summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2006-04-10[libata] sata_mv: fix can_queue line accidentally removed in scsi-eh patchJeff Garzik
2006-04-10[PATCH] move ->eh_strategy_handler to the transport classChristoph Hellwig
Overriding the whole EH code is a per-transport, not per-host thing. Move ->eh_strategy_handler to the transport class, same as ->eh_timed_out. Downside is that scsi_host_alloc can't check for the total lack of EH anymore, but the transition period from old EH where we needed it is long gone already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-10IPoIB: Use spin_lock_irq() instead of spin_lock_irqsave()Roland Dreier
We know ipoib_flush_paths() is called from plain process context with interrupts enabled, since it does wait_for_completion(). So there's no need to use spin_lock_irqsave() -- spin_lock_irq() is fine. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10IPoIB: Close race in ipoib_flush_paths()Eli Cohen
ib_sa_cancel_query() must be called with priv->lock held since a completion might arrive and set path->query to NULL. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10IB/mthca: Disable tuning PCI read burst sizeMichael S. Tsirkin
The PCI spec recommends against drivers playing with a device's PCI read burst size, and says that systems software should configure it. And we actually have users that report that changing it from the default set by BIOS hurts performance and/or stability for them. On the other hand, the Mellanox Programmer's Reference Manual recommends turning it up all the way to the maximum value. Some tests conducted here in the lab do not show performance improvement from this tuning, but this might be just me. As a work-around, make this tuning an option, off by default (safe value), with an eye towards removing it completely one day if no one complains. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10IPoIB: Make send and receive queue sizes tunableShirley Ma
Make IPoIB's send and receive queue sizes tunable via module parameters ("send_queue_size" and "recv_queue_size"). This allows the queue sizes to be enlarged to fix disastrously bad performance on some platforms and workloads, without bloating memory usage when large queues aren't needed. Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10IPoIB: Wait for join to finish before freeing mcast structEli Cohen
ipoib_mcast_restart_task() might free an mcast object while a join request is still outstanding, leading to an oops when the query completes. Fix this by waiting for query to complete, similar to what ipoib_stop_thread() is doing. The wait for mcast completion code is consolidated in wait_for_mcast_join(). Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10IB: simplify static rate encodingJack Morgenstein
Push translation of static rate to HCA format into low-level drivers, where it belongs. For static rate encoding, use encoding of rate field from IB standard PathRecord, with addition of value 0, for backwards compatibility with current usage. The changes are: - Add enum ib_rate to midlayer includes. - Get rid of static rate translation in IPoIB; just use static rate directly from Path and MulticastGroup records. - Update mthca driver to translate absolute static rate into the format used by hardware. This also fixes mthca's static rate handling for HCAs that are capable of 4X DDR. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-09[IPV6]: Unexport secure_ipv6_port_ephemeralAdrian Bunk
This patch removes the unused EXPORT_SYMBOL(secure_ipv6_port_ephemeral). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09[TG3]: Speed up SRAM access (2nd version)Michael Chan
Speed up SRAM read and write functions if possible by using MMIO instead of config. cycles. With this change, the post reset signature done at the end of D3 power change must now be moved before the D3 power change. IBM reported a problem on powerpc blades during ethtool self test that was caused by the memory test taking excessively long. Config. cycles are very slow on powerpc and the memory test can take more than 10 seconds to complete using config. cycles. David Miller informed me that an earlier version of the patch caused problems on sparc64 systems with built-in tg3 chips. This version fixes the problem by excluding all SUN built-in tg3 chips from doing MMIO SRAM access. TG3_FLAG_EEPROM_WRITE_PROT is also set unconditionally when TG3_FLG2_SUN_570X is set. This should be sane as all SUN chips are built-in and do not require Vaux switching. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09[TG3]: Kill some less useful flagsMichael Chan
Kill the TG3_FLAG_NO_{TX|RX}_PSEUDO_CSUM flags because they are not very useful. This will free up some bits for new flags. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09[IRDA]: Support for Sigmatel STIR421x chipSamuel Ortiz
This patch enables support for the Sigmatel's STIR421x IrDA chip. Once patched with Sigmatel's firmware, this chip "almost" follows the USB-IrDA spec. Thus this patch is against irda-usb.[ch]. The code has been tested by Nick Fedchik on an STIR4210 chipset based dongle. Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09[IRDA]: smcinit merged into smsc-ircc driverLinus Walleij
This patch integrates the smcinit code into the smsc-ircc driver. Some laptops have their smsc-ircc chip not properly configured by the BIOS and needs some preconfiguration. Currently, this can be done from userspace with smcinit, a utility that comes with the irda-utils package. It messes with ioports and PCI settings, from userspace. Now with this patch, if we happen to be on one of the known to be faulty laptops, we preconfigure the chip from the driver. Patch from Linus Walleij <triad@df.lth.se> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09[TG3]: Fix a memory leak.Adrian Bunk
This patch fixes a memory leak (buf wasn't freed) spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09[NET] netconsole: set .name in struct consoleRandy Dunlap
Set .name in netconsole's struct console to identify the struct's owner. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09[PATCH] x86_64: Support memory hotadd without sparsememAndi Kleen
Memory hotadd doesn't need SPARSEMEM, but can be handled by just preallocating mem_maps. This only needs some untangling of ifdefs to enable the necessary code even without SPARSEMEM. Originally from Keith Mannthey, hacked by AK. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-07drm: deline a few large inlines in DRM codeDave Airlie
This patch moves a few large functions from drm_memory.h to drm_memory.c, with the following effect: text data bss dec hex filename 46305 1304 20 47629 ba0d new/drm.ko 46367 1304 20 47691 ba4b org/drm.ko 12969 1372 0 14341 3805 new/i810.ko 14712 1372 0 16084 3ed4 org/i810.ko 16447 1364 0 17811 4593 new/i830.ko 18198 1364 0 19562 4c6a org/i830.ko 11875 1324 0 13199 338f new/i915.ko 13025 1324 0 14349 380d org/i915.ko 23936 29288 0 53224 cfe8 new/mga.ko 27280 29288 0 56568 dcf8 org/mga.ko Please apply. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-05drm: remove master setting from add/remove contextDave Airlie
Clients can do this in the miniglx setups. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-05drm: drm_pci needs dma-mapping.hDave Airlie
On alpha: WARNING: "dma_free_coherent" [drivers/char/drm/drm.ko] undefined! WARNING: "dma_alloc_coherent" [drivers/char/drm/drm.ko] undefined! Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-05[PATCH] drm: Fix issue reported by Coverity in drivers/char/drm/via_irq.cDave Airlie
This patch tries to fix an issue reported in drivers/char/drm/via_irq.c by Coverity, please review and apply if correct. Error reported: CID: 3444 Checker: REVERSE_INULL (help) File: /export2/p4-coverity/mc2/linux26/drivers/char/drm/via_irq.c Function: via_driver_irq_wait Description: Pointer "dev_priv" dereferenced before NULL check Patch Description: Move de-referencing dev_priv to after the NULL check. Signed-off-by: Jayachandran C. <c.jayachandran at gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-05Input: wistron - add support for Fujitsu N3510John Reed Riley
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-05Input: wistron - add signature for Amilo M7400Stefan Rompf
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-04IPoIB: Consolidate private neighbour data handlingMichael S. Tsirkin
Consolidate IPoIB's private neighbour data handling into ipoib_neigh_alloc() and ipoib_neigh_free(). This will make it easier to keep track of the neighbour structures that IPoIB is handling, and is a nice cleanup of the code: add/remove: 2/1 grow/shrink: 1/8 up/down: 100/-178 (-78) function old new delta ipoib_neigh_alloc - 61 +61 ipoib_neigh_free - 36 +36 ipoib_mcast_join_finish 1288 1291 +3 path_rec_completion 575 573 -2 ipoib_mcast_join_task 664 660 -4 ipoib_neigh_destructor 101 92 -9 ipoib_neigh_setup_dev 14 3 -11 ipoib_neigh_setup 17 - -17 path_free 238 215 -23 ipoib_mcast_free 329 306 -23 ipoib_mcast_send 718 684 -34 neigh_add_path 705 650 -55 Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-04kbuild: use relative path to -ISam Ravnborg
Using a relative path has the advantage that when the kernel source tree is moved the relevant .o files will not be rebuild just because the path to the kernel src has changed. This also got rid of a user of TOPDIR - which has been deprecated for a long time now. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-04-04kbuild: fix unneeded rebuilds in drivers/net/chelsio after moving source treeCarl-Daniel Hailfinger
This fixes some uneeded rebuilds under drivers/net/chelsio after moving the source tree. The makefiles used $(TOPDIR) for include paths, which is unnecessary. Changed to use relative paths. Compile tested, produces byte-identical code to the previous makefiles. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-04-04kbuild: fix unneeded rebuilds in drivers/media/video after moving source treeCarl-Daniel Hailfinger
This fixes some uneeded rebuilds under drivers/media/video after moving the source tree. The makefiles used $(src) and $(srctree) for include paths, which is unnecessary. Changed to use relative paths. Compile tested, produces byte-identical code to the previous makefiles. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-04-03IB/srp: Fix memory leak in options parsingRoland Dreier
Fix memory leak if parsing destination GID fails. Coverity bug 1042 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-03[CPUFREQ] Update LART site URLErik Mouw
Update LART site URL. The LART website moved to http://www.lartmaker.nl/. This patch updates the URL in CpuFreq specific files. Signed-off-by: Erik Mouw <erik@bitwizard.nl> Signed-off-by: Dave Jones <davej@redhat.com>
2006-04-02IB/mthca: Always build debugging code unless CONFIG_EMBEDDED=yRoland Dreier
Change the mthca debugging trace output code so that it can enabled and disabled at runtime with the debug_level module parameter in sysfs. Also, don't allow CONFIG_INFINIBAND_MTHCA_DEBUG to be disabled unless CONFIG_EMBEDDED is selected. We want users (and especially distros) to have this turned on unless they really need to save space, because by the time we want debugging output, it's usually too late to rebuild a kernel. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-02IPoIB: Always build debugging code unless CONFIG_EMBEDDED=yRoland Dreier
Don't allow CONFIG_INFINIBAND_IPOIB_DEBUG to be disabled unless CONFIG_EMBEDDED is selected. We want users (and especially distros) to have this turned on unless they really need to save space, because by the time we want debugging output, it's usually too late to rebuild a kernel. The debugging output can be controlled at runtime via the debug_level module parameter in sysfs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-02IB/mad: fix oops in cancel_madsMichael S. Tsirkin
We have seen the following OOPs in cancel_mads, when restarting opensm multiple times: Call Trace: [<c010549b>] show_stack+0x9b/0xb0 [<c01055ec>] show_registers+0x11c/0x190 [<c01057cd>] die+0xed/0x160 [<c031b966>] do_page_fault+0x3f6/0x5d0 [<c010511f>] error_code+0x4f/0x60 [<f8ac4e38>] cancel_mads+0x128/0x150 [ib_mad] [<f8ac2811>] unregister_mad_agent+0x11/0x130 [ib_mad] [<f8ac2a12>] ib_unregister_mad_agent+0x12/0x20 [ib_mad] [<f8b10f23>] ib_umad_close+0xf3/0x130 [ib_umad] [<c0162937>] __fput+0x187/0x1c0 [<c01627a9>] fput+0x19/0x20 [<c0160f7a>] filp_close+0x3a/0x60 [<c0121ca8>] put_files_struct+0x68/0xa0 [<c0103cf7>] do_signal+0x47/0x100 [<c0103ded>] do_notify_resume+0x3d/0x40 [<c0103f9e>] work_notifysig+0x13/0x25 We traced this back to local_completions unlocking mad_agent_priv->lock while still keeping a pointer into local_list. A later call to list_del(&local->completion_list) would then corrupt the list. To fix this, remove the entry from local_list after looking it up but before releasing mad_agent_priv->lock, to prevent cancel_mads from finding and freeing it. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-02Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-mmc: [ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1 [ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)
2006-04-02[PATCH] revert incorrect mutex conversion in hdaps driverArjan van de Ven
This reverts the mutex conversion that was recently done to the hdaps driver; this coversion was buggy because the hdaps driver started using this semaphore in IRQ context, which mutexes do not allow. Easiest solution for now is to just revert the patch (the patch was part of a bigger GIT commit, 9a61bf6300533d3b64d7ff29adfec00e596de67d but this only reverts this one file) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-02Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] at91_wdt.c - Atmel AT91RM9200 watchdog driver [WATCHDOG] pcwd_usb.c: fix a NULL pointer dereference [WATCHDOG] pcwd.c sprintf/strcpy fix [WATCHDOG] pcwd.c general clean-up after patches [WATCHDOG] pcwd.c add debug info [WATCHDOG] pcwd.c pcwd_cleanup_module patch [WATCHDOG] pcwd.c firmware-info patch [WATCHDOG] pcwd.c control status patch
2006-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits) Documentation: fix minor kernel-doc warnings BUG_ON() Conversion in drivers/net/ BUG_ON() Conversion in drivers/s390/net/lcs.c BUG_ON() Conversion in mm/slab.c BUG_ON() Conversion in mm/highmem.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/ptrace.c BUG_ON() Conversion in ipc/shm.c BUG_ON() Conversion in fs/freevxfs/ BUG_ON() Conversion in fs/udf/ BUG_ON() Conversion in fs/sysv/ BUG_ON() Conversion in fs/inode.c BUG_ON() Conversion in fs/fcntl.c BUG_ON() Conversion in fs/dquot.c BUG_ON() Conversion in md/raid10.c BUG_ON() Conversion in md/raid6main.c BUG_ON() Conversion in md/raid5.c Fix minor documentation typo BFP->BPF in Documentation/networking/tuntap.txt ...
2006-04-02[PATCH] sbp2: fix spinlock recursionStefan Richter
sbp2util_mark_command_completed takes a lock which was already taken by sbp2scsi_complete_all_commands. This is a regression in Linux 2.6.15. Reported by Kristian Harms at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187394 [ More complete commentary, as response to questions by Andrew: ] > This changes the call environment for all implementations of > ->Current_done(). Are they all safe to call under this lock? Short answer: Yes, trust me. ;-) Long answer: The done() callbacks are passed on to sbp2 from the SCSI stack along with each SCSI command via the queuecommand hook. The done() callback is safe to call in atomic context. So does Documentation/scsi/scsi_mid_low_api.txt say, and many if not all SCSI low-level handlers rely on this fact. So whatever this callback does, it is "self-contained" and it won't conflict with sbp2's internal ORB list handling. In particular, it won't race with the sbp2_command_orb_lock. Moreover, sbp2 already calls the done() handler with sbp2_command_orb_lock taken in sbp2scsi_complete_all_commands(). I admit this is ultimately no proof of correctness, especially since this portion of code introduced the spinlock recursion in the first place and we didn't realize it since this code's submission before 2.6.15 until now. (I have learned a lesson from this.) I stress-tested my patch on x86 uniprocessor with a preemptible SMP kernel (alas I have no SMP machine yet) and made sure that all code paths which involve the sbp2_command_orb_lock were gone through multiple times. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-02Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (49 commits) V4L/DVB (3667b): cpia2: fix function prototype V4L/DVB (3702): Make msp3400 routing defines more consistent V4L/DVB (3700): Remove obsolete commands from tvp5150.c V4L/DVB (3697): More msp3400 and bttv fixes V4L/DVB (3696): Previous change for cx2341X boards broke the remote support V4L/DVB (3693): Fix msp3400c and bttv stereo/mono/bilingual detection/handling V4L/DVB (3692): Keep experimental SLICED_VBI defines under an #if 0 V4L/DVB (3689): Kconfig: fix VP-3054 Secondary I2C Bus build configuration menu dependencies V4L/DVB (3673): Fix budget-av CAM reset V4L/DVB (3672): Fix memory leak in dvr open V4L/DVB (3671): New module parameter 'tv_standard' (dvb-ttpci driver) V4L/DVB (3670): Fix typo in comment V4L/DVB (3669): Configurable dma buffer size for saa7146-based budget dvb cards V4L/DVB (3653h): Move usb v4l docs into Documentation/video4linux V4L/DVB (3667a): Fix SAP + stereo mode at msp3400 V4L/DVB (3666): Remove trailing newlines V4L/DVB (3665): Add new NEC uPD64031A and uPD64083 i2c drivers V4L/DVB (3663): Fix msp3400c wait time and better audio mode fallbacks V4L/DVB (3662): Don't set msp3400c-non-existent register V4L/DVB (3661): Add wm8739 stereo audio ADC i2c driver ...
2006-04-02Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: kbuild infrastructure IB/ipath: infiniband verbs support IB/ipath: misc infiniband code, part 2 IB/ipath: misc infiniband code, part 1 IB/ipath: infiniband RC protocol support IB/ipath: infiniband UC and UD protocol support IB/ipath: infiniband header files IB/ipath: layering interfaces used by higher-level driver code IB/ipath: support for userspace apps using core driver IB/ipath: sysfs and ipathfs support for core driver IB/ipath: misc driver support code IB/ipath: chip initialisation code, and diag support IB/ipath: support for PCI Express devices IB/ipath: support for HyperTransport devices IB/ipath: core driver header files IB/ipath: core device driver
2006-04-02Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits) [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error) [PATCH] pcmcia: fix pcmcia_device_remove oops [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45 [PATCH] pcmcia: pseudo device handling update [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present [PATCH] pcmcia: use bitfield instead of p_state and state [PATCH] pcmcia: remove unused p_dev->state flags [PATCH] pcmcia: make pcmcia_release_{io,irq} static [PATCH] pcmcia: add return value to _config() functions [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device [PATCH] pcmcia: rename pcmcia_device.state [PATCH] pcmcia: remove unneeded Vcc pseudo setting [PATCH] pcmcia: remove export of pcmcia_release_configuration [PATCH] pcmcia: default suspend and resume handling [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq [PATCH] pcmcia: add pcmcia_disable_device [PATCH] serial_cs: add Merlin U630 IDs [PATCH] pcmcia: AT91RM9200 Compact Flash driver [PATCH] pcmcia: socket.functions starts with 1 ...
2006-04-02Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: add support for Braille devices Input: synaptics - limit rate to 40pps on Toshiba Protege M300 Input: gamecon - add SNES mouse support Input: make modalias code respect allowed buffer size Input: convert /proc handling to seq_file Input: limit attributes' output to PAGE_SIZE Input: gameport - fix memory leak Input: serio - fix memory leak Input: zaurus keyboard driver updates Input: i8042 - fix logic around pnp_register_driver() Input: ns558 - fix logic around pnp_register_driver() Input: pcspkr - separate device and driver registration Input: atkbd - allow disabling on X86_PC (if EMBEDDED) Input: atkbd - disable softrepeat for dumb keyboards Input: atkbd - fix complaints about 'releasing unknown key 0x7f' Input: HID - fix duplicate key mapping for Logitech UltraX remote Input: use kzalloc() throughout the code Input: fix input_free_device() implementation Input: initialize serio and gameport at subsystem level Input: uinput - semaphore to mutex conversion ...
2006-04-02Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [PATCH] powerpc: iSeries needs slb_initialize to be called powerpc: hook up the splice syscall [PATCH] powerpc/cell: compile fixes [PATCH] powerpc: trivial spelling fixes in fault.c [PATCH] powerpc/pseries: EEH Cleanup [PATCH] powerpc/pseries: misc lparcfg fixes [PATCH] powerpc/pseries: fix device name printing, again. [PATCH] powerpc: Extends HCALL interface for InfiniBand usage [PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS [PATCH] powerpc/pseries: print message if EEH recovery fails [PATCH] powerpc/pseries: mutex lock to serialize EEH event processing powerpc: converted embedded platforms to use new define_machine support powerpc: merge machine_check_exception between ppc32 & ppc64
2006-04-02[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1Pavel Pisa
Patch from Pavel Pisa This patch adds support of i.MX/MX1 SD/MMC controller. It has been significantly redesigned from the original Sascha Hauer's version to support scatter-gather DMA, to conform to latest Pierre Ossman's and Russell King's MMC-SD Linux 2.6.x infrastructure. The handling of all events has been moved to the softirq context and is designed with no busy-looping in mind. Unfortunately some controller bugs has to be overcome by limited looping about 2-20 usec but these are observed only for initial card recognition phase. There are still some missing/missed IRQs problems under heavy load. Help of somebody with access to the full SDHC design information is probably necessary. Regenerated against 2.6.16-git-060402 to solve clash with other patches. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)Andrew Victor
Patch from Andrew Victor This patch adds support for the MMC/SD card interface on the Atmel AT91RM9200 processor. Original driver was by Nick Randell, but a number of people have subsequently worked on it. It's currently maintained by Malcolm Noyes. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[WATCHDOG] at91_wdt.c - Atmel AT91RM9200 watchdog driverAndrew Victor
Watchdog driver for the Atmel AT91RM9200 processor. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-04-02[WATCHDOG] pcwd_usb.c: fix a NULL pointer dereferenceAdrian Bunk
The Coverity checker noted that this resulted in a NULL pointer reference if we were coming from if (usb_pcwd == NULL) { printk(KERN_ERR PFX "Out of memory\n"); goto error; } Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-04-02[WATCHDOG] pcwd.c sprintf/strcpy fixWim Van Sebroeck
change sprintf(pcwd_private.fw_ver_str, "ERROR"); to strcpy... as pointed out by Andrew Morton. Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-04-02[WATCHDOG] pcwd.c general clean-up after patchesWim Van Sebroeck
removal of includes (since we don't use kmalloc and TASK_INTERRUPTABLE anymore). Addition of missing commands. Printk that lets the user know when the module was unloaded. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-04-02[WATCHDOG] pcwd.c add debug infoWim Van Sebroeck
Add debugging info for the pcwd.c module. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-04-02[WATCHDOG] pcwd.c pcwd_cleanup_module patchWim Van Sebroeck
static void pcwd_cleanup_module doesn't need a return; Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-04-02[WATCHDOG] pcwd.c firmware-info patchWim Van Sebroeck
Get the firmware version into the private data struct of the ISA-PC watchdog card. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>