summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2011-03-23rdc321x-southbridge: Use mfd_data instead of driver_dataAndres Salomon
Use mfd_data for passing information from mfd drivers to soc clients. The mfd_cell's driver_data field is being phased out. Clients that were using driver_data now access .mfd_data via mfd_get_data(). Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits) doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore Update cpuset info & webiste for cgroups dcdbas: force SMI to happen when expected arch/arm/Kconfig: remove one to many l's in the word. asm-generic/user.h: Fix spelling in comment drm: fix printk typo 'sracth' Remove one to many n's in a word Documentation/filesystems/romfs.txt: fixing link to genromfs drivers:scsi Change printk typo initate -> initiate serial, pch uart: Remove duplicate inclusion of linux/pci.h header fs/eventpoll.c: fix spelling mm: Fix out-of-date comments which refers non-existent functions drm: Fix printk typo 'failled' coh901318.c: Change initate to initiate. mbox-db5500.c Change initate to initiate. edac: correct i82975x error-info reported edac: correct i82975x mci initialisation edac: correct commented info fs: update comments to point correct document target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c ... Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-17Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of ↵Linus Torvalds
master.kernel.org:/home/rmk/linux-2.6-arm * 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6647/1: add Versatile Express defconfig ARM: 6644/1: mach-ux500: update the U8500 defconfig * 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6764/1: pl011: factor out FIFO to TTY code ARM: 6763/1: pl011: add optional RX DMA to PL011 v2 ARM: 6758/1: amba: support pm ops ARM: amba: make amba_driver id_table const ARM: amba: make internal ID table handling const ARM: amba: make probe() functions take const id tables ARM: 6662/1: amba: make amba_bustype non-static ARM: mmci: add dmaengine-based DMA support ARM: mmci: no need for separate host->data_xfered ARM: mmci: avoid unnecessary switch to data available PIO interrupts ARM: mmci: no need to call flush_dcache_page() with sg_miter API ARM: mmci: avoid reporting too many completed bytes on fifo overrun ALSA: AACI: make fifo variables more explanitory ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period ALSA: AACI: use snd_pcm_lib_period_bytes() ALSA: AACI: clean up AACI announcement printk ALSA: AACI: fix channel mask selection ALSA: AACI: fix number of channels for record ALSA: AACI: fix multiple IRQ claiming * 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var() VIDEO: cyberpro: remove useless function extreg pointers VIDEO: cyberpro: update handling of device structures VIDEO: cyberpro: add support for video capture I2C VIDEO: cyberpro: make 'reg_b0_lock' always present VIDEO: cyberpro: add I2C support VIDEO: cyberpro: select lowest multipler/divisor for PLL
2011-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: booke_wdt: clean up status messages watchdog: cleanup spaces before tabs watchdog: convert to DEFINE_PCI_DEVICE_TABLE watchdog: Xen watchdog driver watchdog: Intel SCU Watchdog Timer Driver for Moorestown and Medfield platforms. watchdog: jz4740_wdt - fix magic character checking watchdog: add JZ4740 watchdog driver watchdog: it87_wdt: Add support for IT8721F watchdog watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabled watchdog: hpwdt: Fix a couple of typos
2011-03-17Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest
2011-03-16Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
2011-03-15watchdog: booke_wdt: clean up status messagesTimur Tabi
Improve the status messages that are displayed during some operations of the PowerPC watchdog timer driver. When the watchdog is enabled, the timeout is displayed as a number of seconds, instead of an obscure "period". The "period" is the position of a bit in a 64-bit timer register. The higher the value, the quicker the watchdog timeout occurs. Some people chose a high "period" value for the timer and get confused as to why the board resets within a few seconds. Messages displayed during open and close are now debug messages, so that they don't clutter the console by default. Finally, printk() is replaced with the pr_xxx() equivalent. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15watchdog: cleanup spaces before tabsWim Van Sebroeck
cleanup spaces before tabs in drivers/watchdog/ Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15watchdog: convert to DEFINE_PCI_DEVICE_TABLEWim Van Sebroeck
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15watchdog: Xen watchdog driverJan Beulich
While the hypervisor change adding SCHEDOP_watchdog support included a daemon to make use of the new functionality, having a kernel driver for /dev/watchdog so that user space code doesn't need to distinguish non-Xen and Xen seems to be preferable. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15watchdog: Intel SCU Watchdog Timer Driver for Moorestown and Medfield platforms.Donald Johnson
This submission includes: - Fix to intel_scu_write() to start watchdog timer the on the first write, and refresh on subsequent writes. This enables Open, write, write, ... usage model. - Moves boot parameter checks from intel_scu_open() to intel_scu_watchdog_init(), so driver init will fail if these parameters are out of bounds. - Adds check for whether process waiting in wait_event_interruptible() received a signal while it was waiting. - Other small error handling changes. Removed the read() method for now as that wass a non-standard behaviour. Signed-off-by: Donald Johnson <donald.k.johnson@intel.com> Signed-off-by: Shuduo Sang <shuduo.sang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15watchdog: jz4740_wdt - fix magic character checkingWim Van Sebroeck
When writing to /dev/watchdog all characters should be checked for the magic character 'V'. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15watchdog: add JZ4740 watchdog driverPaul Cercueil
Adds support for the hardware watchdog found in Ingenic's jz4740 System-on-Chip. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15watchdog: it87_wdt: Add support for IT8721F watchdogHuaro Tomita
This patch adds support for a watchdog in IT8721F Super IO chip to it87_wdt driver. This new chips differ from the older IT87xxxF chips in the following ways: * WDT_GAMEPORT is not in IT8721F. * WDT_PWROK is not in IT8721F. Signed-off-by: Haruo Tomita <haruo.tomita@toshiba.co.jp> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabledTony Camuso
Builds the hpwdt driver as a module by default. If the hardware is present, the module will be loaded. Also, if hpwdt is loaded, it will decode NMIs by default. This has been made possible by he patches to hpwdt made by Dann Frazier as well as related patches submitted by Don Zickus. hpwdt only loads on hp ProLiant x86 32-bit and 64-bit platforms. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15watchdog: hpwdt: Fix a couple of typosNaga Chumbalkar
Fix some typos. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14watchdog: hpwdt: eliminate section mismatch warningAxel Lin
hpwdt_init_nmi_decoding() is called in hpwdt_init_one error handling, thus remove the __devexit annotation of hpwdt_exit_nmi_decoding(). This patch fixes below warning: WARNING: drivers/watchdog/hpwdt.o(.devinit.text+0x36f): Section mismatch in reference from the function hpwdt_init_one() to the function .devexit.text:hpwdt_exit_nmi_decoding() The function __devinit hpwdt_init_one() references a function __devexit hpwdt_exit_nmi_decoding(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of hpwdt_exit_nmi_decoding() so it may be used outside an exit section. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2Wim Van Sebroeck
outb_p(c || 0x01, WDT_EFDR); -> || should be | Reported-By: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14watchdog: sch311x_wdt: fix printk conditionDan Carpenter
"==" has higher precedence than "&". Since if (sch311x_sio_inb(sio_config_port, 0x30) & (0x01 == 0)) is always false the message is never printed. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14watchdog: sch311x_wdt: Fix LDN active checkWim Van Sebroeck
if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0) -> && should be & Reported-By: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14watchdog: cpwd: Fix buffer-overflowWim Van Sebroeck
cppcheck-1.47 reports: [drivers/watchdog/cpwd.c:650]: (error) Buffer access out-of-bounds: p.devs The source code is for (i = 0; i < 4; i++) { misc_deregister(&p->devs[i].misc); where devs is defined as WD_NUMDEVS big and WD_NUMDEVS is equal to 3. So the 4 should be a 3 or WD_NUMDEVS. Reported-By: David Binderman Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-10Watchdog: omap_wdt: add fine grain runtime-pmPaul Walmsley
The omap_wdt should only be in full active state when the registers are being accessed. Otherwise the device can be on lower power mode. This patch is based on a patch created by Kalle Jokiniemi: https://patchwork.kernel.org/patch/618231/ which is itself based on a patch created by Atal Shargorodsky: http://lkml.org/lkml/2009/3/10/266. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Tested-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Cc: Wim Van Sebroeck <wim@iguana.be> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Kevin Hilman <khilman@ti.com>
2011-03-09watchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAMEJiri Slaby
Some systems don't provide DMI_BOARD_NAME in their DMI tables. Avoid crash in such situations in fitpc2_wdt_init. The fix is to check if the dmi_get_system_info return value is NULL. The oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81253ae6>] strstr+0x26/0xa0 PGD 3966e067 PUD 39605067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map CPU 1 Modules linked in: ... Pid: 1748, comm: modprobe Not tainted 2.6.37-22-default #1 /Bochs RIP: 0010:[<ffffffff81253ae6>] [<ffffffff81253ae6>] strstr+0x26/0xa0 RSP: 0018:ffff88003ad73f18 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 00000000ffffffed RCX: 00000000ffffffff RDX: ffffffffa003f4cc RSI: ffffffffa003f4c2 RDI: 0000000000000000 ... CR2: 0000000000000000 CR3: 000000003b7ac000 CR4: 00000000000006e0 ... Process modprobe (pid: 1748, threadinfo ffff88003ad72000, task ffff88002e6365c0) Stack: ... Call Trace: [<ffffffffa004201f>] fitpc2_wdt_init+0x1f/0x13c [sbc_fitpc2_wdt] [<ffffffff810002da>] do_one_initcall+0x3a/0x170 ... Code: f3 c3 0f 1f 00 80 3e 00 53 48 89 f8 74 1b 48 89 f2 0f 1f 40 00 48 83 c2 01 80 3a 00 75 f7 49 89 d0 48 89 f8 49 29 f0 75 02 5b c3 <80> 3f 00 74 0e 0f 1f 44 00 00 48 83 c0 01 80 38 00 75 f7 49 89 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-01Remove one to many n's in a wordJustin P. Mattock
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-28dt: Eliminate of_platform_{,un}register_driverGrant Likely
Final step to eliminate of_platform_bus_type. They're all just platform drivers now. v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23ARM: amba: make probe() functions take const id tablesRussell King
Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-08m68knommu: Rename m548x_wdt.c to m54xx_wdt.cPhilippe De Muyter
All m548x files were renamed to m54xx, except m548x_wdt.c. Fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-08m68knommu: fix m548x_wdt.c compilation after headers renamingPhilippe De Muyter
m548x headers were renamed to m54xx, but m548x_wdt.c still uses the old names. Fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-26Merge branches 'sh/wdt', 'sh/pci-express-async' and 'common/serial-rework' ↵Paul Mundt
into sh-latest
2011-01-12watchdog: Add MCF548x watchdog driver.Philippe De Muyter
Add watchdog driver for MCF548x. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: add driver for the Atheros AR71XX/AR724X/AR913X SoCsGabor Juhos
This patch adds a driver for the built-in hardware watchdog device of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: Add TCO support for nVidia chipsetsMike Waychison
This driver adds support for /dev/watchdog for boards using either the MCP51 or MCP55 chipsets. These are also known as the nForce 430 and nForce 550. This driver is likely to work on other chipsets as well, though those are the only two that have been tested. Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: Add support for sp5100 chipset TCOPriyanka Gupta
This driver adds /dev/watchdog support for the AMD sp5100 aka SB7x0 chipsets. It follows the same conventions found in other /dev/watchdog drivers. Signed-off-by: Priyanka Gupta <priyankag@google.com> Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: f71808e_wdt: add F71862FG, F71869 to KconfigLutz Ballaschke
Update Kconfig with the additional Fintek hardware that we support. Signed-off-by: Lutz Ballaschke <vegan.grindcore@googlemail.com> Acked-by: Giel van Schijndel <me@mortis.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: iTCO_wdt: TCO Watchdog patch for Intel DH89xxCC PCHSeth Heasley
This patch adds the DeviceIDs for TCO Watchdog on the Intel DH89xxCC PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: iTCO_wdt: TCO Watchdog patch for Intel NM10 DeviceIDsWim Van Sebroeck
This patch adds the Intel NM10 DeviceIDs for iTCO Watchdog. Reported-by: Dan Weinlader <dan@weinlader.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: ks8695_wdt: include mach/hardware.h instead of mach/timex.h.Yegor Yefremov
ks8695_wdt needs KS8695_CLOCK_RATE, which is defined in mach/hardware.h, which is pulled in by the include of mach/timex.h, but the latter is going away, so just include mach/hardware.h directly. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: Propagate Book E WDT period changes to all coresRandy Vinson
When the watchdog period is changed, it needs to be propagated to all cores in addition to the core that performed the change. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: add CONFIG_WATCHDOG_NOWAYOUT support to PowerPC Book-E watchdog driverTimur Tabi
Normally, the watchdog is disabled when dev/watchdog is closed, but if CONFIG_WATCHDOG_NOWAYOUT is defined, then it means that the watchdog should remain enabled. So we should disable it only if CONFIG_WATCHDOG_NOWAYOUT is not defined. Also ensure that /dev/watchdog is only opened by one process at a time. That way, a second process can't accidentally disable the watchdog while the first process has it open. There shouldn't be any need for more than one process to open /dev/watchdog anyway. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: alim7101_wdt: fix compiler warning on alim7101_pci_tblNamhyung Kim
Annotate alim7101_pci_tbl as '__used' to fix following warning: CC drivers/watchdog/alim7101_wdt.o drivers/watchdog/alim7101_wdt.c:433: warning: ‘alim7101_pci_tbl’ defined but not used Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: alim1535_wdt: fix compiler warning on ali_pci_tblNamhyung Kim
Annotate ali_pci_tbl as '__used' to fix following warning: CC drivers/watchdog/alim1535_wdt.o drivers/watchdog/alim1535_wdt.c:304: warning: ‘ali_pci_tbl’ defined but not used Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: Fix reboot on W83627ehf chipset.Herman Morsink Vollenbroek
The watchdog driver for the SUPERIO chip winbond w83627ehf does not work. If you open /dev/watchdog and write a character to /dev/watchdog then the watchdog will be triggered. However the watchdog will not trigger the hardware RESET after the timeout, because the watchdog has never been enabled. Signed-off-by: Herman Morsink Vollenbroek <h.morsinkvollenbroek@home.nl> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: Add watchdog support for W83627DHG chipBenny Loenstrup Ammitzboell
The following adds watchdog support for the Winbond W83627DHG chip. I have tested it on a PQ7-M102XL (Intel Atom) board. Signed-off-by: Benny Lønstrup Ammitzbøll <benny@ammitzboell-consult.dk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: f71808e_wdt: Add Fintek F71869 watchdogMichel Arboi
Add Fintek f71869 as a supported watchdog device. Signed-off-by: Michel Arboi <michel@arboi.fr.eu.org> Acked-by: Giel van Schijndel <me@mortis.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: add f71862fg supportLutz Ballaschke
Watchdog support for Fintek F71862fg Super-I/O added. Two different hardware reset pins of the F71862fg chip can be configured by an additional module parameter. Signed-off-by: Lutz Ballaschke <vegan.grindcore@googlemail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12watchdog: clean-up f71808e_wdt.cLutz Ballaschke
Cleaned up and replaced some magic numbers by constants. Signed-off-by: Lutz Ballaschke <vegan.grindcore@googlemail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-11Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits) perf session: Fix infinite loop in __perf_session__process_events perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail perf tools: Emit clearer message for sys_perf_event_open ENOENT return perf stat: better error message for unsupported events perf sched: Fix allocation result check perf, x86: P4 PMU - Fix unflagged overflows handling dynamic debug: Fix build issue with older gcc tracing: Fix TRACE_EVENT power tracepoint creation tracing: Fix preempt count leak tracepoint: Add __rcu annotation tracing: remove duplicate null-pointer check in skb tracepoint tracing/trivial: Add missing comma in TRACE_EVENT comment tracing: Include module.h in define_trace.h x86: Save rbp in pt_regs on irq entry x86, dumpstack: Fix unused variable warning x86, NMI: Clean-up default_do_nmi() x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU x86, NMI: Remove DIE_NMI_IPI x86, NMI: Add priorities to handlers ...
2011-01-07x86: Convert some devices to use DIE_NMIUNKNOWNDon Zickus
They are a handful of places in the code that register a die_notifier as a catch all in case no claims the NMI. Unfortunately, they trigger on events like DIE_NMI and DIE_NMI_IPI, which depending on when they registered may collide with other handlers that have the ability to determine if the NMI is theirs or not. The function unknown_nmi_error() makes one last effort to walk the die_chain when no one else has claimed the NMI before spitting out messages that the NMI is unknown. This is a better spot for these devices to execute any code without colliding with the other handlers. The two drivers modified are only compiled on x86 arches I believe, so they shouldn't be affected by other arches that may not have DIE_NMIUNKNOWN defined. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Russ Anderson <rja@sgi.com> Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Cc: dann frazier <dannf@hp.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-06Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits) ARM: DMA: add support for DMA debugging ARM: PL011: add DMA burst threshold support for ST variants ARM: PL011: Add support for transmit DMA ARM: PL011: Ensure IRQs are disabled in UART interrupt handler ARM: PL011: Separate hardware FIFO size from TTY FIFO size ARM: PL011: Allow better handling of vendor data ARM: PL011: Ensure error flags are clear at startup ARM: PL011: include revision number in boot-time port printk ARM: vexpress: add sched_clock() for Versatile Express ARM i.MX53: Make MX53 EVK bootable ARM i.MX53: Some bug fix about MX53 MSL code ARM: 6607/1: sa1100: Update platform device registration ARM: 6606/1: sa1100: Fix platform device registration ARM i.MX51: rename IPU irqs ARM i.MX51: Add ipu clock support ARM: imx/mx27_3ds: Add PMIC support ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn() mx51: fix usb clock support MX51: Add support for usb host 2 arch/arm/plat-mxc/ehci.c: fix errors/typos ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-21 16:32:40 +0000