summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-08-12Merge branch 'staging-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: zcache: Fix build error when sysfs is not defined zcache: Use div_u64 for 64-bit division staging:rts_pstor: fix thread synchronization flow drivers:staging:solo6x10:add the missed slab.h staging: zcache: include module.h for MODULE_LICENSE drivers/staging/hv/blkvsc_drv.c: eliminate NULL pointer dereference Staging: Add clk API note to nvec/TODO drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c: adjust array index staging: more missing slab.h inclusions drivers/staging/solo6x10/p2m.c needs slab.h drivers/staging/solo6x10/core.c needs slab.h drivers/staging/dt3155v4l/dt3155v4l.c needs slab.h drivers/staging/speakup/devsynth.c: fix "buffer size is not provably correct" error Staging: iio: add some unlocks to raw_read() functions staging: ft1000_proc needs asm/io.h for inw/outw on sparc staging: rtl8192u: declare MODULE_FIRMWARE gma500: Fix clashes with DRM updates staging: zcache: module is GPL staging: fix zcache building
2011-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) e1000e: increase driver version number e1000e: alternate MAC address update e1000e: do not disable receiver on 82574/82583 e1000e: alternate MAC address does not work on device id 0x1060 PCnet: Fix section mismatch bnx2x: disable dcb on 578xx since not supported yet bnx2x: properly clean indirect addresses bnx2x: prevent race between undi_unload and load flows bnx2x: fix select_queue when FCoE is disabled bnx2x: init FCOE FP only once ipv4: some rt_iif -> rt_route_iif conversions net/bridge/netfilter/ebtables.c: use available error handling code net/netlabel/netlabel_kapi.c: add missing cleanup code net/irda: sh_sir: tidyup compile warning net/irda: sh_sir: add missing header net/irda: sh_irda: add missing header slcan: ldisc generated skbs are received in softirq context scm: Capture the full credentials of the scm sender tcp: initialize variable ecn_ok in syncookies path drivers/net/wireless/wl1251: add missing kfree ...
2011-08-11Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-08-11e1000e: increase driver version numberBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11e1000e: alternate MAC address updateBruce Allan
If word 0x37 in the EEPROM is 0xFFFF _or_ 0x0000, then there is no alternate MAC address in the EEPROM. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11e1000e: do not disable receiver on 82574/82583Bruce Allan
Due to a hardware erratum, the receiver on 82574 and 82583 should not be stopped once it has been started. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11e1000e: alternate MAC address does not work on device id 0x1060Bruce Allan
This issue is present all the way back to 2.6.34 kernels. CC: <stable@kernel.org> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeffrey Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-08-11Revert "EDAC: Correct Kconfig dependencies"Linus Torvalds
This reverts commit af9d220bac41dc3201893e1601cc7c44f7da4498. It turns out that one was meant to be applied on top of the edac.git tree in -next that has more i7core_edac changes, but that wasn't clear in the original email. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11PCnet: Fix section mismatchRalf Baechle
Building MIPS mtx1_defconfig results in: MODPOST 735 modules WARNING: drivers/net/pcnet32.o(.devinit.text+0x11ec): Section mismatch in reference from the function pcnet32_probe_vlbus.constprop.22() to the variable .init.data:pcnet32_portlist The function __devinit pcnet32_probe_vlbus.constprop.22() references a variable __initdata pcnet32_portlist. If pcnet32_portlist is only used by pcnet32_probe_vlbus.constprop.22 then annotate pcnet32_portlist with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: disable dcb on 578xx since not supported yetDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: properly clean indirect addressesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: prevent race between undi_unload and load flowsDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: fix select_queue when FCoE is disabledVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: init FCOE FP only onceVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/irda: sh_sir: tidyup compile warningKuninori Morimoto
This patch tidyup below warning ${LINUX}/drivers/net/irda/sh_sir.c:514:6: warning: 'val' may be used uninitialized in this function Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/irda: sh_sir: add missing headerKuninori Morimoto
This patch fixup below build error on sh_sir sh_sir.c: In function 'sh_sir_write': sh_sir.c:127:2: error: implicit declaration of function 'iowrite16' sh_sir.c: In function 'sh_sir_read': sh_sir.c:132:2: error: implicit declaration of function 'ioread16' sh_sir.c: At top level: sh_sir.c:561:20: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sh_sir_irq' sh_sir.c: In function 'sh_sir_probe': sh_sir.c:727:2: error: implicit declaration of function 'ioremap_nocache' sh_sir.c:727:16: warning: assignment makes pointer from integer without a cast sh_sir.c:762:2: error: implicit declaration of function 'request_irq' sh_sir.c:762:23: error: 'sh_sir_irq' undeclared (first use in this function) sh_sir.c:762:23: note: each undeclared identifier is reported only once for each function it appears in sh_sir.c:762:35: error: 'IRQF_DISABLED' undeclared (first use in this function) sh_sir.c:776:2: error: implicit declaration of function 'iounmap' sh_sir.c: At top level: sh_sir.c:436:13: warning: 'sh_sir_clear_all_err' defined but not used sh_sir.c:474:12: warning: 'sh_sir_is_which_phase' defined but not used sh_sir.c:490:13: warning: 'sh_sir_tx' defined but not used sh_sir.c:540:13: warning: 'sh_sir_rx' defined but not used Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/irda: sh_irda: add missing headerKuninori Morimoto
This patch fixup below build error on sh_irda sh_irda.c: In function 'sh_irda_write': sh_irda.c:174: error: implicit declaration of function 'iowrite16' sh_irda.c: In function 'sh_irda_read': sh_irda.c:184: error: implicit declaration of function 'ioread16' sh_irda.c: At top level: sh_irda.c:492: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sh_irda_irq' sh_irda.c: In function 'sh_irda_probe': sh_irda.c:776: error: implicit declaration of function 'ioremap_nocache' sh_irda.c:776: warning: assignment makes pointer from integer without a cast sh_irda.c:811: error: implicit declaration of function 'request_irq' sh_irda.c:811: error: 'sh_irda_irq' undeclared (first use in this function) sh_irda.c:811: error: (Each undeclared identifier is reported only once sh_irda.c:811: error: for each function it appears in.) sh_irda.c:811: error: 'IRQF_DISABLED' undeclared (first use in this function) sh_irda.c:825: error: implicit declaration of function 'iounmap' Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11slcan: ldisc generated skbs are received in softirq contextOliver Hartkopp
As this discussion pointed out http://marc.info/?l=linux-netdev&m=131257225602375 netdevices that are based on serial line disciplines should use netif_rx_ni() when pushing received socketbuffers into the netdev rx queue. Following commit 614851601c121b1320a35757ab88292d6272f906 ("slip: fix NOHZ local_softirq_pending 08 warning") this patch updates the slcan driver accordingly. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> CC: Matvejchikov Ilya <matvejchikov@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-10Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: drop experimental status for ARM_PATCH_PHYS_VIRT ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correct ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned access model ARM: 7010/1: mm: fix invalid loop for poison_init_mem ARM: 7005/1: freshen up mm/proc-arm946.S dmaengine: PL08x: Fix trivial build error ARM: Fix build error for SMP=n builds
2011-08-10drivers/net/wireless/wl1251: add missing kfreeJulia Lawall
In each case, the kfree already at the end of the function is also needed in the error case. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10EDAC: Correct Kconfig dependenciesBorislav Petkov
Both AMD and Intel i7 EDAC drivers use MCE features and are thus dependent of this functionality present in the kernel. Express this in Kconfig so that randconfig builds don't break. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09ath5k: fix error handling in ath5k_beacon_sendBob Copeland
This cleans up error handling for the beacon in case of dma mapping failure. We need to free the skb when dma mapping fails instead of nulling and leaking the pointer, and we should bail out to avoid giving the hardware the bad descriptor. Finally, we need to perform the null check after trying to update the beacon, or else beacons will never be sent after a single mapping failure. Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09rt2x00: Add rt2870 device id for Dvico usb keyAnthony Bourguignon
This patch add a device id for the wifi usb keys shiped by DVICO with some of their tvix hardware. Signed-off-by: Anthony Bourguignon <contact+kernel@toniob.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k: fix a misprint which leads to incorrect calibrationAlex Hacker
This patch addresses an issue with incorrect HW register AR_PHY_TX_IQCAL_CORR_COEFF_B1 definition which leads to incorrect clibration. Cc: stable@kernel.org Signed-off-by: Alex Hacker <hacker@epn.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09rt2x00: Add new rt73 buffalo USB idIvo van Doorn
Reported-by: Maik-Holger Freudenberg <hhfeuer@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09rtlwifi: rtl892cu: New USB IDsLarry Finger
This patch fixes several problems in the USB_DEVICE table, including missing IDs, reversed vendor/product codes, and a duplicate ID. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k_hw: update PMU to improve ripple issue for AR9485Rajkumar Manoharan
The commit ebefce3d13f8b5a871337ff7c3821ee140c1ea8a failed to set proper PMU value to address ripple issue for AR9485. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k_hw: Fix incorrect Tx control power in AR9003 templateRajkumar Manoharan
CTL power data incorrect in ctlPowerData_2G field of ar9300_eeprom. Setting incorrect CTL power in calibration is causing lower tx power. Tx power was reported as 3dBm while operating in channel 6 HT40+/ in channel 11 HT40- due to CTL powers in the calibration is set to zero. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09b43: read correct register on bcma bus.Hauke Mehrtens
This causes an databus error on a Broadcom SoC using bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09gma500: Fix clashes with DRM updatesAlan Cox
The private object support has migrated from gma500 into the DRM core, remove our now clashing copy. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09dmaengine: PL08x: Fix trivial build errorRussell King
Something changed during the 3.1 merge window in the include files which now causes the pl08x DMA engine driver to fail to build. Fix this by adding the now necessary dma-mapping.h include: drivers/dma/amba-pl08x.c: In function ■pl08x_unmap_buffers■: drivers/dma/amba-pl08x.c:1524: error: implicit declaration of function ■dma_unmap_single■ drivers/dma/amba-pl08x.c:1527: error: implicit declaration of function ■dma_unmap_page■ Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08zcache: Fix build error when sysfs is not definedNitin Gupta
Signed-off-by: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08zcache: Use div_u64 for 64-bit divisionThadeu Lima de Souza Cascardo
xv_get_total_size_bytes returns a u64 value and it's used in a division. This causes build failures in 32-bit architectures, as reported by Randy Dunlap. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08staging:rts_pstor: fix thread synchronization flowwwang
Using different completion variables to synchronize different kernel threads This patch fix a bug that may cause memory leak when driver disconnected. This is not a very urgent bug. Because with the default setting, driver disconnectting routine won't be called except when Linux is shut down. But if the option auto_delink_en is set, a small number of memory would leak out after memory card unplugged. Signed-off-by: wwang <wei_wang@realsil.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-07dp83640: increase receive time stamp buffer sizeRichard Cochran
The dp83640 buffers receive time stamps from special PHY status frames, matching them to received PTP packets in a work queue. Because the timeout for orphaned time stamps is so long and the buffer is so small, the driver can drop time stamps under moderate PTP traffic. This commit fixes the issue by decreasing the timeout to (at least) one timer tick and increasing the buffer size. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-07gianfar: fix fiper alignment after resetting the timeRichard Cochran
After resetting the time, the PPS signals on the FIPER output channels are incorrectly offset from the clock time, as can be readily verified by a looping back the FIPER to the external time stamp input. Despite its name, setting the "Fiper Realignment Disable" bit seems to fix the problem, at least on the P2020. Also, following the example code from the Freescale BSP, it is not really necessary to disable and re-enable the timer in order to reprogram the FIPER. (The documentation is rather unclear on this point. It seems that writing to the alarm register also disables the FIPER.) Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-07rtl8150: rtl8150_disconnect(...) does not need tasklet_disable(...)huajun li
Executing cmd 'rmmod rtl8150' does not return(if your device connects to host), the root cause is tasklet_disable() causes tasklet_kill() block, remove it from rtl8150_disconnect(). Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-07slip: fix NOHZ local_softirq_pending 08 warningMatvejchikov Ilya
When using nanosleep() in an userspace application we get a ratelimit warning: NOHZ: local_softirq_pending 08 According to 481a8199142c050b72bff8a1956a49fd0a75bbe0 the problem is caused by netif_rx() function. This patch replaces netif_rx() with netif_rx_ni() which has to be used from process/softirq context. Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-07sh: Fix boot crash related to SCIRafael J. Wysocki
Commit d006199e72a9 ("serial: sh-sci: Regtype probing doesn't need to be fatal.") made sci_init_single() return when sci_probe_regmap() succeeds, although it should return when sci_probe_regmap() fails. This causes systems using the serial sh-sci driver to crash during boot. Fix the problem by using the right return condition. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Compute protocol sequence numbers and fragment IDs using MD5. crypto: Move md5_transform to lib/md5.c
2011-08-06net: Compute protocol sequence numbers and fragment IDs using MD5.David S. Miller
Computers have become a lot faster since we compromised on the partial MD4 hash which we use currently for performance reasons. MD5 is a much safer choice, and is inline with both RFC1948 and other ISS generators (OpenBSD, Solaris, etc.) Furthermore, only having 24-bits of the sequence number be truly unpredictable is a very serious limitation. So the periodic regeneration and 8-bit counter have been removed. We compute and use a full 32-bit sequence number. For ipv6, DCCP was found to use a 32-bit truncated initial sequence number (it needs 43-bits) and that is fixed here as well. Reported-by: Dan Kaminsky <dan@doxpara.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-06Merge branch 'pm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Runtime: Allow _put_sync() from interrupts-disabled context PM / Domains: Fix pm_genpd_poweron()
2011-08-06Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (38 commits) acer-wmi: support Lenovo ideapad S205 wifi switch acerhdf.c: spaces in aliased changed to * platform-drivers-x86: ideapad-laptop: add missing ideapad_input_exit in ideapad_acpi_add error path x86 driver: fix typo in TDP override enabling Platform: fix samsung-laptop DMI identification for N150/N210/220/N230 dell-wmi: Add keys for Dell XPS L502X platform-drivers-x86: samsung-q10: make dmi_check_callback return 1 Platform: Samsung Q10 backlight driver platform-drivers-x86: intel_scu_ipc: convert to DEFINE_PCI_DEVICE_TABLE platform-drivers-x86: intel_rar_register: convert to DEFINE_PCI_DEVICE_TABLE platform-drivers-x86: intel_menlow: add missing return AE_OK for intel_menlow_register_sensor() platform-drivers-x86: intel_mid_thermal: fix memory leak platform-drivers-x86: msi-wmi: add missing sparse_keymap_free in msi_wmi_init error path Samsung Laptop platform driver: support N510 asus-wmi: add uwb rfkill support asus-wmi: add gps rfkill support asus-wmi: add CWAP support and clarify the meaning of WAPF bits asus-wmi: return proper value in store_cpufv() asus-wmi: check for temp1 presence asus-wmi: add thermal sensor ...
2011-08-06Merge branch 'stable/bug.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set xen: Fix misleading WARN message at xen_release_chunk xen: Fix printk() format in xen/setup.c xen/tracing: it looks like we wanted CONFIG_FTRACE xen/self-balloon: Add dependency on tmem. xen/balloon: Fix compile errors - missing header files. xen/grant: Fix compile warning. xen/pciback: remove duplicated #include
2011-08-06Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: Battery: sysfs_remove_battery(): possible circular locking
2011-08-06savagedb: Fix typo causing regression in savage4 series video chip detectionJohn Stanley
Two additional savage4 variants were added, but the S3_SAVAGE4_SERIES macro was incompletely modified, resulting in a false positive detection of a savage4 card regardless of which savage card is actually present. For non-savage4 series cards, such as a Savage/IX-MV card, this results in garbled video and/or a hard-hang at boot time. Fix this by changing an '||' to an '&&' in the S3_SAVAGE4_SERIES macro. Signed-off-by: John P. Stanley <jpsinthemix@verizon.net> Reviewed-by: Tormod Volden <debian.tormod@gmail.com> [ The macros have incomplete parenthesis too, but whatever .. -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-05Merge branch 'battery' into releaseLen Brown
2011-08-05Battery: sysfs_remove_battery(): possible circular lockingSergey Senozhatsky
Commit 9c921c22a7f33397a6774d7fa076db9b6a0fd669 Author: Lan Tianyu <tianyu.lan@intel.com> ACPI / Battery: Resolve the race condition in the sysfs_remove_battery() fixed BUG https://bugzilla.kernel.org/show_bug.cgi?id=35642 , but as a side effect made lockdep unhappy with sysfs_remove_battery(): [14818.477168] [14818.477170] ======================================================= [14818.477200] [ INFO: possible circular locking dependency detected ] [14818.477221] 3.1.0-dbg-07865-g1280ea8-dirty #668 [14818.477236] ------------------------------------------------------- [14818.477257] s2ram/1599 is trying to acquire lock: [14818.477276] (s_active#8){++++.+}, at: [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a [14818.477323] [14818.477325] but task is already holding lock: [14818.477350] (&battery->lock){+.+.+.}, at: [<ffffffffa0047278>] sysfs_remove_battery+0x10/0x4b [battery] [14818.477395] [14818.477397] which lock already depends on the new lock. [14818.477399] [..] [14818.479121] stack backtrace: [14818.479148] Pid: 1599, comm: s2ram Not tainted 3.1.0-dbg-07865-g1280ea8-dirty #668 [14818.479175] Call Trace: [14818.479198] [<ffffffff814828c3>] print_circular_bug+0x293/0x2a4 [14818.479228] [<ffffffff81070cb5>] __lock_acquire+0xfe4/0x164b [14818.479260] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479288] [<ffffffff810718d2>] lock_acquire+0x138/0x1ac [14818.479316] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479345] [<ffffffff81168a79>] sysfs_deactivate+0x9b/0xec [14818.479373] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479405] [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a [14818.479433] [<ffffffff81167bc5>] sysfs_hash_and_remove+0x54/0x77 [14818.479461] [<ffffffff811681b9>] sysfs_remove_file+0x12/0x14 [14818.479488] [<ffffffff81385bf8>] device_remove_file+0x12/0x14 [14818.479516] [<ffffffff81386504>] device_del+0x119/0x17c [14818.479542] [<ffffffff81386575>] device_unregister+0xe/0x1a [14818.479570] [<ffffffff813c6ef9>] power_supply_unregister+0x23/0x27 [14818.479601] [<ffffffffa004729c>] sysfs_remove_battery+0x34/0x4b [battery] [14818.479632] [<ffffffffa004778f>] battery_notify+0x2c/0x3a [battery] [14818.479662] [<ffffffff8148fe82>] notifier_call_chain+0x74/0xa1 [14818.479692] [<ffffffff810624b4>] __blocking_notifier_call_chain+0x6c/0x89 [14818.479722] [<ffffffff810624e0>] blocking_notifier_call_chain+0xf/0x11 [14818.479751] [<ffffffff8107e40e>] pm_notifier_call_chain+0x15/0x27 [14818.479770] [<ffffffff8107ee1a>] enter_state+0xa7/0xd5 [14818.479782] [<ffffffff8107e341>] state_store+0xaa/0xc0 [14818.479795] [<ffffffff8107e297>] ? pm_async_store+0x45/0x45 [14818.479807] [<ffffffff81248837>] kobj_attr_store+0x17/0x19 [14818.479820] [<ffffffff81167e27>] sysfs_write_file+0x103/0x13f [14818.479834] [<ffffffff81109037>] vfs_write+0xad/0x13d [14818.479847] [<ffffffff811092b2>] sys_write+0x45/0x6c [14818.479860] [<ffffffff81492f92>] system_call_fastpath+0x16/0x1b This patch introduces separate lock to struct acpi_battery to grab in sysfs_remove_battery() instead of battery->lock. So fix by Lan Tianyu is still there, we just grab independent lock. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-05PM / Runtime: Allow _put_sync() from interrupts-disabled contextKevin Hilman
Currently the use of pm_runtime_put_sync() is not safe from interrupts-disabled context because rpm_idle() will release the spinlock and enable interrupts for the idle callbacks. This enables interrupts during a time where interrupts were expected to be disabled, and can have strange side effects on drivers that expected interrupts to be disabled. This is not a bug since the documentation clearly states that only _put_sync_suspend() is safe in IRQ-safe mode. However, pm_runtime_put_sync() could be made safe when in IRQ-safe mode by releasing the spinlock but not re-enabling interrupts, which is what this patch aims to do. Problem was found when using some buggy drivers that set pm_runtime_irq_safe() and used _put_sync() in interrupts-disabled context. Reported-by: Colin Cross <ccross@google.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-10 08:01:46 +0000