summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-05-20[media] tveeprom: update hauppauge tuner list thru 169Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add more info about known board configsAntti Palosaari
Add some comments about known GPIO settings of supported board versions. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for two byte I2C addressAntti Palosaari
After that Anysee I2C adapter is capable of one and two byte long I2C addresses in case of read from I2C bus. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: enhance demod and tuner attachAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix E30 Combo Plus TDA18212 DVB-TAntti Palosaari
Use correct I2C address for ZL10353 DVB-T demod. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix E30 Combo Plus TDA18212 GPIOAntti Palosaari
Looks like it is IF route switch on IOE[0]. Set it correctly to route signal from tuner to demod. Now it works for DVB-C too. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for Anysee E7 TCAntti Palosaari
It is ZL10353, TDA10023 and TDA18212. Tuner is inside of Samsung DNOD44CDH086A tuner module. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for TDA18212 based E30 Combo PlusAntti Palosaari
New models have new NXP TDA18212 silicon tuner. Not tested yet due to lack of HW... Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: reimplement demod and tuner attachAntti Palosaari
Use board ID as base value when selecting correct hardware configuration. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: change some messagesAntti Palosaari
Print firmware version as two digit long (change from 3 to 2). Windows app have changed that too. First byte was hard coded as 0. Change email list address to report non-working device to current one. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix multibyte I2C readAntti Palosaari
It can read more than one byte from I2C bus. Allow that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: I2C address fixAntti Palosaari
Switch from 8 bit notation to real 7 bit. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] NXP TDA18212HN silicon tuner driverAntti Palosaari
New silicon tuner driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] cx18: Bump driver version, since a new class of HVR-1600 is properly ↵Andy Walls
supported Make a user visible driver version change, for the inevitable user support questions about why newer model HVR-1600's do not work with (older versions of) the cx18 driver. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] cx18: Make RF analog TV work for newer HVR-1600 models with silicon ↵Andy Walls
tuners A previous changes which added the newer model HVR-1600's and DTV support for them, neglected to add RF analog TV for them. Fix RF analog TV for the newer HVR-1600's which have a worldwide analog tuner assembly with a TDA18271 tuner and TDA8295 demodulator. Thanks go to Jeff Campbell and Mike Bradley for reproting the problem, and also to Mike Bradley for doing a lot of the legwork to figure out the tuner reset GPIO line, the demodulator I2C address, and that the GPIOs have to be reinitialized after a cardtype switch. Reported-by: Jeff Campbell <jac1dlists@gmail.com> Tested-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: use mutex instead of semaphoreMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] Remove the now obsolete drx397xDMauro Carvalho Chehab
This was replaced by Micronas drxd driver Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20HID: hid-multitouch: class MT_CLS_STANTUM is redundant with MT_CLS_CONFIDENCEBenjamin Tissoires
Stantum devices used to work with MT_CLS_STANTUM but MT_CLS_CONFIDENCE is exactly the same. This patch switches them to this generic class, and remove the unused MT_CLS_STANTUM. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for Unitec panelsBenjamin Tissoires
This patch introduce support for Unitec panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for Touch International panelsBenjamin Tissoires
This patch introduce support for Touch International panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for GoodTouch panelsBenjamin Tissoires
This patch introduce support for GoodTouch panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for CVTouch panelsBenjamin Tissoires
This patch introduce support for CVTouch panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for ActionStar panelsBenjamin Tissoires
This patch introduce support for ActionStar panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20[media] drxd: CodingStyle cleanupsMauro Carvalho Chehab
There are still lots of 80-columns warnings and a few errors at some tables, but changing them would require more work and with probably not much gain. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: Don't use a macro for CHK_ERROR with a break insideMauro Carvalho Chehab
The macro is defined as: #define CHK_ERROR(s) if( (status = s)<0 ) break This sucks, as makes harder to debug if something got wrong and there are more than one level of loops. Also, violates CodingStyle. Fixed by this simple perl script: while (<>) { $f.=$_; }; $f=~ s,\n\#define CHK_ERROR[^\n]+\n,\n,; $f=~ s=(CHK_ERROR\(.*\,)\n\s+=\1 =g; $f=~ s=(CHK_ERROR\(.*\,)\n\s+=\1 =g; $f=~ s=(CHK_ERROR\(.*\,)\n\s+=\1 =g; $f=~ s=(CHK_ERROR\(.*)\s+(\,)\n\s+=\1\2 =g; $f=~ s=(CHK_ERROR\(.*)\s+(\,)\n\s+=\1\2 =g; $f=~ s=(CHK_ERROR\(.*)\s+(\,)\n\s+=\1\2 =g; $f=~ s,\n(\t+)CHK_ERROR\((.*)\)\;,\n\1status = \2;\n\1if (status < 0)\n\1\tbreak;,g; print $f; Plus a few manual adjustments Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: Fix some CodingStyle issuesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: don't re-define u8/u16/u32 typesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd_map_firm.h: Remove unused linesMauro Carvalho Chehab
This file is big. It has 12000+ lines! Most of the defined stuff aren't used anyware inside the driver, so we can just remove most of the lines and still keep everything that have any interest for the driver. If anyone ever need the other devices, it will be stored at git logs, so it is easy to recover. The diff result is impressive: 1 files changed, 1013 insertions(+), 12694 deletions(-) rewrite drivers/media/dvb/frontends/drxd_map_firm.h (90%) As a sideback effect, drxd driver will likely compile faster, and checkpatch.pl can run on this file without taking (literally) hours. The code cleanup was done using this small script: $ for i in `perl -ne 'print "$1\n" if (m/define\s+([^\s+]+)/)' drxd_map_firm.h`; do if [ "`grep $i drivers/media/dvb/frontends/drxd*.[ch]`" != "" ] ; then echo $i; fi; done|sort|uniq >used_symbols $ grep -f used_symbols drxd_map_firm.h >defines And then deleting the old #define lines, replacing by "defines" file content. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd_map_firm.h: make checkpatch.pl happierMauro Carvalho Chehab
s/(define\s+[^\s]+)\s........../\1/ Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: Run lindent across sourcesDevin Heitmueller
Take a first cleanup pass over the sources to bring them closer to the Linux coding style. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] em28xx: add remote control support for PCTV 330eDevin Heitmueller
Add support for the PCTV 330e remote control Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] em28xx: remove "not validated" flag for PCTV 330eDevin Heitmueller
Remove the flag indicating the 330e board is not validated, based on the half dozen users who have reported today that everything is working. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: move firmware to binary blobDevin Heitmueller
Abstract out the firmware for the drx-d so that it can be loaded by the request_firmware() interface. The firmware licensing permits free redistribution, and can be found here: http://kernellabs.com/firmware/drxd Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] em28xx: add digital support for PCTV 330eDevin Heitmueller
Add the calls necessary to use the new drx-d driver for the PCTV 330e Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] em28xx: include model number for PCTV 330eDevin Heitmueller
Given how PCTV has multiple products with the same model name, include the model number in the description and #define to make it a little more clear. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] em28xx: fix GPIO problem with HVR-900R2 getting out of sync with drx-dDevin Heitmueller
The em28xx bridge strobes the reset pin on the drx-d on every ts_ctrl call. This results in the state of the chip getting out of the sync with the state of the driver (and hence all tuning requests after the first one fail). Make sure the drx-d is not being held in reset, but don't actually perform a hardware reset on the chip. The GPIO block has been split out from the other HVR-9x0 variants to reduce the risk of regression, although in theory they would not have any issues since none of those cases have the frontend driver managing any internal state. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: provide ability to disable the i2c gate control functionDevin Heitmueller
If the tuner is not actually behind an i2c gate, using the i2c gate control function can wedge the i2c bus. Provide the ability to control on a per-board basis whether it should be used. Problem was noticed on the HVR-900 R2, where it resulted in the first tuning attempt succeeding, and then all subsequent attempts to access the xc3028 being treated as failures (including the call to sleep the tuner). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] em28xx: auto-select drx-k if CUSTOMISE is not setMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] em28xx: enable support for the drx-d on the HVR-900 R2Devin Heitmueller
Add the required board initialization required for the drx-d to work with the 900R2. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: provide ability to control rs byteDevin Heitmueller
Provide the ability for the board configuration to specify whether to insert the RS byte into the TS interconnect to the bridge, while not required for the ngene in fact is required for the em28xx. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: add driver to Makefile and KconfigDevin Heitmueller
Add the drxd to the Makefile and Kconfig Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20drx: add initial drx-d driverRalph Metzler
These are the original drx-d sources, extracted from Ralph Metzler's GPL'd ngene driver. No modifications/cleanup have yet been made. In fact, no measures have been taken to see if the code even compiles. Signed-off-by Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] mantis: trivial module parameter documentation fixBjørn Mork
The default for "verbose" is 0. Update description to match. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] use pci_dev->revisionBjørn Mork
pci_setup_device() has saved the PCI revision in the pci_dev struct since Linux 2.6.23. Use it. Cc: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] xc5000: Improve it to work better with 6MHz-spaced channelsMauro Carvalho Chehab
Brazil uses 6MHz-spaced channels. So, the nyquist filter for DVB-C should be different, otherwise, inter-channel interference may badly affect the device, and signal may not be properly decoded. On my tests here, without this patch, sometimes channels are seen, but, most of the time, PID filter returns with timeout. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] DM04/QQBOX Fix issue with firmware release and cold resetMalcolm Priestley
Fix issue where firmware does not release on cold reset. Also, default firmware never cold resets in multi tuner environment. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20drm/radeon/kms: fixup eDP connector handlingAlex Deucher
It's more like LVDS then DP in some ways. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: bail early for eDP in hotplug callbackAlex Deucher
Don't try and en/disable the port as it may be a hpd event from powering up/down the panel during a modeset or dpms. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: simplify hotplug handler logicAlex Deucher
In the hotplug handler, just use the drm dpms functions. If the monitor is plugged in, turn it on, if it's not, turn it off. This also reduces power usage by turning off the encoder and crtc when the monitor is unplugged. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: rewrite DP handlingAlex Deucher
- reorganize the functions based on use - clean up function naming - rework link training to better match what we use internally - add initial support for DP 1.2 (no MST yet) Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 14:10:21 +0000