summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2009-06-15cmd64x: implement test_irq() methodSergei Shtylyov
Convert the driver's two dma_test_irq() methods into test_irq() methods. The driver will now use the standard dma_test_irq() method implementation which allows to remove 'cmd54x_dma_ops' and 'cmd648_dma_ops' that become identical to 'sff_dma_ops'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15cmd640: implement test_irq() methodSergei Shtylyov
Implement test_irq() method, adding the drive 2/3 interrupt bit definition. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15ide: move ack_intr() method into 'struct ide_port_ops' (take 2)Sergei Shtylyov
Move the ack_intr() method into 'struct ide_port_ops', also renaming it to test_irq() while at it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)Sergei Shtylyov
There are now two methods that clear the port interrupt: ack_intr() method, implemented only on M680x0 machines, that is called at the start of ide_intr(), and clear_irq() method, that is called somewhat later in this function. In order to stop this duplication, delegate the task of clearing the interrupt to clear_irq() method, only leaving to ack_intr() the task of testing for the port interrupt. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15siimage: use ide_dma_test_irq() (take 2)Sergei Shtylyov
Remove interrupt bit test (not trusted anyway) from siimage_io_dma_test_irq() and siimage_mmio_dma_test_irq() -- this allows to replace the former function with now identical ide_dma_test_irq()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15cmd64x: implement clear_irq() method (take 2)Sergei Shtylyov
Convert the driver's two dma_end() methods into clear_irq() methods -- the driver will now use the standard dma_end() method implementation, ide_dma_end(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15ide: call clear_irq() method in ide_timer_expiry()Sergei Shtylyov
Now the clear_irq() method is called only from ide_intr() but ide_timer_expiry() also should call this method in case when drive_is_ready() succeeds... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15sgiioc4: coding style cleanupSergei Shtylyov
Fix several errors and warnings given by checkpatch.pl: - space between the asterisk and parameter name; - inconsistent spacing between operator and operands; - space between *sizeof* and open parenthesis; - #include <asm/io.h> instead of #include <linux/io.h> - use of *typedef* instead of a structure tag; - line over 80 characters. In addition to these changes, also do the following: - indent with tabs instead of spaces; - put the function's result type and name/parameters on the same line; - join back the needlessly broken lines; - get rid of needless type cast in sgiioc4_checkirq(); - remove space between the type cast and the variable name; - remove commented out field initializer; - uppercase the acronyms, lowercase the normal words in the comments; - fix up the multi-line comment style... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15ide: don't enable IORDY at a probe timeBartlomiej Zolnierkiewicz
* Add 'unsigned long port_flags' field to ide_hwif_t. * Add IDE_PFLAG_PROBING port flag and keep it set during probing. * Fix ide_pio_need_iordy() to not enable IORDY at a probe time (IORDY may lead to controller lock up on certain controllers if the port is not occupied). Loosely based on the recent libata's fix by Tejun, thanks to Alan for the hint that IDE may also need it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15ide: IORDY handling fixesBartlomiej Zolnierkiewicz
Add ide_pio_need_iordy() helper and convert host drivers to use it. This fixes it8172, it8213, pdc202xx_old, piix, slc90e66 and siimage host drivers to handle IORDY correctly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15ide-tape: fix build issueBorislav Petkov
This fixes drivers/ide/ide-tape.c: In function `idetape_chrdev_open': drivers/ide/ide-tape.c:1515: error: implicit declaration of function `idetape_read_position' make[1]: *** [drivers/ide/ide-tape.o] Error 1 Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-13Merge branch 'bp-remove-pc-buf' into for-nextBartlomiej Zolnierkiewicz
Conflicts: drivers/ide/ide-tape.c
2009-06-12Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (30 commits) [S390] wire up sys_perf_counter_open [S390] wire up sys_rt_tgsigqueueinfo [S390] ftrace: add system call tracer support [S390] ftrace: add function graph tracer support [S390] ftrace: add function trace mcount test support [S390] ftrace: add dynamic ftrace support [S390] kprobes: use probe_kernel_write [S390] maccess: arch specific probe_kernel_write() implementation [S390] maccess: add weak attribute to probe_kernel_write [S390] profile_tick called twice [S390] dasd: forward internal errors to dasd_sleep_on caller [S390] dasd: sync after async probe [S390] dasd: check_characteristics cleanup [S390] dasd: no High Performance FICON in 31-bit mode [S390] dcssblk: revert devt conversion [S390] qdio: fix access beyond ARRAY_SIZE of irq_ptr->{in,out}put_qs [S390] vmalloc: add vmalloc kernel parameter support [S390] uaccess: use might_fault() instead of might_sleep() [S390] 3270: lock dependency fixes [S390] 3270: do not register with tty_register_device ...
2009-06-12Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (50 commits) drm: include kernel list header file in hashtab header drm: Export hash table functionality. drm: Split out the mm declarations in a separate header. Add atomic operations. drm/radeon: add support for RV790. drm/radeon: add rv740 drm support. drm_calloc_large: check right size, check integer overflow, use GFP_ZERO drm: Eliminate magic I2C frobbing when reading EDID drm/i915: duplicate desired mode for use by fbcon. drm/via: vfree() no need checking before calling it drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds drm: add separate drm debugging levels radeon: remove _DRM_DRIVER from the preadded sarea map drm: don't associate _DRM_DRIVER maps with a master drm: simplify kcalloc() call to kzalloc(). intelfb: fix spelling of "CLOCK" drm: fix LOCK_TEST_WITH_RETURN macro drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect) ...
2009-06-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Add empty suspend/resume device irq functions PM/Hibernate: Move NVS routines into a seperate file (v2). PM/Hibernate: Rename disk.c to hibernate.c PM: Separate suspend to RAM functionality from core Driver Core: Rework platform suspend/resume, print warning PM: Remove device_type suspend()/resume() PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2) PM/Suspend: Do not shrink memory before suspend PM: Remove bus_type suspend_late()/resume_early() V2 PM core: rename suspend and resume functions PM: Rename device_power_down/up() PM: Remove unused asm/suspend.h x86: unify power/cpu_(32|64).c x86: unify power/cpu_(32|64) copyright notes x86: unify power/cpu_(32|64) regarding restoring processor state x86: unify power/cpu_(32|64) regarding saving processor state x86: unify power/cpu_(32|64) global variables x86: unify power/cpu_(32|64) headers PM: Warn if interrupts are enabled during suspend-resume of sysdevs PM/ACPI/x86: Fix sparse warning in arch/x86/kernel/acpi/sleep.c
2009-06-12Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits) microblaze: Don't use access_ok for unaligned microblaze: remove unused flat_stack_align() definition microblaze: Fix problem with early_printk in startup microblaze_mmu_v2: Makefiles microblaze_mmu_v2: Kconfig update microblaze_mmu_v2: stat.h MMU update microblaze_mmu_v2: Elf update microblaze_mmu_v2: Update dma.h for MMU microblaze_mmu_v2: Update cacheflush.h microblaze_mmu_v2: Update signal returning address microblaze_mmu_v2: Traps MMU update microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU microblaze_mmu_v2: Update linker script for MMU microblaze_mmu_v2: Add MMU related exceptions handling microblaze_mmu_v2: uaccess MMU update microblaze_mmu_v2: Update exception handling - MMU exception microblaze_mmu_v2: entry.S, entry.h microblaze_mmu_v2: Add CURRENT_TASK for entry.S microblaze_mmu_v2: MMU asm offset update microblaze_mmu_v2: Update tlb.h and tlbflush.h ...
2009-06-12Merge branch 'for-linus' of git://linux-arm.org/linux-2.6Linus Torvalds
* 'for-linus' of git://linux-arm.org/linux-2.6: kmemleak: Add more info to the MAINTAINERS entry kmemleak: Remove the kmemleak.h include in drivers/char/vt.c
2009-06-12Driver Core: Rework platform suspend/resume, print warningMagnus Damm
This patch reworks the platform driver code for legacy suspend and resume to avoid installing callbacks in struct device_driver. A warning is also added telling users to update the platform driver to use dev_pm_ops. The functions platform_legacy_suspend()/resume() directly call suspend and resume callbacks in struct platform_driver instead of wrapping things in platform_drv_suspend()/resume(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12PM: Remove device_type suspend()/resume()Magnus Damm
This patch removes the legacy callbacks ->suspend() and ->resume() from struct device_type. These callbacks seem unused, and new code should instead make use of struct dev_pm_ops. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12PM: Remove bus_type suspend_late()/resume_early() V2Magnus Damm
Remove the ->suspend_late() and ->resume_early() callbacks from struct bus_type V2. These callbacks are legacy stuff at this point and since there seem to be no in-tree users we may as well remove them. New users should use dev_pm_ops. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12PM core: rename suspend and resume functionsAlan Stern
This patch (as1241) renames a bunch of functions in the PM core. Rather than go through a boring list of name changes, suffice it to say that in the end we have a bunch of pairs of functions: device_resume_noirq dpm_resume_noirq device_resume dpm_resume device_complete dpm_complete device_suspend_noirq dpm_suspend_noirq device_suspend dpm_suspend device_prepare dpm_prepare in which device_X does the X operation on a single device and dpm_X invokes device_X for all devices in the dpm_list. In addition, the old dpm_power_up and device_resume_noirq have been combined into a single function (dpm_resume_noirq). Lastly, dpm_suspend_start and dpm_resume_end are the renamed versions of the former top-level device_suspend and device_resume routines. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12PM: Rename device_power_down/up()Magnus Damm
Rename the functions performing "_noirq" dev_pm_ops operations from device_power_down() and device_power_up() to device_suspend_noirq() and device_resume_noirq(). The new function names are chosen to show that the functions are responsible for calling the _noirq() versions to finalize the suspend/resume operation. The current function names do not perform power down/up anymore so the names may be misleading. Global function renames: - device_power_down() -> device_suspend_noirq() - device_power_up() -> device_resume_noirq() Static function renames: - suspend_device_noirq() -> __device_suspend_noirq() - resume_device_noirq() -> __device_resume_noirq() Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12PM: Warn if interrupts are enabled during suspend-resume of sysdevsRafael J. Wysocki
Sysdevs have to be suspended and resumed with interrupts disabled and things usually break in a way that's difficult to debug if one of sysdev drivers enables interrupts by mistake during suspend or resume. Add extra checks that will generate warnings in such cases. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (154 commits) [SCSI] osd: Remove out-of-tree left overs [SCSI] libosd: Use REQ_QUIET requests. [SCSI] osduld: use filp_open() when looking up an osd-device [SCSI] libosd: Define an osd_dev wrapper to retrieve the request_queue [SCSI] libosd: osd_req_{read,write} takes a length parameter [SCSI] libosd: Let _osd_req_finalize_data_integrity receive number of out_bytes [SCSI] libosd: osd_req_{read,write}_kern new API [SCSI] libosd: Better printout of OSD target system information [SCSI] libosd: OSD2r05: Attribute definitions [SCSI] libosd: OSD2r05: Additional command enums [SCSI] mpt fusion: fix up doc book comments [SCSI] mpt fusion: Added support for Broadcast primitives Event handling [SCSI] mpt fusion: Queue full event handling [SCSI] mpt fusion: RAID device handling and Dual port Raid support is added [SCSI] mpt fusion: Put IOC into ready state if it not already in ready state [SCSI] mpt fusion: Code Cleanup patch [SCSI] mpt fusion: Rescan SAS topology added [SCSI] mpt fusion: SAS topology scan changes, expander events [SCSI] mpt fusion: Firmware event implementation using seperate WorkQueue [SCSI] mpt fusion: rewrite of ioctl_cmds internal generated function ...
2009-06-12Merge git://git.infradead.org/~dwmw2/firmware-2.6Linus Torvalds
* git://git.infradead.org/~dwmw2/firmware-2.6: firmware: speed up request_firmware(), v3
2009-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguestLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: (31 commits) lguest: add support for indirect ring entries lguest: suppress notifications in example Launcher lguest: try to batch interrupts on network receive lguest: avoid sending interrupts to Guest when no activity occurs. lguest: implement deferred interrupts in example Launcher lguest: remove obsolete LHREQ_BREAK call lguest: have example Launcher service all devices in separate threads lguest: use eventfds for device notification eventfd: export eventfd_signal and eventfd_fget for lguest lguest: allow any process to send interrupts lguest: PAE fixes lguest: PAE support lguest: Add support for kvm_hypercall4() lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGD lguest: use native_set_* macros, which properly handle 64-bit entries when PAE is activated lguest: map switcher with executable page table entries lguest: fix writev returning short on console output lguest: clean up length-used value in example launcher lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition. lguest: beyond ARRAY_SIZE of cpu->arch.gdt ...
2009-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-virtioLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-virtio: virtio: enhance id_matching for virtio drivers virtio: fix id_matching for virtio drivers virtio: handle short buffers in virtio_rng. virtio_blk: add missing __dev{init,exit} markings virtio: indirect ring entries (VIRTIO_RING_F_INDIRECT_DESC) virtio: teach virtio_has_feature() about transport features virtio: expose features in sysfs virtio_pci: optional MSI-X support virtio_pci: split up vp_interrupt virtio: find_vqs/del_vqs virtio operations virtio: add names to virtqueue struct, mapping from devices to queues. virtio: meet virtio spec by finalizing features before using device virtio: fix obsolete documentation on probe function
2009-06-12Merge ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param: module: cleanup FIXME comments about trimming exception table entries. module: trim exception table on init free. module: merge module_alloc() finally uml module: fix uml build process due to this merge x86 module: merge the rest functions with macros x86 module: merge the same functions in module_32.c and module_64.c uvesafb: improve parameter handling. module_param: allow 'bool' module_params to be bool, not just int. module_param: add __same_type convenience wrapper for __builtin_types_compatible_p module_param: split perm field into flags and perm module_param: invbool should take a 'bool', not an 'int' cyber2000fb.c: use proper method for stopping unload if CONFIG_ARCH_SHARK
2009-06-12Merge branch 'for-2.6.31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits) ide: re-implement ide_pci_init_one() on top of ide_pci_init_two() ide: unexport ide_find_dma_mode() ide: fix PowerMac bootup oops ide: skip probe if there are no devices on the port (v2) sl82c105: add printk() logging facility ide-tape: fix proc warning ide: add IDE_DFLAG_NIEN_QUIRK device flag ide: respect quirk_drives[] list on all controllers hpt366: enable all quirks for devices on quirk_drives[] list hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c ide: remove superfluous SELECT_MASK() call from do_rw_taskfile() ide: remove superfluous SELECT_MASK() call from ide_driveid_update() icside: remove superfluous ->maskproc method ide-tape: fix IDE_AFLAG_* atomic accesses ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically pdc202xx_old: kill resetproc() method pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout pdc202xx_old: use ide_dma_test_irq() ide: preserve Host Protected Area by default (v2) ide-gd: implement block device ->set_capacity method (v2) ...
2009-06-12[SCSI] Merge branch 'linus'James Bottomley
Conflicts: drivers/message/fusion/mptsas.c fixed up conflict between req->data_len accessors and mptsas driver updates. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-12lguest: remove obsolete LHREQ_BREAK callRusty Russell
We no longer need an efficient mechanism to force the Guest back into host userspace, as each device is serviced without bothering the main Guest process (aka. the Launcher). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: use eventfds for device notificationRusty Russell
Currently, when a Guest wants to perform I/O it calls LHCALL_NOTIFY with an address: the main Launcher process returns with this address, and figures out what device to run. A far nicer model is to let processes bind an eventfd to an address: if we find one, we simply signal the eventfd. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Davide Libenzi <davidel@xmailserver.org>
2009-06-12lguest: allow any process to send interruptsRusty Russell
We currently only allow the Launcher process to send interrupts, but it as we already send interrupts from the hrtimer, it's a simple matter of extracting that code into a common set_interrupt routine. As we switch to a thread per virtqueue, this avoids a bottleneck through the main Launcher process. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: PAE fixesRusty Russell
1) j wasn't initialized in setup_pagetables, so they weren't set up for me causing immediate guest crashes. 2) gpte_addr should not re-read the pmd from the Guest. Especially not BUG_ON() based on the value. If we ever supported SMP guests, they could trigger that. And the Launcher could also trigger it (tho currently root-only). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: PAE supportMatias Zabaljauregui
This version requires that host and guest have the same PAE status. NX cap is not offered to the guest, yet. Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGDMatias Zabaljauregui
replace LHCALL_SET_PMD with LHCALL_SET_PGD hypercall name (That's really what it is, and the confusion gets worse with PAE support) Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
2009-06-12lguest: use native_set_* macros, which properly handle 64-bit entries when ↵Matias Zabaljauregui
PAE is activated Some cleanups and replace direct assignment with native_set_* macros which properly handle 64-bit entries when PAE is activated Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: map switcher with executable page table entriesMatias Zabaljauregui
Map switcher with executable page table entries. (This bug didn't matter before PAE and hence NX support -- RR) Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition.Matias Zabaljauregui
If GDT_ENTRIES were every > 256, this could become a problem. Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: beyond ARRAY_SIZE of cpu->arch.gdtRoel Kluin
Do not go beyond ARRAY_SIZE of cpu->arch.gdt Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: improve interrupt handling, speed up stream networkingRusty Russell
lguest never checked for pending interrupts when enabling interrupts, and things still worked. However, it makes a significant difference to TCP performance, so it's time we fixed it by introducing a pending_irq flag and checking it on irq_restore and irq_enable. These two routines are now too big to patch into the 8/10 bytes patch space, so we drop that code. Note: The high latency on interrupt delivery had a very curious effect: once everything else was optimized, networking without GSO was faster than networking with GSO, since more interrupts were sent and hence a greater chance of one getting through to the Guest! Note2: (Almost) Closing the same loophole for iret doesn't have any measurable effect, so I'm leaving that patch for the moment. Before: 1GB tcpblast Guest->Host: 30.7 seconds 1GB tcpblast Guest->Host (no GSO): 76.0 seconds After: 1GB tcpblast Guest->Host: 6.8 seconds 1GB tcpblast Guest->Host (no GSO): 27.8 seconds Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: fix race in halt codeRusty Russell
When the Guest does the LHCALL_HALT hypercall, we go to sleep, expecting that a timer or the Waker will wake_up_process() us. But we do it in a stupid way, leaving a classic missing wakeup race. So split maybe_do_interrupt() into interrupt_pending() and try_deliver_interrupt(), and check maybe_do_interrupt() and the "break_out" flag before calling schedule. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12lguest: fix lguest wake on guest clock tick, or fd activityRusty Russell
The Launcher could be inside the Guest on another CPU; wake_up_process will do nothing because it is "running". kick_process will knock it back into our kernel in this case, otherwise we'll miss it until the next guest exit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12virtio: enhance id_matching for virtio driversChristian Borntraeger
This patch allows a virtio driver to use VIRTIO_DEV_ANY_ID for the device id. This will be used by a test module that can be bound to any virtio device. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12virtio: fix id_matching for virtio driversChristian Borntraeger
This bug never appeared, since all current virtio drivers use VIRTIO_DEV_ANY_ID for the vendor field. If a real vendor would be used, the check in virtio_id_match is wrong - it returns 0 if id->vendor == dev->id.vendor. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12virtio: handle short buffers in virtio_rng.Rusty Russell
If the device fills less than 4 bytes of our random buffer, we'll BUG_ON. It's nicer to handle the case where it partially fills the buffer (the protocol doesn't explicitly bad that). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12virtio_blk: add missing __dev{init,exit} markingsMike Frysinger
The remove member of the virtio_driver structure uses __devexit_p(), so the remove function itself should be marked with __devexit. And where there be __devexit on the remove, so is there __devinit on the probe. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12virtio: indirect ring entries (VIRTIO_RING_F_INDIRECT_DESC)Mark McLoughlin
Add a new feature flag for indirect ring entries. These are ring entries which point to a table of buffer descriptors. The idea here is to increase the ring capacity by allowing a larger effective ring size whereby the ring size dictates the number of requests that may be outstanding, rather than the size of those requests. This should be most effective in the case of block I/O where we can potentially benefit by concurrently dispatching a large number of large requests. Even in the simple case of single segment block requests, this results in a threefold increase in ring capacity. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12virtio: expose features in sysfsRusty Russell
Each device negotiates feature bits; expose these in sysfs to help diagnostics and debugging. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12virtio_pci: optional MSI-X supportMichael S. Tsirkin
This implements optional MSI-X support in virtio_pci. MSI-X is used whenever the host supports at least 2 MSI-X vectors: 1 for configuration changes and 1 for virtqueues. Per-virtqueue vectors are allocated if enough vectors available. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ whitespace, style)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-24 06:10:55 +0000