summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-14pohmelfs: Use new syncing helperJan Kara
Use new generic_write_sync() helper instead of sync_page_range(). Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14vfs: Rename generic_file_aio_write_nolockChristoph Hellwig
generic_file_aio_write_nolock() is now used only by block devices and raw character device. Filesystems should use __generic_file_aio_write() in case generic_file_aio_write() doesn't suit them. So rename the function to blkdev_aio_write() and move it to fs/blockdev.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14pohmelfs: Use __generic_file_aio_write instead of generic_file_aio_write_nolockJan Kara
Use new helper __generic_file_aio_write(). Since the fs takes care of syncing by itself afterwards, there are no more changes needed. CC: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-11Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (25 commits) pata_rz1000: use printk_once ahci: kill @force_restart and refine CLO for ahci_kick_engine() pata_cs5535: add pci id for AMD based CS5535 controllers ahci: Add AMD SB900 SATA/IDE controller device IDs drivers/ata: use resource_size sata_fsl: Defer non-ncq commands when ncq commands active libata: add SATA PMP revision information for spec 1.2 libata: fix off-by-one error in ata_tf_read_block() ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic dmi: extend dmi_get_year() to dmi_get_date() dmi: fix date handling in dmi_get_year() libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru() sata_sis: convert to slave_link sata_sil24: always set protocol override for non-ATAPI data commands libata: Export AHCI capabilities libata: Delegate nonrot flag setting to SCSI [libata] Add pata_rdc driver for RDC ATA devices drivers/ata: Remove unnecessary semicolons libata: remove spindown skipping and warning ...
2009-09-11Merge branch 'oprofile-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (55 commits) arch/x86/oprofile/op_model_amd.c: fix op_amd_handle_ibs() return type Revert "x86: oprofile/op_model_amd.c set return values for op_amd_handle_ibs()" x86/oprofile: Small coding style fixes x86/oprofile: Add counter reservation check for virtual counters x86/oprofile: Implement op_x86_virt_to_phys() oprofile: Adding switch counter to oprofile statistic variables x86/oprofile: Implement mux_clone() x86/oprofile: Enable multiplexing only if the model supports it x86/oprofile: Add function has_mux() to check multiplexing support x86/oprofile: Modify initialization of num_virt_counters x86/oprofile: Remove unused num_virt_controls from struct op_x86_model_spec x86/oprofile: Remove const qualifier from struct op_x86_model_spec x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in nmi_int.c x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c x86/oprofile: Implement multiplexing setup/shutdown functions oprofile: Grouping multiplexing code in op_model_amd.c oprofile: Introduce op_x86_phys_to_virt() oprofile: Grouping multiplexing code in oprof.c oprofile: Remove oprofile_multiplexing_init() ...
2009-09-11Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: pci/intr_remapping: Allocate irq_iommu on node irq: Add irq_node() primitive irq: Make sure irq_desc for legacy irq get correct node setting genirq: Add prototype for handle_nested_irq() irq: Remove superfluous NULL pointer check in check_irq_resend() irq: Clean up by removing irqfixup MODULE_PARM_DESC() genirq: Fix comment describing suspend_device_irqs() genirq: Remove obsolete defines and typedefs
2009-09-11Merge branch 'core-debug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: debug lockups: Improve lockup detection, fix generic arch fallback debug lockups: Improve lockup detection
2009-09-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (102 commits) crypto: sha-s390 - Fix warnings in import function crypto: vmac - New hash algorithm for intel_txt support crypto: api - Do not displace newly registered algorithms crypto: ansi_cprng - Fix module initialization crypto: xcbc - Fix alignment calculation of xcbc_tfm_ctx crypto: fips - Depend on ansi_cprng crypto: blkcipher - Do not use eseqiv on stream ciphers crypto: ctr - Use chainiv on raw counter mode Revert crypto: fips - Select CPRNG crypto: rng - Fix typo crypto: talitos - add support for 36 bit addressing crypto: talitos - align locks on cache lines crypto: talitos - simplify hmac data size calculation crypto: mv_cesa - Add support for Orion5X crypto engine crypto: cryptd - Add support to access underlaying shash crypto: gcm - Use GHASH digest algorithm crypto: ghash - Add GHASH digest algorithm for GCM crypto: authenc - Convert to ahash crypto: api - Fix aligned ctx helper crypto: hmac - Prehash ipad/opad ...
2009-09-11Merge branch 'writeback' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'writeback' of git://git.kernel.dk/linux-2.6-block: writeback: check for registered bdi in flusher add and inode dirty writeback: add name to backing_dev_info writeback: add some debug inode list counters to bdi stats writeback: get rid of pdflush completely writeback: switch to per-bdi threads for flushing data writeback: move dirty inodes from super_block to backing_dev_info writeback: get rid of generic_sync_sb_inodes() export
2009-09-11Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (54 commits) [S390] tape: Use pr_xxx instead of dev_xxx in shared driver code [S390] Wire up page fault events for software perf counters. [S390] Remove smp_cpu_not_running. [S390] Get rid of cpuid.h header file. [S390] Limit cpu detection to 256 physical cpus. [S390] tape: Fix device online messages [S390] Enable guest page hinting by default. [S390] use generic scatterlist.h [S390] s390dbf: Add description for usage of "%s" in sprintf events [S390] Initialize __LC_THREAD_INFO early. [S390] fix recursive locking on page_table_lock [S390] kvm: use console_initcall() to initialize s390 virtio console [S390] tape: reversed order of labels [S390] hypfs: Use "%u" instead of "%d" for unsigned ints in snprintf [S390] kernel: Print an error message if kernel NSS cannot be defined [S390] zcrypt: Free ap_device if dev_set_name fails. [S390] zcrypt: Use spin_lock_bh in suspend callback [S390] xpram: Remove checksum validation for suspend/resume [S390] vmur: Invalid allocation sequence for vmur class [S390] hypfs: remove useless variable qname ...
2009-09-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (48 commits) RDMA/iwcm: Reject the connection when the cm_id is destroyed RDMA/cxgb3: Clean up properly on FW mismatch failures RDMA/cxgb3: Don't ignore insert_handle() failures MAINTAINERS: InfiniBand/RDMA mailing list transition to vger IB/mad: Allow tuning of QP0 and QP1 sizes IB/mad: Fix possible lock-lock-timer deadlock RDMA/nes: Map MTU to IB_MTU_* and correctly report link state RDMA/nes: Rework the disconn routine for terminate and flushing RDMA/nes: Use the flush code to fill in cqe error RDMA/nes: Make poll_cq return correct number of wqes during flush RDMA/nes: Use flush mechanism to set status for wqe in error RDMA/nes: Implement Terminate Packet RDMA/nes: Add CQ error handling RDMA/nes: Clean out CQ completions when QP is destroyed RDMA/nes: Change memory allocation for cqp request to GFP_ATOMIC RDMA/nes: Allocate work item for disconnect event handling RDMA/nes: Update refcnt during disconnect IB/mthca: Don't allow userspace open while recovering from catastrophic error IB/mthca: Distinguish multiple devices in /proc/interrupts IB/mthca: Annotate CQ locking ...
2009-09-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (57 commits) binfmt_elf: fix PT_INTERP bss handling TPM: Fixup boot probe timeout for tpm_tis driver sysfs: Add labeling support for sysfs LSM/SELinux: inode_{get,set,notify}secctx hooks to access LSM security context information. VFS: Factor out part of vfs_setxattr so it can be called from the SELinux hook for inode_setsecctx. KEYS: Add missing linux/tracehook.h #inclusions KEYS: Fix default security_session_to_parent() Security/SELinux: includecheck fix kernel/sysctl.c KEYS: security_cred_alloc_blank() should return int under all circumstances IMA: open new file for read KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6] KEYS: Do some whitespace cleanups [try #6] KEYS: Make /proc/keys use keyid not numread as file position [try #6] KEYS: Add garbage collection for dead, revoked and expired keys. [try #6] KEYS: Flag dead keys to induce EKEYREVOKED [try #6] KEYS: Allow keyctl_revoke() on keys that have SETATTR but not WRITE perm [try #6] KEYS: Deal with dead-type keys appropriately [try #6] CRED: Add some configurable debugging [try #6] selinux: Support for the new TUN LSM hooks ...
2009-09-11[S390] tape: Use pr_xxx instead of dev_xxx in shared driver codeMichael Holzheu
For messages from the tape core that is shared between the 3590 and 34xx tape disciplines, we want to have the "tape" prefix instead of "tape_3590" or "tape_34xx". In order to fix this, we now use the pr_xxx printk macros. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] Get rid of cpuid.h header file.Heiko Carstens
Merge cpuid.h header file into cpu.h. While at it convert from typedef to struct declaration and also convert cio code to use proper lowcore structure instead of casts. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] tape: Fix device online messagesMichael Holzheu
Currently, when a tape device is set online and no cartridge is loaded, we get the messages "The tape cartridge has been successfully unloaded" and "Determining the size of the recorded area". These messages are not correct. To fix this, we now print the "cartridge loaded/unloaded" messages only, when the load/unload event really occurs. In addition to that, the message "Determining the size of the recorded area" is only printed, if a cartridge is loaded. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] kvm: use console_initcall() to initialize s390 virtio consoleHendrik Brueckner
Use a console_initcall() to initialize the s390 virtio console and clean up s390 console initialization in setup.c. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] tape: reversed order of labelsRoel Kluin
Fix the order of goto labels in tape_generic_online. Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
2009-09-11[S390] zcrypt: Free ap_device if dev_set_name fails.Felix Beck
If dev_set_name fails during scanning the AP bus, the reserved memory has to be freed. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] zcrypt: Use spin_lock_bh in suspend callbackFelix Beck
Fix lock dependency warning. inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. bash/1442 [HC0[0]:SC0[0]:HE1:SE1] takes: (&ap_dev->lock){+.?...}, at: [<000003e001280404>] __ap_poll_device+0x40/0x3e8 [ap] {IN-SOFTIRQ-W} state was registered at: [<000000000017f094>] __lock_acquire+0xb78/0x182c [<000000000017fe8e>] lock_acquire+0x146/0x178 [<0000000000549cf2>] _spin_lock+0x5a/0x98 [<000003e001280404>] __ap_poll_device+0x40/0x3e8 [ap] [<000003e001280afe>] ap_poll_all+0xaa/0x1a4 [ap] [<000000000014fa82>] tasklet_action+0xfe/0x1f4 [<0000000000150a56>] __do_softirq+0x116/0x284 [<0000000000111058>] do_softirq+0xe4/0xe8 [<00000000001504ba>] irq_exit+0xba/0xd8 [<00000000003dd04a>] do_IRQ+0x176/0x1fc [<000000000011823c>] io_return+0x0/0x8 [<0000004bfbfd2c0e>] 0x4bfbfd2c0e Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] xpram: Remove checksum validation for suspend/resumeMichael Holzheu
Currently in the suspend process checksums for the XPRAM partitions are created and stored. During the resume process it is checked, if the checksums are still the same. If this is not the case, a kernel panic is triggered. Unfortunately this prevents XPRAM from beeing used as suspend device, because in this case after the checksum has been created, the memory image is written to XPRAM and therefore the contents of the suspend partition is changed. In order to allow XPRAM to be used as suspend device, this patch removes the checksum validation. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] vmur: Invalid allocation sequence for vmur classMichael Holzheu
The vmur class is allocated after the CCW driver is registered and it is destroyed before the CCW driver is unregistered. This is not the correct sequence, because the vmur class can be used via driver core callbacks that are triggered during the CCW driver deregistration. For Example: 1. vmur device is online 2. vmur module is unloaded This leads to the following function call stack: <4> [<0000000000387286>] device_destroy+0x36/0x5c <4> [<000003e000209714>] ur_set_offline_force+0x9c/0x10c [vmur] <4> [<000003e00020a928>] ur_remove+0x64/0xbc [vmur] <4> [<00000000003e4d2e>] ccw_device_remove+0x42/0x1ac <4> [<000000000038a1aa>] __device_release_driver+0x9a/0xe4 <4> [<000000000038a2da>] driver_detach+0xe6/0xec <4> [<0000000000388ee4>] bus_remove_driver+0xc0/0x108 <4> [<000003e00020ad5a>] ur_exit+0x52/0x84 [vmur] In device_destroy() the vmur class is used. Since it is already freed, this can lead to a kernel panic. To fix the problem, the vmur class has to be allocated before the CCW driver is registered and destroyed after the CCW driver has ben unregistered. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] add call home supportHans-Joachim Picht
Signed-off-by: Hans-Joachim Picht <hans@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] tape: use init_timer_on_stack() rather than init_timer()Frank Munzert
With CONFIG_DEBUG_OBJECTS_TIMERS=y "chccwdev --online" for a tape device will fail with message "ODEBUG: object is on stack, but not annotated". We now use init_timer_on_stack. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] proper use of device registerSebastian Ott
Don't use kfree directly after device registration started. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] dasd: fix message namingStefan Haberland
This patch fixes message naming so that generic dasd messages do not contain the device discipline. For this purpose the dev_ makros are replaced by pr_ makros for generic dasd messages. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] dasd: optimize cpu usage in goodcaseStefan Haberland
remove unnecessary dbf call, remove string operations for magic Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] dasd: fail requests when device state is less then readyStefan Weinhuber
A DASD device that is not ready or online has no defined disk layout, so all requests that arrive in such a state need to be returned as failed. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: remove ccw_device init_nameSebastian Ott
We used the init_name to set the console ccw_device's name early at the boot stage. This patch moves the name setting (for all ccw devices) to the point where we actually register the device. At this time we can do dynamic allocations and therefore use dev_set_name. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: move final put_device to ccw_device_unregisterSebastian Ott
We use a test_and_clear_bit to prevent a device from being unregistered twice. Unfortunately in this cases the "final" put_device (from device_initialize) was issued more than once, resulting in an use after free error. Fix this by moving this put_device to ccw_device_unregister. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: remove subchannel init_nameSebastian Ott
We used the init_name to set the console subchannels name early at the boot stage. With the patch cio: fix memleak in subchannel validation we moved the name setting to the point where we actually register the console subchannel. At this time we can do dynamic allocations and therefore use dev_set_name. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: fix memleak in subchannel validationSebastian Ott
When scanning for new subchannels we have a code path where we allocate memory for a struct subchannel, set the device name (which is dynamically allocated now) and do a check if the underlying device is blacklisted - if so we free the subchannel structure. Since we have not set up refcounting at this stage, the device name's memory is lost. Fix this by moving the dev_set_name after the blacklist test. Note: With this patch the init_name for the console subchannel becomes virtually obsolete. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: fix use after free in s390 debug featureSebastian Ott
When using s390dbf with "%s" in sprintf format strings the string itself is not copied to the dbf buffer. Since in this case only pointers are stored in the s390dbf, we should not use dev_name - which is bound to the lifetime of the device. Reading this entry from s390dbf after the device was released will cause an use after free error. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] qdio: remove limited number of debugfs entriesJan Glauber
The number of qdio debugfs entries was limited. Remove this limit and group the queue files in a per device directory. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: failing set online/offline processing.Michael Ernst
When unit checks trigger sensing the device state is set to W4SENSE until sense completion; then the device state is set back to ONLINE. If a unit check occurs while set online or set offline requests are processed then it might happen that the device's temporary W4SENSE state causes these functions to terminate, leaving the device in an inconsistent state when the state is set back to ONLINE later on so that the device cannot be set online or offline any longer. To solve this, set online/offline and related rollback or error routines are processed only if the device is in a final or DISCONNECTED state. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: ensure to hold a reference for deferred deregistrationSebastian Ott
Ensure to always hold an extra device reference for scheduling a subchannel deregistration, by moving the get_device to ccw_device_schedule_sch_unregister. This fixes an use after free error in ccw_device_call_sch_unregister where put_device was called on an already freed device structure. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] qdio: continue polling if the queue is not finishedJan Glauber
With commit c38f96080955854e54df9cb392bc674e1ae330e1 polling was stopped for the queue even if new data is available. Return immediately after scheduling the queue tasklet if the queue is not done. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: increase trace levelSebastian Ott
Move debug traces for start I/O and interrupt events to exclusive trace levels. Also change tracing in hot-path from sprintf (costly) to hex. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: fix not oper handling after failed [on|off]line processingSebastian Ott
If online/offline processing of a ccw device fails, resulting in not operational state, notify the driver and unregister the device in case the driver dosn't want to keep it. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: consolidate subchannel intparm resetPeter Oberparleiter
Ensure that the hardware interruption parameter for a subchannel is reset when the associated subchannel data structure is freed. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: move scsw helper functions to header fileHeiko Carstens
All scsw helper functions are very short and usage of them shouldn't result in function calls. Therefore we move them to a separate header file. Also saves a lot of EXPORT_SYMBOLs. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: fix ineffective verify eventPeter Oberparleiter
Path verification events occurring for offline devices are currently ignored. As a result, offline devices are not removed, even though they might no longer be accessible (for example because the last path to the device was varied offline). Fix this by scheduling a status evaluation for the affected subchannel when a path verification event occurs. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11writeback: add name to backing_dev_infoJens Axboe
This enables us to track who does what and print info. Its main use is catching dirty inodes on the default_backing_dev_info, so we can fix that up. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11writeback: get rid of generic_sync_sb_inodes() exportJens Axboe
This adds two new exported functions: - writeback_inodes_sb(), which only attempts to writeback dirty inodes on this super_block, for WB_SYNC_NONE writeout. - sync_inodes_sb(), which writes out all dirty inodes on this super_block and also waits for the IO to complete. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11pata_rz1000: use printk_onceMarcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-11ahci: kill @force_restart and refine CLO for ahci_kick_engine()Shane Huang
This patch refines ahci_kick_engine() after discussion with Tejun about FBS(FIS-based switching) support preparation: a. Kill @force_restart and always kick the engine. The only case where @force_restart is zero is when it's called from ahci_p5wdh_hardreset() Actually at that point, BSY is pretty much guaranteed to be set. b. If PMP is attached, ignore busy and always do CLO. (AHCI-1.3 9.2) Signed-off-by: Shane Huang <shane.huang@amd.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-11pata_cs5535: add pci id for AMD based CS5535 controllersOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-11ahci: Add AMD SB900 SATA/IDE controller device IDsShane Huang
Add AMD SB900 SATA/IDE controller device IDs. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-11drivers/ata: use resource_sizeJulia Lawall
Use the function resource_size, which reduces the chance of introducing off-by-one errors in calculating the resource size. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-10Merge branch 'mad' into for-linusRoland Dreier
Conflicts: drivers/infiniband/core/mad.c
2009-09-10Merge branches 'cxgb3', 'ehca', 'ipath', 'ipoib', 'misc', 'mlx4', 'mthca' ↵Roland Dreier
and 'nes' into for-linus