summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2009-02-02qlge: bugfix: Fix endian issue when reading flash.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-31igb: fix link reporting when using sgmiiAlexander Duyck
When using sgmii the link was not being properly passed up to the driver from the underlying link management functions. This change corrects it so that get_link_status is cleared when a link has been found. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-31igb: prevent skb_over panic w/ mtu smaller than 1KAlexander Duyck
A panic has been observed with frame sizes smaller than 1K. This has been root caused to the hardware spanning larger frames across multiple buffers and then reporting the original frame size in the first descriptor. To prevent this we can enable set the LPE bit which in turn will restrict packet sizes to those set in the RLPML register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-31igb: Fix DCA errors and do not use context index for 82576Alexander Duyck
82576 was being incorrectly flagged as needing a context index. It does not as each ring has it's own table of 2 contexts. Driver was registering after registering the driver instead of the other way around. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Replace stats_enabled flag with a disable countBen Hutchings
Currently we use a spin-lock to serialise statistics fetches and also to inhibit them for short periods of time, plus a flag to enable/disable statistics fetches for longer periods of time, during online reset. This was apparently insufficient to deal with the several reasons for stats being disabled. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFX7101/SFT9001: Fix AN advertisementsBen Hutchings
All 10Xpress PHYs require autonegotiation all the time; enforce this in the set_settings() method and do not treat it as a workaround. Remove claimed support for 100M HD mode since it is not supported by current firmware. Do not set speed override bits when AN is enabled, and do not use register 1.49192 for AN configuration as it can override what we set elsewhere. Always set the AN selector bits to 1 (802.3). Fix confusion between Next Page and Extended Next Page. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFT9001: Always enable XNP exchange on SFT9001 rev BBen Hutchings
This workaround is not specific to rev A. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Update board info for hardware monitor on SFN4111T-R5 and laterBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Test for PHYXS faults whenever we cannot test link state bitsSteve Hodgson
Depending on the loopback mode, there may be no pertinent link state bits. In this case we test the PHYXS RX fault bit instead. Make sure to do this in all cases where there are no link state bits. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Reinitialise the PHY completely in case of a PHY or NIC resetSteve Hodgson
In particular, set pause advertising bits properly. A PHY reset is not necessary to recover from the register self-test, so use a "invisible" reset there instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Fix post-reset MAC selectionSteve Hodgson
Modify falcon_switch_mac() to always set NIC_STAT_REG, even if the the MAC is the same as it was before. This ensures that the value is correct after an online reset. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1Ben Hutchings
Change sfn4111t_reset() to change only GPIO output enables so that it doesn't break subsequent I2C operations. Update comments to explain exactly what we're doing. Add a short sleep to make sure the FLASH_CFG_1 value is latched before any subsequent I2C operations. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFT9001: Fix speed reporting in 1G PHY loopbackSteve Hodgson
Instead of disabling AN in loopback, just prevent restarting AN and override the speed in sft9001_get_settings(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFX7101: Remove workaround for bad link trainingSteve Hodgson
Early versions of the SFX7101 firmware could complete link training in a state where it would not adequately cancel noise (Solarflare bug 10750). We previously worked around this by resetting the PHY after seeing many Ethernet CRC errors. This workaround is unsafe since it takes no account of the interval between errors; it also appears to be unnecessary with production firmware. Therefore remove it. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFT9001: Enable robust link trainingSteve Hodgson
Enable a firmware option that appears to be necessary for reliable operation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sky2: fix hard hang with netconsoling and iface going upAlexey Dobriyan
Printing anything over netconsole before hw is up and running is, of course, not going to work. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29tulip: fix 21142 with 10Mbps without negotiationPhilippe De Muyter
with current kernels, tulip 21142 ethernet controllers fail to connect to a 10Mbps only (i.e. without negotiation-partner) network. It used to work in 2.4 kernels. Fix that. Tested on a 21142 Rev 0x11. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29drivers/net/skfp: if !capable(CAP_NET_ADMIN): inverted logicRoel Kluin
Fix inverted logic Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29gianfar: Fix Wake-on-LAN supportAnton Vorontsov
commit 0f0ca340e57bd7446855fefd07a64249acf81223 ("phy: power management support") caused a regression in the gianfar driver. Now phylib turns off PHY power during suspend, and thus WOL doesn't work anymore. This patch workarounds the issue by enabling wakeup in the MDIO device, i.e. just restores the old behaviour for the gianfar driver. Note that this way all PHYs on a given MDIO bus won't be turned off during suspend, which isn't good from the power saving point of view. A proper, per netdevice wakeup management support will need a bit reworked phylib suspend/resume logic. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29smsc911x: timeout reaches -1Roel Kluin
With a postfix decrement the timeout will reach -1 rather than 0, so the warning will not be issued. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29smsc9420: fix interrupt signalling test failuresSteve Glendinning
smsc9420 performs an interrupt signalling test when the interface is brought up. The current code mistakenly sets its test flag to false AFTER enabling the software interrupt source, making failure quite likely. This patch changes the code to set the test flag BEFORE enabling interrupts. I've also removed an smp_wmb because the following spinlock provides an implicit memory barrier. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29ucc_geth: Change uec phy id to the same format as gianfar'sHaiying Wang
The commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver") changes the gianfar's phy id to the format like "mdio@xxxx:xx", but uec still uses the old format like "xxxxxxxx:xx". For the board whose UEC uses gianfar-mdio like MPC8568MDS, the phy can not be attached because of the incompatible phy id format. This patch changes uec's phy id to the same format as gianfar's. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29wimax: fix build issue when debugfs is disabledInaky Perez-Gonzalez
As reported by Toralf Förster and Randy Dunlap. - http://linuxwimax.org/pipermail/wimax/2009-January/000460.html - http://lkml.org/lkml/2009/1/29/279 The definitions needed for the wimax stack and i2400m driver debug infrastructure was, by mistake, compiled depending on CONFIG_DEBUG_FS (by them being placed in the debugfs.c files); thus the build broke in 2.6.29-rc3 when debugging was enabled (CONFIG_WIMAX_DEBUG) and DEBUG_FS was disabled. These definitions are always needed if debug is enabled at compile time (independently of DEBUG_FS being or not enabled), so moving them to a file that is always compiled fixes the issue. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29netxen: fix memory leak in drivers/net/netxen_nic_init.cDaniel Marjamäki
For kernel bugzilla #12537: http://bugzilla.kernel.org/show_bug.cgi?id=12537 Free memory. Signed-off-by: Daniel Marjamäki <danielm77@spray.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29netxen: revert jumbo ringsizeDhananjay Phadke
Reducing jumbo ring size below 1024 reduces throughput for old firmwares (3.4.216 and older) running on older (NX2031) chip, so restore it back to 1024. This was reduced in commit 32ec803348b4d5f1353e1d7feae30880b8b3e342 ("netxen: reduce memory footprint"). Raising jumbo ring size from 512 to 1024, adds ~4MB per port, but there's still big saving because of original patch (~20MB per port). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-01-29ath5k: fix locking in ath5k_configBob Copeland
ath5k_config updates the software context without taking sc->lock. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: fix kernel oops when ucode DMA memory allocation failureZhu, Yi
The patch fixes memcpy to NULL address when the ucode DMA allocation failure. This is a fix to bug http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1861 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rtl8187: Fix error in setting OFDM power settings for RTL8187LLarry Finger
After reports of poor performance, a review of the latest vendor driver (rtl8187_linux_26.1025.0328.2007) for RTL8187L devices was undertaken. A difference was found in the code used to index the OFDM power tables. When the Linux driver was changed, my unit works at a much greater range than before. I think this fixes Bugzilla #12380 and has been tested by at least two other users. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Martín Ernesto Barreyro <barreyromartin@gmail.com> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-27e1000: fix bug with shared interrupt during resetJesse Brandeburg
A nasty bug was found where an MTU change (or anything else that caused a reset) could race with the interrupt code. The interrupt code was entered by a shared interrupt during the MTU change. This change prevents the interrupt code from running while the driver is in the middle of its reset path. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26r6040: Remove unused variable pdev from drivers/net/r6040.cManish Katiyar
drivers/net/r6040.c:441: warning: unused variable 'pdev' Signed-off-by: Manish Katiyar <mkatiyar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26virtio_net: use correct accessors for scatterlistsIra W. Snyder
Without this fix, virtio_net makes incorrect usage of scatterlists. It sets the end of the scatterlist chain after the first element, despite the fact that more entries come after it. If you try to run dma_map_sg() on one of the scatterlists given to you by add_buf(), you will get a null pointer oops. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] fix section-based ioremap [NET] am79c961a: fix spin_lock usage [ARM] omap: usb: thou shalt not provide empty release functions [ARM] omap: watchdog: allow OMAP watchdog driver on OMAP34xx platforms [ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3 [ARM] clkdev: fix clock matching [ARM] 5370/1: at91: fix rm9200 watchdog [ARM] 5368/1: arch/arm/mach-davinci/usb.c buildfix [ARM] 5365/1: s3cmci: Use new include path of dma.h [ARM] fix StrongARM-11x0 page copy implementation [ARM] omap: ensure OMAP drivers pass a struct device to clk_get() ARM: OMAP: Fix compile for h3 MMC ARM: OMAP: Remove unused platform devices, v3 ARM: OMAP: Fix ASoC by enabling writes to XCCR and RCCR McBSP registers, v3 ARM: OMAP: Fix OSK ASoC by registering I2C board info for tlvaic23 ARM: OMAP: remove duplicated #include's ARM: OMAP: Fix DMA CCR programming for request line > 63, v3 ARM: OMAP: Fix gpio.c compile on 15xx with CONFIG_DEBUGFS ARM: OMAP: Fix compile for beagle ARM: OMAP: Fix gpio by switching to generic gpio calls, v2 ...
2009-01-26Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Warn on deprecated binding model use eeprom: More consistent symbol names eeprom: Move 93cx6 eeprom driver to /drivers/misc/eeprom spi: Move at25 (for SPI eeproms) to /drivers/misc/eeprom i2c: Move old eeprom driver to /drivers/misc/eeprom i2c: Move at24 to drivers/misc/eeprom i2c: Quilt tree has moved i2c: Delete many unused adapter IDs i2c: Delete 10 unused driver IDs
2009-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (92 commits) gianfar: Revive VLAN support vlan: Export symbols as non GPL symbols. bnx2x: tx_has_work should not wait for FW netxen: reduce memory footprint netxen: fix vlan tso/checksum offload net: Fix linux/if_frad.h's suitability for userspace. net: Move config NET_NS to from net/Kconfig to init/Kconfig isdn: Fix missing ifdef in isdn_ppp networking: document "nc" in addition to "netcat" in netconsole.txt e1000e: workaround hw errata af_key: initialize xfrm encap_oa virtio_net: Fix MAX_PACKET_LEN to support 802.1Q VLANs lcs: fix compilation for !CONFIG_IP_MULTICAST rtl8187: Add termination packet to prevent stall iwlwifi: fix rs_get_rate WARN_ON() p54usb: fix packet loss with first generation devices sctp: Fix another socket race during accept/peeloff sctp: Properly timestamp outgoing data chunks for rtx purposes sctp: Correctly start rtx timer on new packet transmissions. sctp: Fix crc32c calculations on big-endian arhes. ...
2009-01-26gianfar: Revive VLAN supportAnton Vorontsov
commit 77ecaf2d5a8bfd548eed3f05c1c2e6573d5de4ba ("gianfar: Fix VLAN HW feature related frame/buffer size calculation") wrongly removed priv->vlgrp assignment, and now priv->vlgrp is always NULL. This patch fixes the issue, plus fixes following sparse warning introduced by the same commit: gianfar.c:1406:13: warning: context imbalance in 'gfar_vlan_rx_register' - wrong count at exit gfar_vlan_rx_register() checks for "if (old_grp == grp)" and tries to return w/o dropping the lock. According to net/8021q/vlan.c VLAN core issues rx_register() callback: 1. In register_vlan_dev() only on a newly created group; 2. In unregister_vlan_dev() only if the group becomes empty. Thus the check in the gianfar driver isn't needed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26bnx2x: tx_has_work should not wait for FWVladislav Zolotarov
The current tx_has_work waited until all packets sent by the driver are marked as completed by the FW. This is too greedy and it causes the bnx2x_poll to spin in vain. The driver should only check that all packets FW already completed are freed - only in unload flow the driver should make sure that transmit queue is empty Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26netxen: reduce memory footprintDhananjay Phadke
o reduce rx ring size from 8192 to 4096. o cut down old huge lro buffers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26netxen: fix vlan tso/checksum offloadDhananjay Phadke
o set netdev->vlan_features appropriately. o fix tso descriptor initialization for vlan case. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26isdn: Fix missing ifdef in isdn_pppDaniele Venzano
The following patch fixes a warning caused by a missing ifdef in isdn_ppp.c. A function was defined, but never used if CONFIG_IPPP_FILTER was not defined. The warning was: 'get_filter' defined but not used Patch is against 2.6.28.1 Signed-off-by: Daniele Venzano <venza@brownhat.org> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26eeprom: More consistent symbol namesJean Delvare
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26eeprom: Move 93cx6 eeprom driver to /drivers/misc/eepromWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26spi: Move at25 (for SPI eeproms) to /drivers/misc/eepromWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26i2c: Move old eeprom driver to /drivers/misc/eepromWolfram Sang
Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26i2c: Move at24 to drivers/misc/eepromWolfram Sang
As drivers/i2c/chips is going to go away, move the driver to drivers/misc/eeprom. Other eeprom drivers may be moved here later, too. Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26i2c: Delete many unused adapter IDsJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26e1000e: workaround hw errataJesse Brandeburg
There is a hardware errata in some revisions of the 82574 that needs to be worked around in the driver by setting a register bit at init. If this bit is not set A0 versions of the 82574 can generate tx hangs. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: power_supply: pda_power: Don't request shared IRQs w/ IRQF_DISABLED
2009-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: klist.c: bit 0 in pointer can't be used as flag debugfs: introduce stub for debugfs_create_size_t() when DEBUG_FS=n sysfs: fix problems with binary files PNP: fix broken pnp lowercasing for acpi module aliases driver core: Convert '/' to '!' in dev_set_name()
2009-01-26Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: Fix cursor physical address choice to match the 2D driver. drm: stash AGP include under the do-we-have-AGP ifdef drm: don't whine about not reading EDID data drm/i915: hook up LVDS DPMS property drm/i915: remove unnecessary debug output in KMS init i915: fix freeing path for gem phys objects. drm: create mode_config idr lock drm: fix leak of device mappings since multi-master changes.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 11:21:49 +0000