summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2009-06-07ixgbe: Fix 82599 adapter link flickering issuesMallikarjuna R Chilakala
Fix autoneg restart issues in flow control path which might create endless link flickering due to known timing issues with 82599 adapters. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakakla@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Harden the 82599 multispeed fiber autotry mechanismPeter P Waskiewicz Jr
82599 supports multispeed fiber optical modules (10Gbps/1Gbps). Some scenarios can cause the autotry mechanism to not negotiate link properly. What needs to happen is the driver must flap the Tx laser to induce an Rx Loss of Signal on the link partner. This will restart the autotry mechanism to get link into a known state. The software definable pin (SDP) 3 on the 0x10fb NIC is wired to cause a Tx LOS event, which triggers the Rx LOS we require. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Add ethtool offline test supportPeter P Waskiewicz Jr
This patch adds support for the ethtool internal test engine. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Change the 82599 PHY DSP restart logicPeter P Waskiewicz Jr
When reprogramming the 82599 analog PHY to either SFI optical or Direct Attach Twinax, we need to restart the DSP in the PHY. The current method can cause contention with our FW which is managing PHY state, and will cause unexpected link flaps. This patch fixes the DSP restart by issuing an AN_RESTART in the MAC, which will properly propagate the DSP restart to the PHY. This ensures we don't collide with the FW. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Enable ACPI WoL capabilities for 82599Peter P Waskiewicz Jr
The 82599 KX4 device defaults to legacy power management, or APME. This puts the device into ACPI mode, which allows more robust WoL setups to work properly. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-06-07forcedeth: addition of new mcp89 device idAyaz Abdulla
This patch adds a new device id for mcp89 chipset. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07forcedeth: remove device id macrosAyaz Abdulla
This patch removes the device id macros and instead uses the constants directly. The areas in which logic expressions where using the macros now instead use feature/workaround flags. No new functionality has been introduced in this patch, only clean up of flags and macros. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-04ar9170: remove deprecated codeChristian Lamparter
This patch removes code (deprecated by "cfg80211: add rfkill support" ) main.c: In function 'ar9170_op_config': main.c:1306: warning: '__IEEE80211_CONF_CHANGE_RADIO_ENABLED' is deprecated (declared at include/net/mac80211.h:551) and a useless device state. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwlwifi: fix comment describing disable_11nReinette Chatre
Fixing a comment in the code describing this module parameter. The description printed when user runs "modinfo" is correct. Reported-by: Jiajia Zheng <jiajia.zheng@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwlwifi: add value and range define for link quality commandWey-Yi Guy
Instead of hardcoding the link quality parameters inside the functions, adding #define in iwl-commands.h to shared by different functions. Also include the valid range for number of link quality parameters. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwlagn: delay ict interrupt.Mohamed Abbas
Wait until ucode is loaded and driver receive ALIVE_REPLY then switch to ICT interrupt. This ensures we receive all interrupts indicating successful ucode load. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwl3945/iwlwifi: fix led bug when SW rfkillAbhijeet Kolekar
Patch fixes the bug at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1903 when SW rfkill is invoked by 'iwconfig txpower off', the existing connection disassociates and led off command is sent to the device which returns error as rfkill is 'true'. Patch fixes this by just avoiding sending the led off/on command when disassociated. The main purpose of the led_disassociate callback is to start or stop the blinking. There are three states in led 1) Always on when radio is on 2) Always off when radio is off 3) blink when associated and if there is some traffic. In this callback 'allow_blinking' needs to be set false when associated, as LED will be always on. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwl3945: port allow skb allocation in tasklet patchAbhijeet Kolekar
Port "iwlcore: Allow skb allocation from tasklet." to 3945 If RX queue becomes empty then we need to restock the queue from tasklet to prevent ucode from starving. A caller to iwl_rx_allocate will decide if allocated buffer should come from GFP_ATOMIC or GFP_KERNEL. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwlwifi: unify station managementTomas Winkler
This patch unifies 3945 and AGN station management It also removes useless struct iwl_station_mgmt ops and cleanups a bit the interface Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03TI DaVinci EMAC: Remove print_mac, DECLARE_MAC_BUFChaithrika U S
Use printk format specifier for MAC address. Remove DECALRE_MAC_BUF and print_mac() usage in the driver. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03tun: Only wake up writersHerbert Xu
When I added socket accounting to tun I inadvertently introduced spurious wake-up events that kills qemu performance. The problem occurs when qemu polls on the tun fd for read, and then transmits packets. For each packet transmitted, we will wake up qemu even if it only cares about read events. Now this affects all sockets, but it is only a new problem for tun. So this patch tries to fix it for tun first and we can then look at the problem in general. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03cxgb3: minor aq100x phy fixesDivy Le Ray
Use generic MDIO generic values. Based on Ben Hutchings'review comments. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03cxgb3: Update FW to 7.4.0Divy Le Ray
Update FW to 7.4. Bump up driver revision. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03cfg80211: fix Kconfig for users of cfg80211Johannes Berg
* iwm doesn't depend on cfg80211 or wireless extensions * rndis wlan selects cfg80211 - needs to depend * mac80211 selects cfg80211 - needs to depend Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath5k: disable beacon interrupt when interface is downBob Copeland
When we remove the active interface, there's no need to continue sending beacons; doing so would cause a null pointer deref in ieee80211_beacon_get(). Disable the interrupt in remove_interface and add a WARN_ON(!vif) in case there are other instances lurking. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath: make regulatory parsing more verbose on debugLuis R. Rodriguez
This should help when reviewing issues regarding regulatory domain on ath5k/ath9k/ar9170. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath9k: Fix write callback of 'debug' which configures debug maskVasanthakumar Thiagarajan
Handle error condition on copy_from_user() properly and make sure a NUL terminated char[] is sent to strict_strtoul() for proper conversion. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwm: port to new cfg80211 rfkillJohannes Berg
Which means removing all rfkill code since it only does soft-kill which cfg80211 will now handle in exactly the same way the driver did. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03rfkill: rewriteJohannes Berg
This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03libertas: improve function init/shutdown handling for SD8688Bing Zhao
This patch is to incorporate Dan Williams' comments for commit: "libertas: implement function init/shutdown commands for SD8688" 1. remove fn_init_required and fn_shutdown_required variables from lbs_private structure. If required, __lbs_cmd() will be called directly to send function init/shutdown command for SD8688 in if_sdio_probe() or if_sdio_remove() callback. 2. add global variable "user_rmmod" to distinguish between the module removal case and the card removal case. This flag will be checked in if_sdio_remove() against SD8688 card to determine whether or not the function shutdown command needs to be sent. 3. remove "card" from if_sdio_model structure as it cannot store card pointers for multiple cards. Besides, it's no longer needed to store the "card" pointer with changes #1 & #2 above. Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03wireless/p54: prepare for FIRMWARE_NAME_MAX removalSamuel Ortiz
We're going to remove the FIRMWARE_NAME_MAX definition in order to avoid any firmware name length restriction. This patch gets rid of the statically allocated p54usb firmware string, and replaces them with const char pointers. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwmc3200wifi: shrink calibration lmac nameSamuel Ortiz
iwmc3200wifi: trim down calibration firmware name The patch trims down iwmc3200wifi calibration firmware name from iwmc3200wifi-lmac-calib-sdio.bin to iwmc3200wifi-calib-sdio.bin. We can shorten the firmware name because all calibration is done by LMAC. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: cancel led worker properly on exitChristian Lamparter
"[PATCH 3/4 v2] ar9170: fix LED power state handling" revealed a bug which can cause a ugly crash. The delayed worker is canceled before the LED class functions are unregistered... So, if something manages to update the LEDs while unregister routine is running the timer could fire _after_ the module has been unloaded. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170usb: more minor fixesChristian Lamparter
This patch contains a few more mostly random fixes for the USB front-end. 1. handle irq command response, instead of printing it to the console. 2. remove fixed FIXME. (real fix: "ar9170usb: reset device on resume". ) 3. some more one-liner. - get rid of a useless "return;" - add a few branch prediction hints in hot-paths etc. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: fix lockdep warning on hibernateChristian Lamparter
This patch takes care of Johannes' deadlock report by moving the mutex_lock right after cancel_work_sync in ar9170_op_stop. Besides, the janitor does not need to hold the mutex anymore, so this extra lines can be removed as well. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: fix LED power state handlingChristian Lamparter
This patch fixes a minor visual bug in the led code, which left the LED in the wrong power state when it was toggled in a _unexpected_ way (e.g: enabling the LED twice). Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: kill duplicated HT feature flagChristian Lamparter
This patch removes a redundant flag. .cap = IEEE80211_HT_CAP_MAX_AMSDU | \ > IEEE80211_HT_CAP_SM_PS | \ < [...] \ > IEEE80211_HT_CAP_SM_PS, \ < .ampdu_factor = 3, \ Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: use bitop macros for tx filter flagsChristian Lamparter
This patch fixes a bug in configure_filter's (sub-)routines. We never really cleared the flags once we updated the hardware state, so we wasted our resources by applying already active settings. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: introduce functions for MAC programmingChristian Lamparter
This patch introduces 3 new function which are used to update the MAC state, whenever needed... e.g: after a band switch. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: 40mhz fixesChristian Lamparter
This patch replace a few constant magics which may affected the device when operating in a 40MHz channel. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: update hardware definitionsChristian Lamparter
This patch only contains a few uncritical updates for the hardware definition header. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: fix beacon plcp settingsChristian Lamparter
This patch fixes a simple copy & paste error that affected beacon transmission in 802.11a mode. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03mac80211_hwsim: remove deprecated radio_enabledJohannes Berg
This removes the use of the deprecated radio_enabled setting and code associated with that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: add AVM FRITZ devicesLuis R. Rodriguez
This adds: USB 0x057C:0x8401 AVM FRITZ!WLAN USB Stick N USB 0x057C:0x8402 AVM FRITZ!WLAN USB Stick N 2.4 These devices require the 1-stage firmware, if not present we don't continue. Cc: Peter Grabienski <Peter.Grabienski@Atheros.com> Cc: Stephen Chen <Stephen.Chen@Atheros.com> Cc: Michael Fortin <Michael.Fortin@Atheros.com> Cc: Johnny Cheng <Johnny.Cheng@Atheros.com> Cc: Yuan-Gu Wei <Yuan-Gu.Wei@atheros.com> Cc: Joerg Albert <jal2@gmx.de> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: add support for 1-stage firmwareLuis R. Rodriguez
You can get the stage 1 firmware from here: http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/ar9170.fw md5sum: 34feec4ec0eae3bb92c7c1ea2dfb4530 sha1sum: 6e5250498b815c2940d97242de31e054ae44e079 Its license: http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/LICENSE This is a new firmware, tested with WNDA3100. Cc: Peter Grabienski <Peter.Grabienski@Atheros.com> Cc: Stephen Chen <Stephen.Chen@Atheros.com> Cc: Michael Fortin <Michael.Fortin@Atheros.com> Cc: Johnny Cheng <Johnny.Cheng@Atheros.com> Cc: Yuan-Gu Wei <Yuan-Gu.Wei@atheros.com> Cc: Joerg Albert <jal2@gmx.de> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath9k: Add sanity check for beacon_int in adhoc/mesh caseJouni Malinen
It looks like mac80211 can request the driver to start beaconing with a beacon interval of zero in some cases (at least for mesh point). This does not sound correct and something may need to be fixed in mac80211. However, taken into account the unpleasantness of getting stuck in an infinite busy loop with rtnl_lock held, let's add a quick workaround in the driver to avoid the worst symptom while someone more familiar with the mesh implementation can figure out what should be done with mac80211 as far as beacon interval configuration is concerned. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath5k: remove conf->beacon_int usageBob Copeland
ieee80211_conf->beacon_int was deprecated and removed in a cleanup patch, however it was accidentally added back to ath5k in the change "ath5k: Allow user/driver to set txpower." Remove it once more, fixing the following warning: [13091.968902] WARNING: at drivers/net/wireless/ath/ath5k/base.c:2167 warn_slowpath_null+0x15/0x1a() [13091.968906] Hardware name: MacBook1,1 [13091.968909] Modules linked in: usb_storage fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_seq_dummy hid_apple arc4 ecb snd_seq_oss snd_seq_midi_event usbhid snd_seq ath5k mac80211 appletouch snd_seq_device snd_pcm_oss snd_mixer_oss sky2 snd_pcm ath processor cfg80211 snd_timer sg ohci1394 snd uhci_hcd bitrev ieee1394 joydev ehci_hcd crc32 snd_page_alloc button ac thermal battery sr_mod applesmc cdrom evdev input_polldev unix [last unloaded: microcode] [13091.968985] Pid: 2132, comm: phy0 Tainted: G W 2.6.30-rc5-wl #118 [13091.968988] Call Trace: [13091.968994] [<c0125884>] warn_slowpath_fmt+0x77/0xa6 [13091.969003] [<c03557d8>] ? _spin_unlock+0x2c/0x41 [13091.969008] [<c0355a56>] ? _spin_lock_irqsave+0x15/0x69 [13091.969012] [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969019] [<c01445bb>] ? trace_hardirqs_off+0xb/0xd [13091.969024] [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969029] [<c01445bb>] ? trace_hardirqs_off+0xb/0xd [13091.969034] [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969039] [<c01258c8>] warn_slowpath_null+0x15/0x1a [13091.969054] [<f965846d>] ath5k_beacon_update_timers+0x44/0x27f [ath5k] [13091.969059] [<c0126370>] ? vprintk+0x2dd/0x312 [13091.969063] [<c0125e50>] ? release_console_sem+0x1a6/0x1d3 [13091.969076] [<f96586c5>] ath5k_reset_tsf+0x1d/0x2c [ath5k] [13091.969095] [<f93f4426>] __ieee80211_sta_join_ibss+0x35/0x3aa [mac80211] [13091.969102] [<c0252793>] ? extract_entropy+0x47/0x8a [13091.969121] [<f93f4b21>] ieee80211_sta_find_ibss+0x2de/0x32f [mac80211] [13091.969126] [<c035422c>] ? mutex_lock_nested+0x28b/0x2a5 [13091.969145] [<f93f4b8e>] ? ieee80211_ibss_notify_scan_completed+0x1c/0x6f [mac80211] [13091.969164] [<f93f4bc9>] ieee80211_ibss_notify_scan_completed+0x57/0x6f [mac80211] [13091.969182] [<f93f26da>] ieee80211_scan_completed+0x31a/0x33f [mac80211] [13091.969201] [<f93f27ca>] ieee80211_scan_work+0xcb/0x18b [mac80211] [13091.969207] [<c0133a6a>] worker_thread+0x1b1/0x28e [13091.969212] [<c0133a25>] ? worker_thread+0x16c/0x28e [13091.969230] [<f93f26ff>] ? ieee80211_scan_work+0x0/0x18b [mac80211] [13091.969237] [<c013736e>] ? autoremove_wake_function+0x0/0x38 [13091.969242] [<c01338b9>] ? worker_thread+0x0/0x28e [13091.969246] [<c0137031>] kthread+0x4a/0x70 [13091.971460] [<c0136fe7>] ? kthread+0x0/0x70 [13091.971467] [<c0103527>] kernel_thread_helper+0x7/0x10 [13091.971470] ---[ end trace 8defaa5d15c50cef ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03wireless: libertas: fix unaligned accessesCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath9k: Add "debug" file to debugfsJeff Hansen
This patch adds the debug file to the ath9k debugfs, which lets you modify the debug_mask at runtime, without having to reload the ath9k module. Signed-off-by: Jeff Hansen <x@jeffhansen.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath9k: Combine legacy and 11n rc statisticsJeff Hansen
This patch combines the legacy and 11n rcstats into one, using the normal rate table indices instead of two separate indices for each mode. Legacy rates also get all of the PER and retry information, now, too. Signed-off-by: Jeff Hansen <x@jeffhansen.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath9k: Reset SC_OP_TSF_RESET flag after stuck beaconJeff Hansen
I have a TrendNet 652-BRP running OpenWRT + ath9k very well. The only problem is that the beacon gets stuck maybe once a day. After Vasanthakumar Thiagarajan's "ath9k: cleanup beacon parameters configuration" patch, ath9k would nearly re-configure the beacons after it detected the stuck beacon, and did a reset. But it would fail the SC_OP_TSF_RESET check in ath_beacon_config_ap. This patch gets the beacon fully reconfigured after the reset. Signed-off-by: Jeff Hansen <x@jeffhansen.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwmc3200wifi: fix printk formatRandy Dunlap
Fix printk format for size_t variable: drivers/net/wireless/iwmc3200wifi/fw.c:75: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: ilw@linux.intel.com Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwmc3200wifi: fix fragmentation threshold settingSamuel Ortiz
We were sending the fragmentation threshold value to the wrong table, causing an LMAC assert when setting it from wext. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwlwifi: avoid build warning in iwl-core.Rami Rosen
When building when CONFIG_IWLWIFI_DEBUG is not set, we get the following warning: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c: In function ‘iwl_isr’: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c:1707: warning: unused variable ‘inta_fh’ This patch avoids this warning by adding #ifdef CONFIG_IWLWIFI_DEBUG before the declaration of inta_fh in iwl_isr() in drivers/net/wireless/iwlwifi/iwl-core.c Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 18:13:13 +0000