summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2005-04-25[TG3]: Fix tg3_restart_ints()Michael Chan
tg3_restart_ints() is called to re-enable interrupts after tg3_poll() has finished all the work. It calls tg3_cond_int() to force an interrupt if the status block updated bit is set. The updated bit will be set if there is a new status block update sometime during tg3_poll() and it can be very often. The worst part is that even if all the work has been processed, the updated bit remains set and an interrupt will be forced unnecessarily. The fix is to call tg3_has_work() instead to determine if new work is posted before forcing an interrupt. The way to force an interrupt is also changed to use "coalesce_now" instead of "SETINT". The former is generally a safer way to force the interrupt. Also deleted the first parameter to tg3_has_work() which is unused. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-25[TG3]: Refresh hw index in tg3_rx()Michael Chan
This patch refreshes the hw rx producer in tg3_rx() so that additional work posted by the hardware can be processed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-25[TG3]: Fix bug in tg3_rx()Michael Chan
This patch fixes a bug that causes tg3_has_work() to always return 1. rx work is determined by comparing tp->rx_rcb_ptr with the current hw producer index. The hw producer index is modulo the ring size, but tp- >rx_rcb_ptr is a free running counter that goes up beyond the ring size. After the ring wraps around once, tg3_has_work() will always return 1. The fix is to always do modulo arithmetic on tp->rx_rcb_ptr. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-25[PATCH] ppc iomem annotations: mv643xx_ethAl Viro
void * __iomem replaced with intended void __iomem *. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-25Automatic merge of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
2005-04-24[SPARC]: Enable sun logo on sparc32Bob Breuer
This enables the sun linux logo to be selected on sparc32. Signed-off-by: Bob Breuer <breuerr@mc.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24[SPARC]: TCX Framebuffer fixesTom 'spot' Callaway
Using the same logic as the other framebuffer fixes committed in 2.6.11, this is a set of fixes to make TCX functional on the console again. Adds the tcx_pan_display function, sets the all->info.var.{red,green,blue}.length values to 8, and runs fb_set_cmap. Also looks for the correct SUNW,tcx prom value. This patch just slipped through the cracks. Originally by: Georg Chini <georg.chini@triaton-webhosting.com> Signed-off-by: Tom 'spot' Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24[SPARC]: module version cleanupsTom 'spot' Callaway
Minor cleanups for sparc specific drivers (sunbmac, sunqe, sunlance, sunhme, esp) so that they have a full module version definition that is consistent with other upstream drivers. Signed-off-by: Tom 'spot' Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24[TG3]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24[ATM]: ENI155P error handling fixAndrew Morton
From: Panagiotis Issaris <takis@lumumba.luc.ac.be> In the ENI155P device driver in six possible failure cases the requested irq is not being released. In three of the above possible failure cases additionally there seems to be a memory leak. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24[SLIP]: Remove redundant NULL pointer checks prior to kfreeJesper Juhl
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24[ATM]: [fore200e] pci doesn't use global board list; use pci_register_driver()chas williams
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24[ATM]: [he] Use the DMA_32BIT_MASK constant from dma-mapping.hchas williams
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24[AX25] Introduce ax25_type_transArnaldo Carvalho de Melo
Replacing the open coded equivalents and making ax25 look more like a linux network protocol, i.e. more similar to inet. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24[PATCH] mostek bogus sparse annotations fixedAl Viro
void * __iomem foo is not a pointer to iomem - it's an iomem variable containing void *. A pile of such guys in arch/sparc64/kernel/time.c, drivers/sbus/char/rtc.c and include/asm-sparc64/mostek.h turned into intended void __iomem *. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-24[PATCH] missing include in mthcaAl Viro
Missing include - usual portability problems... Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-24[PATCH] broken dependency for floppy on ARMAl Viro
(!ARCH_S390 && !M68K && !IA64 && !UML) is obviously always true on ARM. Intended behaviour for ARM is "absent unless we are on RiscPC or EBSA285". So what we want is added && !ARM in the first term - without it the last part (|| ARCH_RPC || ARCH_EBSA285, that is) doesn't do anything. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-24[PATCH] missing include in hisaxAl Viro
Missing include, breaks at least on arm. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-24[PATCH] broken dependency for I2C_MPCAl Viro
All boards dealt with by I2C_MPC are 32bit. Moreover, driver simply won't build on ppc64 - it uses ppc32-only types all over the place. Dependency fixed - it's PPC32, not PPC. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-24[PATCH] SCSI GFP fixesAl Viro
Somebody forgot that | has higher priority than ?:. As the result, allocation is done with bogus flags - instead of GFP_ATOMIC + possibly GFP_DMA we always get GFP_DMA and no GFP_ATOMIC. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-22Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.gitLinus Torvalds
2005-04-21[SPARC64]: In sunsab driver, make sure to set the uart timeout.David S. Miller
This breaks serial consoles badly. Thanks to Eric Brower for tracking down the problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[SPARC64]: In sunsu driver, make sure to fully init chip for kbd/msDavid S. Miller
We were forgetting to call sunsu_change_speed(). The reason that replugging in the mouse cable "fixes things" is that causes a BREAK interrupt which in turn caused a call to sunsu_change_speed() which would get the chip setup properly. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[SPARC]: Provide generic ioctls in Sparc RTC driver.David S. Miller
Provide support for drivers/char/rtc.c ioctls in the Mostek rtc driver as well as the Sparc specific RTCGET and RTCSET. This allows userspace to be much less messy. Currently util-linux and other spots jump through hoops trying various ioctl variants until it hits the right one whatever driver actually being used supports. Eventually all of this should move over to the genrtc.c driver, but not today... While we are here, fix up the register types for sparse. Thanks to Frans Pop for helping point out this issue. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Add msi testMichael Chan
Add MSI test for chips that support MSI. If MSI test fails, it will switch back to INTx mode and will print a message asking the user to report the failure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Add msi supportMichael Chan
Add MSI support for 5751 C0 and 5752. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Fix bug in tg3_set_eeprom()Michael Chan
Fix a bug in tg3_set_eeprom() when the length is less than 4 and the offset is not 4-byte aligned. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Add nvram lock-out support for 5752 TPMMichael Chan
Add support for the NVRAM lock-out feature for TPM in 5752. If lock-out is enabled, certain NVRAM registers cannot be written to. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Add nvram detection for 5752Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Add GPIO3 for 5752Michael Chan
Add bit definitions for the new GPIO3 in 5752. GPIO3 must be driven as output when it is unused. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Workaround 5752 A0 chip IDMichael Chan
The 5752 A0 chip ID is wrong in hardware. The simplest way to workaround it is to change it to the correct value in tp->pci_chip_rev_id. This way, it is easier to check for the ASIC_REV_5752 in the rest of the driver. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Fix tg3_set_power_state()Michael Chan
Fix tg3_set_power_state to drive GPIOs properly based on the TG3_FLAG_EEPROM_WRITE_PROTECT flag. Some delays are also added after D0 and D3 power state changes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Setup proper GPIO settingsMichael Chan
Setup proper GPIO settings in tp->grc_local_ctrl before calling tg3_set_power() state in tg3_get_invariants() and after chip reset. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Split tg3_phy_probe into 2 functionsMichael Chan
Split the 1st half of tg3_phy_probe() into tg3_get_eeprom_hw_cfg() so that the TG3_FLAG_EEPROM_WRITE_PROT can be determined before calling tg3_set_power_state() in tg3_get_invariants(). This will allow tg3_set_power_state() to drive the GPIOs correctly based on the config. information in eeprom. On the 5752, there are no pull-up resistors on the GPIO pins and it is necessary to drive the unused GPIOs as output. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: Minor 5752 fixesMichael Chan
Some minor 5752 fixes mostly for correctness and add 5752 PHY ID. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: add support for bcm5752 rev a1John W. Linville
Replace existing ASIC_REV_5752 definition with ASIC_REV_5752_A0, and add definition for ASIC_REV_5752_A1. Then, add ASIC_REV_5752_A1 to check for setting TG3_FLG2_5750_PLUS in tg3_get_invariants. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: check TG3_FLG2_5750_PLUS flag to set TG3_FLG2_5705_PLUS flagJohn W. Linville
Use check of TG3_FLG2_5750_PLUS in tg3_get_invariants to set TG3_FLG2_5705_PLUS flag. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: use TG3_FLG2_57{05,50}_PLUS flags in tg3_get_invariantsJohn W. Linville
Rewrite checks in tg3_get_invariants to use TG3_FLG2_5705_PLUS and TG3_FLG2_5750_PLUS flags. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: more use of TG3_FLG2_5705_PLUS flagJohn W. Linville
Rewrite of a couple of troublesome multi-way if statements to use TG3_FLG2_5705_PLUS flag. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: use new TG3_FLG2_5750_PLUS flagJohn W. Linville
Replace a number of two-way if statements checking for 5750, and/or 5752 to reference the newly-defined TG3_FLG2_5750_PLUS flag instead. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: define TG3_FLG2_5750_PLUS flagJohn W. Linville
Define TG3_FLG2_5750_PLUS flag and set it in tg3_get_invariants for ASIC_REV_5750 or ASIC_REV_5752. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: use TG3_FLG2_5705_PLUS instead of multi-way if'sJohn W. Linville
Replace a number of three-way if statements checking for 5705, 5750, and 5752 to reference the equivalent TG3_FLG2_5705_PLUS flag instead. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: add bcm5752 entry to pci_ids.hJohn W. Linville
Add proper entry for bcm5752 PCI ID to pci_ids.h, and use it in tg3. I did this separately in case patches like this (i.e. new PCI IDs) need to come from more "official" sources. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: add bcm5752 to tg3_pci_tblJohn W. Linville
Add hard-coded definition of bcm5752 PCI ID to tg3_pci_tbl. Next patch will change entry to use pci_ids.h-based definition. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[TG3]: add basic bcm5752 supportJohn W. Linville
Add ASIC_REV_5752 definition. Track-down all references to ASIC_REV_5750 and mirror them with references to the newly defined ASIC_REV_5752. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[PATCH] Fix tgafb.c compile failureAdrian Bunk
The untested patch below should fix this compile error. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-21[PATCH] Fix non-legacy ISO receive regressionJody McIntyre
Fix non-legacy multichannel ISO receive, broken by Parag Wardukar's allocation fix. Multichannel ISO receive still sucks; it should be possible to use both legacy and non-legacy modes at the same time, but with this patch, things are no worse than they were in 2.6.11 and allocation is still done at the correct time. Signed-off-by: Jody McIntyre <scjody@steamballoon.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-21[PATCH] ohci1394: tlabels misprinted in DBGMSGJody McIntyre
- Print the correct value in the DBGMSG in dma_rcv_tasklet(). See OHCI 1.1 section 8.7, page 103 ff. - Print tlabels as %d everywhere. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@steamballoon.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-21[PATCH] fix for ISDN ippp filteringKarsten Keil
We do not longer use DLT_LINUX_SLL for activ/pass filters but DLT_PPP_WITHDIRECTION witch need 1 as outbound flag. Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-21[PATCH] Fix aic7xxx_osm.c compile with older gcc'sJames Bottomley
My version of gcc doesn't warn about this error (declaration in the middle of a set of statements). The fix is simple (this also corrects return code; for init functions it should be zero or error).
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 00:18:57 +0000