summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-06-27Staging: mei: fix suspend failureTomas Winkler
wait_event_interruptible_timeout return value was wrongly used. The remaining timeout was used as the error code. This fix translated wait_event_interruptible_timeout return value into error code that can be propagated. [10291.674121] pci_pm_suspend(): mei_pci_suspend+0x0/0x8b [mei] returns 2500 It's thinkpad t400 with 00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07) Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-27Staging: fix iio builds when IIO_RING_BUFFER is not enabledRandy Dunlap
Fix build by moving enum list outside of #ifdef CONFIG_IIO_RING_BUFFER. drivers/staging/iio/accel/adis16201_core.c:413: error: 'ADIS16201_SCAN_SUPPLY' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:417: error: 'ADIS16201_SCAN_TEMP' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:422: error: 'ADIS16201_SCAN_ACC_X' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:427: error: 'ADIS16201_SCAN_ACC_Y' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:432: error: 'ADIS16201_SCAN_AUX_ADC' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:436: error: 'ADIS16201_SCAN_INCLI_X' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:441: error: 'ADIS16201_SCAN_INCLI_Y' undeclared here (not in a function) vers/staging/iio/accel/adis16203_core.c:374: error: 'ADIS16203_SCAN_SUPPLY' undeclared here (not in a function) drivers/staging/iio/accel/adis16203_core.c:378: error: 'ADIS16203_SCAN_AUX_ADC' undeclared here (not in a function) drivers/staging/iio/accel/adis16203_core.c:382: error: 'ADIS16203_SCAN_INCLI_X' undeclared here (not in a function) drivers/staging/iio/accel/adis16203_core.c:388: error: 'ADIS16203_SCAN_INCLI_Y' undeclared here (not in a function) drivers/staging/iio/accel/adis16203_core.c:392: error: 'ADIS16203_SCAN_TEMP' undeclared here (not in a function) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-27Staging: Comedi: Build only on arches providing PAGE_KERNEL_NOCACHERalf Baechle
On architectures that don't define PAGE_KERNEL_NOCACHE, the Comedi driver turns into tragedy: CC [M] drivers/staging/comedi/drivers.o drivers/staging/comedi/drivers.c: In function ‘comedi_buf_alloc’: drivers/staging/comedi/drivers.c:505:41: error: ‘PAGE_KERNEL_NOCACHE’ undeclared (first use in this function) drivers/staging/comedi/drivers.c:505:41: note: each undeclared identifier is rep orted only once for each function it appears in make[3]: *** [drivers/staging/comedi/drivers.o] Error 1 Restrict the driver to only those architectures that define PAGE_KERNEL_NOCACHE. PAGE_KERNEL_NOCACHE is a kludge - some system architectures such as SGI IP27 are even uable to offer uncached operation - at least in the way an unwitting driver might assume. I haven't looked in details how the driver is using the area vmaped with PAGE_KERNEL_NOCACHE but maybe doing it XFS-style using cached memory and the flush_kernel_vmap_range / invalidate_kernel_vmap_range APIs in conjunction with the DMA API is a practical alternative. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: David Miller <davem@davemloft.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-27Staging: fix more iio builds when IIO_RING_BUFFER is not enabledRandy Dunlap
Fix lots more build errors in staging/iio when CONFIG_IIO_RING_BUFFER is not enabled by moving enums and defines outside of the CONFIG_IIO_RING_BUFFER ifdef block. Examples (one from each driver; there were 116 total errors): drivers/staging/iio/accel/adis16204_core.c:437: error: 'ADIS16204_SCAN_SUPPLY' undeclared here (not in a function) drivers/staging/iio/accel/adis16209_core.c:410: error: 'ADIS16209_SCAN_SUPPLY' undeclared here (not in a function) drivers/staging/iio/gyro/adis16260_core.c:420: error: 'ADIS16260_SCAN_GYRO' undeclared here (not in a function) drivers/staging/iio/imu/adis16400_core.c:565: error: 'ADIS16400_SCAN_SUPPLY' undeclared here (not in a function) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-27usb: r8a66597-hcd: fix cannot detect low/full speed deviceYoshihiro Shimoda
This controller can control "Transaction Translators", but the hcd->has_tt is not set. Since the commit d199c96d41d80a567493e12b8e96ea056a1350c1 ("USB: prevent buggy from crashing the USB stack") has checked it, the driver could not work the low/full speed device. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-27USB: ehci-ath79: fix a NULL pointer dereferenceGabor Juhos
Loading the ehci-hcd module on the ath79 platform causes a NULL pointer dereference: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == c0252928, ra == c00de968 Oops[#1]: Cpu 0 $ 0 : 00000000 00000070 00000001 00000000 $ 4 : 802cf870 0000117e ffffffff 8019c7bc $ 8 : 0000000a 00000002 00000001 fffffffb $12 : 8026ef20 0000000f ffffff80 802dad3c $16 : 8077a2d4 8077a200 c00f3484 8019ed84 $20 : c00f0000 00000003 000000a0 80262c2c $24 : 00000002 80079da0 $28 : 80788000 80789c80 80262b14 c00de968 Hi : 00000000 Lo : b61f0000 epc : c0252928 __mod_vermagic5+0xc260/0xc7e8 [ehci_hcd] Not tainted ra : c00de968 usb_add_hcd+0x2a4/0x858 [usbcore] Status: 1000c003 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ehci_hcd(+) pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filte r ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath mac80211 usbcore nls_base input_polldev crc_ccitt cfg80211 compat input_core a rc4 aes_generic crypto_algapi Process insmod (pid: 379, threadinfo=80788000, task=80ca2180, tls=77fe52d0) Stack : c0253184 80c57d80 80789cac 8077a200 00000001 8019edc0 807fa800 8077a200 8077a290 c00f3484 8019ed84 c00f0000 00000003 000000a0 80262c2c c00de968 802d0000 800878cc c0253228 c02528e4 c0253184 80c57d80 80bf6800 80ca2180 8007b75c 00000000 8077a200 802cf830 802d0000 00000003 fffffff4 00000015 00000348 00000124 800b189c c024bb4c c0255000 801a27e8 c0253228 c02528e4 ... Call Trace: [<c0252928>] __mod_vermagic5+0xc260/0xc7e8 [ehci_hcd] It is caused by: commit c430131a02d677aa708f56342c1565edfdacb3c0 Author: Jan Andersson <jan@gaisler.com> Date: Tue May 3 20:11:57 2011 +0200 USB: EHCI: Support controllers with big endian capability regs The two first HC capability registers (CAPLENGTH and HCIVERSION) are defined as one 8-bit and one 16-bit register. Most HC implementations have selected to treat these registers as part of a 32-bit register, giving the same layout for both big and small endian systems. This patch adds a new quirk, big_endian_capbase, to support controllers with big endian register interfaces that treat HCIVERSION and CAPLENGTH as individual registers. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> The reading of the HC capability register has been moved by that commit to a place where the ehci->caps field is not initialized yet. This patch moves the reading of the register back to the original place. Acked-by: Jan Andersson <jan@gaisler.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-27USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.cUwe Bonnes
appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-27usb/isp1760: Fix bug preventing the unlinking of control urbsArvid Brodin
Both control and bulk transfers use isp1760 slots of type ATL, but the driver unlink code for ATL slots only acts on urbs describing a bulk transfer, letting the code for INT slots take care of the unlink instead, which often ended up removing the interrupt transfer for root hub events instead. That's not good, and gets fixed by this patch. Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-27Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: USB: Fix up URB error codes to reflect implementation. xhci: Always set urb->status to zero for isoc endpoints. xhci: Add reset on resume quirk for asrock p67 host xHCI 1.0: Incompatible Device Error xHCI 1.0: Force Stopped Event(FSE) xhci: Don't warn about zeroed bMaxBurst descriptor field. USB: Free bandwidth when usb_disable_device is called. xhci: Reject double add of active endpoints.
2011-06-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-multitouch: add support for a new Lumio dual-touch panel HID: hid-multitouch: correct VID for Stantum panels HID: hid-multitouch: ensure slots are initialized
2011-06-26drm/i915: add Ivy Bridge page flip supportJesse Barnes
Use the blit ring for submitting flips since the render ring doesn't generate flip complete interrupts. Fixes bugs: https://bugs.freedesktop.org/show_bug.cgi?id=38362 https://bugs.freedesktop.org/show_bug.cgi?id=38392 https://bugs.freedesktop.org/show_bug.cgi?id=38393 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Tested-by: Jian J Zhao <jian.j.zhao@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-26drm/i915: split page flip queueing into per-chipset functionsJesse Barnes
This makes things a little clearer and prevents us from running old code on a new chipset that may not be supported. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewied-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-25mmc: queue: bring discard_granularity/alignment into line with SCSIAdrian Hunter
SCSI defines discard alignment as the offset to the first optimal discard. In the case of SD/MMC, that is always zero which is the default. SCSI defines discard granularity as a hint of a optimal discard size. That is much better expressed by the MMC "preferred erase size" (pref_erase) field. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: queue: append partition subname to queue thread nameAdrian Hunter
For example, an eMMC with 2 boot partitions will have 3 threads. The names change from: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0 42 ? 00:00:00 mmcqd/0 to: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0boot0 42 ? 00:00:00 mmcqd/0boot1 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: core: make erase timeout calculation allow for gated clockAdrian Hunter
The erase timeout calculation may depend on clock rate which is zero if the clock is gated, so use mmc_host_clk_rate() which allows for that case. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: block: switch card to User Data Area when removing the block driverAdrian Hunter
The MMC block driver and other drivers (e.g. mmc-test) will expect the card to be switched to the User Data Area eMMC partition when they start. Hence the MMC block driver should ensure it is that way when it is removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: sdio: reset card during power_restoreDaniel Drake
mmc_sdio_power_restore() skips some steps that are performed in other power-related codepaths which are necessary to fully reset the card. Without this, runtime PM fails for SD8686 SDIO wifi on OLPC XO-1.5. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESSJames Hogan
HAVE_EFFICIENT_UNALIGNED_ACCESS is a config option, therefore it needs the CONFIG_ before it when used by the preprocessor. Signed-off-by: James Hogan <james@albanarts.com> Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: sdhi: DMA slave ID 0 is invalidGuennadi Liakhovetski
Don't try to allocate DMA resources if the platform didn't specify positive DMA slave IDs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handlingGuennadi Liakhovetski
Commit b6147490e6aac82 ("mmc: tmio: split core functionality, DMA and MFD glue") broke handling of the TMIO_MMC_WRPROTECT_DISABLE flag by the tmio-mmc driver. This patch restores the original behaviour. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: omap_hsmmc: use original sg_len for dma_unmap_sgPer Forlin
Don't use the returned sg_len from dma_map_sg() as inparameter to dma_unmap_sg(). Use the original sg_len for both dma_map_sg and dma_unmap_sg according to the documentation in DMA-API.txt. Signed-off-by: Per Forlin <per.forlin@linaro.org> Reviewed-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: omap_hsmmc: fix ocr mask usageAnand Gadiyar
The OMAP HSMMC driver uses an ocr_mask to determine the list of voltages supported by the card. It populates this mask based on the list of voltages supported by the regulator that supplies the voltage. Commit 64be97822b (omap4 hsmmc: Update ocr mask for MMC2 for regulator to use) passed a fixed ocr_mask from the OMAP4 SDP board file to limit the voltage to 2.9-3.0 Volts, and updated the driver to use this mask if provided, instead of using the regulator's supported voltages. However the commit is buggy - the ocr_mask is overridden by the regulator's capabilities anyway. Fix this. (The bug shows up when a system-wide suspend is attempted on the OMAP4 SDP/Blaze platforms. The eMMC card comes up at 3V, but drops to 1.65V after the system resumes). Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Balaji T K <balajitk@ti.com> Acked-by: Venkatraman S <svenkatr@ti.com> Tested-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: sdio: fix runtime PM path during driver removalOhad Ben-Cohen
After commit e1866b3 "PM / Runtime: Rework runtime PM handling during driver removal" was introduced, the driver core stopped incrementing the runtime PM usage counter of the device during the invocation of the ->remove() callback. This indirectly broke SDIO's runtime PM path during driver removal, because no one calls _put_sync() anymore after ->remove() completes. This means that the power of runtime-PM-managed SDIO cards is kept high after their driver is removed (even if it was powered down beforehand). Fix that by directly calling _put_sync() when the last usage counter is downref'ed by the SDIO bus. Reported-and-tested-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25Merge branch 'timer-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rtc: vt8500: Fix build error & cleanup rtc_class_ops->update_irq_enable() alarmtimers: Return -ENOTSUPP if no RTC device is present alarmtimers: Handle late rtc module loading
2011-06-25atmel_serial: fix internal port numJean-Christophe PLAGNIOL-VILLARD
the atmel_ports is link to the console number and not the device id this was not detected on at91 as we always register the dbgu on the console as ttyS0 tested on at91sam9263 by setting the dbgu as ttyS1 and use as console diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 70e5646..9b8a14f 100644 - a/arch/arm/mach-at91/board-sam9263ek.c + b/arch/arm/mach-at91/board-sam9263ek.c @@ -58,14 +58,14 @@ static void __init ek_init_early(void) /* Initialize processor: 16.367 MHz crystal */ at91_initialize(16367660); - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); + /* DBGU on ttyS1. (Rx & Tx only) */ + at91_register_uart(0, 1, 0); - /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + /* USART0 on ttyS0. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9263_ID_US0, 0, ATMEL_UART_CTS | ATMEL_UART_RTS); - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); + /* set serial console to ttyS1 (ie, DBGU) */ + at91_set_serial_console(1); } /* Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-06-24Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: save/resume forcewake lock fixes Revert "drm/i915: Kill GTT mappings when moving from GTT domain" drm/i915: Apply HWSTAM workaround for BSD ring on SandyBridge drm/i915: Call intel_enable_plane from i9xx_crtc_mode_set (again)
2011-06-24cxgb3: skb_record_rx_queue now records the queue index relative to the ↵John (Jay) Hernandez
net_device. Fixed call to skb_record_rx_queue where we were passing the queue index relative to the adapter when it should have been relative to the net_device. Signed-off-by: John (Jay) Hernandez <jay@chelsio.com> Signed-off-by: Divy Le Ray <divy@chelsio.com> Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24Merge branch 'davem.r8169' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-06-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
2011-06-24r8169: fix wrong register use.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-06-24Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_marvell: Add support for 88SE91A0, 88SE91A4 libata/sas: only set FROZEN flag if new EH is supported libata: apply NOSETXFER horkage to the affected Pioneer drives regardless of firmware revision drivers/ata/sata_dwc_460ex: Fix typo 'corrresponding'
2011-06-24Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: handle special cases for vddc drm/radeon/kms: fix num_banks tiling config for fusion
2011-06-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6: tcm_fc: Fix conversion spec warning tcm_fc: Fix possible lock to unlock type deadlock tcm_fc: Fix ft_send_tm LUN lookup OOPs target: Fix incorrect strlen() NULL terminator checks target: Drop bogus ERR_PTR usage in target_fabric_configfs_init target: Fix ERR_PTR dereferencing bugs target: Convert transport_deregister_session_configfs nacl_sess_lock to save irq state target: Fix transport_get_lun_for_tmr failure cases [SCSI] target: Convert TASK_ATTR to scsi_tcq.h definitions [SCSI] target: Convert REPORT_LUNs to use int_to_scsilun [SCSI] target: Fix task->task_execute_queue=1 clear bug + LUN_RESET OOPs [SCSI] target: Fix bug with task_sg chained transport_free_dev_tasks release [SCSI] target: Fix interrupt context bug with stats_lock and core_tmr_alloc_req [SCSI] target: Fix multi task->task_sg[] chaining logic bug
2011-06-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI/ACPI: fix type mismatch PCI: fix new kernel-doc warning PCI: Fix warning in drivers/pci/probe.c on sparc64
2011-06-24HID: hid-multitouch: add support for a new Lumio dual-touch panelBenjamin Tissoires
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24HID: hid-multitouch: correct VID for Stantum panelsBenjamin Tissoires
while merging hid-stantum into hid-multitouch, I did not correctly copy/paste the VIDs for those devices. This patch fixes it. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24HID: hid-multitouch: ensure slots are initializedBenjamin Tissoires
In case a device does not provide the feature "Maximum Contact Count", or set it at 0, the maxcontacts field may be at 0 while calling input_mt_init_slots. This patch ensures that hid-multitouch will allways report ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space. This corrects a bug found with some Ilitek devices that has been integrated in 3.0-rc0. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24fbdev: amba: Link fb device to its parentLoïc Minier
Some pieces of userspace like debian-installer expect to find the fb0 driver name by readlink-ing /sys/class/graphics/fb0/device/driver but this was broken with amba-clcd as it sets up fb_info manually and missed the .device parent pointer. Signed-off-by: Loïc Minier <loic.minier@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24fsl-diu-fb: remove check for pixel clock rangesTimur Tabi
The Freescale DIU framebuffer driver defines two constants, MIN_PIX_CLK and MAX_PIX_CLK, that are supposed to represent the lower and upper limits of the pixel clock. These values, however, are true only for one platform clock rate (533MHz) and only for the MPC8610. So the actual range for the pixel clock is chip-specific, which means the current values are almost always wrong. The chance of an out-of-range pixel clock being used are also remote. Rather than try to detect an out-of-range clock in the DIU driver, we depend on the board-specific pixel clock function (e.g. p1022ds_set_pixel_clock) to clamp the pixel clock to a supported value. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24udlfb: Correct sub-optimal resolution selection.William Katsak
The situation in which the problem occurred was with a Plugable UGA-2K-A connected to a Samsung EX2220X display. The driver indicates that 1920x1080 is a valid mode (the first mode available, in fact), but proceeds to set the framebuffer size to 1600x1200. The patch corrects what seems to be a logic error, regarding unsetting the FB_MISC_1ST_DETAIL flag, if the first (top/best) mode is invalid. The existing code unset the flag if ANY mode was invalid. Signed-off-by: William Katsak <william.katsak@alcatel-lucent.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24Merge branch 'common/fbdev-meram' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x into fbdev-fixes-for-linus
2011-06-24hecubafb: add module_put on error path in hecubafb_probe()Pavel Shved
In hecubafb_probe(), after a successful try_module_get, vzalloc may fail and make the hecubafb_probe return, but the module is not put on this error path. This patch adds an exit point that calls module_put in such situation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved <shved@ispras.ru> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24sm501fb: fix section mismatch warningRandy Dunlap
Fix section mismatch warning in sm501fb: WARNING: drivers/video/sm501fb.o(.text+0x21d6): Section mismatch in reference from the function sm501fb_init_fb() to the variable .devinit.data:sm501_default_mode The function sm501fb_init_fb() references the variable __devinitdata sm501_default_mode. This is often because sm501fb_init_fb lacks a __devinitdata annotation or the annotation of sm501_default_mode is wrong. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24gx1fb: Fix section mismatch warningsRandy Dunlap
Fix a chain of section mismatches in geode driver, beginning with: WARNING: drivers/video/geode/gx1fb.o(.data+0x70): Section mismatch in reference from the variable gx1fb_driver to the function .init.text:gx1fb_probe() The variable gx1fb_driver references the function __init gx1fb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Making the changes that Paul pointed out resulted in a few more changes being needed, so they are all included here. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24fbdev: sh_mobile_meram: Correct pointer check for YCbCr chroma planeDamian Hobson-Garcia
The check was intended to test if we have a valid pointer to write into, but it mistakenly checks the pointer contents instead. Since a valid pointer is mandatory for the chroma data if a YCbCr format is used, the pointer check has been removed. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24pata_marvell: Add support for 88SE91A0, 88SE91A4Paweł Drewniak
This patch enables support for Marvell IDE PATA controllers found on Asus P8P67LE motherboard. The formatting has been corrected and I also received a report from two users of this motherboard that the patch works. Signed-off-by: Paweł Drewniak <czajernia@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-06-24drm/radeon/kms: handle special cases for vddcAlex Deucher
A voltage value of 0xff01 requires that the driver look up the max voltage for the board based using the atom SetVoltage command table. Setting the proper voltage should fix stability on some newer asics. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-24drm/radeon/kms: fix num_banks tiling config for fusionAlex Deucher
The field is encoded: 0 = 4 banks 1 = 8 banks 2 = 16 banks Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-24tcm_fc: Fix conversion spec warningNicholas Bellinger
This patch fixes the following conversion specification warning for size_t drivers/target/tcm_fc/tfc_io.c: In function ‘ft_queue_data_in’: drivers/target/tcm_fc/tfc_io.c:209: warning: format ‘%x’ expects type ‘unsigned int’, but argument 5 has type ‘size_t’ Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-06-24tcm_fc: Fix possible lock to unlock type deadlockDan Carpenter
There is a typo here, it should be an unlock instead of a lock. The original code will deadlock. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>