: urquell evt2irq migration. ...
2012-05-23watchdog: s3c2410_wdt: Set timeout to actually achieved timeoutHans de Goede
While rebasing my "watchdog_dev: Let the driver update the timeout field on set_timeout success" patch (before I noticed it was already picked up by Wim), I noticed that the s3c2410_wdt driver may not always have a 1 second resolution, this patch changes s3c2410wdt_set_heartbeat to update the timeout to the actually achieved timeout. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-23watchdog: wm831x: Convert to gpio_request_one()Mark Brown
Use the more modern API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-23watchdog: via_wdt: depends on PCIRandy Dunlap
via_wdt is a PCI driver so it should depend on PCI so that it will not cause build errors. drivers/watchdog/via_wdt.c:256:1: warning: data definition has no type or storage class drivers/watchdog/via_wdt.c:256:1: warning: type defaults to 'int' in declaration of 'module_pci_driver' drivers/watchdog/via_wdt.c:256:1: warning: parameter names (without types) in function declaration Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-23watchdog: ie6xx_wdt needs io.hRandy Dunlap
Fix build error by including <linux/io.h>: drivers/watchdog/ie6xx_wdt.c:97:2: error: implicit declaration of function 'outb' drivers/watchdog/ie6xx_wdt.c:133:2: error: implicit declaration of function 'outl' drivers/watchdog/ie6xx_wdt.c:161:2: error: implicit declaration of function 'inb' drivers/watchdog/ie6xx_wdt.c:199:3: error: implicit declaration of function 'inl' drivers/watchdog/ie6xx_wdt.c:203:3: error: implicit declaration of function 'inw' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-23watchdog: ie6xx_wdt.c: fix printk format warningRandy Dunlap
Fix printk format warning; use cast to u64 since resource_size_t can be either u32 or u64. drivers/watchdog/ie6xx_wdt.c:261:4: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-23watchdog: Add watchdog driver for Intel Atom E6XXAlexander Stein
Add driver for the watchdog timer built into the Intel Atom E6XX (TunnelCreek) processor. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-23watchdog: it87_wdt: Add support for IT8728F watchdog.Diego Elio Pettenò
This works the same way IT8721F works, but it supports WDT_PWROK (checked on the datasheet). Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-23watchdog: i6300esb: don't depend on X86Michael Olbrich
i6300esb is on of the watchdogs QEMU can emulate. It is also available when emulating ARM. The driver works without problems and is quite useful to test userspace dealing with /dev/watchdog. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>