summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-05-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tg3.c
2011-05-05Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-05-05can: fix SJA1000 dlc for RTR packetsKurt Van Dijck
RTR frames do have a valid data length code on CAN. The driver for SJA1000 did not handle that situation properly. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05net: call dev_alloc_name from register_netdeviceJiri Pirko
Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05bnx2x: function descriptions format fixedDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05bnx2x: update year to 2011 and version to 1.62.12-0Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05bnx2x: improve memory handling, low memory recovery flowsDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05bnx2x: Do storage mac address validation for SF mode.Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05bnx2x: allow WoL on every function in MF modesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05bnx2x: link report improvementsVladislav Zolotarov
To avoid link notification duplication Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05stmmac: removed not used definitionsGiuseppe CAVALLARO
Reported-by: Karim Hamiti <karim.hamiti@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05usbnet: runtime pm: fix out of memoryMing Lei
This patch makes use of the EVENT_DEV_OPEN flag introduced recently to fix one out of memory issue, which can be reproduced on omap3/4 based pandaboard/beagle XM easily with steps below: - enable runtime pm echo auto > /sys/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.1/power/control - ifconfig eth0 up - then out of memroy happened, see [1] for kernel message. Follows my analysis: - 'ifconfig eth0 up' brings eth0 out of suspend, and usbnet_resume is called to schedule dev->bh, then rx urbs are submited to prepare for recieving data; - some usbnet devices will produce garbage rx packets flood if info->reset is not called in usbnet_open. - so there is no enough chances for usbnet_bh to handle and release recieved skb buffers since many rx interrupts consumes cpu, so out of memory for atomic allocation in rx_submit happened. This patch fixes the issue by simply not allowing schedule of usbnet_bh until device is opened. [1], dmesg [ 234.712005] smsc95xx 1-1.1:1.0: rpm_resume flags 0x4 [ 234.712066] usb 1-1.1: rpm_resume flags 0x0 [ 234.712066] usb 1-1: rpm_resume flags 0x0 [ 234.712097] usb usb1: rpm_resume flags 0x0 [ 234.712127] usb usb1: usb auto-resume [ 234.712158] ehci-omap ehci-omap.0: resume root hub [ 234.754028] hub 1-0:1.0: hub_resume [ 234.754821] hub 1-0:1.0: port 1: status 0507 change 0000 [ 234.756011] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 234.756042] hub 1-0:1.0: rpm_resume flags 0x4 [ 234.756072] usb usb1: rpm_resume flags 0x0 [ 234.756164] usb usb1: rpm_resume returns 1 [ 234.756195] hub 1-0:1.0: rpm_resume returns 0 [ 234.756195] hub 1-0:1.0: rpm_suspend flags 0x4 [ 234.756225] hub 1-0:1.0: rpm_suspend returns 0 [ 234.756256] usb usb1: rpm_resume returns 0 [ 234.757141] usb 1-1: usb auto-resume [ 234.793151] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 234.816558] usb 1-1: finish resume [ 234.817871] hub 1-1:1.0: hub_resume [ 234.818420] hub 1-1:1.0: port 1: status 0507 change 0000 [ 234.820495] ehci-omap ehci-omap.0: reused qh eec50220 schedule [ 234.820495] usb 1-1: link qh256-0001/eec50220 start 1 [1/0 us] [ 234.820587] usb 1-1: rpm_resume returns 0 [ 234.820800] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000 [ 234.820800] hub 1-1:1.0: rpm_resume flags 0x4 [ 234.820831] hub 1-1:1.0: rpm_resume returns 0 [ 234.820861] hub 1-1:1.0: rpm_suspend flags 0x4 [ 234.820861] hub 1-1:1.0: rpm_suspend returns 0 [ 234.821777] usb 1-1.1: usb auto-resume [ 234.868591] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002 [ 234.868591] hub 1-1:1.0: rpm_resume flags 0x4 [ 234.868621] hub 1-1:1.0: rpm_resume returns 0 [ 234.868652] hub 1-1:1.0: rpm_suspend flags 0x4 [ 234.868652] hub 1-1:1.0: rpm_suspend returns 0 [ 234.879486] usb 1-1.1: finish resume [ 234.880279] usb 1-1.1: rpm_resume returns 0 [ 234.880310] smsc95xx 1-1.1:1.0: rpm_resume returns 0 [ 238.880187] ksoftirqd/0: page allocation failure. order:0, mode:0x20 [ 238.880218] Backtrace: [ 238.880249] [<c01b9800>] (dump_backtrace+0x0/0xf8) from [<c065e1dc>] (dump_stack+0x18/0x1c) [ 238.880249] r6:00000000 r5:00000000 r4:00000020 r3:00000002 [ 238.880310] [<c065e1c4>] (dump_stack+0x0/0x1c) from [<c026ece4>] (__alloc_pages_nodemask+0x620/0x724) [ 238.880340] [<c026e6c4>] (__alloc_pages_nodemask+0x0/0x724) from [<c02986d4>] (kmem_getpages.clone.34+0x34/0xc8) [ 238.880371] [<c02986a0>] (kmem_getpages.clone.34+0x0/0xc8) from [<c02988f8>] (cache_grow.clone.42+0x84/0x154) [ 238.880371] r6:ef871aa4 r5:ef871a80 r4:ef81fd40 r3:00000020 [ 238.880401] [<c0298874>] (cache_grow.clone.42+0x0/0x154) from [<c0298b64>] (cache_alloc_refill+0x19c/0x1f0) [ 238.880432] [<c02989c8>] (cache_alloc_refill+0x0/0x1f0) from [<c0299804>] (kmem_cache_alloc+0x90/0x190) [ 238.880462] [<c0299774>] (kmem_cache_alloc+0x0/0x190) from [<c052e260>] (__alloc_skb+0x34/0xe8) [ 238.880493] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet]) [ 238.880523] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf050d38>] (rx_complete+0x19c/0x1b0 [usbnet]) [ 238.880737] [<bf050b9c>] (rx_complete+0x0/0x1b0 [usbnet]) from [<bf006fd0>] (usb_hcd_giveback_urb+0xa8/0xf4 [usbcore]) [ 238.880737] r8:eeeced34 r7:eeecec00 r6:eeecec00 r5:00000000 r4:eec2dd20 [ 238.880767] r3:bf050b9c [ 238.880859] [<bf006f28>] (usb_hcd_giveback_urb+0x0/0xf4 [usbcore]) from [<bf03c8f8>] (ehci_urb_done+0xb0/0xbc [ehci_hcd]) [ 238.880859] r6:00000000 r5:eec2dd20 r4:eeeced44 r3:eec2dd34 [ 238.880920] [<bf03c848>] (ehci_urb_done+0x0/0xbc [ehci_hcd]) from [<bf040204>] (qh_completions+0x308/0x3bc [ehci_hcd]) [ 238.880920] r7:00000000 r6:eeda21a0 r5:ffdfe3c0 r4:eeda21ac [ 238.880981] [<bf03fefc>] (qh_completions+0x0/0x3bc [ehci_hcd]) from [<bf040ef8>] (scan_async+0xb0/0x16c [ehci_hcd]) [ 238.881011] [<bf040e48>] (scan_async+0x0/0x16c [ehci_hcd]) from [<bf040fec>] (ehci_work+0x38/0x90 [ehci_hcd]) [ 238.881042] [<bf040fb4>] (ehci_work+0x0/0x90 [ehci_hcd]) from [<bf042940>] (ehci_irq+0x300/0x34c [ehci_hcd]) [ 238.881072] r4:eeeced34 r3:00000001 [ 238.881134] [<bf042640>] (ehci_irq+0x0/0x34c [ehci_hcd]) from [<bf006828>] (usb_hcd_irq+0x40/0xac [usbcore]) [ 238.881195] [<bf0067e8>] (usb_hcd_irq+0x0/0xac [usbcore]) from [<c0239764>] (handle_irq_event_percpu+0xb8/0x240) [ 238.881225] r6:eec504e0 r5:0000006d r4:eec504e0 r3:bf0067e8 [ 238.881256] [<c02396ac>] (handle_irq_event_percpu+0x0/0x240) from [<c0239930>] (handle_irq_event+0x44/0x64) [ 238.881256] [<c02398ec>] (handle_irq_event+0x0/0x64) from [<c023bbd0>] (handle_level_irq+0xe0/0x114) [ 238.881286] r6:0000006d r5:c080c14c r4:c080c100 r3:00020000 [ 238.881317] [<c023baf0>] (handle_level_irq+0x0/0x114) from [<c01ab090>] (asm_do_IRQ+0x90/0xd0) [ 238.881317] r5:00000000 r4:0000006d [ 238.881347] [<c01ab000>] (asm_do_IRQ+0x0/0xd0) from [<c06624d0>] (__irq_svc+0x50/0x134) [ 238.881378] Exception stack(0xef837e20 to 0xef837e68) [ 238.881378] 7e20: 00000001 00185610 016cc000 c00490c0 eb380000 ef800540 00000020 00004ae0 [ 238.881408] 7e40: 00000020 bf0509f4 60000013 ef837e9c ef837e40 ef837e68 c0226f0c c0298ca0 [ 238.881408] 7e60: 20000013 ffffffff [ 238.881408] r5:fa240100 r4:ffffffff [ 238.881439] [<c0298bb8>] (__kmalloc_track_caller+0x0/0x1d0) from [<c052e284>] (__alloc_skb+0x58/0xe8) [ 238.881469] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet]) [ 238.881500] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf0513d8>] (usbnet_bh+0x1b4/0x250 [usbnet]) [ 238.881530] [<bf051224>] (usbnet_bh+0x0/0x250 [usbnet]) from [<c01f912c>] (tasklet_action+0xb0/0x1f8) [ 238.881530] r6:00000000 r5:ef9757f0 r4:ef9757ec r3:bf051224 [ 238.881561] [<c01f907c>] (tasklet_action+0x0/0x1f8) from [<c01f97ac>] (__do_softirq+0x140/0x290) [ 238.881561] r8:00000006 r7:00000101 r6:00000000 r5:c0806098 r4:00000001 [ 238.881591] r3:c01f907c [ 238.881622] [<c01f966c>] (__do_softirq+0x0/0x290) from [<c01f99cc>] (run_ksoftirqd+0xd0/0x1f4) [ 238.881622] [<c01f98fc>] (run_ksoftirqd+0x0/0x1f4) from [<c02113b0>] (kthread+0x90/0x98) [ 238.881652] r7:00000013 r6:c01f98fc r5:00000000 r4:ef831efc [ 238.881683] [<c0211320>] (kthread+0x0/0x98) from [<c01f62f4>] (do_exit+0x0/0x374) [ 238.881713] r6:c01f62f4 r5:c0211320 r4:ef831efc [ 238.881713] Mem-info: [ 238.881744] Normal per-cpu: [ 238.881744] CPU 0: hi: 186, btch: 31 usd: 38 [ 238.881744] CPU 1: hi: 186, btch: 31 usd: 169 [ 238.881774] HighMem per-cpu: [ 238.881774] CPU 0: hi: 90, btch: 15 usd: 66 [ 238.881774] CPU 1: hi: 90, btch: 15 usd: 86 [ 238.881805] active_anon:544 inactive_anon:71 isolated_anon:0 [ 238.881805] active_file:926 inactive_file:2538 isolated_file:0 [ 238.881805] unevictable:0 dirty:10 writeback:0 unstable:0 [ 238.881805] free:57782 slab_reclaimable:864 slab_unreclaimable:186898 [ 238.881805] mapped:632 shmem:144 pagetables:50 bounce:0 [ 238.881835] Normal free:1328kB min:3532kB low:4412kB high:5296kB active_anon:0kB inactive_anon:0kB active_file:880kB inactive_file:848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:780288kB mlocked:0kB dirty:36kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:3456kB slab_unreclaimable:747592kB kernel_stack:392kB pagetables:200kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 238.881866] lowmem_reserve[]: 0 1904 1904 [ 238.881896] HighMem free:229800kB min:236kB low:508kB high:784kB active_anon:2176kB inactive_anon:284kB active_file:2824kB inactive_file:9304kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:243712kB mlocked:0kB dirty:4kB writeback:0kB mapped:2528kB shmem:576kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 238.881927] lowmem_reserve[]: 0 0 0 [ 238.881958] Normal: 0*4kB 4*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 2*512kB 0*1024kB 0*2048kB 0*4096kB = 1344kB [ 238.882019] HighMem: 6*4kB 2*8kB 4*16kB 4*32kB 1*64kB 1*128kB 0*256kB 2*512kB 3*1024kB 0*2048kB 55*4096kB = 229800kB [ 238.882080] 3610 total pagecache pages [ 238.882080] 0 pages in swap cache [ 238.882080] Swap cache stats: add 0, delete 0, find 0/0 [ 238.882110] Free swap = 0kB [ 238.882110] Total swap = 0kB [ 238.933776] 262144 pages of RAM [ 238.933776] 58240 free pages [ 238.933776] 10503 reserved pages [ 238.933776] 187773 slab pages [ 238.933807] 2475 pages shared [ 238.933807] 0 pages swap cached Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-05-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-05-04ixgbe: Cleanup PCIe bus speed infoDon Skidmore
PCIe connections should be expressed as GT/s (GigaTransfers per second) instead of the current Gb/s (Gigabits per second). In addition, it is incorrect because (due to PCIe gen 1 & 2 having a 20% overhead) the actually data rate, when expressed in Gb/s, is only 80% of the rate of GT/s. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: improve EEPROM read/write operationsEmil Tantilov
Introduce buffered read/writes which greatly improves performance on parts with large EEPROMs. Previously reading/writing a word requires taking/releasing of synchronization semaphores which adds 10ms to each operation. The optimization is to read/write in buffers, but make sure the semaphore is not held for >500ms according to the datasheet. Since we can't read the EEPROM page size ixgbe_detect_eeprom_page_size() is used to discover the EEPROM size when needed and keeps the result in word_page_size for the rest of the run time. Use buffered reads for ethtool -e. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: fix sparse warningEmil Tantilov
warning: symbol 'before' shadows an earlier one Convert large macros to functions similar to e1000e. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: fix typo error with software defined pins on 82599Don Skidmore
Correcting a simple typo with enabling software defined pins. I don't believe this was causing any issues but this is how it was meant to be implemented. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: Use function pointer for ixgbe_acquire/release_swfw_sync()Emil Tantilov
Change remaining direct calls to function pointers. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04igbvf: remove bogus phys_idstephen hemminger
This device lies about supporting phys_id. Remove it and just let the upper layer report not supported. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04igb: Add check for invalid size to igb_get_invariants_82575()Carolyn Wyborny
Recent commits have changed how EEPROM size is checked and if the size word is misconfigured, the driver will fail to load. This patch adds a check for invalid size word in the EEPROM and uses default size instead for 82576 parts. Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgb: convert to set_phys_idJeff Kirsher
Based on the original patch sent by Stephen Hemminger. This version incorporates the ethtool changes that Bruce Allan submitted. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com>
2011-05-04e100: fix build warningEmil Tantilov
In function 'e100_hw_init': warning: 'err' may be used uninitialized in this function Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-03libcxgbi: Use flowi4's saddr in cxgbi_check_route().David S. Miller
Instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-03pptp: Use flowi4's daddr/saddr in pptp_xmit().David S. Miller
Instead of rt->rt_{src,dst} Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-03ipv4: Make caller provide on-stack flow key to ip_route_output_ports().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-03net/stmmac: Move "#include <linux/platform_device.h>" to linux/stmmac.hViresh KUMAR
stmmac.h uses struct platform_device and doesn't include <linux/platform_device.h>. Whereas drivers/net/stmmac/stmmac.h includes it, but doesn't directly use it. And so we get following compilation warning while using this file: warning: ‘struct platform_device’ declared inside parameter list This patch includes <linux/platform_device.h> in linux/stmmac.h and removes it from drivers/net/stmmac/stmmac.h Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-02Revert: veth: remove unneeded ifname code from veth_newlink()Jiri Pirko
84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 ("veth: remove unneeded ifname code from veth_newlink()") caused regression on veth creation. This patch reverts the original one. Reported-by: Michał Mirosław <mirqus@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-02smsc95xx: fix reset checkRabin Vincent
The reset loop check should check the MII_BMCR register value for BMCR_RESET rather than for MII_BMCR (the register address, which also happens to be zero). Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-02tg3: Fix failure to enable WoL by default when possibleRafael J. Wysocki
tg3 is supposed to enable WoL by default on adapters which support that, but it fails to do so unless the adapter's /sys/devices/.../power/wakeup file contains 'enabled' during the initialization of the adapter. Fix that by making tg3 use device_set_wakeup_enable() to enable wakeup automatically whenever WoL should be enabled by default. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-02amd8111e: trivial typo spelling: Negotitate -> NegotiateJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-05-02mwifiex: fix missing tsf_val TLVBing Zhao
In mwifiex_cmd_append_tsf_tlv(), two tsf_val TLVs should be filled in the buffer and then sent to firmware. The missing first TLV for tsf_val is added back in this patch. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rtlwifi: Fix typo in pci.cLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Add autowake support for USB hardwareIvo van Doorn
The USB drivers don't support automatically waking up when in powersaving mode, add a work object which will wakeup the device in time to receive the next beacon. Based on that beacon, we either go back into powersaving mode, or we remain awake to receive the buffered frames for our station. Some part of the code, especially rt2x00lib_find_ie and rt2x00lib_rxdone_check_ps are inspired on the code from carl9170. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Introduce capability flag for Bluetooth co-existence.Gertjan van Wingerde
Use flag instead of re-reading the eeprom every time. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Streamline rt2800 eeprom initialisations.Gertjan van Wingerde
In rt2800lib.c the rt2800_init_eeprom function the same eeprom words were read multiple times, due to inefficient ordering of the eeprom checks. Reorder the checks so that each EEPROM word only has to be read once. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Fix optimize register access for rt2800pciIvo van Doorn
The patch rt2x00: Optimize register access in rt2800pci from Helmut Schaa missed one register call, namely the rt2800_register_multiwrite which should be changed to rt2x00pci_register_multiwrite. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Optimize TX_STA_FIFO register readingIvo van Doorn
Add recycling functionality to rt2x00usb_register_read_async. When the callback function returns true, resubmit the urb to read the register again. This optimizes the rt2800usb driver when multiple TX status reports are pending in the register, because now we don't need to allocate the rt2x00_async_read_data and urb structure each time. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Reduce tx status reading timeoutIvo van Doorn
When no TX status was available, the default timeout of 20ms is a bit high. The frame is highly likely already send out, so the TX status should be available within only a few milliseconds. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02ssb: cc: prepare clockmode support for cores rev 10+Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-30iwlagn: remove un-necessary debugfs callbackWey-Yi Guy
After driver split, no need for debugfs callback, remove those Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: prefer BSS contextJohannes Berg
If an interface type changes from a type that is only supported on the PAN context (e.g. P2P GO) to a type that is supported on the BSS context, and the BSS context is not in use, then we need to use the BSS context instead of changing the device type within the context. To achieve this, refuse the type change, which causes a down/up cycle that will allocate the BSS context for the interface. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: improve RXON checkingJohannes Berg
The current RXON checking doesn't verify that the channel is valid (or at least non-zero), so add that. Also, add a WARN() so we get a stacktrace, and capture a bitmask of errors in order to capture all necessary information in the warning itself (in case the previous messages are snipped off.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: remove spectrum measurement headerJohannes Berg
This header file isn't used, and if we ever need these definitions they shouldn't be added to a driver but rather to the common 802.11 include file that has all frame definitions. Thus, just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: semaphore and calib cleanupDon Fry
All agn devices use the same eeprom semaphore and calib version routines. Delete the indirection and move the semaphore routines to where they are used and make static. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: mod param cleanupDon Fry
All agn devices use the same module parameter structure. Delete the indirection and access the structure diretly. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: new 105 series deviceWey-Yi Guy
Correction for new 105 series devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: use proper good CRC threshold behaviourJohannes Berg
New microcode versions use the good CRC threshold field differently, as a flag, and in that case we should set it to 1/0 instead of 1/65535 for an active/passive scan. The new behaviour is advertised by the uCode with a feature flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: connect and disconnect sequence for RXONWey-Yi Guy
No functional changes, separate the connect and disconnect sequences in RXON commit function, easier to read and understand. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 17:42:36 +0000