summaryrefslogtreecommitdiffstats
path: root/drivers/xen
AgeCommit message (Collapse)Author
2013-06-10xen/tmem: Don't over-write tmem_frontswap_poolid after tmem_frontswap_init ↵Konrad Rzeszutek Wilk
set it. Commit 10a7a0771399a57a297fca9615450dbb3f88081a ("xen: tmem: enable Xen tmem shim to be built/loaded as a module") allows the tmem module to be loaded any time. For this work the frontswap API had to be able to asynchronously to call tmem_frontswap_init before or after the swap image had been set. That was added in git commit 905cd0e1bf9ffe82d6906a01fd974ea0f70be97a ("mm: frontswap: lazy initialization to allow tmem backends to build/run as modules"). Which means we could do this (The common case): modprobe tmem [so calls frontswap_register_ops, no ->init] modifies tmem_frontswap_poolid = -1 swapon /dev/xvda1 [__frontswap_init, calls -> init, tmem_frontswap_poolid is < 0 so tmem hypercall done] Or the failing one: swapon /dev/xvda1 [calls __frontswap_init, sets the need_init bitmap] modprobe tmem [calls frontswap_register_ops, -->init calls, finds out tmem_frontswap_poolid is 0, does not make a hypercall. Later in the module_init, sets tmem_frontswap_poolid=-1] Which meant that in the failing case we would not call the hypercall to initialize the pool and never be able to make any frontswap backend calls. Moving the frontswap_register_ops after setting the tmem_frontswap_poolid fixes it. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Bob Liu <bob.liu@oracle.com>
2013-05-29xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvmWei Liu
Apparently we should not free page that has not been allocated. This is b/c alloc_xenballooned_pages will take care of freeing the page on its own. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-29xen-pciback: more uses of cached MSI-X capability offsetJan Beulich
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-29xenbus: save xenstore local status for later useAurelien Chartier
Save the xenstore local status computed in xenbus_init. It can then be used later to check if xenstored is running in this domain. Signed-off-by: Aurelien Chartier <aurelien.chartier@citrix.com> [Changes in v4: - Change variable name to xen_store_domain_type] Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-29xenbus: delay xenbus frontend resume if xenstored is not runningAurelien Chartier
If the xenbus frontend is located in a domain running xenstored, the device resume is hanging because it is happening before the process resume. This patch adds extra logic to the resume code to check if we are the domain running xenstored and delay the resume if needed. Signed-off-by: Aurelien Chartier <aurelien.chartier@citrix.com> [Changes in v2: - Instead of bypassing the resume, process it in a workqueue] [Changes in v3: - Add a struct work in xenbus_device to avoid dynamic allocation - Several small code fixes] [Changes in v4: - Use a dedicated workqueue] [Changes in v5: - Move create_workqueue error handling to xenbus_frontend_dev_resume] Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-28xmem/tmem: fix 'undefined variable' build error.Frederico Cadete
In the (not so useful) kernel configuration where CONFIG_SWAP is undefined and CONFIG_XEN_SELFBALLOONING is defined, xen_tmem_init would use undefined variable 'static bool frontswap'. Added #else to have #define frontswap (0) in the case where CONFIG_FRONTSWAP is not defined. Signed-off-by: Frederico Cadete <frederico@cadete.eu> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-20xen: Fixed assignment error in if statementLisa Nguyen
Fixed assignment error in if statement in balloon.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-20xen/xenbus: Fixed over 80 character limit issueLisa Nguyen
Fixed the format length of the xenbus_backend_ioctl() function to meet the 80 character limit in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-20xen/xenbus: Fixed indentation error in switch caseLisa Nguyen
Fixed the indentation error in the switch case in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off.Konrad Rzeszutek Wilk
There is no point. We would just squeeze the guest to put more and more pages in the swap disk without any purpose. The only time it makes sense to use the selfballooning and shrinking is when frontswap is being utilized. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: Remove the usage of '[no|]selfballoon' and use ↵Konrad Rzeszutek Wilk
'tmem.selfballooning' bool instead. As the 'tmem' driver is the one that actually sets whether it will use it (or not) so might as well make tmem responsible for this knob. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool ↵Konrad Rzeszutek Wilk
instead. As the 'tmem' driver is the one that actually sets whether it will use it or not so might as well make tmem responsible for this knob. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: Remove the boot options and fold them in the tmem.X parameters.Konrad Rzeszutek Wilk
If tmem is built-in or a module, the user has the option on the command line to influence it by doing: tmem.<some option> instead of having a variety of "nocleancache", and "nofrontswap". The others: "noselfballooning" and "selfballooning"; and "noselfshrink" are in a different driver xen-selfballoon.c and the patches: xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. xen/tmem: Remove the usage of 'noselfballoon','selfballoon' and use 'tmem.selfballon' bool instead. remove them. Also add documentation. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: s/disable_// and change the logic.Konrad Rzeszutek Wilk
The variety of disable_[cleancache|frontswap|selfshrinking] are making this a bit complex. Just remove the "disable_" part and change the logic around for the "nofrontswap" and "nocleancache" parameters. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: Fix compile warning.Konrad Rzeszutek Wilk
We keep on getting: drivers/xen/tmem.c:65:13: warning: ‘disable_frontswap_selfshrinking’ defined but not used [-Wunused-variable] if CONFIG_FRONTSWAP=y and # CONFIG_CLEANCACHE is not set Found by 0 day test project Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: Split out the different module/boot options.Konrad Rzeszutek Wilk
There are three options - depending on what combination of CONFIG_FRONTSWAP, CONFIG_CLEANCACHE and CONFIG_XEN_SELFBALLOONING is used. Lets split them out nicely out in three groups to make it easier to clean up. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: Move all of the boot and module parameters to the top of the file.Konrad Rzeszutek Wilk
Just code movement to see the different boot or module parameters. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: Cleanup. Remove the parts that say temporary.Konrad Rzeszutek Wilk
Frontswap is upstream, no need to having this #ifdef. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15Merge tag 'v3.10-rc1' into stable/for-linus-3.10Konrad Rzeszutek Wilk
Linux 3.10-rc1 * tag 'v3.10-rc1': (12273 commits) Linux 3.10-rc1 [SCSI] qla2xxx: Update firmware link in Kconfig file. [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type [SCSI] pm80xx: thermal, sas controller config and error handling update [SCSI] pm80xx: NCQ error handling changes [SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers [SCSI] pm80xx: Changed module name and debug messages update [SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it [SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone [SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files [SCSI] pm80xx: MSI-X implementation for using 64 interrupts [SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve [SCSI] pm80xx: Multiple inbound/outbound queue configuration [SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC [SCSI] lpfc: fix up Kconfig dependencies [SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd dm cache: set config value dm cache: move config fns dm thin: generate event when metadata threshold passed ...
2013-05-15xen/privcmd: fix condition in privcmd_close()Dan Carpenter
The parenthesis are in the wrong place so the original code is equivalent to: if (!xen_feature(XENFEAT_writable_descriptor_tables)) { ... Which obviously was not intended. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-11Merge tag 'stable/for-linus-3.10-rc0-tag-two' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - More fixes in the vCPU PVHVM hotplug path. - Add more documentation. - Fix various ARM related issues in the Xen generic drivers. - Updates in the xen-pciback driver per Bjorn's updates. - Mask the x2APIC feature for PV guests. * tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Used cached MSI-X capability offset xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen: mask x2APIC feature in PV xen: SWIOTLB is only used on x86 xen/spinlock: Fix check from greater than to be also be greater or equal to. xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info xen/vcpu: Document the xen_vcpu_info and xen_vcpu xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
2013-05-08xen: clear IRQ_NOAUTOEN and IRQ_NOREQUESTJulien Grall
Reset the IRQ_NOAUTOEN and IRQ_NOREQUEST flags that are enabled by default on ARM. If IRQ_NOAUTOEN is set, __setup_irq doesn't call irq_startup, that is responsible for calling irq_unmask at startup time. As a result event channels remain masked. The clear is already made in bind_evtchn_to_irq with commit a8636c0 but was missing on all others bind_*_to_irq. Move the clear in xen_irq_info_common_init. On x86, IRQ_NOAUTOEN and IRQ_NOREQUEST are cleared by default, so this commit doesn't impact this architecture. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-08xen: SWIOTLB is only used on x86Arnd Bergmann
Enabling SWIOTLB_XEN on ARM results in build errors because the underlying SWIOTLB is only available on X86: drivers/xen/swiotlb-xen.c: In function 'is_xen_swiotlb_buffer': drivers/xen/swiotlb-xen.c:105:2: error: implicit declaration of function 'mfn_to_local_pfn Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-30zcache/tmem: Better error checking on frontswap_register_ops return value.Konrad Rzeszutek Wilk
In the past it either used to be NULL or the "older" backend. Now we also return -Exx error codes. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30xen: tmem: enable Xen tmem shim to be built/loaded as a moduleDan Magenheimer
Allow Xen tmem shim to be built/loaded as a module. Xen self-ballooning and frontswap-selfshrinking are now also "lazily" initialized when the Xen tmem shim is loaded as a module, unless explicitly disabled by module parameters. Note runtime dependency disallows loading if cleancache/frontswap lazy initialization patches are not present. If built-in (not built as a module), the original mechanism of enabling via a kernel boot parameter is retained, but this should be considered deprecated. Note that module unload is explicitly not yet supported. [v1: Removed the [CLEANCACHE|FRONTSWAP]_HAS_LAZY_INIT ifdef] [v2: Squashed the xen/tmem: Remove the subsys call patch in] [akpm@linux-foundation.org: fix build (disable_frontswap_selfshrinking undeclared)] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30cleancache: Make cleancache_init use a pointer for the opsKonrad Rzeszutek Wilk
Instead of using a backend_registered to determine whether a backend is enabled. This allows us to remove the backend_register check and just do 'if (cleancache_ops)' [v1: Rebase on top of b97c4b430b0a (ramster->zcache move] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30frontswap: make frontswap_init use a pointer for the opsKonrad Rzeszutek Wilk
This simplifies the code in the frontswap - we can get rid of the 'backend_registered' test and instead check against frontswap_ops. [v1: Rebase on top of 703ba7fe5e0 (ramster->zcache move] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29Merge tag 'stable/for-linus-3.10-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen updates from Konrad Rzeszutek Wilk: "Features: - Populate the boot_params with EDD data. - Cleanups in the IRQ code. Bug-fixes: - CPU hotplug offline/online in PVHVM mode. - Re-upload processor PM data after ACPI S3 suspend/resume cycle." And Konrad gets a gold star for sending the pull request early when he thought he'd be away for the first week of the merge window (but because of 3.9 dragging out to -rc8 he then re-sent the reminder on the first day of the merge window anyway) * tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: resolve section mismatch warnings in xen-acpi-processor xen: Re-upload processor PM data to hypervisor after S3 resume (v2) xen/smp: Unifiy some of the PVs and PVHVM offline CPU path xen/smp/pvhvm: Don't initialize IRQ_WORKER as we are using the native one. xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM xen/spinlock: Check against default value of -1 for IRQ line. xen/time: Add default value of -1 for IRQ and check for that. xen/events: Check that IRQ value passed in is valid. xen/time: Fix kasprintf splat when allocating timer%d IRQ line. xen/smp/spinlock: Fix leakage of the spinlock interrupt line for every CPU online/offline xen/smp: Fix leakage of timer interrupt line for every CPU online/offline. xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND xen: drop tracking of IRQ vector x86/xen: populate boot_params with EDD data
2013-04-19xen: resolve section mismatch warnings in xen-acpi-processorBen Guthro
The following resolves a section mismatch warning below in xen-acpi-processor introduced by 3fac10145b766a2244422788f62dc35978613fd8 [13/13] xen: Re-upload processor PM data to hypervisor after S3 resume (v2) Warning: WARNING: drivers/xen/built-in.o(.text+0x2056a): Section mismatch in reference from the function xen_upload_processor_pm_data() to the function .init.text:read_acpi_id() The function xen_upload_processor_pm_data() references the function __init read_acpi_id(). This is often because xen_upload_processor_pm_data lacks a __init annotation or the annotation of read_acpi_id is wrong. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ben Guthro <benjamin.guthro@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-17xen: Re-upload processor PM data to hypervisor after S3 resume (v2)Ben Guthro
Upon resume, it was found that ACPI C-states were missing from non-boot CPUs. This change registers a syscore_ops handler for this case, and re-uploads the PM information to the hypervisor to properly reset the C-state on these processors. v2: v1 did not go through the check_acpi_ids() code-path, and missed some cases when xen was running with the dom0_max_vcpus= command line parameter. Signed-Off-By: Ben Guthro <benjamin.guthro@citrix.com> [v3: Ate some tabs, s/printk/pr_info/] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-16xen/events: Check that IRQ value passed in is valid.Konrad Rzeszutek Wilk
We naively assume that the IRQ value passed in is correct. If it is not, then any dereference operation for the 'info' structure will result in crash - so might as well guard ourselves and sprinkle copious amounts of WARN_ON. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-16xen: drop tracking of IRQ vectorJan Beulich
For quite a few Xen versions, this wasn't the IRQ vector anymore anyway, and it is not being used by the kernel for anything. Hence drop the field from struct irq_info, and respective function parameters. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-10Merge tag 'stable/for-linus-3.9-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: "Two bug-fixes: - Early bootup issue found on DL380 machines - Fix for the timer interrupt not being processed right awaym leading to quite delayed time skew on certain workloads" * tag 'stable/for-linus-3.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/mmu: On early bootup, flush the TLB when changing RO->RW bits Xen provided pagetables. xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.
2013-04-02xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.Keir Fraser
This avoids any other hardirq handler seeing a very stale jiffies value immediately after wakeup from a long idle period. The one observable symptom of this was a USB keyboard, with software keyboard repeat, which would always repeat a key immediately that it was pressed. This is due to the key press waking the guest, the key handler immediately runs, sees an old jiffies value, and then that jiffies value significantly updated, before the key is unpressed. Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Keir Fraser <keir.fraser@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-27Merge tag 'stable/for-linus-3.9-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: "This is mostly just the last stragglers of the regression bugs that this merge window had. There are also two bug-fixes: one that adds an extra layer of security, and a regression fix for a change that was added in v3.7 (the v1 was faulty, the v2 works). - Regression fixes for C-and-P states not being parsed properly. - Fix possible security issue with guests triggering DoS via non-assigned MSI-Xs. - Fix regression (introduced in v3.7) with raising an event (v2). - Fix hastily introduced band-aid during c0 for the CR3 blowup." * tag 'stable/for-linus-3.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/events: avoid race with raising an event in unmask_evtchn() xen/mmu: Move the setting of pvops.write_cr3 to later phase in bootup. xen/acpi-stub: Disable it b/c the acpi_processor_add is no longer called. xen-pciback: notify hypervisor about devices intended to be assigned to guests xen/acpi-processor: Don't dereference struct acpi_processor on all CPUs.
2013-03-27xen/events: avoid race with raising an event in unmask_evtchn()David Vrabel
In unmask_evtchn(), when the mask bit is cleared after testing for pending and the event becomes pending between the test and clear, then the upcall will not become pending and the event may be lost or delayed. Avoid this by always clearing the mask bit before checking for pending. If a hypercall is needed, remask the event as EVTCHNOP_unmask will only retrigger pending events if they were masked. This fixes a regression introduced in 3.7 by b5e579232d635b79a3da052964cb357ccda8d9ea (xen/events: fix unmask_evtchn for PV on HVM guests) which reordered the clear mask and check pending operations. Changes in v2: - set mask before hypercall. Cc: stable@vger.kernel.org Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-27xen/acpi-stub: Disable it b/c the acpi_processor_add is no longer called.Konrad Rzeszutek Wilk
With the Xen ACPI stub code (CONFIG_XEN_STUB=y) enabled, the power C and P states are no longer uploaded to the hypervisor. The reason is that the Xen CPU hotplug code: xen-acpi-cpuhotplug.c and the xen-acpi-stub.c register themselves as the "processor" type object. That means the generic processor (processor_driver.c) stops working and it does not call (acpi_processor_add) which populates the per_cpu(processors, pr->id) = pr; structure. The 'pr' is gathered from the acpi_processor_get_info function which does the job of finding the C-states and figuring out PBLK address. The 'processors->pr' is then later used by xen-acpi-processor.c (the one that uploads C and P states to the hypervisor). Since it is NULL, we end skip the gathering of _PSD, _PSS, _PCT, etc and never upload the power management data. The end result is that enabling the CONFIG_XEN_STUB in the build means that xen-acpi-processor is not working anymore. This temporary patch fixes it by marking the XEN_STUB driver as BROKEN until this can be properly fixed. CC: jinsong.liu@intel.com Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-22xen-pciback: notify hypervisor about devices intended to be assigned to guestsJan Beulich
For MSI-X capable devices the hypervisor wants to write protect the MSI-X table and PBA, yet it can't assume that resources have been assigned to their final values at device enumeration time. Thus have pciback do that notification, as having the device controlled by it is a prerequisite to assigning the device to guests anyway. This is the kernel part of hypervisor side commit 4245d33 ("x86/MSI: add mechanism to fully protect MSI-X table from PV guest accesses") on the master branch of git://xenbits.xen.org/xen.git. CC: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-22xen/acpi-processor: Don't dereference struct acpi_processor on all CPUs.Konrad Rzeszutek Wilk
With git commit c705c78c0d0835a4aa5d0d9a3422e3218462030c "acpi: Export the acpi_processor_get_performance_info" we are now using a different mechanism to access the P-states. The acpi_processor per-cpu structure is set and filtered by the core ACPI code which shrinks the per_cpu contents to only online CPUs. In the past we would call acpi_processor_register_performance() which would have not tried to dereference offline cpus. With the new patch and the fact that the loop we take is for for_all_possible_cpus we end up crashing on some machines. We could modify the loop to be for online_cpus - but all the other loops in the code use possible_cpus (for a good reason) - so lets leave it as so and just check if per_cpu(processor) is NULL. With this patch we will bypass the !online but possible CPUs. This fixes: IP: [<ffffffffa00d13b5>] xen_acpi_processor_init+0x1b6/0xe01 [xen_acpi_processor] PGD 4126e6067 PUD 4126e3067 PMD 0 Oops: 0002 [#1] SMP Pid: 432, comm: modprobe Not tainted 3.9.0-rc3+ #28 To be filled by O.E.M. To be filled by O.E.M./M5A97 RIP: e030:[<ffffffffa00d13b5>] [<ffffffffa00d13b5>] xen_acpi_processor_init+0x1b6/0xe01 [xen_acpi_processor] RSP: e02b:ffff88040c8a3ce8 EFLAGS: 00010282 .. snip.. Call Trace: [<ffffffffa00d11ff>] ? read_acpi_id+0x12b/0x12b [xen_acpi_processor] [<ffffffff8100215a>] do_one_initcall+0x12a/0x180 [<ffffffff810c42c3>] load_module+0x1cd3/0x2870 [<ffffffff81319b70>] ? ddebug_proc_open+0xc0/0xc0 [<ffffffff810c4f37>] sys_init_module+0xd7/0x120 [<ffffffff8166ce19>] system_call_fastpath+0x16/0x1b on some machines. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-12Merge tag 'stable/for-linus-3.9-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - Compile warnings and errors (one on x86, two on ARM) - WARNING in xen-pciback - Use the acpi_processor_get_performance_info instead of the 'register' version * tag 'stable/for-linus-3.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/acpi: remove redundant acpi/acpi_drivers.h include xen: arm: mandate EABI and use generic atomic operations. acpi: Export the acpi_processor_get_performance_info xen/pciback: Don't disable a PCI device that is already disabled.
2013-03-11xen/acpi: remove redundant acpi/acpi_drivers.h includeLiu Jinsong
It's redundant since linux/acpi.h has include it when CONFIG_ACPI enabled, and when CONFIG_ACPI disabled it will trigger compiling warning In file included from drivers/xen/xen-stub.c:28:0: include/acpi/acpi_drivers.h:103:31: warning: 'struct acpi_device' declared inside parameter list [enabled by default] include/acpi/acpi_drivers.h:103:31: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] include/acpi/acpi_drivers.h:107:43: warning: 'struct acpi_pci_root' declared inside parameter list [enabled by default] Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-06acpi: Export the acpi_processor_get_performance_infoKonrad Rzeszutek Wilk
The git commit d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 (cpufreq: handle cpufreq being disabled for all exported function) tightens the cpufreq API by returning errors when disable_cpufreq() had been called. The problem we are hitting is that the module xen-acpi-processor which uses the ACPI's functions: acpi_processor_register_performance, acpi_processor_preregister_performance, and acpi_processor_notify_smm fails at acpi_processor_register_performance with -22. Note that earlier during bootup in arch/x86/xen/setup.c there is also an call to cpufreq's API: disable_cpufreq(). This is b/c we want the Linux kernel to parse the ACPI data, but leave the cpufreq decisions to the hypervisor. In v3.9 all the checks that d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 added are now hit and the calls to cpufreq_register_notifier will now fail. This means that acpi_processor_ppc_init ends up printing: "Warning: Processor Platform Limit not supported" and the acpi_processor_ppc_status is not set. The repercussions of that is that the call to acpi_processor_register_performance fails right away at: if (!(acpi_processor_ppc_status & PPC_REGISTERED)) and we don't progress any further on parsing and extracting the _P* objects. The only reason the Xen code called that function was b/c it was exported and the only way to gather the P-states. But we can also just make acpi_processor_get_performance_info be exported and not use acpi_processor_register_performance. This patch does so. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-06xen/pciback: Don't disable a PCI device that is already disabled.Konrad Rzeszutek Wilk
While shuting down a HVM guest with pci devices passed through we get this: pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100002) ------------[ cut here ]------------ WARNING: at drivers/pci/pci.c:1397 pci_disable_device+0x88/0xa0() Hardware name: MS-7640 Device pciback disabling already-disabled device Modules linked in: Pid: 53, comm: xenwatch Not tainted 3.9.0-rc1-20130304a+ #1 Call Trace: [<ffffffff8106994a>] warn_slowpath_common+0x7a/0xc0 [<ffffffff81069a31>] warn_slowpath_fmt+0x41/0x50 [<ffffffff813cf288>] pci_disable_device+0x88/0xa0 [<ffffffff814554a7>] xen_pcibk_reset_device+0x37/0xd0 [<ffffffff81454b6f>] ? pcistub_put_pci_dev+0x6f/0x120 [<ffffffff81454b8d>] pcistub_put_pci_dev+0x8d/0x120 [<ffffffff814582a9>] __xen_pcibk_release_devices+0x59/0xa0 This fixes the bug. CC: stable@vger.kernel.org Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-03fs: Limit sys_mount to only request filesystem modules.Eric W. Biederman
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03Merge tag 'stable/for-linus-3.9-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - Update the Xen ACPI memory and CPU hotplug locking mechanism. - Fix PAT issues wherein various applications would not start - Fix handling of multiple MSI as AHCI now does it. - Fix ARM compile failures. * tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus: fix compile failure on ARM with Xen enabled xen/pci: We don't do multiple MSI's. xen/pat: Disable PAT using pat_enabled value. xen/acpi: xen cpu hotplug minor updates xen/acpi: xen memory hotplug minor updates
2013-03-01xenbus: fix compile failure on ARM with Xen enabledSteven Noonan
Adding an include of linux/mm.h resolves this: drivers/xen/xenbus/xenbus_client.c: In function ‘xenbus_map_ring_valloc_hvm’: drivers/xen/xenbus/xenbus_client.c:532:66: error: implicit declaration of function ‘page_to_section’ [-Werror=implicit-function-declaration] CC: stable@vger.kernel.org Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-25xen/acpi: xen cpu hotplug minor updatesLiu Jinsong
Recently at native Rafael did some cleanup for acpi, say, drop acpi_bus_add, remove unnecessary argument of acpi_bus_scan, and run acpi_bus_scan under acpi_scan_lock. This patch does similar cleanup for xen cpu hotplug, removing redundant logic, and adding lock. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-25xen/acpi: xen memory hotplug minor updatesLiu Jinsong
Dan Carpenter found current xen memory hotplug logic has potential issue: at func acpi_memory_get_device() *mem_device = acpi_driver_data(device); while the device may be NULL and then dereference. At native side, Rafael recently updated acpi_memory_get_device(), dropping acpi_bus_add, adding lock, and avoiding above issue. This patch updates xen memory hotplug logic accordingly, removing redundant logic, adding lock, and avoiding dereference. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-24Merge tag 'stable/for-linus-3.9-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen update from Konrad Rzeszutek Wilk: "This has two new ACPI drivers for Xen - a physical CPU offline/online and a memory hotplug. The way this works is that ACPI kicks the drivers and they make the appropiate hypercall to the hypervisor to tell it that there is a new CPU or memory. There also some changes to the Xen ARM ABIs and couple of fixes. One particularly nasty bug in the Xen PV spinlock code was fixed by Stefan Bader - and has been there since the 2.6.32! Features: - Xen ACPI memory and CPU hotplug drivers - allowing Xen hypervisor to be aware of new CPU and new DIMMs - Cleanups Bug-fixes: - Fixes a long-standing bug in the PV spinlock wherein we did not kick VCPUs that were in a tight loop. - Fixes in the error paths for the event channel machinery" Fix up a few semantic conflicts with the ACPI interface changes in drivers/xen/xen-acpi-{cpu,mem}hotplug.c. * tag 'stable/for-linus-3.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: event channel arrays are xen_ulong_t and not unsigned long xen: Send spinlock IPI to all waiters xen: introduce xen_remap, use it instead of ioremap xen: close evtchn port if binding to irq fails xen-evtchn: correct comment and error output xen/tmem: Add missing %s in the printk statement. xen/acpi: move xen_acpi_get_pxm under CONFIG_XEN_DOM0 xen/acpi: ACPI cpu hotplug xen/acpi: Move xen_acpi_get_pxm to Xen's acpi.h xen/stub: driver for CPU hotplug xen/acpi: ACPI memory hotplug xen/stub: driver for memory hotplug xen: implement updated XENMEM_add_to_physmap_range ABI xen/smp: Move the common CPU init code a bit to prep for PVH patch.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-15 17:19:08 +0000