summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2009-12-31Merge branch 'for-jens' of git://git.drbd.org/linux-2.6-drbd into for-linusJens Axboe
2009-12-31drbd: Silenced an assert that could triggered after changing write ordering ↵Philipp Reisner
method Immediately after changing the write ordering method, the epoch can already be finished at this point. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-12-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: introduce kernel parameter acpi_sleep=sci_force_enable ACPI: WMI: Survive BIOS with duplicate GUIDs dell-wmi - fix condition to abort driver loading wmi: check find_guid() return value to prevent oops dell-wmi, hp-wmi, msi-wmi: check wmi_get_event_data() return value ACPI: hp-wmi, msi-wmi: clarify that wmi_install_notify_handler() returns an acpi_status dell-wmi: sys_init_module: 'dell_wmi'->init suspiciously returned 21, it should ACPI video: correct error-handling code ACPI video: no warning message if "acpi_backlight=vendor" is used ACPI: fix ACPI=n allmodconfig build thinkpad-acpi: improve Kconfig help text thinkpad-acpi: update volume subdriver documentation thinkpad-acpi: make volume subdriver optional thinkpad-acpi: don't fail to load the entire module due to ALSA problems thinkpad-acpi: don't take the first ALSA slot by default
2009-12-30Merge branch 'resume-sci-force-bootparam' into releaseLen Brown
2009-12-30ACPI: introduce kernel parameter acpi_sleep=sci_force_enableZhang Rui
Introduce kernel parameter acpi_sleep=sci_force_enable some laptop requires SCI_EN being set directly on resume, or else they hung somewhere in the resume code path. We already have a blacklist for these laptops but we still need this option, especially when debugging some suspend/resume problems, in case there are systems that need this workaround and are not yet in the blacklist. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: drivers/dma: Correct use after free drivers/dma: drop unnecesary memset ioat2,3: put channel hardware in known state at init async_tx: expand async raid6 test to cover ioatdma corner case ioat3: fix p-disabled q-continuation sh: fix DMA driver's descriptor chaining and cookie assignment dma: at_hdmac: correct incompatible type for argument 1 of 'spin_lock_bh'
2009-12-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/cardbus: Add a fixup hook and fix powerpc PCI: change PCI nomenclature in drivers/pci/ (non-comment changes) PCI: change PCI nomenclature in drivers/pci/ (comment changes) PCI: fix section mismatch on update_res() PCI: add Intel 82599 Virtual Function specific reset method PCI: add Intel USB specific reset method PCI: support device-specific reset methods PCI: Handle case when no pci device can provide cache line size hint PCI/PM: Propagate wake-up enable for PCIe devices too vgaarbiter: fix a typo in the vgaarbiter Documentation
2009-12-30Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: blk_rq_err_sectors cleanup block: Honor the gfp_mask for alloc_page() in blkdev_issue_discard() block: Fix incorrect alignment offset reporting and update documentation cfq-iosched: don't regard requests with long distance as close aoe: switch to the new bio_flush_dcache_pages() interface drivers/block/mg_disk.c: use resource_size() drivers/block/DAC960.c: use DAC960_V2_Controller block: Fix topology stacking for data and discard alignment drbd: remove unused #include <linux/version.h> drbd: remove duplicated #include drbd: Fix test of unsigned in _drbd_fault_random() drbd: Constify struct file_operations cfq-iosched: Remove prio_change logic for workload selection cfq-iosched: Get rid of nr_groups cfq-iosched: Remove the check for same cfq group from allow_merge drbd: fix test of unsigned in _drbd_fault_random() block: remove Documentation/block/as-iosched.txt
2009-12-30dell-wmi: sys_init_module: 'dell_wmi'->init suspiciously returned 21, it ↵Len Brown
should follow 0/-E convention wmi_install_notify_handler() returns an acpi_error, but dell_wmi_init() needs return a -errno style error. Signed-off-by: Len Brown <len.brown@intel.com> Tested-by: Paul Rolland <rol@as2917.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-30wmi: check find_guid() return value to prevent oopsPaul Rolland
Signed-off-by: rol@as2917.net <Paul Rolland> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-30Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: allow a resync that is waiting for other resync to complete, to be aborted. md: remove unnecessary code from do_md_run md: make recovery started by do_md_run() visible via sync_action md: fix small irregularity with start_ro module parameter md: Fix unfortunate interaction with evms
2009-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (74 commits) Revert "b43: Enforce DMA descriptor memory constraints" iwmc3200wifi: fix array out-of-boundary access wl1251: timeout one too soon in wl1251_boot_run_firmware() mac80211: fix propagation of failed hardware reconfigurations mac80211: fix race with suspend and dynamic_ps_disable_work ath9k: fix missed error codes in the tx status check ath9k: wake hardware during AMPDU TX actions ath9k: wake hardware for interface IBSS/AP/Mesh removal ath9k: fix suspend by waking device prior to stop cfg80211: fix error path in cfg80211_wext_siwscan wl1271_cmd.c: cleanup char => u8 iwlwifi: Storage class should be before const qualifier ath9k: Storage class should be before const qualifier cfg80211: fix race between deauth and assoc response wireless: remove remaining qual code rt2x00: Add USB ID for Linksys WUSB 600N rev 2. ath5k: fix SWI calibration interrupt storm mac80211: fix ibss join with fixed-bssid libertas: Remove carrier signaling from the scan code orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabled ...
2009-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: core - Fix double unlock in rng_dev_read
2009-12-30Merge branch 'video-error-case' into releaseLen Brown
2009-12-30Merge branch 'bugzilla-13671' into releaseLen Brown
2009-12-30Merge branch 'thinkpad' into releaseLen Brown
2009-12-30Merge branch 'wmi' into releaseLen Brown
2009-12-30ACPI: WMI: Survive BIOS with duplicate GUIDsCarlos Corbacho
It would appear that in BIOS's with nVidia hooks, the GUID 05901221-D566-11D1-B2F0-00A0C9062910 is duplicated. For now, the simplest solution is to just ignore any duplicate GUIDs. These particular hooks are not currently supported/ used in the kernel, so whoever does that can figure out what the 'right' solution should be (if there's a better one). http://bugzilla.kernel.org/show_bug.cgi?id=14846 Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Oldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30dell-wmi - fix condition to abort driver loadingDmitry Torokhov
From: Dmitry Torokhov <dmitry.torokhov@gmail.com> The commit 1fdd407f4e3f2ecb453954cbebb6c22491c61853 incorrectly made driver abort loading when known GUID is present when it should have done exactly the opposite. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30wmi: check find_guid() return value to prevent oopsPaul Rolland
Signed-off-by: Paul Rolland <rol@as2917.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30dell-wmi, hp-wmi, msi-wmi: check wmi_get_event_data() return valueLen Brown
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. The callers of wmi_get_event_data() pass ACPI_ALLOCATE_BUFFER, and thus must check its return value before accessing or kfree() on the buffer. Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30ACPI: hp-wmi, msi-wmi: clarify that wmi_install_notify_handler() returns an ↵Len Brown
acpi_status Emphasize that that wmi_install_notify_handler() returns an acpi_status rather than -errno by by testing ACPI_SUCCESS(), ACPI_FAILURE(). No functional change in this patch, but this confusion caused a bug in dell-wmi. Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30dell-wmi: sys_init_module: 'dell_wmi'->init suspiciously returned 21, it shouldLen Brown
follow 0/-E convention wmi_install_notify_handler() returns an acpi_error, but dell_wmi_init() needs return a -errno style error. Tested-by: Paul Rolland <rol@as2917.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30ACPI video: correct error-handling codeZhang Rui
backlight_device_register may return an ERR_PTR value rather than a valid pointer. Problem found by Julia Lawall, properly fixed by Zhang Rui. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Julia Lawall <julia@diku.dk> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30ACPI video: no warning message if "acpi_backlight=vendor" is usedZhang Rui
AML code always sends notifications to ACPI video device, even if we disable the ACPI backlight control by using boot option "acpi_backlight=vendor". In this case we should not print any warning message. http://bugzilla.kernel.org/show_bug.cgi?id=13671#c14 Sigend-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30ACPI: fix ACPI=n allmodconfig buildIngo Molnar
Today's -tip failed to build because commit 9e368fa011d4e0aa050db348d69514900520e40b ("ipmi: add PNP discovery (ACPI namespace via PNPACPI)") from today's upstream kernel causes the following build failure on x86, for CONFIG_ACPI=n && CONFIG_IPMI_SI=y: drivers/char/ipmi/ipmi_si_intf.c:3208: error: 'ipmi_pnp_driver' undeclared (first use in this function) drivers/char/ipmi/ipmi_si_intf.c:3208: error: (Each undeclared identifier is reported only once drivers/char/ipmi/ipmi_si_intf.c:3208: error: for each function it appears in.) drivers/char/ipmi/ipmi_si_intf.c:3334: error: 'ipmi_pnp_driver' undeclared (first use in this function) The reason is that the ipmi_pnp_driver depends on ACPI facilities and is only made available under ACPI - while the registration and unregistration is made dependent on CONFIG_PNP: #ifdef CONFIG_PNP pnp_register_driver(&ipmi_pnp_driver); #endif The solution is to only register this driver under ACPI. (Also, the CONFIG_PNP dependency is not needed because pnp_register_driver() is stubbed out in the !CONFIG_PNP case.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30md: allow a resync that is waiting for other resync to complete, to be aborted.NeilBrown
If two arrays share a device, then they will not both resync at the same time. One will wait for the other to complete. While waiting, the MD_RECOVERY_INTR flag is not checked so a device failure, which would make the resync pointless, does not cause the resync to abort, so the failed device cannot be removed (as it cannot be remove while a resync is happening). So add a test for MD_RECOVERY_INTR. Reported-by: Brett Russ <bruss@netezza.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-30md: remove unnecessary code from do_md_runNeilBrown
Since commit dfc7064500061677720fa26352963c772d3ebe6b, ->hot_remove_disks has not removed non-failed devices from an array until recovery is no longer possible. So the code in do_md_run to get around the fact that md_check_recovery (which calls ->hot_remove_disks) would remove partially-in-sync devices is no longer needed. So remove it. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-30md: make recovery started by do_md_run() visible via sync_actionDan Williams
By default md_do_sync() will perform recovery if no other actions are specified. However, action_show() relies on MD_RECOVERY_RECOVER to be set otherwise it returns 'idle'. So, add a missing set MD_RECOVERY_RECOVER when starting recovery. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-30md: fix small irregularity with start_ro module parameterNeilBrown
The start_ro modules parameter can be used to force arrays to be started in 'auto-readonly' in which they are read-only until the first write. This ensures that no resync/recovery happens until something else writes to the device. This is important for resume-from-disk off an md array. However if an array is started 'readonly' (by writing 'readonly' to the 'array_state' sysfs attribute) we want it to be really 'readonly', not 'auto-readonly'. So strengthen the condition to only set auto-readonly if the array is not already read-only. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-12-30md: Fix unfortunate interaction with evmsNeilBrown
evms configures md arrays by: open device send ioctl close device for each different ioctl needed. Since 2.6.29, the device can disappear after the 'close' unless a significant configuration has happened to the device. The change made by "SET_ARRAY_INFO" can too minor to stop the device from disappearing, but important enough that losing the change is bad. So: make sure SET_ARRAY_INFO sets mddev->ctime, and keep the device active as long as ctime is non-zero (it gets zeroed with lots of other things when the array is stopped). This is suitable for -stable kernels since 2.6.29. Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2009-12-29Revert "b43: Enforce DMA descriptor memory constraints"John W. Linville
This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23. That commit is shown to cause allocation failures during initialization on some machines. http://bugzilla.kernel.org/show_bug.cgi?id=14844 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-29drbd: Kconfig fixJohannes Thoma
!CONFIG_OPT evalues to FALSE if CONFIG_OPT='m'. Do not display the "DRBD disabled..." message if the dependencies are compiled as module. Signed-off-by: Johannes Thoma <johannes.thoma@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2009-12-29drbd: Fix for a race between IO and a detach operation [Bugz 262]Philipp Reisner
In D_DISKLESS we do not hand out any new references to ldev (local_cnt) therefore waiting until all previously handed out refereces got returned is sufficient before actually freeing mdev->ldev. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-12-29drbd: Use drbd_crypto_is_hash() instead of an open coded checkPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-12-28iwmc3200wifi: fix array out-of-boundary accessZhu Yi
Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH(). Cc: stable@kernel.org Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1251: timeout one too soon in wl1251_boot_run_firmware()Roel Kluin
`loop' reaches INIT_LOOP + 1 after the loop. so if ACX_INTR_INIT_COMPLETE occurs in the last iteration the write occurs but also the error out as if a timeout occurred. This is probably very unlikely to ever occur. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28ath9k: fix missed error codes in the tx status checkFelix Fietkau
My previous change added in: commit 815833e7ecf0b9a017315cae6aef4d7cd9517681 ath9k: fix tx status reporting was not checking all possible tx error conditions. This could possibly lead to throughput issues due to slow rate control adaption or missed retransmissions of failed A-MPDU frames. This patch adds a mask for all possible error conditions and uses it in the xmit ok check. Cc: stable@kernel.org Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28ath9k: wake hardware during AMPDU TX actionsLuis R. Rodriguez
AMDPDU actions poke hardware for TX operation, as such we want to turn hardware on for these actions. AMDPU RX operations do not require hardware on as nothing is done in hardware for those actions. Without this we cannot guarantee hardware has been programmed correctly for each AMPDU TX action. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28ath9k: wake hardware for interface IBSS/AP/Mesh removalLuis R. Rodriguez
When we remove a IBSS/AP/Mesh interface we stop DMA but to do this we should ensure hardware is on. Awaken the device prior to these calls. This should ensure DMA is stopped upon suspend and plain device removal. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28ath9k: fix suspend by waking device prior to stopSujith
Ensure the device is awake prior to trying to tell hardware to stop it. Impact of not doing this is we can likely leave the device in an undefined state likely causing issues with suspend and resume. This patch ensures harware is where it should be prior to suspend. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271_cmd.c: cleanup char => u8Dan Carpenter
This is just a clean up and doesn't make a functional difference. It keeps the lint checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28iwlwifi: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28ath9k: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wireless: remove remaining qual codeJohannes Berg
This removes the remaining users of the rx status 'qual' field and the field itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Add USB ID for Linksys WUSB 600N rev 2.Gertjan van Wingerde
This is a rt2870 based device. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28ath5k: fix SWI calibration interrupt stormBob Copeland
The calibration period is now invoked by triggering a software interrupt from within the ISR by ath5k_hw_calibration_poll() instead of via a timer. However, the calibration interval isn't initialized before interrupts are enabled, so we can have a situation where an interrupt occurs before the interval is assigned, so the interval is actually negative. As a result, the ISR will arm a software interrupt to schedule the tasklet, and then rearm it when the SWI is processed, and so on, leading to a softlockup at modprobe time. Move the initialization order around so the calibration interval is set before interrupts are active. Another possible fix is to schedule the tasklet directly from the poll routine, but I think there are additional plans for the SWI. Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28libertas: Remove carrier signaling from the scan codeSamuel Ortiz
There is no reason to signal a carrier off when doing a 802.11 scan. Cc: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabledAndrey Borzenkov
orinoco_set_key is called from two places both with interrupts disabled (under orinoco_lock). Use GFP_ATOMIC instead of GFP_KERNEL. Fixes following warning: [ 77.254109] WARNING: at /home/bor/src/linux-git/kernel/lockdep.c:2465 lockdep_trace_alloc+0x9a/0xa0() [ 77.254109] Hardware name: PORTEGE 4000 [ 77.254109] Modules linked in: af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod loop nvram toshiba cryptomgr aead pcompress crypto_blkcipher michael_mic crypto_hash crypto_algapi orinoco_cs orinoco cfg80211 smsc_ircc2 pcmcia irda toshiba_acpi yenta_socket video i2c_ali1535 backlight rsrc_nonstatic ali_agp pcmcia_core psmouse output crc_ccitt i2c_core alim1535_wdt rfkill sg evdev ohci_hcd agpgart usbcore pata_ali libata reiserfs [last unloaded: scsi_wait_scan] [ 77.254109] Pid: 2296, comm: wpa_supplicant Not tainted 2.6.32-1avb #1 [ 77.254109] Call Trace: [ 77.254109] [<c011f0ad>] warn_slowpath_common+0x6d/0xa0 [ 77.254109] [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [<c011f0f5>] warn_slowpath_null+0x15/0x20 [ 77.254109] [<c014206a>] lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [<c018d296>] __kmalloc+0x36/0x130 [ 77.254109] [<dffcb6a8>] ? orinoco_set_key+0x48/0x1c0 [orinoco] [ 77.254109] [<dffcb6a8>] orinoco_set_key+0x48/0x1c0 [orinoco] [ 77.254109] [<dffcb9fc>] orinoco_ioctl_set_encodeext+0x1dc/0x2d0 [orinoco] [ 77.254109] [<c035b117>] ioctl_standard_call+0x207/0x3b0 [ 77.254109] [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco] [ 77.254109] [<c0307f1f>] ? rtnl_lock+0xf/0x20 [ 77.254109] [<c0307f1f>] ? rtnl_lock+0xf/0x20 [ 77.254109] [<c02fb115>] ? __dev_get_by_name+0x85/0xb0 [ 77.254109] [<c035b616>] wext_handle_ioctl+0x176/0x200 [ 77.254109] [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco] [ 77.254109] [<c030020f>] dev_ioctl+0x6af/0x730 [ 77.254109] [<c02eec65>] ? move_addr_to_kernel+0x55/0x60 [ 77.254109] [<c02eed59>] ? sys_sendto+0xe9/0x130 [ 77.254109] [<c02ed77e>] sock_ioctl+0x7e/0x250 [ 77.254109] [<c02ed700>] ? sock_ioctl+0x0/0x250 [ 77.254109] [<c019cf4c>] vfs_ioctl+0x1c/0x70 [ 77.254109] [<c019d1fa>] do_vfs_ioctl+0x6a/0x590 [ 77.254109] [<c0178e50>] ? might_fault+0x90/0xa0 [ 77.254109] [<c0178e0a>] ? might_fault+0x4a/0xa0 [ 77.254109] [<c02ef90e>] ? sys_socketcall+0x17e/0x280 [ 77.254109] [<c019d759>] sys_ioctl+0x39/0x60 [ 77.254109] [<c0102e3b>] sysenter_do_call+0x12/0x32 [ 77.254109] ---[ end trace 95ef563548d21efd ]--- Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>