summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2005-11-01[BLOCK] Update read/write block io statistics at completion timeJens Axboe
Right now we do it at queueing time, which works alright for reads (since they are usually sync), but not for async writes since we can queue io a lot faster than we can complete it. This makes the vmstat output look extremely bursty. Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-31[PATCH] revert ide-scsi highmem cleanupAndrew Morton
Jeff Garzik <jgarzik@pobox.com> points out that this was wrong: we need to disable local interrupts while holding KM_IRQ0 due to IRQ sharing. And holding interrupts off during a big PIO opration is expensive, so we only want to do that if we know the page was highmem. So revert commit 17fd47ab4d33e764216b87006d8118fa050b4c92 Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31[PATCH] i386: CONFIG_PC removalArthur Othieno
CONFIG_PC is left-over cruft after the introduction of CONFIG_X86_PC with the subarch split. Remove it, and fixup the remaining users to depend on CONFIG_X86_PC instead. Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31[PATCH] noop-iosched: avoid corrupted request mergingJens Axboe
Tejun Heo notes: "I'm currently debugging this. The problem is that we are using the generic dispatch queue directly in the noop sched and merging is NOT allowed on dispatch queues but generic handling of last_merge tries to merge requests. I'm still trying to verify this, so I'll be back with results soon." In the meantime, disable merging for noop by setting REQ_NOMERGE in elevator_noop_add_request(). Eventually, we should add a noop_list and do the dispatching like in the other io schedulers. Merging is still beneficial for noop (and it has always done it). Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31[PATCH] Fix on-the-fly switch from cfq i/o schedulerJens Axboe
Don't clear ->elevator_data on exit, if we are switching queues we are overwriting the data of the new io scheduler. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31Input: adbhid - fix OOPS introduced by dynalloc conversionPaul Mackerras
The problem is that adbhid[]->input is NULL, so the kernel oopses with a null pointer dereference as soon as a key is pressed. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: lkkbd - fix debug message in lkkbd_interrupt()Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: pcspkr - fix setting name and phys for the deviceDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: fix input_dev registration messageDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: evdev - allow querying SW state from compat ioctlDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: evdev - allow querying EV_SW bits from compat_ioctlDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-30[libata] locking rewrite (== fix)Jeff Garzik
A lot of power packed into a little patch. This change eliminates the sharing between our controller-wide spinlock and the SCSI core's Scsi_Host lock. As the locking in libata was already highly compartmentalized, always referencing our own lock, and never scsi_host::host_lock. As a side effect, this change eliminates a deadlock from calling scsi_finish_command() while inside our spinlock.
2005-10-30[libata] ata_tf_to_host cleanupsJeff Garzik
Integrate ata_exec() and ata_tf_to_host() into their only caller, ata_bus_edd(). Rename ata_tf_to_host_nolock() to ata_tf_to_host(). This makes locking a bit easier to review, and may help pave the way for future changes.
2005-10-31Merge ../linux-2.6 by handPaul Mackerras
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds
2005-10-30[PATCH] fix missing includesTim Schmielau
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: hpet driver cleanupsRandy Dunlap
- Use kzalloc() instead of kmalloc + memset. - Clean/fix some printk's. - Use NULL for pointers instead of 0. - Combine hpet busy searching locations into a function call. Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: use HPET physical addresses for dup. detectionRandy Dunlap
- Use HPET physical address to detect duplicates, not logical addresses. Using logical (mapped) addresses fails to detect duplicates because ioremap() returns a new mapped address each time. - iounmap() regions when duplicate/busy areas are found. Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: allow HPET FIXED_MEM32 resource typeRandy Dunlap
Allow the ACPI HPET description table to use a resource type of FIXED_MEM32 for the HPET reource. Use the fixed resoure size of 1 KB for the HPET resource as per the HPET spec. Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: simplify initialization messageClemens Ladisch
When booting, display the timer frequency in Hertz instead of as tick length in nanoseconds. Apart from saving a local variable, this makes the message more easily comprehensible. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: remove superfluous indirectionsClemens Ladisch
In the hpet_ioctl_common() function, devp->hd_hpets is already cached in the hpetp variable, so we can use just that. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix access to multiple HPET devicesClemens Ladisch
Fix two instances where a function would access the first HPET device instead of the current one. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix uninitialized variable in hpet_register()Clemens Ladisch
Clear the ht_opaque field in the hpet_register() function before searching for a free timer to prevent the function from incorrectly assuming that the search succeeded afterwards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix division by zero in HPET_INFOClemens Ladisch
Fix a division by zero that happened when the HPET_INFO ioctl was called before a timer frequency had been set. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix HPET_INFO calls from kernel spaceClemens Ladisch
Fix a wrong memory access in hpet_ioctl_common(). It was not possible to use the HPET_INFO ioctl from kernel space because it always called copy_to_user(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: allow shared interruptsClemens Ladisch
This patch adds support for shared HPET interrupts. The driver previously acknowledged interrupts for both edge and level interrupts, but didn't actually allow a shared interrupt in the latter case. We use a new per-timer flag to save whether the timer's interrupt might be shared, and use it to do the processing required for level interrupts only if necessary. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: allow non-power-of-two frequenciesClemens Ladisch
It was only the RTC hardware that restricted interrupt frequencies to a power of two. There is no reason to take over this restriction into the HPET driver, so remove the offending check. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: remove superfluous register readsClemens Ladisch
This patch removes several reads of a timer's config register that serve no purpose whatsoever. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: remove unused variableClemens Ladisch
The variable hpet_ntimer is never read, so remove it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] HPET: make frequency calculations 32 bit safeClemens Ladisch
On 32-bit architectures, the multiplication in the argument for hpet_time_div() often overflows. In the typical case of a 14.32 MHz timer, this happens when the desired frequency exceeds 61 Hz. To avoid this multiplication, we can precompute and store the hardware timer frequency, instead of the period, in the device structure, which leaves us with a simple division when computing the number of timer ticks. As a side effect, this also removes a theoretical bug where the timer interpolator's frequency would be computed as a 32-bit value even if the HPET frequency is greater than 2^32 Hz (the HPET spec allows up to 10 GHz). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: disallow zero interrupt frequencyClemens Ladisch
Disallow setting an interrupt frequency of zero (which would result in a division by zero), and disallow enabling the interrupt when the frequency hasn't yet been set (which would use an interrupt period of zero). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] sparse cleanups: NULL pointers, C99 struct init.Randy Dunlap
Convert most of the remaining "Using plain integer as NULL pointer" sparse warnings to use NULL. (Not duplicating patches that are already in -mm, -bird, or -kj.) Convert isdn driver struct initializer to use C99 syntax. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm-tidiesAndrew Morton
- Various whitespace fixes - Use kzalloc() Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] Infineon TPM: move infineon driver off pci_devMarcel Selhorst
Move the Infineon TPM driver off pci device and makes it a pure pnp-driver. It includes pnp-port validation and region requesting. Signed-off-by: Marcel Selhorst <selhorst@crypto.rub.de> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: move nsc driver off pci_devKylene Jo Hall
This patch changes the nsc driver from a pci driver to a platform driver. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: move atmel driver off pci_devKylene Jo Hall
This patch changes the atmel driver from a pci driver to a platform driver. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: change from pci_dev to dev power management functionsKylene Jo Hall
This patch is in support of moving away from the lpc bus pci_dev. The power management prototypes used by platform drivers is different but the functionality remains the same. Signed-off-by: Kylene Hall <kjhall@us.ibm.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: remove pci dependencyKylene Jo Hall
Since the tpm does not have it's own pci id we have been consuming the lpc bus. This is not correct and causes problems to support non lpc bus chips. This patch removes the dependency on pci_dev from tpm.c The subsequent patches will stop the supported chips from registering as pci drivers. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: add status function to allow non-lpc bus chipsKylene Jo Hall
This patch is in preparation of supporting chips that are not necessarily on the lpc bus and thus are not accessed with inb's and outb's. The patch replaces the call to get the chip's status in the tpm.c file with a vendor specific status function. The patch also defines the function for each of the current supported devices. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] Don't set dcdbas driver to default mAndi Kleen
It's nasty to set random drivers to default m because people who just press enter on make oldconfig get these. Remove the default m Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] rocketport: make it work when statically linked into kernelBjorn Helgaas
The driver had incorrectly wrapped module_init(rp_init) in #ifdef MODULE, so it worked only when compiled as a module. Tested by Wolfgang Denk with this device: 00:0e.0 Communication controller: Comtrol Corporation RocketPort 8 port w/RJ11 connectors (rev 04) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 7000 [size=64] Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] watchdog: update .owner field of struct pci_driverLaurent Riffard
This updates .owner field of struct pci_driver. This allows SYSFS to create the symlink from the driver to the module which provides it. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] SyncLink adapters: updates .owner field of struct pci_driverLaurent Riffard
This updates .owner field of struct pci_driver. This allows SYSFS to create the symlink from the driver to the module which provides it. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] epca: update .owner field of struct pci_driverLaurent Riffard
This updates .owner field of struct pci_driver. This allows SYSFS to create the symlink from the driver to the module which provides it. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] fix vgacon blankingPozsar Balazs
This patch fixes a long-standing vgacon bug: characters with the bright bit set were left on the screen and not blacked out. All I did was that I lookuped up some examples on the net about setting the vga palette, and added the call missing from the linux kernel, but included in all other ones. It works for me. You can test this by writing something with the bright set to the console, for example: echo -e "\e[1;31mhello there\e[0m" and then wait for the console to blank itself (by default, after 10 mins of inactivity), maybe making it faster using setterm -blank 1 so you only have to wait 1 minute. Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] setkeys needs rootAndrew Morton
Because people can play games reprogramming keys and leaving traps for the next user of the console. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 23:45:24 +0000