summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-23ide: remove ide_setup_dma()Bartlomiej Zolnierkiewicz
Export sff_dma_ops and then remove ide_setup_dma(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: remove ->dma_{status,command} fields from ide_hwif_tBartlomiej Zolnierkiewicz
* Use ->dma_base + offset instead of ->dma_{status,command} and remove no longer needed ->dma_{status,command}. While at it: * Use ATA_DMA_* defines. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: use I/O ops directly in ide-dma.cBartlomiej Zolnierkiewicz
Use I/O ops directly in ide_dma_host_set(), ide_dma_setup(), ide_dma_start() and __ide_dma_end(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->read_sff_dma_status methodBartlomiej Zolnierkiewicz
Add ->read_sff_dma_status method for reading DMA Status register and use it instead of ->INB. While at it: * Use inb() directly in ns87415.c::ns87415_dma_end(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: pass hw_regs_t-s to ide_device_add[_all]() (take 3)Bartlomiej Zolnierkiewicz
* Add 'hw_regs_t **hws' argument to ide_device_add[_all]() and convert host drivers + ide_legacy_init_one() + ide_setup_pci_device[s]() to use it instead of calling ide_init_port_hw() directly. [ However if host has > 1 port we must still set hwif->chipset to hint consecutive ide_find_port() call that the previous slot is occupied. ] * Unexport ide_init_port_hw(). v2: * Use defines instead of hard-coded values in buddha.c, gayle.c and q40ide.c. (Suggested by Geert Uytterhoeven) * Better patch description. v3: * Fix build problem in ide-cs.c. (Noticed by Stephen Rothwell) There should be no functional changes caused by this patch. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: move ide_pci_setup_ports() call out from do_ide_setup_pci_device()Bartlomiej Zolnierkiewicz
* Move ide_pci_setup_ports() call out from do_ide_setup_pci_device() to ide_setup_pci_device[s](). * Drop no longer needed idx argument from do_ide_setup_pci_device(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-pmac: move ide_find_port() call to pmac_ide_setup_device() (take 2)Bartlomiej Zolnierkiewicz
Move ide_find_port() call to pmac_ide_setup_device(). While at it: - fix return value (s/-ENODEV/-ENOENT/) - add DRV_NAME define and use it to set name field of pmac_port_info - use ide_find_port_slot() instead of ide_find_port() - remove superfluous error message (ide_find_port_slot() takes care of it) - drop IDE interface number from driver banner message (but include bus type) v2: * Build fix (thanks to Stephen Rothwell for noticing the issue). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-pmac: add ->init_dev method (take 4)Bartlomiej Zolnierkiewicz
v2/3: * Build fixes from Stephen Rothwell. v4: * Fix ->noprobe setting. (From Benjamin Herrenschmidt) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-pmac: store pmif instead of hwif in ->driver_data (take 2)Bartlomiej Zolnierkiewicz
* Pass pmif instead of hwif to pmac_ide_do_{suspend,resume}(). * Store pmif instead of hwif in ->driver_data. * Use dev_get_drvdata() instead of ->hwif_data to obtain pmif. v2: * Build fixes from Stephen Rothwell. There should be no functional changes caused by this patch. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits) ipw2200: Call netif_*_queue() interfaces properly. netxen: Needs to include linux/vmalloc.h [netdrvr] atl1d: fix !CONFIG_PM build r6040: rework init_one error handling r6040: bump release number to 0.18 r6040: handle RX fifo full and no descriptor interrupts r6040: change the default waiting time r6040: use definitions for magic values in descriptor status r6040: completely rework the RX path r6040: call napi_disable when puting down the interface and set lp->dev accordingly. mv643xx_eth: fix NETPOLL build r6040: rework the RX buffers allocation routine r6040: fix scheduling while atomic in r6040_tx_timeout r6040: fix null pointer access and tx timeouts r6040: prefix all functions with r6040 rndis_host: support WM6 devices as modems at91_ether: use netstats in net_device structure sfc: Create one RX queue and interrupt per CPU package by default sfc: Use a separate workqueue for resets sfc: I2C adapter initialisation fixes ...
2008-07-22Re-delete zombie 'drivers/usb/serial/airprime.c' fileLinus Torvalds
Stephen Rothwell points out that this file got deleted (on purpose) by commit 640c1bce86d1e11ee6a1263fdf6170d3210b1684 ("USB: delete airprime driver"), but then almost immediately incorrectly resurrected by commit 95da310e66ee8090119596c70ca8432e57f9a97f ("usb_serial: API all change"). Delete it again. If it comes back, we'll need to drive a stake through its heart. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22ipw2200: Call netif_*_queue() interfaces properly.David S. Miller
netif_carrier_{on,off}() handles starting and stopping packet flow into the driver. So there is no reason to invoke netif_stop_queue() and netif_wake_queue() in response to link status events. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22netxen: Needs to include linux/vmalloc.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-22[netdrvr] atl1d: fix !CONFIG_PM buildJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-22r6040: rework init_one error handlingFlorian Fainelli
This patch reworks the error handling in r6040_init_one in order not to leak resources and correcly unmap and release PCI regions of the MAC. Also prefix printk's with the driver name for clarity. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: bump release number to 0.18Florian Fainelli
This patch bumps the release of the r6040 driver. There has been quite some versions of it out there, but this one is the one people should report bugs against. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: handle RX fifo full and no descriptor interruptsFlorian Fainelli
This patch allows the MAC to handle the RX FIFO full and no descriptor available interrupts. While we are at it replace the TX interrupt with its corresponding definition. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: change the default waiting timeFlorian Fainelli
This patch changes the default waiting time of a packet, which along with our previous r6040_rx path, was causing huge delays with another host (160 to 230 ms). Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: use definitions for magic values in descriptor statusFlorian Fainelli
Define all the descriptor status the MAC can set. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: completely rework the RX pathFlorian Fainelli
This patch completely reworks the RX path in order to be more accurate about what is going on with the MAC. We no longer read the error from the MLSR register instead read the descriptor status register which reflects, the error per descriptor. We now allocate skbs on the fly in r6040_rx, and we handle allocation failure instead of simply dropping the packet. Remove the rx_free_desc counter of r6040_private structure since we allocate skbs in the RX path. r6040_rx_buf_alloc is now removed and becomes unuseless. Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: call napi_disable when puting down the interface and set lp->dev ↵Florian Fainelli
accordingly. We did not call napi_disabled when putting down the interface which should be done. Finally initialize lp->dev when everything is set. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22mv643xx_eth: fix NETPOLL buildLennert Buytenhek
Joseph Fannin <jfannin@gmail.com> and Takashi Iwai <tiwai@suse.de> noticed that commit 073a345c04b01da0cc5b79ac7be0c7c8b1691ef5 ("mv643xx_eth: clarify irq masking and unmasking") broke the mv643xx_eth build when NETPOLL is enabled, due to it not renaming one instance of INT_CAUSE_EXT in mv643xx_eth_netpoll(). This patch takes care of that instance as well. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Joseph Fannin <jfannin@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: rework the RX buffers allocation routineFlorian Fainelli
Rework the RX buffers allocation function so that we do not leak memory in the case we could not allocate skbs for the RX path. Propagate the errors to the r6040_up function where we call the RX buffers allocation function. Also rename the r6040_alloc_txbufs function to r6040_init_txbufs, to reflect what it really does. Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: fix scheduling while atomic in r6040_tx_timeoutFlorian Fainelli
Add a helper function which only modifies R6040 MAC registers use it when we timeout, and on adapter initialization. Fix the scheduling while atomic but in the timeout routine due to the reallocation of rx/tx buffers. Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: fix null pointer access and tx timeoutsFlorian Fainelli
This patch fixes a null pointer access in r6040_rx due to lp->dev not being initialized. Fix the TX timeouts, TX irq was not re-enabled on RX irq Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: prefix all functions with r6040Florian Fainelli
Prefix all functions inside the r6040 driver with r6040 to avoid namespace clashing. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22rndis_host: support WM6 devices as modemsThomas Backlund
This patch allows Windows Mobile 6 devices to be used for tethering -- that is, used as modems. It was requested by AdamW in kernel bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=11119 and Mandriva kernel-discuss list. It is tested and confirmed to work by Peterl: http://forum.eeeuser.com/viewtopic.php?pid=323543#p323543 This patch is based on the patch in the above kernel bugzilla, which is from the usb-rndis-lite tree. [ dbrownell@users.sourceforge.net: misc fixes ] Signed-off-by: Thomas Backlund <tmb@mandriva.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22at91_ether: use netstats in net_device structurePaulius Zaleckas
Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22sfc: Create one RX queue and interrupt per CPU package by defaultBen Hutchings
Using multiple cores in the same package to handle received traffic does not appear to provide a performance benefit. Therefore use CPU topology information to count CPU packages and use that as the default number of RX queues and interrupts. We rely on interrupt balancing to spread the interrupts across packages. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22sfc: Use a separate workqueue for resetsBen Hutchings
This avoids deadlock in case a reset is triggered during self-test. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22sfc: I2C adapter initialisation fixesBen Hutchings
As recommended by Jean Delvare: - Increase timeout to 50 ms - Leave adapter class clear so that unwanted drivers do not probe our bus - Use strlcpy() for name initialisation Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: make ioport freeTaku Izumi
This patch makes e1000 driver ioport-free. This corrects behavior in probe function so as not to request ioport resources as long as they are not really needed. This is based on the ioport-free patch of e1000 driver from Auke Kok and Tomohiro Kusumi. Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jeff Kirsher<jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: delete non NAPI code from the driverFrancois Romieu
Compile-tested only. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: remove email referenceJeff Kirsher
The email linux-nics@intel.com is no longer available, remove all references. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Move assignments in tests before testJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: checkpatch cleanJoe Perches
Redefine DPRINTK macro using do while(0) __FUNCTION__ to __func__ structs {} on separate lines Surround negative constants with () Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Remove spaces after casts and function namesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Move extern function definitions to e1000.hJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Use hw, er32, and ew32Joe Perches
Use struct e1000_hw *hw = adapter->hw; where necessary Change macros E1000_READ_REG and E1000_WRITE_REG to er32 and ew32 Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: neaten function declarationsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22Fix typo in meth driverChristoph Lameter
An | in an if statement to check a bit? I think this needs to be a &. As a result of this typo meth will always operate in promiscuous mode. Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22atl1e: Atheros L1E Gigabit Ethernet driverJie Yang
Full patch for the Atheros L1E Gigabit Ethernet driver. Supportring AR8121, AR8113 and AR8114 Signed-off-by: Jie Yang <jie.yang @atheros.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22ixgbe: remove device ID for unsupported deviceJesse Brandeburg
The ixgbe driver was untested with device ID 8086:10c8 but still advertises support. Currently if this device is present in the system when the driver is loaded, the system will panic. Remove this device ID until full support can be tested with available hardware. This patch is necessary for 2.6.24, 2.6.25 and 2.6.26 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netdev: bunch of drivers: avoid WARN at net/core/dev.c:1328Anton Vorontsov
The drivers were touching net queue before it has been started, so without this patch, the drivers will potentially WARN at net/core/dev.c:1328. I don't have the hardware for the drivers below, so this patch is untested, and thus should be carefully peer reviewed. tc35815.c au1000_eth.c bfin_mac.c macb.c ^ The four drivers are using phylib, they're calling netif_start_queue() in open() callback. So trivially remove netif_tx_schedule_all(). Phylib will handle netif_carrier_*(). cpmac.c fec_mpc52xx.c fs_enet/fs_enet-main.c sh_eth.c ^ The same as above, but these were also needlessly calling netif_carrier_*() functions. So removed queue calls and also remove carrier calls, since phylib will handle it. fs_enet-main.c also didn't call netif_start_queue() at open(), this is fixed now. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-228139too: Fall back to PIO when MMIO fails.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-228139too: Force usage of PIO on OQO2Dave Jones
The OQO model 2 has an RTL8139 from Atheros that doesn't like MMIO. It fails on modprobe, with a 'PCI Bus error' message. Force it to always use polled IO. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-228139too: Make PIO/MMIO a runtime decision through a module parameter.Dave Jones
This is needed to support devices that only work with PIO without penalising devices that work fine with MMIO in distro kernels. It also allows us to eventually use PIO as a fallback when setting up MMIO fails. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22net/phy: Fix 88e1111 copper/fiber selection in RGMII modeWang Jian
MII_M1111_HWCFG_FIBER_COPPER_RES is a bit of MII_M1111_PHY_EXT_SR, not MII_M1111_PHY_EXT_CR. Signed-off-by: Wang Jian <lark@linux.net.cn> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-15 09:44:46 +0000