summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2006-03-12[SCSI] qla2xxx: Add VPD sysfs attribute.andrew.vasquez@qlogic.com
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] qla2xxx: Correct swing/emphasis settings on ISP24xx.andrew.vasquez@qlogic.com
Reserved-bit 15 must set when updating the swing/emphasis values. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] qla2xxx: NVRAM id-list updates.andrew.vasquez@qlogic.com
Resync with latest NVRAM subsystem ID list. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] qla2xxx: Consolidate ISP63xx handling.andrew.vasquez@qlogic.com
As new 23xx firmware will accomidate ISP63xx types. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] qla2xxx: Add ISP54xx support.andrew.vasquez@qlogic.com
Chip is similar in form to our ISP24xx offering. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] qla2xxx: Convert IS_QLA*() defines to bit-operations.andrew.vasquez@qlogic.com
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] fix two leaks in scsi_alloc_sdev failure pathsDave Jones
If the scsi_alloc_queue or the slave_alloc calls in scsi_alloc_device fail, we forget to release the locally allocated sdev on the failure path. Coverity #609 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] Make sgiwd93_detect and sgiwd93_detect static.Ralf Baechle
Nothing outside sgiwd93.c references them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: don't use parenthesis with "return"Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: LindentAlexey Dobriyan
It's much, much more readable now. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: untypedef struct SCCBcardAlexey Dobriyan
* struct SCCBcard => struct sccb_card * PSCCBcard => struct sccb_card * * SCCBCARD => struct sccb_card Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: untypedef struct NVRAMInfoAlexey Dobriyan
* struct NVRAMInfo => struct nvram_info * PNVRamInfo => struct nvram_info * * NVRAMINFO => struct nvram_info Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: untypedef struct SCCBMgr_tar_infoAlexey Dobriyan
* struct SCCBMgr_tar_info => struct sccb_mgr_tar_info * PSCCBMgr_tar_info => struct sccb_mgr_tar_info * * SCCBMGR_TAR_INFO => struct sccb_mgr_tar_info Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: untypedef struct SCCBMgr_infoAlexey Dobriyan
* struct SCCBMgr_info => struct sccb_mgr_info * PSCCBMGR_INFO => struct sccb_mgr_info * * SCCBMGR_INFO => struct sccb_mgr_info Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: untypedef struct _SCCBAlexey Dobriyan
* struct _SCCB => struct sccb * PSCCB => struct sccb * * SCCB => struct sccb Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: use standard fixed size typesAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove ushort_ptrAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove ULONGAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove UINTAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove USHORTAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove UCHARAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove trivial wrappersAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] drivers/scsi/FlashPoint.c: remove unused thingsAlexey Dobriyan
* Remove unused #define's * Remove unused typedefs. * Remove prototypes for non-existing functions. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] MODULE_ALIAS_{BLOCK,CHAR}DEV_MAJOR for drivers/scsiRene Herman
Add device-major aliases in drivers/scsi, allowing kmod autoload: MODULE_ALIAS_CHARDEV_MAJOR(SCSI_CHANGER_MAJOR) MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR) MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR) MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR) MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISKN_MAJOR) Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: Avoid renegotiation on inquiryHannes Reinecke
Because of some quirk in the SCSI spec the aic79xx driver chose to force a renegotiation when sending an inquiry. This should better be handled by the upper layers if required at all. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: use BIOS settingsHannes Reinecke
This patch fixes the aic79xx driver to properly respond to BIOS settings. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: Invalid Sequencer interrupt occuredHannes Reinecke
On certain systems the driver seems to hit upon some "scsi0: Invalid Sequencer interrupt occurred." problem and dumps card state. According to Adaptec engineers this message is harmless. So as not to confuse user we can as well disable the internal card state dump and just print out the message itself. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: Update error recoveryHannes Reinecke
This patch updates the error recovery. Routines for TARGET RESET and ABORT COMMAND are split up as the logic is quite dissimilar. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: Remove dead codeHannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: use tcq functionsHannes Reinecke
This patch converts aic79xx to use the midlayer-supplied tcq functions. We also set the queuedepth to '1' if tcq is disabled; the aic79xx driver gets confused otherwise. Will set it back to '2' once I figure out how to queue requests in the driver. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] aic79xx: remove qfrozenHannes Reinecke
This patch removes the need for platform_data->qfrozen. We're now using complete() instead of semaphores thus simplifying ahd_freeze_simq() quite a lot. This also fixes some deadlocks in the recovery code (again). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Change version number to 8.1.4James Smart
Change version number to 8.1.4 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Two misc fixesJames Smart
Two misc fixes: - Fix deadlock caused by return with host_lock held in lpfc_findnode_did - Initialize all fields of the allocated mail box structure to zero. Was causing some sysfs mailbox commands to fail immediately after load. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Introduce lpfc_reset_barrier() function for resets on ↵James Smart
dual channel adapters Introduce lpfc_reset_barrier() function for resets on dual channel adapters Workaround for a hardware errata on dual channel asics. There is a potential for the chip to lock up on a reset if a shared dma engine is in use. The (ugly) work around requires a reset process which uses a mailbox command to synchronize the independent channels prior to the reset to avoid the issue. Unfortunately, the timing windows required to ensure this workaround succeeds are very specific, meaning we can't release the cpu during the barrier. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fixed a timer panic due to timer firing after freeing ndlpJames Smart
Fixed a timer panic due to timer firing after freeing ndlp Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fixed RSCN handling when a PLOGI is in retryJames Smart
Fixed RSCN handling when a PLOGI is in retry. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fix Discovery processing for NPorts that change their ↵James Smart
NPortId on the fly Fix Discovery processing for NPorts that change their NPortId on the fly due to a cable swap. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] i2o: fix memory leak in i2o_exec_lct_modifiedVasily Averin
i2o_exec_lct_modified() does not release memory allocated for work_struct. Signed-off-by: Vasily Averin <vvs@sw.ru> Although your patch is the same, i've rewritten it a little bit for naming consistency in the I2O driver. Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] wd33c93: Fix missing prototypes by including <linux/interrupt.h>.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-09[SCSI] add missing transport_container_unregister in sas classJames Bottomley
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-07[SCSI] sr: partial revert of 24669f75a3231fa37444977c92d1f4838bec1233James Bottomley
The patch [SCSI] SCSI core kmalloc2kzalloc Has an incorrect piece in sr_ioctl.c; it changes buffer from kmalloc to kzalloc, but then removes the clearing of the stack variable struct packet_command. This, in turn leaves rubbish in the sense pointer which the sr_do_ioctl() command then happily writes to ... oops. Thanks to Mike Christie <michaelc@cs.wisc.edu> for spotting this. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-07[SCSI] osst: changes required to move forward to block requestWillem Riede
On 02/07/2006 04:12:55 AM, Christoph Hellwig wrote: > On Mon, Feb 06, 2006 at 08:02:21PM -0500, Willem Riede wrote: > > > But I will certainly help retire scsi_request. And anything else that is > > needed to keep up with proper kernel style. Let me know what those are, if > > you would? I'll start looking at how st has changed, and will be back with > > any questions I may have. > > right now the above is the most urgent bit. What would be nice but not > required is a conversion to the sense handling helpers, similar to what > st got (aka using the *normalize_sense functions and then dealing with the > parsed sense buffer instead of the raw sense data) Ok, so here is my first take at satisfying this request. Be warned, that beyond compiling, and checking that the new module doesn't immediately blow up, there hasn't yet been a lot of testing. But this should allow you to comment on the changes, and move forward with dropping scsi_request from the kernel code. Signed-off-by: Willem Riede <osst@riede.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[SCSI] lpfc: minor syntax fixesJames Bottomley
Stop gcc complaining about undefined variables Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Change version number to 8.1.3Jamie Wellnitz
Change version number to 8.1.3 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix polling mode panicJamie Wellnitz
Fix polling mode panic Cause: Race between interrupt driven and polling path in harvesting iocbs from the response ring. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Protect NPL lists with host lockJamie Wellnitz
Protect NPL lists with host lock Symptoms: lpfc_findnode_rpi and lpfc_findnode_did can be called outside of the discovery thread context. We have to iterate through the NPL lists under the host lock and all add/del operations on those lists have to be done under host lock. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix deadlock in lpfc_fdmi_tmo_handlerJamie Wellnitz
Fix deadlock in lpfc_fdmi_tmo_handler lpfc_fdmi_tmo_handler was calling lpfc_fdmi_cmd with the host_lock held. lpfc_fdmi_cmd assumes the host_lock is released as it calls functions that acquire the host_lock. lpfc_fdmi_tmo_handler acquired the host_lock to protect access to work_hba_events. This was already checked in the worker thread so we can remove that code completely and remove access to the host_lock. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix performance when using multiple SLI ringsJamie Wellnitz
Fix performance when using multiple SLI rings Currently the driver allocates all of its SLI command and response ring entries to one primary ring. Other rings get little, or no, resources. Allow more resources to be given to ring 1 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Remove unused MBhostaddr from lpfc_sli structureJamie Wellnitz
Remove unused MBhostaddr from lpfc_sli structure Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: PCI hrd_type should be obtained with ↵Jamie Wellnitz
pci_read_config_byte() macro PCI hrd_type should be obtained with pci_read_config_byte() macro Driver keys off of this field to report the proper adapter type. The pci subsystem explicitly clears the multiport bit in the copy of the field given the driver. Thus, to properly name the card, obtain it from config space. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 05:25:24 +0000