summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2010-03-19ixgbevf: Fix VF Stats accounting after resetGreg Rose
The counters in the 82599 Virtual Function are not clear on read. They accumulate to the maximum value and then roll over. They are also not cleared when the VF executes a soft reset, so it is possible they are non-zero when the driver loads and starts. This has all been accounted for in the code that keeps the stats up to date but there is one case that is not. When the PF driver is reset the counters in the VF are all reset to zero. This adds an additional accounting overhead into the VF driver when the PF is reset under its feet. This patch adds additional counters that are used by the VF driver to accumulate and save stats after a PF reset has been detected. Prior to this patch displaying the stats in the VF after the PF has reset would show bogus data. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbe: Set IXGBE_RSC_CB(skb)->DMA field to zero after unmapping the addressMallikarjuna R Chilakala
As per Simon Horman's feedback set IXGBE_RSC_CB(skb)->dma to zero after unmapping HWRSC DMA address to avoid double freeing. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbe: fix for real_num_tx_queues update issueVasu Dev
Currently netdev_features_change is called before fcoe tx queues setup is done, so this patch moves calling of netdev_features_change after tx queues setup is done in ixgbe_init_interrupt_scheme, so that real_num_tx_queues is updated correctly on each fcoe enable or disable. This allows additional fcoe queues updated correctly in vlan driver for their correct queue selection. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18smsc95xx: Fix tx checksum offload for small packetsSteve Glendinning
TX checksum offload does not work properly when transmitting UDP packets with 0, 1 or 2 bytes of data. This patch works around the problem by calculating checksums for these packets in the driver. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18ixgbe: Fix 82599 KX4 Wake on LAN issue after an improper system shutdownMallikarjuna R Chilakala
Advanced Power Management is disabled for 82599 KX4 connections by clearing GRC.APME bit, causing it to not wake the system from an improper system shutdown. By default GRC.APME is enabled and software is not supposed to clear these settings during adapter probe. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18ixgbe: Fix 82599 multispeed fiber link issues due to Tx laser flappingMallikarjuna R Chilakala
Fix 82599 link issues during driver load and unload test using multi-speed 10G & 1G fiber modules. When connected back to back sometime 82599 multispeed fiber modules would link at 1G speed instead of 10G highest speed, due to a race condition in autotry process involving Tx laser flapping. Move autotry autoneg-37 tx laser flapping process from multispeed module init setup to driver unload. This will alert the link partner to restart its autotry process when it tries to establish the link with the link partner Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-03-18jme: Advance driver version numberGuo-Fu Tseng
Advance driver version number after some bug fix. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18jme: Protect vlgrp structure by pause RX actions.Guo-Fu Tseng
Temporary stop the RX IRQ, and disable (sync) tasklet or napi. And restore it after finished the vlgrp pointer assignment. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18jme: Fix VLAN memory leakGuo-Fu Tseng
Fix memory leak while receiving 8021q tagged packet which is not registered by user. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18KS8851: Avoid NULL pointer in set rx modeAbraham Arce
Kernel NULL pointer dereference when setting mode for IFF_MULTICAST. Tested on SDP OMAP4430 board. ks8851 spi1.0: message enable is 0 ks8851 spi1.0: revision 0, MAC f2:f4:2f:56:37:de, IRQ 194 Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.34-rc1-01039-g38d7ed1-dirty #3) PC is at ks8851_set_rx_mode+0x88/0x124 LR is at bitrev32+0x24/0x2c <snip> Backtrace: [<c01bfbd8>] ? (ks8851_set_rx_mode+0x0/0x124) [<c01d4164>] (__dev_set_rx_mode+0x0/0x90) [<c01dc460>] (dev_mc_add+0x0/0x78) [<c021f0bc>] (igmp_group_added+0x0/0x64) [<c021f174>] (ip_mc_inc_group+0x0/0x150) [<c021f3b8>] (ip_mc_up+0x0/0x64) [<c0219eb0>] (inetdev_event+0x0/0x3d4) [<c0066818>] (notifier_call_chain+0x0/0x78) [<c00668b8>] (__raw_notifier_call_chain+0x0/0x24) [<c00668dc>] (raw_notifier_call_chain+0x0/0x28) [<c01d7484>] (call_netdevice_notifiers+0x0/0x24) [<c01d7780>] (__dev_notify_flags+0x0/0x68) [<c01d77e8>] (dev_change_flags+0x0/0x4c) [<c001f0bc>] (ip_auto_config+0x0/0xf1c) [<c0028490>] (do_one_initcall+0x0/0x1bc) [<c00084dc>] (kernel_init+0x0/0x234) Code: e15130bc e1833012 e14130bc e5943000 (e5934000) ---[ end trace ed0fb00a94142792 ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17gigaset: fix build failureTilman Schmidt
Update the dummy LL interface to the LL interface change introduced by commit daab433c03c15fd642c71c94eb51bdd3f32602c8. This fixes the build failure occurring after that commit when enabling ISDN_DRV_GIGASET but neither ISDN_I4L nor ISDN_CAPI. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16l2tp: Fix UDP socket reference count bugs in the pppol2tp driverJames Chapman
This patch fixes UDP socket refcnt bugs in the pppol2tp driver. A bug can cause a kernel stack trace when a tunnel socket is closed. A way to reproduce the issue is to prepare the UDP socket for L2TP (by opening a tunnel pppol2tp socket) and then close it before any L2TP sessions are added to it. The sequence is Create UDP socket Create tunnel pppol2tp socket to prepare UDP socket for L2TP pppol2tp_connect: session_id=0, peer_session_id=0 L2TP SCCRP control frame received (tunnel_id==0) pppol2tp_recv_core: sock_hold() pppol2tp_recv_core: sock_put L2TP ZLB control frame received (tunnel_id=nnn) pppol2tp_recv_core: sock_hold() pppol2tp_recv_core: sock_put Close tunnel management socket pppol2tp_release: session_id=0, peer_session_id=0 Close UDP socket udp_lib_close: BUG The addition of sock_hold() in pppol2tp_connect() solves the problem. For data frames, two sock_put() calls were added to plug a refcnt leak per received data frame. The ref that is grabbed at the top of pppol2tp_recv_core() must always be released, but this wasn't done for accepted data frames or data frames discarded because of bad UDP checksums. This leak meant that any UDP socket that had passed L2TP data traffic (i.e. L2TP data frames, not just L2TP control frames) using pppol2tp would not be released by the kernel. WARNING: at include/net/sock.h:435 udp_lib_unhash+0x117/0x120() Pid: 1086, comm: openl2tpd Not tainted 2.6.33-rc1 #8 Call Trace: [<c119e9b7>] ? udp_lib_unhash+0x117/0x120 [<c101b871>] ? warn_slowpath_common+0x71/0xd0 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120 [<c101b8e3>] ? warn_slowpath_null+0x13/0x20 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120 [<c11598a7>] ? sk_common_release+0x17/0x90 [<c11a5e33>] ? inet_release+0x33/0x60 [<c11577b0>] ? sock_release+0x10/0x60 [<c115780f>] ? sock_close+0xf/0x30 [<c106e542>] ? __fput+0x52/0x150 [<c106b68e>] ? filp_close+0x3e/0x70 [<c101d2e2>] ? put_files_struct+0x62/0xb0 [<c101eaf7>] ? do_exit+0x5e7/0x650 [<c1081623>] ? mntput_no_expire+0x13/0x70 [<c106b68e>] ? filp_close+0x3e/0x70 [<c101eb8a>] ? do_group_exit+0x2a/0x70 [<c101ebe1>] ? sys_exit_group+0x11/0x20 [<c10029b0>] ? sysenter_do_call+0x12/0x26 Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16smsc95xx: wait for PHY to complete reset during initSteve Glendinning
This patch ensures the PHY correctly completes its reset before setting register values. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16l2tp: Fix oops in pppol2tp_xmitJames Chapman
When transmitting L2TP frames, we derive the outgoing interface's UDP checksum hardware assist capabilities from the tunnel dst dev. This can sometimes be NULL, especially when routing protocols are used and routing changes occur. This patch just checks for NULL dst or dev pointers when checking for netdev hardware assist features. BUG: unable to handle kernel NULL pointer dereference at 0000000c IP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp] *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/class/net/lo/operstate Modules linked in: pppol2tp pppox ppp_generic slhc ipv6 dummy loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_pcm snd_timer snd soundcore snd_page_alloc evdev psmouse serio_raw processor button i2c_piix4 i2c_core ati_agp agpgart pcspkr ext3 jbd mbcache sd_mod ide_pci_generic atiixp ide_core ahci ata_generic floppy ehci_hcd ohci_hcd libata e1000e scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Not tainted (2.6.32.8 #1) EIP: 0060:[<f89d074c>] EFLAGS: 00010297 CPU: 3 EIP is at pppol2tp_xmit+0x341/0x4da [pppol2tp] EAX: 00000000 EBX: f64d1680 ECX: 000005b9 EDX: 00000000 ESI: f6b91850 EDI: f64d16ac EBP: f6a0c4c0 ESP: f70a9cac DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f70a8000 task=f70a31c0 task.ti=f70a8000) Stack: 000005a9 000005b9 f734c400 f66652c0 f7352e00 f67dc800 00000000 f6b91800 <0> 000005a3 f70ef6c4 f67dcda9 000005a3 f89b192e 00000246 000005a3 f64d1680 <0> f63633e0 f6363320 f64d1680 f65a7320 f65a7364 f65856c0 f64d1680 f679f02f Call Trace: [<f89b192e>] ? ppp_push+0x459/0x50e [ppp_generic] [<f89b217f>] ? ppp_xmit_process+0x3b6/0x430 [ppp_generic] [<f89b2306>] ? ppp_start_xmit+0x10d/0x120 [ppp_generic] [<c11c15cb>] ? dev_hard_start_xmit+0x21f/0x2b2 [<c11d0947>] ? sch_direct_xmit+0x48/0x10e [<c11c19a0>] ? dev_queue_xmit+0x263/0x3a6 [<c11e2a9f>] ? ip_finish_output+0x1f7/0x221 [<c11df682>] ? ip_forward_finish+0x2e/0x30 [<c11de645>] ? ip_rcv_finish+0x295/0x2a9 [<c11c0b19>] ? netif_receive_skb+0x3e9/0x404 [<f814b791>] ? e1000_clean_rx_irq+0x253/0x2fc [e1000e] [<f814cb7a>] ? e1000_clean+0x63/0x1fc [e1000e] [<c1047eff>] ? sched_clock_local+0x15/0x11b [<c11c1095>] ? net_rx_action+0x96/0x195 [<c1035750>] ? __do_softirq+0xaa/0x151 [<c1035828>] ? do_softirq+0x31/0x3c [<c10358fe>] ? irq_exit+0x26/0x58 [<c1004b21>] ? do_IRQ+0x78/0x89 [<c1003729>] ? common_interrupt+0x29/0x30 [<c101ac28>] ? native_safe_halt+0x2/0x3 [<c1008c54>] ? default_idle+0x55/0x75 [<c1009045>] ? c1e_idle+0xd2/0xd5 [<c100233c>] ? cpu_idle+0x46/0x62 Code: 8d 45 08 f0 ff 45 08 89 6b 08 c7 43 68 7e fb 9c f8 8a 45 24 83 e0 0c 3c 04 75 09 80 63 64 f3 e9 b4 00 00 00 8b 43 18 8b 4c 24 04 <8b> 40 0c 8d 79 11 f6 40 44 0e 8a 43 64 75 51 6a 00 8b 4c 24 08 EIP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp] SS:ESP 0068:f70a9cac CR2: 000000000000000c Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driverSteve Glendinning
This patch adds a driver for SMSC's LAN7500 family of USB 2.0 to gigabit ethernet adapters. It's loosely based on the smsc95xx driver but the device registers for LAN7500 are completely different. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16ne: Do not use slashes in irq name stringAtsushi Nemoto
This patch fixes following warning introduced by commit 12bac0d9f4dbf3445a0319beee848d15fa32775e ("proc: warn on non-existing proc entries"): WARNING: at /work/mips-linux/make/linux/fs/proc/generic.c:316 __xlate_proc_name+0xe0/0xe8() name 'RBHMA4X00/RTL8019' Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16NET: ksz884x, fix lock imbalanceJiri Slaby
Stanse found that one error path (when alloc_skb fails) in netdev_tx omits to unlock hw_priv->hwlock. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tristram Ha <Tristram.Ha@micrel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16gigaset: correct range checking off by one errorTilman Schmidt
Correct a potential array overrun due to an off by one error in the range check on the CAPI CONNECT_REQ CIPValue parameter. Found and reported by Dan Carpenter using smatch. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16iwlwifi: Silence tfds_in_queue messageAdel Gadllah
Commit a239a8b47cc0e5e6d7416a89f340beac06d5edaa introduced a noisy message, that fills up the log very fast. The error seems not to be fatal (the connection is stable and performance is ok), so make it IWL_DEBUG_TX rather than IWL_ERR. Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Cc: stable@kernel.org Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-16ath9k: fix BUG_ON triggered by PAE framesFelix Fietkau
When I initially stumbled upon sequence number problems with PAE frames in ath9k, I submitted a patch to remove all special cases for PAE frames and let them go through the normal transmit path. Out of concern about crypto incompatibility issues, this change was merged instead: commit 6c8afef551fef87a3bf24f8a74c69a7f2f72fc82 Author: Sujith <Sujith.Manoharan@atheros.com> Date: Tue Feb 9 10:07:00 2010 +0530 ath9k: Fix sequence numbers for PAE frames After a lot of testing, I'm able to reliably trigger a driver crash on rekeying with current versions with this change in place. It seems that the driver does not support sending out regular MPDUs with the same TID while an A-MPDU session is active. This leads to duplicate entries in the TID Tx buffer, which hits the following BUG_ON in ath_tx_addto_baw(): index = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno); cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1); BUG_ON(tid->tx_buf[cindex] != NULL); I believe until we actually have a reproducible case of an incompatibility with another AP using no PAE special cases, we should simply get rid of this mess. This patch completely fixes my crash issues in STA mode and makes it stay connected without throughput drops or connectivity issues even when the AP is configured to a very short group rekey interval. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-16wl1251: fix potential crashGrazvydas Ignotas
In case debugfs does not init for some reason (or is disabled on older kernels) driver does not allocate stats.fw_stats structure, but tries to clear it later and trips on a NULL pointer: Unable to handle kernel NULL pointer dereference at virtual address 00000000 PC is at __memzero+0x24/0x80 Backtrace: [<bf0ddb88>] (wl1251_debugfs_reset+0x0/0x30 [wl1251]) [<bf0d6a2c>] (wl1251_op_stop+0x0/0x12c [wl1251]) [<bf0bc228>] (ieee80211_stop_device+0x0/0x74 [mac80211]) [<bf0b0d10>] (ieee80211_stop+0x0/0x4ac [mac80211]) [<c02deeac>] (dev_close+0x0/0xb4) [<c02deac0>] (dev_change_flags+0x0/0x184) [<c031f478>] (devinet_ioctl+0x0/0x704) [<c0320720>] (inet_ioctl+0x0/0x100) Add a NULL pointer check to fix this. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15ISDN: Add PCI ID for HFC-2S/4S Beronet Card PCIeLars Ellenberg
A few subdevice IDs seem to have been dropped when hfc_multi was included upstream, just compare the list at http://www.openvox.cn/viewvc/misdn/trunk/hfc_multi.c?revision=75&view=annotate#l175 with the IDs in drivers/isdn/hardware/mISDN/hfcmulti.c Added PCIe 2 Port card and LED settings (same as PCI) Do not use <linux/pci_ids.h> /KKe Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2010-03-15myri: remove dead codeDan Carpenter
We can never reach the return statement. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15gigaset: prune use of tty_buffer_request_roomTilman Schmidt
Calling tty_buffer_request_room() before tty_insert_flip_string() is unnecessary, costs CPU and for big buffers can mess up the multi-page allocation avoidance. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> CC: Alan Cox <alan@lxorguk.ukuu.org.uk>, stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15gigaset: correct clearing of at_state strings on RINGTilman Schmidt
In RING handling, clear the table of received parameter strings in a loop like everywhere else, instead of by enumeration which had already gotten out of sync. Impact: minor bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> CC: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15gigaset: avoid registering CAPI driver more than onceTilman Schmidt
Registering/unregistering the Gigaset CAPI driver when a device is connected/disconnected causes an Oops when disconnecting two Gigaset devices in a row, because the same capi_driver structure gets unregistered twice. Fix by making driver registration/unregistration a separate operation (empty in the ISDN4Linux case) called when the main module is loaded/unloaded. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> CC: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15obsolete config in kernel source: HSO_AUTOPMChristoph Egger
CONFIG_HSO_AUTOPM is set by KConfig / set in the Kernel source, makefiles and won't be ever set this way, therefor simply removing the protected code. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15obsolete config in kernel source: USE_INTERNAL_TIMERChristoph Egger
CONFIG_USE_INTERNAL_TIMER seems to be the remainings of some experiment. It is explicitely #undef-ed as not working, only referenced from one source file and rather aged. Hereby cleaning it from the kernel tree. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Acked-by: Roel Kluin <roel.kluin@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15atm: use for_each_set_bit()Akinobu Mita
Replace open-coded loop with for_each_set_bit(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15drivers/net: drop redundant memsetJulia Lawall
The region set by the call to memset is immediately overwritten by the subsequent call to memcpy. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15i4l: change magic numbers in Eicon DIVA ISDN driver to symbolic namesIan Munsie
Replace references to the '20' magic number found throughout the Eicon ISDN driver for the length of the station_id field in the T30_INFO struct with the T30_MAX_STATION_ID_LENGTH symbolic constant. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Cc: Armin Schindler <mac@melware.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15i4l: silence compiler warnings for array access in Eicon DIVA ISDN driverIan Munsie
When compiling this driver, the compiler throws the following warnings: drivers/isdn/hardware/eicon/message.c:8426: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8427: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8434: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8435: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8436: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8447: warning: array subscript is above array bounds This arises from the particular semantics the driver is using to write to the nlc array (static byte[256]). The array has a length in byte 0 followed by a T30_INFO struct starting at byte 1. The T30_INFO struct has a number of variable length strings after the station_id entry, which cannot be explicitly defined in the struct and the driver accesses them with an array index to station_id beyond the length of station_id. This patch merely changes the semantics that the driver uses to access the entries after the station_id entry to use the original 256 byte nlc array taking the offset and length of the station_id entry to calculate where to write in the array, thereby silencing the warning. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Cc: Armin Schindler <mac@melware.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15isdn: misplaced parenthesis in pof_handle_data()Roel Kluin
The parenthesis was misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15bnx2x: change smp_mb() comment to conform the trueStanislaw Gruszka
Access to fp->tx_bp_prod is protected by __netif_tx_lock, smp_mb() is not needed for that. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15bnx2x: remove not necessary compiler barrierStanislaw Gruszka
Access to fp->tx_bd_prod is protected by __netif_tx_lock, so we do not need any barrier for that. Update of fp->tx_bd_cons in bnx2x_tx_int() is not protected by lock, but barrier() nor smb_mb() in bnx2x_tx_avail() not guarantee we will see values that is written on other cpu. Ordering issues between netif_tx_stop_queue(), netif_tx_queue_stopped(), fp->tx_bd_cons = bd_cons and bnx2x_tx_avail() are already handled by smp_mb() in bnx2x_tx_int() and bnx2x_start_xmit(). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15bnx2x: use smp_mb() to keep ordering of read write operationsStanislaw Gruszka
Since we want to keep ordering of write to fp->bd_tx_cons and netif_tx_queue_stopped(txq), what is read of txq->state, we have to use general memory barrier. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15be2net: fix mccq create for big endian architecturesAjit Khaparde
The request to create an mccq was being dispatched without doing a byte swap of num_pages. This byte swap is necessary for Big Endian systems like PPC. Not having this fix leads mccq create to fail on BE ASICs running newer version of firmware, thereby causing driver initialization failure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15TI DaVinci EMAC: Convert to dev_pm_opschaithrika@ti.com
Migrate from the legacy PM hooks to use dev_pm_ops structure. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15net: davinci emac: use dma_{map, unmap}_single API for cache coherencySekhar Nori
The davinci emac driver uses some ARM specific DMA APIs for cache coherency which have been removed from kernel with the 2.6.34 merge. Modify the driver to use the dma_{map, unmap}_single() APIs defined in dma-mapping.h Without this fix, the driver fails to compile on Linus's tree. Tested on DM365 and OMAP-L138 EVMs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15e100: Fix ring parameter change handling regression.David S. Miller
When the PCI pool changes were added to fix resume failures: commit 98468efddb101f8a29af974101c17ba513b07be1 e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failu and commit 70abc8cb90e679d8519721e2761d8366a18212a6 e100: Fix broken cbs accounting due to missing memset. This introduced a problem that can happen if the TX ring size is increased. We need to size the PCI pool using cbs->max instead of the default cbs->count value. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-14Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits) ACPI: processor: push file static MADT pointer into internal map_madt_entry() ACPI: processor: refactor internal map_lsapic_id() ACPI: processor: refactor internal map_x2apic_id() ACPI: processor: refactor internal map_lapic_id() ACPI: processor: driver doesn't need to evaluate _PDC ACPI: processor: remove early _PDC optin quirks ACPI: processor: add internal processor_physically_present() ACPI: processor: move acpi_get_cpuid into processor_core.c ACPI: processor: export acpi_get_cpuid() ACPI: processor: mv processor_pdc.c processor_core.c ACPI: processor: mv processor_core.c processor_driver.c ACPI: plan to delete "acpi=ht" boot option ACPI: remove "acpi=ht" DMI blacklist PNPACPI: add bus number support PNPACPI: add window support resource: add window support resource: add bus number support resource: expand IORESOURCE_TYPE_BITS to make room for bus resource type acpiphp: Execute ACPI _REG method for hotadded devices ACPI video: Be more liberal in validating _BQC behaviour ...
2010-03-14init dynamic bin_attribute structuresWolfram Sang
Commit 6992f5334995af474c2b58d010d08bc597f0f2fe ("sysfs: Use one lockdep class per sysfs attribute.") introduced this requirement. First, at25 was fixed manually. Then, other occurences were found with coccinelle and the following semantic patch. Results were reviewed and fixed up: @ init @ identifier struct_name, bin; @@ struct struct_name { ... struct bin_attribute bin; ... }; @ main extends init @ expression E; statement S; identifier name, err; @@ ( struct struct_name *name; | - struct struct_name *name = NULL; + struct struct_name *name; ) ... ( sysfs_bin_attr_init(&name->bin); | + sysfs_bin_attr_init(&name->bin); if (sysfs_create_bin_file(E, &name->bin)) S | + sysfs_bin_attr_init(&name->bin); err = sysfs_create_bin_file(E, &name->bin); ) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-14Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', ↵Len Brown
'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
2010-03-14ACPI: processor: push file static MADT pointer into internal map_madt_entry()Alex Chiang
There's no real need for a pointer to the MADT to be global. The only function who uses it is map_madt_entry. This allows us to remove some more ugly #ifdefs. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: refactor internal map_lsapic_id()Alex Chiang
Un-nest the if statements for readability. Remove comments that re-state the obvious. Change the control flow so that we no longer need a temp variable. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: refactor internal map_x2apic_id()Alex Chiang
Untangle the nested if conditions to make this function look more similar to the other map_*apic_id() functions. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: refactor internal map_lapic_id()Alex Chiang
Untangle the if() statement a little for readability. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: driver doesn't need to evaluate _PDCAlex Chiang
Now that the early _PDC evaluation path knows how to correctly evaluate _PDC on only physically present processors, there's no need for the processor driver to evaluate it later when it loads. To cover the hotplug case, push _PDC evaluation down into the hotplug paths. Cc: x86@kernel.org Cc: Tony Luck <tony.luck@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 16:03:52 +0000