| Age | Commit message (Collapse) | Author |
|---|
|
Added missing release callback for file_operations mptctl_fops.
Without release callback there will be never freed. It remains on
mptctl's eent list even after the file is closed and released.
Relavent RHEL bugzilla is 660871
Cc: stable@kernel.org
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
This patch moves a large number of memory release paths inside of the
configfs callback target_core_hba_item_ops->release() called from
within fs/configfs/item.c: config_item_cleanup() context. This patch
resolves the SLUB 'Poison overwritten' warnings.
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
This patch removes the legacy procfs based target_core_mib.c code,
and moves the necessary scsi_index_tables functions and defines into
target_core_transport.c and target_core_base.h code to allow existing
fabric independent statistics to function.
This includes the removal of a handful of 'atomic_t mib_ref_count'
counters used in struct se_node_acl, se_session and se_hba to prevent
removal while using seq_list procfs walking logic.
[jejb: fix up compile failures]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
This patch fixes a bug introduced during the v4 control CDB emulation
refactoring that broke SCF_SCSI_CONTROL_SG_IO_CDB operation within
transport_map_control_cmd_to_task(). It moves the BUG_ON() into
transport_do_se_mem_map() after the TRANSPORT(dev)->do_se_mem_map()
RAMDISK_DR special case, and adds the proper struct se_mem assignment
when !list_empty() for normal non RAMDISK_DR backend device cases.
Reported-by: Kai-Thorsten Hambrecht <kai@hambrecht.org>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
This patch fixes two bugs uncovered during testing with
slub_debug=FPUZ during module_exit() -> target_core_exit_configfs()
with release of configfs subsystem consumer default groups, namely how
this should be working with
fs/configfs/dir.c:configfs_unregister_subsystem() release logic for
struct config_group->default_group.
The first issue involves configfs_unregister_subsystem() expecting to
walk+drain the top-level subsys->su_group.default_groups directly in
unlink_group(), and not directly from the configfs subsystem consumer
for the top level struct config_group->default_groups. This patch
drops the walk+drain of subsys->su_group.default_groups from TCM
configfs subsystem consumer code, and moves the top-level
->default_groups kfree() after configfs_unregister_subsystem() has
been called.
The second issue involves calling
core_alua_free_lu_gp(se_global->default_lu_gp) to release the
default_lu_gp->lu_gp_group before configfs_unregister_subsystem() has
been called. This patches also moves the core_alua_free_lu_gp() call
to release default_lu_group->lu_gp_group after the subsys has been
unregistered.
Finally, this patch explictly clears the
[lu_gp,alua,hba]_cg->default_groups pointers after kfree() to ensure
that no stale memory is picked up from child struct
config_group->default_group[] while configfs_unregister_subsystem() is
called.
Reported-by: Fubo Chen <fubo.chen@gmail.com>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
The struct se_node_acl->device_list_lock needs to be released if either
sanity check for struct se_dev_entry->se_lun_acl or deve->se_lun fails.
Signed-off-by: Fubo Chen <fubo.chen@gmail.com>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
This patch fixes a bug in core_update_device_list_for_node() where
individual demo-mode generated MappedLUN's UA + Persistent
Reservations metadata where being leaked, instead of falling through
and calling existing core_scsi3_ua_release_all() and
core_scsi3_free_pr_reg_from_nacl() at the end of
core_update_device_list_for_node().
This bug would manifest itself with the following OOPs w/ TPG
demo-mode endpoints (tfo->tpg_check_demo_mode()=1), and PROUT
REGISTER+RESERVE -> explict struct se_session logout -> struct
se_device shutdown:
[ 697.021139] LIO_iblock used greatest stack depth: 2704 bytes left
[ 702.235017] general protection fault: 0000 [#1] SMP
[ 702.235074] last sysfs file: /sys/devices/virtual/net/lo/operstate
[ 704.372695] CPU 0
[ 704.372725] Modules linked in: crc32c target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs sr_mod cdrom sd_mod ata_piix mptspi mptscsih libata mptbase [last unloaded: iscsi_target_mod]
[ 704.375442]
[ 704.375563] Pid: 4964, comm: tcm_node Not tainted 2.6.37+ #1 440BX Desktop Reference Platform/VMware Virtual Platform
[ 704.375912] RIP: 0010:[<ffffffffa00aaa16>] [<ffffffffa00aaa16>] __core_scsi3_complete_pro_release+0x31/0x133 [target_core_mod]
[ 704.376017] RSP: 0018:ffff88001e5ffcb8 EFLAGS: 00010296
[ 704.376017] RAX: 6d32335b1b0a0d0a RBX: ffff88001d952cb0 RCX: 0000000000000015
[ 704.376017] RDX: ffff88001b428000 RSI: ffff88001da5a4c0 RDI: ffff88001e5ffcd8
[ 704.376017] RBP: ffff88001e5ffd28 R08: ffff88001e5ffcd8 R09: ffff88001d952080
[ 704.377116] R10: ffff88001dfc5480 R11: ffff88001df8abb0 R12: ffff88001d952cb0
[ 704.377319] R13: 0000000000000000 R14: ffff88001df8abb0 R15: ffff88001b428000
[ 704.377521] FS: 00007f033d15c6e0(0000) GS:ffff88001fa00000(0000) knlGS:0000000000000000
[ 704.377861] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 704.378043] CR2: 00007fff09281510 CR3: 000000001e5db000 CR4: 00000000000006f0
[ 704.378110] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 704.378110] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 704.378110] Process tcm_node (pid: 4964, threadinfo ffff88001e5fe000, task ffff88001d99c260)
[ 704.378110] Stack:
[ 704.378110] ffffea0000678980 ffff88001da5a4c0 ffffea0000678980 ffff88001f402b00
[ 704.378110] ffff88001e5ffd08 ffffffff810ea236 ffff88001e5ffd18 0000000000000282
[ 704.379772] ffff88001d952080 ffff88001d952cb0 ffff88001d952cb0 ffff88001dc79010
[ 704.380082] Call Trace:
[ 704.380220] [<ffffffff810ea236>] ? __slab_free+0x89/0x11c
[ 704.380403] [<ffffffffa00ab781>] core_scsi3_free_all_registrations+0x3e/0x157 [target_core_mod]
[ 704.380479] [<ffffffffa00a752b>] se_release_device_for_hba+0xa6/0xd8 [target_core_mod]
[ 704.380479] [<ffffffffa00a7598>] se_free_virtual_device+0x3b/0x45 [target_core_mod]
[ 704.383750] [<ffffffffa00a3177>] target_core_drop_subdev+0x13a/0x18d [target_core_mod]
[ 704.384068] [<ffffffffa00960db>] client_drop_item+0x25/0x31 [configfs]
[ 704.384263] [<ffffffffa00967b5>] configfs_rmdir+0x1a1/0x223 [configfs]
[ 704.384459] [<ffffffff810fa8cd>] vfs_rmdir+0x7e/0xd3
[ 704.384631] [<ffffffff810fc3be>] do_rmdir+0xa3/0xf4
[ 704.384895] [<ffffffff810eed15>] ? filp_close+0x67/0x72
[ 704.386485] [<ffffffff810fc446>] sys_rmdir+0x11/0x13
[ 704.387893] [<ffffffff81002a92>] system_call_fastpath+0x16/0x1b
[ 704.388083] Code: 4c 8d 45 b0 41 56 49 89 d7 41 55 41 89 cd 41 54 b9 15 00 00 00 53 48 89 fb 48 83 ec 48 4c 89 c7 48 89 75 98 48 8b 86 28 01 00 00 <48> 8b 80 90 01 00 00 48 89 45 a0 31 c0 f3 aa c7 45 ac 00 00 00
[ 704.388763] RIP [<ffffffffa00aaa16>] __core_scsi3_complete_pro_release+0x31/0x133 [target_core_mod]
[ 704.389142] RSP <ffff88001e5ffcb8>
[ 704.389572] ---[ end trace 2a3614f3cd6261a5 ]---
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
This patch adds an explict check for struct iblock_dev->ibd_bd in
iblock_free_device() before calling blkdev_put(), which will otherwise hit
the following NULL pointer dereference @ ib_dev->ibd_bd when iblock_create_virtdevice()
fails to claim an already in-use struct block_device via blkdev_get_by_path().
[ 112.528578] Target_Core_ConfigFS: Allocated struct se_subsystem_dev: ffff88001e750000 se_dev_su_ptr: ffff88001dd05d70
[ 112.534681] Target_Core_ConfigFS: Calling t->free_device() for se_dev_su_ptr: ffff88001dd05d70
[ 112.535029] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[ 112.535029] IP: [<ffffffff814987a3>] mutex_lock+0x14/0x35
[ 112.535029] PGD 1e5d0067 PUD 1e274067 PMD 0
[ 112.535029] Oops: 0002 [#1] SMP
[ 112.535029] last sysfs file: /sys/devices/pci0000:00/0000:00:07.1/host2/target2:0:0/2:0:0:0/type
[ 112.535029] CPU 0
[ 112.535029] Modules linked in: iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs sr_mod cdrom sd_mod ata_piix mptspi mptscsih libata mptbase [last unloaded: scsi_wait_scan]
[ 112.535029]
[ 112.535029] Pid: 3345, comm: python2.5 Not tainted 2.6.37+ #1 440BX Desktop Reference Platform/VMware Virtual Platform
[ 112.535029] RIP: 0010:[<ffffffff814987a3>] [<ffffffff814987a3>] mutex_lock+0x14/0x35
[ 112.535029] RSP: 0018:ffff88001e6d7d58 EFLAGS: 00010246
[ 112.535029] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000082
[ 112.535029] RDX: ffff88001e6d7fd8 RSI: 0000000000000083 RDI: 0000000000000020
[ 112.535029] RBP: ffff88001e6d7d68 R08: 0000000000000000 R09: 0000000000000000
[ 112.535029] R10: ffff8800000be860 R11: ffff88001f420000 R12: 0000000000000020
[ 112.535029] R13: 0000000000000083 R14: ffff88001d809430 R15: ffff88001d8094f8
[ 112.535029] FS: 00007ff17ca7d6e0(0000) GS:ffff88001fa00000(0000) knlGS:0000000000000000
[ 112.535029] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 112.535029] CR2: 0000000000000020 CR3: 000000001e5d2000 CR4: 00000000000006f0
[ 112.535029] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 112.535029] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 112.535029] Process python2.5 (pid: 3345, threadinfo ffff88001e6d6000, task ffff88001e2d0760)
[ 112.535029] Stack:
[ 112.535029] ffff88001e6d7d88 0000000000000000 ffff88001e6d7d98 ffffffff811187fc
[ 112.535029] ffff88001d809430 ffff88001dd05d70 ffff88001e750860 ffff88001e750000
[ 112.535029] ffff88001e6d7db8 ffffffffa00e3757 ffff88001e6d7db8 0000000000000004
[ 112.535029] Call Trace:
[ 112.535029] [<ffffffff811187fc>] blkdev_put+0x28/0x107
[ 112.535029] [<ffffffffa00e3757>] iblock_free_device+0x1d/0x36 [target_core_iblock]
[ 112.535029] [<ffffffffa00a319c>] target_core_drop_subdev+0x15f/0x18d [target_core_mod]
[ 112.535029] [<ffffffffa00960db>] client_drop_item+0x25/0x31 [configfs]
[ 112.535029] [<ffffffffa00967b5>] configfs_rmdir+0x1a1/0x223 [configfs]
[ 112.535029] [<ffffffff810fa8cd>] vfs_rmdir+0x7e/0xd3
[ 112.535029] [<ffffffff810fc3be>] do_rmdir+0xa3/0xf4
[ 112.535029] [<ffffffff810fc446>] sys_rmdir+0x11/0x13
[ 112.535029] [<ffffffff81002a92>] system_call_fastpath+0x16/0x1b
[ 112.535029] Code: 8b 04 25 88 b5 00 00 48 2d d8 1f 00 00 48 89 43 18 31 c0 5e 5b c9 c3 55 48 89 e5 53 48 89 fb 48 83 ec 08 e8 c4 f7 ff ff 48 89 df <3e> ff 0f 79 05 e8 1e ff ff ff 65 48 8b 04 25 88 b5 00 00 48 2d
[ 112.535029] RIP [<ffffffff814987a3>] mutex_lock+0x14/0x35
[ 112.535029] RSP <ffff88001e6d7d58>
[ 112.535029] CR2: 0000000000000020
[ 132.679636] ---[ end trace 05754bb48eb828f0 ]---
Note it also adds an second explict check for ib_dev->ibd_bio_set before calling
bioset_free() to fix the same possible NULL pointer deference during an early
iblock_create_virtdevice() failure.
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
blkdev_get_by_path() returns an ERR_PTR() or error and it doesn't return
a NULL. It looks like this bug would be easy to trigger by mistake.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
corruption
If I create a scsi_debug device that is larger than 4GB, the multiplication of
(block * scsi_debug_sector_size) can produce a 64-bit value. Unfortunately,
the compiler sees two 32-bit quantities and performs a 32-bit multiplication,
thus truncating the bits above 2^32. This causes the wrong memory location to
be read or written. Change block and rest to be unsigned long long.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
Make the driver safer by using irqsave/irqrestore with host_lock.
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
There is a small race window in qla2x00_do_dpc() between
checking for kthread_should_stop() and going to sleep after
setting TASK_INTERRUPTIBLE. If qla2x00_free_device() is called
in this window, kthread_stop will wait forever because there
will be no one to wake up the process.
Fix by making sure we only set TASK_INTERRUPTIBLE before checking
kthread_stop().
Reported-by: Bandan Das <bandan.das@stratus.com>
Acked-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
amd64_edac: Fix DIMMs per DCTs output
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
hwmon: (emc1403) Fix I2C address range
hwmon: (lm63) Consider LM64 temperature offset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
pci: use security_capable() when checking capablities during config space read
security: add cred argument to security_capable()
tpm_tis: Use timeouts returned from TPM
|
|
This code makes two calls to clk_get, then test both return values and
fails if either failed.
The problem is that in the first inner if, where the first call to
clk_get has failed, it don't know if the second call has failed as well.
So it don't know whether clk_get should be called on the result of the
second call. Of course, it would be possible to test that value again.
A simpler solution is just to test the result of calling clk_get
directly after each call.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
position p1,p2;
expression e;
statement S;
@@
e = clk_get@p1(...)
...
if@p2 (IS_ERR(e)) S
@@
expression e;
statement S;
identifier l;
position r.p1, p2 != r.p2;
@@
*e = clk_get@p1(...)
... when != clk_put(e)
*if@p2 (...)
{
... when != clk_put(e)
* return ...;
}// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 2a48fc0ab242417 ("block: autoconvert trivial BKL users to private
mutex") replaced uses of the BKL in the nbd driver with mutex
operations. Since then, I've been been seeing these lock ups:
INFO: task qemu-nbd:16115 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qemu-nbd D 0000000000000001 0 16115 16114 0x00000004
ffff88007d775d98 0000000000000082 ffff88007d775fd8 ffff88007d774000
0000000000013a80 ffff8800020347e0 ffff88007d775fd8 0000000000013a80
ffff880133730000 ffff880002034440 ffffea0004333db8 ffffffffa071c020
Call Trace:
[<ffffffff815b9997>] __mutex_lock_slowpath+0xf7/0x180
[<ffffffff815b93eb>] mutex_lock+0x2b/0x50
[<ffffffffa071a21c>] nbd_ioctl+0x6c/0x1c0 [nbd]
[<ffffffff812cb970>] blkdev_ioctl+0x230/0x730
[<ffffffff811967a1>] block_ioctl+0x41/0x50
[<ffffffff81175c03>] do_vfs_ioctl+0x93/0x370
[<ffffffff81175f61>] sys_ioctl+0x81/0xa0
[<ffffffff8100c0c2>] system_call_fastpath+0x16/0x1b
Instrumenting the nbd module's ioctl handler with some extra logging
clearly shows the NBD_DO_IT ioctl being invoked which is a long-lived
ioctl in the sense that it doesn't return until another ioctl asks the
driver to disconnect. However, that other ioctl blocks, waiting for the
module-level mutex that replaced the BKL, and then we're stuck.
This patch removes the module-level mutex altogether. It's clearly
wrong, and as far as I can see, it's entirely unnecessary, since the nbd
driver maintains per-device mutexes, and I don't see anything that would
require a module-level (or kernel-level, for that matter) mutex.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Paul Clements <paul.clements@steeleye.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org> [2.6.37.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In file drivers/rtc/rtc-proc.c seq_open() can return -ENOMEM.
86 if (!try_module_get(THIS_MODULE))
87 return -ENODEV;
88
89 return single_open(file, rtc_proc_show, rtc);
In this case before exiting (line 89) from rtc_proc_open the
module_put(THIS_MODULE) must be called.
Found by Linux Device Drivers Verification Project
Signed-off-by: Alexander Strakh <strakh@ispras.ru>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a mutex to register communication and handling. Without the mutex,
GPIOs didn't switch as expected when toggled in a fast sequence of
status changes of multiple outputs.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Eric Paris noted that commit de139a3 ("pci: check caps from sysfs file
open to read device dependent config space") caused the capability check
to bypass security modules and potentially auditing. Rectify this by
calling security_capable() when checking the open file's capabilities
for config space reads.
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
git://tpmdd.git.sourceforge.net/gitroot/tpmdd/tpmdd into for-linus
|
|
The current TPM TIS driver in git discards the timeout values returned
from the TPM. The check of the response packet needs to consider that
the return_code field is 0 on success and the size of the expected
packet is equivalent to the header size + u32 length indicator for the
TPM_GetCapability() result + 3 timeout indicators of type u32.
I am also adding a sysfs entry 'timeouts' showing the timeouts that are
being used.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
|
|
This patch fixes an OOPS triggered when calling modprobe ipmi_si a
second time after the first modprobe returned without finding any ipmi
devices. This can happen if you reload the module after having the
first module load fail. The driver was not deregistering from PNP in
that case.
Peter Huewe originally reported this patch and supplied a fix, I have a
different patch based on Linus' suggestion that cleans things up a bit
more.
Cc: stable@kernel.org
Cc: openipmi-developer@lists.sourceforge.net
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (21 commits)
USB: cdc-acm: Adding second ACM channel support for Nokia N8
USB, Mass Storage, composite, gadget: Fix build failure and memset of a struct
USB: Fix trout build failure with ci13xxx_msm gadget
USB: EHCI: fix scheduling while atomic during suspend
USB: usb-storage: unusual_devs entry for Coby MP3 player
USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrograph
USB: fix race between root-hub resume and wakeup requests
USB: prevent buggy hubs from crashing the USB stack
usb: r8a66597-udc: Fixed bufnum of Bulk
USB: ftdi_sio: add ST Micro Connect Lite uart support
USB: Storage: Add unusual_devs entry for VTech Kidizoom
USB SL811HS HCD: Fix memory leak in sl811h_urb_enqueue()
USB: ti_usb: fix module removal
USB: io_edgeport: fix the reported firmware major and minor
usb: ehci-omap: Show fatal probing time errors to end user
usb: musb: introduce api for dma code to check compatibility with usb request
usb: musb: maintain three states for buffer mappings instead of two
usb: musb: disable double buffering when it's broken
usb: musb: hsdma: change back to use musb_read/writew
usb: musb: core: fix IRQ check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
serial: bfin_5xx: split uart RX lock from uart port lock to avoid deadlock
68360serial: Plumb in rs_360_get_icount()
n_gsm: copy mtu over when configuring via ioctl interface
virtio: console: Move file back to drivers/char/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
staging: zram: fix data corruption issue
Staging: Comedi: Fix a few NI module dependencies
Staging: comedi: Add MODULE_LICENSE and similar to NI modules
staging: brcm80211: bugfix for softmac crash on multi cpu configurations
staging: sst: Fix for dmic capture on v2 pmic
staging: hv: Enable sending GARP packet after live migration
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
virtio_net: Add schedule check to napi_enable call
x25: Do not reference freed memory.
pch_can: fix tseg1/tseg2 setting issue
isdn: hysdn: Kill (partially buggy) CVS regision log reporting.
can: softing_cs needs slab.h
pch_gbe: Fix the issue which a driver locks when rx offload is set by ethtool
netfilter: nf_conntrack: set conntrack templates again if we return NF_REPEAT
pch_can: fix module reload issue with MSI
pch_can: fix rmmod issue
pch_can: fix 800k comms issue
net: Fix lockdep regression caused by initializing netdev queues too early.
net/caif: Fix dangling list pointer in freed object on error.
USB CDC NCM errata updates for cdc_ncm host driver
CDC NCM errata updates for cdc.h
ixgbe: update version string
ixgbe: cleanup variable initialization
ixgbe: limit VF access to network traffic
ixgbe: fix for 82599 erratum on Header Splitting
ixgbe: fix variable set but not used warnings by gcc 4.6
e1000: add support for Marvell Alaska M88E1118R PHY
...
|
|
Under harsh testing conditions, including low memory, the guest would
stop receiving packets. With this patch applied we no longer see any
problems in the driver while performing these tests for extended periods
of time.
Make sure napi is scheduled subsequent to each napi_enable.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Signed-off-by: Olaf Kirch <okir@suse.de>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
amd64_debug_display_dimm_sizes() reports the distribution of the DIMMs
on each DRAM controller and its chip select sizes. Thus, the last don't
have anything to do with whether we're running in ganged DCT mode or not
- their sizes don't change all of a sudden. Fix that by removing the
ganged-check and dump DCT0's config for DCT1 when in ganged mode since
they're identical.
Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Previous patch "[PATCH 1/3] pch_can: fix 800k comms issue" is wrong.
I should have modified tseg1_min not tseg2_min.
This patch reverts tseg2_min to 1 and set tseg1_min to 2.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some cases try to modify const strings, and in any event the
CVS revision strings have not changed in over ten years making
these printouts completely worthless.
Just kill all of this stuff off.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I2C address range included 0x2a, which the chips do not support.
Replace with 0x29 which is supported but was missing.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
LM64 has 16 degrees Celsius temperature offset on all
remote sensor registers.
This was not considered When LM64 support was added to lm63.c.
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
|
|
From: Randy Dunlap <randy.dunlap@oracle.com>
softing_cs.c uses kzalloc & kfree, so it needs to include linux/slab.h.
drivers/net/can/softing/softing_cs.c:234: error: implicit declaration of function 'kfree'
drivers/net/can/softing/softing_cs.c:271: error: implicit declaration of function 'kzalloc'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver will be in a deadlock, When the rx offload is set by ethtool.
The pch_gbe_reinit_locked function was modified.
Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
virtio: console: Update Copyright
virtio: console: Wake up outvq on host notifications
|
|
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cdrom: support devices that have check_events but not media_changed
cfq-iosched: Don't wait if queue already has requests.
blkio-throttle: Avoid calling blkiocg_lookup_group() for root group
cfq: rename a function to give it more appropriate name
cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily.
drivers/block/aoe/Makefile: replace the use of <module>-objs with <module>-y
loop: queue_lock NULL pointer derefence in blk_throtl_exit
drivers/block/Makefile: replace the use of <module>-objs with <module>-y
blktrace: Don't output messages if NOTIFY isn't set.
|
|
* 'for-linus' of git://neil.brown.name/md:
FIX: md: process hangs at wait_barrier after 0->10 takeover
md_make_request: don't touch the bio after calling make_request
md: Don't allow slot_store while resync/recovery is happening.
md: don't clear curr_resync_completed at end of resync.
md: Don't use remove_and_add_spares to remove failed devices from a read-only array
Add raid1->raid0 takeover support
md: Remove the AllReserved flag for component devices.
md: don't abort checking spares as soon as one cannot be added.
md: fix the test for finding spares in raid5_start_reshape.
md: simplify some 'if' conditionals in raid5_start_reshape.
md: revert change to raid_disks on failure.
|
|
In zram_read() and zram_write() we were not incrementing the
index number and thus were reading/writing values from/to
incorrect sectors on zram disk, resulting in data corruption.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The ni_tio and ni_tio modules do not depend on the 8255 module, but the
ni_atmio, ni_mio_cs and ni_pcimio modules do need the 8255 module. The
ni_pcimio module also needs the comedi_fc module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
As mentioned by W. Trevor King on the devel@linuxdriverproject.org list
on "Thu, 27 Jan 2011 18:52:15 -0500", "Message-ID:
<20110127235214.GA5107@thialfi.dhcp.drexel.edu>", the ni_pcimio module
is missing module metadata, including a license.
This patch adds module metadata to all the NI comedi driver modules. It
also removes a duplicate MODULE_LICENSE("GPL") line from the "mite"
module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: W. Trevor King <wking@drexel.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Commit 93aae17af1172c40c6f74b7294e93a90c3cfaa5d ("sr: implement
sr_check_events()") replaced the media_changed op with the
check_events op in drivers/scsi/sr.c
All users that check for the CDC_MEDIA_CHANGED capbility try both
the check_events op and the media_changed op, but register_cdrom()
was requiring media_changed.
This patch fixes the capability checking.
The cdrom_select_disc ioctl is also using the two operations, so
they should be required for CDC_SELECT_DISC too.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Currently, in case reload pch_can,
pch_can not to be able to catch interrupt.
The cause is bus-master is not set in pch_can.
Thus, add enabling bus-master processing.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when rmmod pch_can, kernel failure occurs.
The cause is pci_iounmap executed before pch_can_reset.
Thus pci_iounmap moves after pch_can_reset.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, 800k comms fails since prop_seg set zero.
(EG20T PCH CAN register of prop_seg must be set more than 1)
To prevent prop_seg set to zero, change tseg2_min 1 to 2.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Specification links:
- CDC NCM errata link:
http://www.usb.org/developers/devclass_docs/NCM10_012011.zip
- CDC and WMC errata link:
http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip
Changes:
- driver updated to match cdc.h header with errata changes
- added support for USB_CDC_SET_NTB_INPUT_SIZE control request with
8 byte length
- fixes to comply with specification: send only control requests supported by
device, set number of datagrams for IN direction, connection speed structure
update, etc.
- packet loss fixed for tx direction; misleading flag renamed.
- adjusted hard_mtu value.
Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The outvq needs to be woken up on host notifications so that buffers
consumed by the host can be reclaimed, outvq freed, and application
writes may proceed again.
The need for this is now finally noticed when I have qemu patches ready
to use nonblocking IO and flow control.
CC: Hans de Goede <hdegoede@redhat.com>
CC: stable@kernel.org
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
|
