summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2010-08-14hwmon: (w83627ehf) Driver cleanupGuenter Roeck
- Moved fan pwm register array pointers into per-instance data. - Only read fan pwm data for installed/supported fans. - Update fan max output and fan step output information from data in registers. - Create max_output and step_output attribute files only if respective fan pwm registers exist. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controllerSteve Glendinning
SMSC's EMC2103 family of temperature/fan controllers have 1 onboard and up to 3 external temperature sensors, and allow closed-loop control of one fan. This patch adds support for them. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14hwmon: (asc7621) Clean up and improve detect functionJean Delvare
* The dev variable is never used. * Detect functions only need to set info->type, not client->name. * Include the device address in the log message. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: George Joseph <george.joseph@fairview5.com> Cc: Ken Milmore <ken.milmore@googlemail.com>
2010-08-14hwmon: (it87) Export labels for internal sensorsJean Delvare
Some voltage sensors can be wired internally to the IT87xxF chip's own power supply channels. In that case, we can inform user-space that the wiring is known by exporting proper labels for these sensors. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14hwmon: (lm75) Add suspend/resume featureShubhrajyoti Datta
There is a shutdown feature at suspend it can be enabled to reduce current consumption and resume it can be switched off. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti@ti.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14hwmon: (emc1403) Add power supportAlan Cox
Add back the power interface we lost due to a slight misunderstanding of the maintainers wishes. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14hwmon: (ltc4245) Expose all GPIO pins as analog voltagesIra W. Snyder
Add support for exposing all GPIO pins as analog voltages. Though this is not an ideal use of the chip, some hardware engineers may decide that the LTC4245 meets their design requirements when studying the datasheet. The GPIO pins are sampled in round-robin fashion, meaning that a slow reader will see stale data. A userspace application can detect this, because it will get -EAGAIN when reading from a sysfs file which contains stale data. Users can choose to use this feature on a per-chip basis by using either platform data or the OF device tree (where applicable). Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14hwmon: (pc87360) Fix device resource declarationJean Delvare
It's not OK to call platform_device_add_resources() multiple times in a row. Despite its name, this functions sets the resources, it doesn't add them. So we have to prepare an array with all the resources, and then call platform_device_add_resources() once. Before this fix, only the last I/O resource would be actually registered. The other I/O resources were leaked. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: stable@kernel.org
2010-08-14hwmon: (k8temp) Adjust confusing if indentationJulia Lawall
Move the if(err) statement after the if into the if branch indicated by its indentation. The preceding if(err) test implies that err cannot be nonzero unless the if branch is taken. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces5@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p4) cocci.print_secs("after",p5) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-13Merge branch 'msm-mmc_sdcc' of ↵Linus Torvalds
git://codeaurora.org/quic/kernel/dwalker/linux-msm * 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: mmc: msm_sdcc: Rename config MMC_MSM7X00A to MMC_MSM mmc: msm_sdcc: Compile the driver for msm7x30 mmc: msm: fix up build breakage on !PM
2010-08-13Merge branch 'stable/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6 * 'stable/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6: firmware: ibft depends on SCSI ibft: Kernel oops when rmmoding iscsi_ibft with no iBFT present.
2010-08-13Merge git://git.infradead.org/~dwmw2/ideapad-2.6Linus Torvalds
* git://git.infradead.org/~dwmw2/ideapad-2.6: Call acpi_video_register() in intel_opregion_init() failure path ideapad: Only allow camera state to be set to 0 or 1 ideapad: Stop using global variables Add Lenovo ideapad driver
2010-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: hpwdt (12/12): Make NMI decoding a compile-time option watchdog: hpwdt (11/12): move NMI-decoding init and exit to seperate functions watchdog: hpwdt (10/12): Use "decoding" instead of "sourcing" watchdog: hpwdt (9/12): hpwdt_pretimeout reorganization watchdog: hpwdt (8/12): implement WDIOC_GETTIMELEFT watchdog: hpwdt (7/12): allow full range of timer values supported by hardware watchdog: hpwdt (6/12): Introduce SECS_TO_TICKS() macro watchdog: hpwdt (5/12): Make x86 assembly ifdef guard more strict watchdog: hpwdt (4/12): Despecificate driver from iLO2 watchdog: hpwdt (3/12): Group NMI sourcing specific items together watchdog: hpwdt (2/12): Group options that affect watchdog behavior together watchdog: hpwdt (1/12): clean-up include-files.
2010-08-13Merge branch 'bkl/ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: bkl: Remove locked .ioctl file operation v4l: Remove reference to bkl ioctl in compat ioctl handling logfs: kill BKL
2010-08-13pcmcia: xirc2ps_cs bugfixDominik Brodowski
We need to set io_lines to 10 unconditionally. Reported-by: Komuro <komurojun-mbn@nifty.com> CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-14v4l: Remove reference to bkl ioctl in compat ioctl handlingFrederic Weisbecker
There are no more users of struct file_operations:ioctl. These can be safely removed. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Hans Verkuil <hverkuil@xs4all.nl>
2010-08-13watchdog: hpwdt (12/12): Make NMI decoding a compile-time optiondann frazier
hpwdt is quite functional without the NMI decoding feature. This change lets users disable the NMI portion at compile-time via the new HPWDT_NMI_DECODING config option. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (11/12): move NMI-decoding init and exit to seperate functionsdann frazier
Move NMI-decoding initialisation and exit code to seperate functions so that we can ifdef-out parts of it in the future. Also, this is for a device, so let's use dev_info instead of printk. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (10/12): Use "decoding" instead of "sourcing"dann frazier
The term "decoding" more clearly explains what hpwdt is doing. It isn't just finding the source of the interrupt, but rather aids in decoding what the interrupt means. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (9/12): hpwdt_pretimeout reorganizationdann frazier
Reorganize this function to remove excess indentation and highlight the single return code. (No functional change). Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (8/12): implement WDIOC_GETTIMELEFTdann frazier
Let applications check the amount of time left before the watchdog will fire. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (7/12): allow full range of timer values supported by hardwaredann frazier
The hpwdt timer is a 16 bit value with 128ms resolution. Let applications use this entire range. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (6/12): Introduce SECS_TO_TICKS() macrodann frazier
Define a macro to convert from seconds to timer ticks. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (5/12): Make x86 assembly ifdef guard more strictdann frazier
The 32-bit assembly is guarded by an #ifndef CONFIG_X86_64. Kconfig prevents us from building this driver on !X86, so that happens to suffice - but we should really lock it down to #ifdef CONFIG_X86_32. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (4/12): Despecificate driver from iLO2dann frazier
This driver supports both iLO2 and iLO3, but our user-visible strings currently only reference iLO2. Let's just call it "iLO2+" to avoid having to update strings for each iLO generation. This driver doesn't support iLO ASICs prior to iLO2, but that is sufficiently explained in Kconfig. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (3/12): Group NMI sourcing specific items togetherdann frazier
* Group together includes specific to NMI sourcing * Group defines only used by NMI sourcing together * Group declarations specific to NMI sourcing together This gives a clean seperation of watchdog specific items and NMI sourcing specific items (which is needed for making it possible to build hpwdt without the NMI functionality). Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (2/12): Group options that affect watchdog behavior togetherdann frazier
Reorganization only. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13watchdog: hpwdt (1/12): clean-up include-files.dann frazier
* remove unnecessary includes * We use a spinlock, but lacked the include * We need bitops.h for test_and_set_bit/clear_bit Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-08-13Input: fix faulty XXinput_* callsDaniel Mack
They've been introduced by 987a6c02 ("Input: switch to input_abs_*() access functions") and they appear to be some kind of debug left-over. [Dmitry Torokhov: these are my fault - I added XX prefixes in places where I wanted to do additional review of the code but failed to actually do that in these particular instances.] Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] partitions: fix build error in ibm partition detection code [S390] appldata: fix dev_get_stats 64 bit conversion [S390] wire up prlimit64 and fanotify* syscalls [S390] zcrypt: fix Kconfig dependencies [S390] sys_personality: follow u_long to unsigned int conversion [S390] dasd: fix format string types
2010-08-13Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: v4l2-ctrls.c: needs to include slab.h V4L/DVB: fix Kconfig to depends on VIDEO_IR V4L/DVB: Fix IR_CORE dependencies
2010-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) ctcm: rename READ/WRITE defines to avoid redefinitions claw: rename READ/WRITE defines to avoid redefinitions phylib: available for any speed ethernet can: add limit for nframes and clean up signed/unsigned variables pkt_sched: Check .walk and .leaf class handlers pkt_sched: Fix sch_sfq vs tc_modify_qdisc oops caif-spi: Bugfix SPI_DATA_POS settings were inverted. caif: Bugfix - Increase default headroom size for control channel. net: make netpoll_rx return bool for !CONFIG_NETPOLL Bluetooth: Use 3-DH5 payload size for default ERTM max PDU size Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM Bluetooth: Change default L2CAP ERTM retransmit timeout Bluetooth: Fix endianness issue with L2CAP MPS configuration net: Use NET_XMIT_SUCCESS where possible. isdn: mISDN: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed usbnet: rx_submit() should return an error code. pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles ...
2010-08-13[S390] zcrypt: fix Kconfig dependenciesHeiko Carstens
warning: (ZCRYPT && CRYPTO && CRYPTO_HW && S390 && ZCRYPT=y) selects ZCRYPT_MONOLITHIC which has unmet direct dependencies (ZCRYPT=m) ZCRYPT_MONOLITHIC should not depend on ZCRYPT="m" when it gets selected if ZCRYPT="y". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-13[S390] dasd: fix format string typesHeiko Carstens
Get rid of these warnings: drivers/s390/block/dasd.c: In function '__dasd_device_check_expire': drivers/s390/block/dasd.c:1330: warning: format '%i' expects type 'int', but argument 4 has type 'long unsigned int' drivers/s390/block/dasd.c:1337: warning: format '%i' expects type 'int', but argument 4 has type 'long unsigned int' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-13Call acpi_video_register() in intel_opregion_init() failure pathDavid Woodhouse
If i915 opregion is present, the acpi_video driver doesn't register itself immediately; it defers that until the i915 opregion code is done. But if that *fails*, the acpi_video driver was never getting registered. And thus I have no backlight support on my Lenovo IdeaPad S10-3. Call acpi_video_register() on the failure path, and it works again. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Matthew Garrett <mjg@redhat.com>
2010-08-12ctcm: rename READ/WRITE defines to avoid redefinitionsUrsula Braun
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to CTCM_READ/CTCM_WRITE to avoid warnings. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-12claw: rename READ/WRITE defines to avoid redefinitionsHeiko Carstens
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to READ_CHANNEL/WRITE_CHANNEL which should suffice. Fixes this: In file included from drivers/s390/net/claw.c:93: drivers/s390/net/claw.h:78:1: warning: "WRITE" redefined In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/debug.h:12, from drivers/s390/net/claw.c:68: include/linux/fs.h:156:1: warning: this is the location of the previous definition Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-12V4L/DVB: v4l2-ctrls.c: needs to include slab.hRandy Dunlap
v4l2-ctrls.c needs to include slab.h to prevent build errors: drivers/media/video/v4l2-ctrls.c:766: error: implicit declaration of function 'kzalloc' drivers/media/video/v4l2-ctrls.c:786: error: implicit declaration of function 'kfree' drivers/media/video/v4l2-ctrls.c:1528: error: implicit declaration of function 'kmalloc' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-12V4L/DVB: fix Kconfig to depends on VIDEO_IRMauro Carvalho Chehab
warning: (VIDEO_BT848 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT || VIDEO_SAA7134 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && VIDEO_DEV && PCI && I2C && INPUT || VIDEO_CX88 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && VIDEO_DEV && PCI && I2C && INPUT || VIDEO_IVTV && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && PCI && I2C && INPUT || VIDEO_CX18 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL && INPUT || VIDEO_EM28XX && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT || VIDEO_TLG2300 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT && SND && DVB_CORE || VIDEO_CX231XX && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT || DVB_BUDGET_CI && MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && DVB_BUDGET_CORE && I2C && INPUT || DVB_DM1105 && MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && PCI && I2C && INPUT || VIDEO_GO7007 && STAGING && !STAGING_EXCLUDE_BUILD && VIDEO_DEV && PCI && I2C && INPUT && SND || VIDEO_CX25821 && STAGING && !STAGING_EXCLUDE_BUILD && DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT) selects VIDEO_IR which has unmet direct dependencies (IR_CORE) Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-12V4L/DVB: Fix IR_CORE dependenciesMauro Carvalho Chehab
As pointed by Randy Dunlap <randy.dunlap@oracle.com>: > ERROR: "ir_keydown" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_repeat" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_keydown" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "ir_g_keycode_from_table" [drivers/media/IR/ir-common.ko] undefined! > > > #5101: > (.text+0x8306e2): undefined reference to `ir_core_debug' > (.text+0x830729): undefined reference to `ir_core_debug' > ir-functions.c:(.text+0x830906): undefined reference to `ir_core_debug' > (.text+0x8309d8): undefined reference to `ir_g_keycode_from_table' > (.text+0x830acf): undefined reference to `ir_core_debug' > (.text+0x830b92): undefined reference to `ir_core_debug' > (.text+0x830bef): undefined reference to `ir_core_debug' > (.text+0x830c6a): undefined reference to `ir_core_debug' > (.text+0x830cf7): undefined reference to `ir_core_debug' > budget-ci.c:(.text+0x89f5c8): undefined reference to `ir_keydown' > budget-ci.c:(.text+0x8a0c58): undefined reference to `get_rc_map' > budget-ci.c:(.text+0x8a0c80): undefined reference to `__ir_input_register' > budget-ci.c:(.text+0x8a0ee0): undefined reference to `get_rc_map' > budget-ci.c:(.text+0x8a11cd): undefined reference to `ir_input_unregister' > (.text+0x8a8adb): undefined reference to `ir_input_unregister' > dvb-usb-remote.c:(.text+0x8a9188): undefined reference to `get_rc_map' > dvb-usb-remote.c:(.text+0x8a91b1): undefined reference to `__ir_input_register' > dvb-usb-remote.c:(.text+0x8a9238): undefined reference to `get_rc_map' > dib0700_core.c:(.text+0x8b04ca): undefined reference to `ir_keydown' > dib0700_devices.c:(.text+0x8b2ea8): undefined reference to `ir_keydown' > dib0700_devices.c:(.text+0x8b2ef0): undefined reference to `ir_keydown' Those breakages seem to be caused by two bad things at IR_CORE Kconfig: 1) cx23885 is using select for IR_CORE; 2) the dvb-usb and sms dependency for IR_CORE were missing. While here, allow users to un-select IR. Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (33 commits) dm mpath: support discard dm stripe: support discards dm: split discard requests on target boundaries dm stripe: optimize sector division dm stripe: move sector translation to a function dm: error return error for discards dm delay: support discard dm: zero silently drop discards dm: use dm_target_offset macro dm: factor out max_io_len_target_boundary dm: use common __issue_target_request for flush and discard support dm: linear support discard dm crypt: simplify crypt_ctr dm crypt: simplify crypt_config destruction logic dm: allow autoloading of dm mod dm: rename map_info flush_request to target_request_nr dm ioctl: refactor dm_table_complete dm snapshot: implement merge dm: do not initialise full request queue when bio based dm ioctl: make bio or request based device type immutable ...
2010-08-12Merge branch 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds
* 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: msm: mmc: Add msm prefix to platform data structure msm: trout: Remove extern declaration from source file arm: msm: Fix section mismatch in smd.c. arm: msm: trout add mmc support arm: msm: trout: add trout specific gpio interrupts arm: msm: remove unused #include <linux/version.h>
2010-08-12Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: I2C bus multiplexer driver pca954x i2c: Multiplexed I2C bus core support i2c: Use a separate mutex for userspace client lists i2c: Make i2c_default_probe self-sufficient i2c: Drop dummy variable i2c: Move adapter locking helpers to i2c-core V4L/DVB: Use custom I2C probing function mechanism i2c: Add support for custom probe function i2c-dev: Use memdup_user i2c-dev: Remove unnecessary kmalloc casts
2010-08-12Merge branch 'params' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (22 commits) param: don't deref arg in __same_type() checks param: update drivers/acpi/debug.c to new scheme param: use module_param in drivers/message/fusion/mptbase.c ide: use module_param_named rather than module_param_call param: update drivers/char/ipmi/ipmi_watchdog.c to new scheme param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes. param: lock myri10ge_fw_name against sysfs changes. param: simple locking for sysfs-writable charp parameters param: remove unnecessary writable charp param: add kerneldoc to moduleparam.h param: locking for kernel parameters param: make param sections const. param: use free hook for charp (fix leak of charp parameters) param: add a free hook to kernel_param_ops. param: silence .init.text references from param ops Add param ops struct for hvc_iucv driver. nfs: update for module_param_named API change AppArmor: update for module_param_named API change param: use ops in struct kernel_param, rather than get and set fns directly param: move the EXPORT_SYMBOL to after the definitions. ...
2010-08-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (22 commits) regulator: Remove default DEBUG define from TPS6586x regulator: tps6507x - add missing platform_set_drvdata in tps6507x_pmic_probe regulator: tps6586x - add regulator_unregister() in tps6586x_regulator_remove() mfd: max8998 - fix incorrect kfree(i2c) in i2c_driver probe callback handler regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write() regulator: max8660 - fix a memory leak in max8660_remove() regulator: max1586 - fix a memory leak in max1586_pmic_remove() regulator: Default GPIO controlled WM8994 regulators to disabled regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write() max8998: fix off-by-one value range checking regulator: tps6586x: fix millivolt return values and SM2 table regulator: tps6586x: add dependancy on MFD_TPS6585x regulator: add TPS6586X regulator driver regulator: MAX8998: set_voltage bugfix. ramp_up delay and min/max voltage regulator: add support for regulators on the ab8500 MFD ab8500-mfd: add regulator support to ab8500 mfd device tps65023: Allow registering similar TPS65021 drivers: regulators: depend on MFD_MAX8998 drivers: regulator: add Maxim 8998 driver ISL6271A voltage regulator support. ...
2010-08-12Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (40 commits) mfd: Fix incorrect kfree(i2c) in wm8994-core i2c_driver probe mfd: Fix incorrect kfree(i2c) in wm831x-core i2c_driver probe mfd: Fix incorrect kfree(i2c) in tps6507x i2c_driver probe mfd: Add TPS6586x driver mfd: Use macros instead of some constant magic numbers for menelaus mfd: Fix menelaus mmc slot 2 misconfiguration mfd: Missing slab.h includes mfd: Fix wrong wm8350-core kfree in error path mfd: Fix wm8994_device_init() return value mfd: Avoid calling platform_device_put() twice in ucb1400 probe error path mfd: Annotate tc6387xb probe/remove routines with __devinit/__devexit mfd: Fix tc6387xb resource reclaim mfd: Fix wrong goto labels for tc6393xb error handling mfd: Get rid of now unused mc13783 private header hwmon: Don't access struct mc13783 directly from mc13783-adc mfd: New mc13783 function exposing flags mfd: Check jz4740-adc kmalloc() result mfd: Fix jz4740-adc resource reclaim in probe error path mfd: Add WM8321 support mfd: Add stmpe auto sleep feature ...
2010-08-12Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: intel_mid_battery: Fix battery scaling intel_mid_battery: Fix the argument order to intel_scu_ipc_command olpc_battery: Fix build failure caused by sysfs changes Add s3c-adc-battery driver Intel MID platform battery driver Fix up trivial conflicts (battery drivers added from different branches) in drivers/power/{Kconfig,Makefile}
2010-08-12Merge branch 'drm-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (55 commits) io-mapping: move asm include inside the config option vgaarb: drop vga.h include drm/radeon: Add probing of clocks from device-tree drm/radeon: drop old and broken mesa warning drm/radeon: Fix pci_map_page() error checking drm: Remove count_lock for calling lastclose() after 58474713 (v2) drm/radeon/kms: allow FG_ALPHA_VALUE on r5xx drm/radeon/kms: another r6xx/r7xx CS checker fix DRM: Replace kmalloc/memset combos with kzalloc drm: expand gamma_set drm/edid: Split mode lists out to their own header for readability drm/edid: Rewrite mode parse to use the generic detailed block walk drm/edid: Add detailed block walk for VTB extensions drm/edid: Add detailed block walk for CEA extensions drm: Remove unused fields from drm_display_info drm: Use ENOENT consistently for the error return for an unmatched handle. drm/radeon/kms: mark 3D power states as performance drm: Only set DPMS once on the CRTC not after every encoder. drm/radeon/kms: add additional quirk for Acer rv620 laptop drm: Propagate error code from fb_create() ... Fix up trivial conflicts in drivers/gpu/drm/drm_edid.c
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-12Merge branch 'stable/xen-swiotlb-0.8.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/xen-swiotlb-0.8.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: x86: Detect whether we should use Xen SWIOTLB. pci-swiotlb-xen: Add glue code to setup dma_ops utilizing xen_swiotlb_* functions. swiotlb-xen: SWIOTLB library for Xen PV guest with PCI passthrough. xen/mmu: inhibit vmap aliases rather than trying to clear them out vmap: add flag to allow lazy unmap to be disabled at runtime xen: Add xen_create_contiguous_region xen: Rename the balloon lock xen: Allow unprivileged Xen domains to create iomap pages xen: use _PAGE_IOMAP in ioremap to do machine mappings Fix up trivial conflicts (adding both xen swiotlb and xen pci platform driver setup close to each other) in drivers/xen/{Kconfig,Makefile} and include/xen/xen-ops.h
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-05 17:31:03 +0000