summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2010-10-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ipw2x00/ipw2200.c
2010-10-07ath9k_hw: Fix hw reset failure with HTC driverRajkumar Manoharan
The following commit removed DISABLE_REGWRITE_BUFFER ops. The unnecessary REGWRITE_BUFFER_FLUSH was not removed properly which is causing failure on hw reset. Author: Felix Fietkau <nbd@openwrt.org> Date: Tue Oct 5 12:03:42 2010 +0200 ath9k_hw: clean up register write buffering Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07wl1271: Support FEM autodetectionJuuso Oikarinen
In the NVS/INI-parameters for the driver/firmware there is the FEM (front end module) selection option, which may configure the hardware FEM via autodetection or manual selection. So far, there has been support for manual selection only. Add support for FEM autodetection. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-10-07Revert "rtl8180: use NAPI for bottom-half processing"John W. Linville
This reverts commit 030725d2c7c1fafec7ede618647bf30ed79601f0. This commit relies on commit 5ed3bc7288487bd4f891f420a07319e0b538b4fe ("mac80211: use netif_receive_skb in ieee80211_tx_status callpath") Unfortunately not all drivers are calling ieee80211_tx_status from a compatible context, so that commit needs to be reverted in 2.6.36. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06bonding: add Speed/Duplex information to /proc/net/bonding/bondKrzysztof Oledzki
Effect: Slave Interface: eth5 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: XX:XX:XX:XX:XX:XX Slave queue ID: 0 Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06iwlagn: add define for MODULE_FIRMWAREWey-Yi Guy
Adding MODULE_FIRMWARE define for 130 series of devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: fix module firmware name for 130 series deviceWey-Yi Guy
130 series device should use firmware name with 130 in it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06bonding: reread information about speed and duplex when interface goes upKrzysztof Piotr Oledzki
When an interface was enslaved when it was down, bonding thinks it has speed -1 even after it goes up. This leads into selecting a wrong active interface in active/backup mode on mixed 10G/1G or 1G/100M environment. before: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. after: bonding: bond0: link status definitely up for interface eth5, 10000 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex. Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bonding: print information about speed and duplex seen by the driverKrzysztof Piotr Oledzki
before: bonding: bond0: link status definitely up for interface eth5 bonding: bond0: link status definitely up for interface eth0 after: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: update version to 1.60.00-1Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: properly initialize FW statsDmitry Kravkov
Client statistics need to be initialized to -1 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: code beautifyDmitry Kravkov
This patch does not include any functional changes. The changes are: empty lines, indentation and comments. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x, cnic: Fix SPQ return creditDmitry Kravkov
Return proper L2 and L5 SPQ (slow path queue) credits. Previously, all SPQ events were counted as L5 types. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: move msix table initialization to probe()Dmitry Kravkov
Decide which interrupt mode to use (MSI-X, MSI, INTa) only once in probe() and initialize appropriate structures. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: use L1_CACHE_BYTES instead of magic numberDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: use proper constants for dma_unmap* callsDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: remove unused fields in main driver structureDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: remove unused parameter in reuse_rx_skb()Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: Add 57712 supportDmitry Kravkov
57712 HW supported with same set of features as for 57710/57711 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: change type of spq_left to atomicDmitry Kravkov
The field is now accessed from different contexts. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: rename MF related fieldsDmitry Kravkov
MF (multi-function) mode supported not only by 57711E (E1H) devices, but also by coming 57712E, then we use more generic names. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x, cnic, bnx2i: use new FW/HSIDmitry Kravkov
This is the new FW HSI blob and the relevant definitions without logic changes. It also included code adaptation for new HSI. New features are not enabled. New FW/HSI includes: - Support for 57712 HW - Future support for VF (not used) - Improvements in FW interrupts scheme - FW FCoE hooks (stubs for future usage) Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: create folder for bnx2x firmware filesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06cnic: Fine-tune ring init code.Michael Chan
Initialize the rings only during cnic_uio_open() and shut them down during cnic_uio_close(). Check for the new bit CNIC_LCL_FL_RINGS_INITED before checking for ring interrupt. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06cnic: Use pfid for internal memory offsets.Michael Chan
The pfid (physical function ID) is the same as PCI function on production devices. The pfid for future devices will be different and will be used for internal memory offsets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06cnic: Pass cp pointer to BNX2X_HW_CID.Michael Chan
Preparation work for upcoming firmware interface changes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06[PATCH net-next] tg3: Set real_num_rx_queues for non-multiq devsMatt Carlson
Commit 2ddaad397c47de012dfb956b0c05540da1a0dde5 entitled "tg3: Use netif_set_real_num_{rx,tx}_queues()" added a new call to netif_set_real_num_rx_queues in tg3_enable_msix(). This call also needs to be added to the legacy path to correctly reflect the actual number of rx queues. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06Revert "iwlwifi: do not perferm force reset while doing scan"Stanislaw Gruszka
This reverts commit 7acc7c683a747689aaaaad4fce1683fc3f85e552. It was applied to avoid possible warning in ieee80211_restart_hw, however reason of the warning were races in mac80211, currently hopefully fixed. Not reseting device when performing scan is bad for two reasons. When forcing reset from iwl_check_stuck_queue(), in case of fail, reset will be repeated until scan finish. But since firmware is in bad shape, scan only finish after scan_check work (about 7s). So we will delay the reset, what is not good behaviour. When forcing reset from iwl_recover_from_statistics(), we will not repeat the reset, so we will not perform reset at all when needed. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06b43: N-PHY: don't duplicate setting channel in shared memoryRafał Miłecki
It's already set in PHY common code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06b43: define B43_SHM_SH_CHAN_40MHZRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06b43: N-PHY: simplify channel switchingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06cfg80211/mac80211: allow per-station GTKsJohannes Berg
This adds API to allow adding per-station GTKs, updates mac80211 to support it, and also allows drivers to remove a key from hwaccel again when this may be necessary due to multiple GTKs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k: Introduce a wrapper for power save disable.Senthil Balasubramanian
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k: remove unnecessary power save flags.Senthil Balasubramanian
drv_config callback is called only after the ack for the nullframe is received and so driver need not do anything special for this. So remove NULLFUNC_COMPLETED, PS_ENABLED flags and bf_isnullfunc flags from ath9k as mac80211 already handles them properly. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k_hw: merge ath9k_hw_ani_monitor_old and ath9k_hw_ani_monitor_newFelix Fietkau
After the last rounds of cleanup, these functions are now functionally equivalent and can thus be merged. Also get rid of some excessive (and redundant) debug messages. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k_hw: remove function pointer abstraction for internal ANI opsFelix Fietkau
The code gets more concise and readable when making the new ANI functions fall back to the old ones if ANI v2 is disabled. This also makes further code cleanup easier. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k_hw: remove code duplication in phy error counter handlingFelix Fietkau
Split out the PHY error counter update from ath9k_hw_ani_monitor_*, reuse it in ath9k_hw_proc_mib_event (merged from ath9k_hw_proc_mib_event_old and ath9k_hw_proc_mib_event_new). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k_hw: clean up ANI state handlingFelix Fietkau
ANI state is kept per channel, so instead of keeping an array of ANI states with an arbitrary size of 255, move the ANI state into the channel struct. Move some config settings that are not per-channel out of the per-channel struct to save some memory. With those changes, ath9k_ani_restart_old and ath9k_ani_restart_new can be merged into a single function. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k_hw: add a helper function to check for the new ANI implementationFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k_hw: clean up register write bufferingFelix Fietkau
Throughout the code, DISABLE_REGWRITE_BUFFER is always called right after REGWRITE_BUFFER_FLUSH. Since that's unlikely to change any time soon, that makes keeping those ops separate rather pointless, as it only increases code size and line number counts. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k_hw: merge codepaths that access the cycle counter registersFelix Fietkau
The cycle counters are used by ANI to determine the amount of time that the radio spent not receiving or transmitting. They're also used for debugging purposes if the baseband watchdog on AR9003 detects a lockup. In the future, we want to use these counters to determine the medium utilization and export this information via survey. For that, we need to make sure that the counter is only accessed from one place, which also ensures that wraparounds won't occur at inconvenient points in time. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k_hw: clean up calibration flagsFelix Fietkau
The calibration actual calibration flags are only used by the per chip family source files, so it makes more sense to define them in those files instead of globally. That way the code has to test for less flags. Also instead of using a separate callback for testing whether a particular calibration type is supported, simply adjust ah->supp_cals in the calibration init which is called right after the hardware reset, before any of the calibrations are run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-06Merge branch 'vhost-net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-10-06ath9k_hw: fix regression in ANI listen time calculationFelix Fietkau
wireless-testing commit 37e5bf6535a4d697fb9fa6f268a8354a612cbc00 Author: Luis R. Rodriguez <lrodriguez@atheros.com> Date: Sat Jun 12 00:33:40 2010 -0400 ath9k_hw: fix clock rate calculations for ANI This commit accidentally broke clock rate calculation by doubling the calculated clock rate Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06iwlagn: define 130 series of WiFi/BT combo devicesWey-Yi Guy
add new structures and defines need to identify 130 devices. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: rename iwl5000_tx_respWey-Yi Guy
iwl5000_tx_resp really should be iwlagn_tx_resp, rename it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlwifi: remove uncorrect commentsWey-Yi Guy
some structure belong to _agn devices, not just 5000. Fix it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: rename iwl5000_tx_power_dbm_cmdWey-Yi Guy
iwl5000_tx_power_dbm_cmd really should be iwlagn_tx_power_dbm_cmd, so rename it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-17 11:57:05 +0000