summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-08-13firewire: core: handle ack_busy when fetching the Config ROMStefan Richter
Some older Panasonic made camcorders (Panasonic AG-EZ30 and NV-DX110, Grundig Scenos DLC 2000) reject requests with ack_busy_X if a request is sent immediately after they sent a response to a prior transaction. This causes firewire-core to fail probing of the camcorder with "giving up on config rom for node id ...". Consequently, programs like kino or dvgrab are unaware of the presence of a camcorder. Such transaction failures happen also with the ieee1394 driver stack (of the 2.4...2.6 kernel series until 2.6.36 inclusive) but with a lower likelihood, such that kino or dvgrab are generally able to use these camcorders via the older driver stack. The cause for firewire-ohci's or firewire-core's worse behavior is not yet known. Gap count optimization in firewire-core is not the cause. Perhaps the slightly higher latency of transaction completion in the older stack plays a role. (ieee1394: AR-resp DMA context tasklet -> packet completion ktread -> user process; firewire-core: tasklet -> user process.) This change introduces retries and delays after ack_busy_X into firewire-core's Config ROM reader, such that at least firewire-core's probing and /dev/fw* creation are successful. This still leaves the problem that userland processes are facing transaction failures. gscanbus's built-in retry routines deal with them successfully, but neither kino's nor dvgrab's do ever succeed. But at least DV capture with "dvgrab -noavc -card 0" works now. Live video preview in kino works too, but not actual capture. One way to prevent Configuration ROM reading failures in application programs is to modify libraw1394 to synthesize read responses by means of firewire-core's Configuration ROM cache. This would only leave CMP and FCP transaction failures as a potential problem source for applications. Reported-and-tested-by: Thomas Seilund <tps@netmaster.dk> Reported-and-tested-by: René Fritz <rene@colorcube.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-12Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits) USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-device USB: Serial: Add device ID for Sierra Wireless MC8305 USB: Serial: Added device ID for Qualcomm Modem in Sagemcom's HiLo3G usb/host/pci-quirks.c: correct annotation of `ehci_dmi_nohandoff_table' USB: option driver: add PID for Vodafone-Huawei K4511 USB: option driver: add PID for Vodafone-Huawei K4510 USB: option driver: add PID for Vodafone-Huawei K3771 USB: option driver: add PID for Vodafone-Huawei K3770 usb: serial: ftdi_sio.c: For the FT232H FTDI_SIO_SET_BAUDRATE_REQUEST, index needs to be shifted too usb/isp1760: Added missing call to usb_hcd_check_unlink_urb() during unlink USB: EHCI: Fix test mode sequence USB: ftdi_sio: fix minor typo in get_ftdi_divisor USB: at91_udc: include linux/prefetch.h explicitly USB: usb-storage: unusual_devs entry for ARM V2M motherboard. usb/ehci-mxc: add missing inclusion of mach/hardware.h USB: assign instead of equal in usbtmc.c usb: renesas_usbhs: fixup usbhsg_for_each_uep 1st pos usb: renesas_usbhs: fix DMA build by including dma-mapping.h usb: gadget: net2272 - Correct includes usb: musb: fix oops on musb_gadget_pullup ...
2011-08-12Merge branch 'staging-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: zcache: Fix build error when sysfs is not defined zcache: Use div_u64 for 64-bit division staging:rts_pstor: fix thread synchronization flow drivers:staging:solo6x10:add the missed slab.h staging: zcache: include module.h for MODULE_LICENSE drivers/staging/hv/blkvsc_drv.c: eliminate NULL pointer dereference Staging: Add clk API note to nvec/TODO drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c: adjust array index staging: more missing slab.h inclusions drivers/staging/solo6x10/p2m.c needs slab.h drivers/staging/solo6x10/core.c needs slab.h drivers/staging/dt3155v4l/dt3155v4l.c needs slab.h drivers/staging/speakup/devsynth.c: fix "buffer size is not provably correct" error Staging: iio: add some unlocks to raw_read() functions staging: ft1000_proc needs asm/io.h for inw/outw on sparc staging: rtl8192u: declare MODULE_FIRMWARE gma500: Fix clashes with DRM updates staging: zcache: module is GPL staging: fix zcache building
2011-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) e1000e: increase driver version number e1000e: alternate MAC address update e1000e: do not disable receiver on 82574/82583 e1000e: alternate MAC address does not work on device id 0x1060 PCnet: Fix section mismatch bnx2x: disable dcb on 578xx since not supported yet bnx2x: properly clean indirect addresses bnx2x: prevent race between undi_unload and load flows bnx2x: fix select_queue when FCoE is disabled bnx2x: init FCOE FP only once ipv4: some rt_iif -> rt_route_iif conversions net/bridge/netfilter/ebtables.c: use available error handling code net/netlabel/netlabel_kapi.c: add missing cleanup code net/irda: sh_sir: tidyup compile warning net/irda: sh_sir: add missing header net/irda: sh_irda: add missing header slcan: ldisc generated skbs are received in softirq context scm: Capture the full credentials of the scm sender tcp: initialize variable ecn_ok in syncookies path drivers/net/wireless/wl1251: add missing kfree ...
2011-08-12firewire: ohci: fix DMA unmapping in an error pathStefan Richter
If request_irq failed, we would pass wrong arguments to dma_free_coherent. https://bugzilla.redhat.com/show_bug.cgi?id=728185 Reported-by: Mads Kiilerich Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-12firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner casesStefan Richter
Clemens points out that we need to use compat_ptr() in order to safely cast from u64 to addresses of a 32-bit usermode client. Before, our conversion went wrong - in practice if the client cast from pointer to integer such that sign-extension happened, (libraw1394 and libdc1394 at least were not doing that, IOW were not affected) or - in theory on s390 (which doesn't have FireWire though) and on the tile architecture, regardless of what the client does. The bug would usually be observed as the initial get_info ioctl failing with "Bad address" (EFAULT). Reported-by: Carl Karsten <carl@personnelware.com> Reported-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-12drm/radeon: re-POST the asic on Apple hardware when booted via EFIMatthew Garrett
At least some Apples program the GPU into a state that wedges the engine once userspace starts trying to perform accelerated operations. Executing the Atom init scripts gets the hardware back into a working state. The same hardware works fine when booted via BIOS emulation, so let's just execute the init scripts on Apples when we're using EFI. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon: Allow panel preferred EDID to override BIOS native modeMatthew Garrett
We have two sources of information about panel capabilities on mobile radeon - the BIOS, which gives us a native mode, and the panel's preferred mode. In theory these two will always match, but there's some corner cases where the BIOS hasn't been fully initialised and so the native mode in it ends up with default values. However, if we get a panel with reasonable EDID, it's probably the case that the panel's preferred mode does actually represent the panel capabilities. This patch handles that case by replacing the native mode with the panel's preferred mode if the resolutions don't match. Systems without a valid internal panel EDID will still use the BIOS native mode. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon/kms: make some watermark messages debug onlyAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon/kms: fix regression is handling >2 heads on cedar/caicosAlex Deucher
Need to add support for 4 crtcs when setting the possible crtcs for the encoders. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon/kms: don't enable connectors that are off in the hotplug handlerAlex Deucher
If we get a hotplug event on an connector that is off, don't attempt to turn it on or off, it should already be off. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=728228 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-11Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-08-12regmap: Specify a module licenseStephen Warren
CONFIG_REGMAP_I2C/SPI are set to m when selected by a tristate config option that's set to m. The regmap modules don't specify a license, so fail to link to regmap_init at load time, since that is EXPORT_SYMBOL_GPL. Fix this by specifying a license for the regmap modules. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-11e1000e: increase driver version numberBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11e1000e: alternate MAC address updateBruce Allan
If word 0x37 in the EEPROM is 0xFFFF _or_ 0x0000, then there is no alternate MAC address in the EEPROM. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11e1000e: do not disable receiver on 82574/82583Bruce Allan
Due to a hardware erratum, the receiver on 82574 and 82583 should not be stopped once it has been started. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11e1000e: alternate MAC address does not work on device id 0x1060Bruce Allan
This issue is present all the way back to 2.6.34 kernels. CC: <stable@kernel.org> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeffrey Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-08-11hwmon: (ibmaem) add missing kfreeJulia Lawall
rs_resp is dynamically allocated in aem_read_sensor(), so it should be freed before exiting in every case. This collects the kfree and the return at the end of the function. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@kernel.org # 2.6.27+
2011-08-11hwmon: (pmbus/lm25066) Ignore byte writes to non-zero pagesGuenter Roeck
pmbus_clear_faults() attempts to clear faults on non-existing real pages. As a result, the command error bit in the status register is set, and faults are not really cleared. All byte writes to non-zero pages are requests to clear the status register on that page. Since non-zero pages are virtual and do not exist on the chip, there is nothing to do, and such requests have to be ignored. This fixes above problem. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-08-11hwmon: (pmbus) Virtualize pmbus_write_byteGuenter Roeck
With virtual pages and to be able to handle more chips, it is necessary to virtualise pmbus_write_byte(). Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-08-11Revert "EDAC: Correct Kconfig dependencies"Linus Torvalds
This reverts commit af9d220bac41dc3201893e1601cc7c44f7da4498. It turns out that one was meant to be applied on top of the edac.git tree in -next that has more i7core_edac changes, but that wasn't clear in the original email. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11PCnet: Fix section mismatchRalf Baechle
Building MIPS mtx1_defconfig results in: MODPOST 735 modules WARNING: drivers/net/pcnet32.o(.devinit.text+0x11ec): Section mismatch in reference from the function pcnet32_probe_vlbus.constprop.22() to the variable .init.data:pcnet32_portlist The function __devinit pcnet32_probe_vlbus.constprop.22() references a variable __initdata pcnet32_portlist. If pcnet32_portlist is only used by pcnet32_probe_vlbus.constprop.22 then annotate pcnet32_portlist with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: disable dcb on 578xx since not supported yetDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: properly clean indirect addressesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: prevent race between undi_unload and load flowsDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: fix select_queue when FCoE is disabledVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: init FCOE FP only onceVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/irda: sh_sir: tidyup compile warningKuninori Morimoto
This patch tidyup below warning ${LINUX}/drivers/net/irda/sh_sir.c:514:6: warning: 'val' may be used uninitialized in this function Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/irda: sh_sir: add missing headerKuninori Morimoto
This patch fixup below build error on sh_sir sh_sir.c: In function 'sh_sir_write': sh_sir.c:127:2: error: implicit declaration of function 'iowrite16' sh_sir.c: In function 'sh_sir_read': sh_sir.c:132:2: error: implicit declaration of function 'ioread16' sh_sir.c: At top level: sh_sir.c:561:20: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sh_sir_irq' sh_sir.c: In function 'sh_sir_probe': sh_sir.c:727:2: error: implicit declaration of function 'ioremap_nocache' sh_sir.c:727:16: warning: assignment makes pointer from integer without a cast sh_sir.c:762:2: error: implicit declaration of function 'request_irq' sh_sir.c:762:23: error: 'sh_sir_irq' undeclared (first use in this function) sh_sir.c:762:23: note: each undeclared identifier is reported only once for each function it appears in sh_sir.c:762:35: error: 'IRQF_DISABLED' undeclared (first use in this function) sh_sir.c:776:2: error: implicit declaration of function 'iounmap' sh_sir.c: At top level: sh_sir.c:436:13: warning: 'sh_sir_clear_all_err' defined but not used sh_sir.c:474:12: warning: 'sh_sir_is_which_phase' defined but not used sh_sir.c:490:13: warning: 'sh_sir_tx' defined but not used sh_sir.c:540:13: warning: 'sh_sir_rx' defined but not used Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/irda: sh_irda: add missing headerKuninori Morimoto
This patch fixup below build error on sh_irda sh_irda.c: In function 'sh_irda_write': sh_irda.c:174: error: implicit declaration of function 'iowrite16' sh_irda.c: In function 'sh_irda_read': sh_irda.c:184: error: implicit declaration of function 'ioread16' sh_irda.c: At top level: sh_irda.c:492: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sh_irda_irq' sh_irda.c: In function 'sh_irda_probe': sh_irda.c:776: error: implicit declaration of function 'ioremap_nocache' sh_irda.c:776: warning: assignment makes pointer from integer without a cast sh_irda.c:811: error: implicit declaration of function 'request_irq' sh_irda.c:811: error: 'sh_irda_irq' undeclared (first use in this function) sh_irda.c:811: error: (Each undeclared identifier is reported only once sh_irda.c:811: error: for each function it appears in.) sh_irda.c:811: error: 'IRQF_DISABLED' undeclared (first use in this function) sh_irda.c:825: error: implicit declaration of function 'iounmap' Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11slcan: ldisc generated skbs are received in softirq contextOliver Hartkopp
As this discussion pointed out http://marc.info/?l=linux-netdev&m=131257225602375 netdevices that are based on serial line disciplines should use netif_rx_ni() when pushing received socketbuffers into the netdev rx queue. Following commit 614851601c121b1320a35757ab88292d6272f906 ("slip: fix NOHZ local_softirq_pending 08 warning") this patch updates the slcan driver accordingly. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> CC: Matvejchikov Ilya <matvejchikov@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-10USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-deviceArtur Zimmer
Here is a patch for a new PID (zeitcontrol-device mifare-reader FT232BL(like FT232BM but lead free)). Signed-off-by: Artur Zimmer <artur128@3dzimmer.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-10USB: Serial: Add device ID for Sierra Wireless MC8305Florian Echtler
A new device ID pair is added for Sierra Wireless MC8305. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-10Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: drop experimental status for ARM_PATCH_PHYS_VIRT ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correct ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned access model ARM: 7010/1: mm: fix invalid loop for poison_init_mem ARM: 7005/1: freshen up mm/proc-arm946.S dmaengine: PL08x: Fix trivial build error ARM: Fix build error for SMP=n builds
2011-08-10drivers/net/wireless/wl1251: add missing kfreeJulia Lawall
In each case, the kfree already at the end of the function is also needed in the error case. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10EDAC: Correct Kconfig dependenciesBorislav Petkov
Both AMD and Intel i7 EDAC drivers use MCE features and are thus dependent of this functionality present in the kernel. Express this in Kconfig so that randconfig builds don't break. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09ath5k: fix error handling in ath5k_beacon_sendBob Copeland
This cleans up error handling for the beacon in case of dma mapping failure. We need to free the skb when dma mapping fails instead of nulling and leaking the pointer, and we should bail out to avoid giving the hardware the bad descriptor. Finally, we need to perform the null check after trying to update the beacon, or else beacons will never be sent after a single mapping failure. Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09rt2x00: Add rt2870 device id for Dvico usb keyAnthony Bourguignon
This patch add a device id for the wifi usb keys shiped by DVICO with some of their tvix hardware. Signed-off-by: Anthony Bourguignon <contact+kernel@toniob.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k: fix a misprint which leads to incorrect calibrationAlex Hacker
This patch addresses an issue with incorrect HW register AR_PHY_TX_IQCAL_CORR_COEFF_B1 definition which leads to incorrect clibration. Cc: stable@kernel.org Signed-off-by: Alex Hacker <hacker@epn.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09rt2x00: Add new rt73 buffalo USB idIvo van Doorn
Reported-by: Maik-Holger Freudenberg <hhfeuer@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09rtlwifi: rtl892cu: New USB IDsLarry Finger
This patch fixes several problems in the USB_DEVICE table, including missing IDs, reversed vendor/product codes, and a duplicate ID. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k_hw: update PMU to improve ripple issue for AR9485Rajkumar Manoharan
The commit ebefce3d13f8b5a871337ff7c3821ee140c1ea8a failed to set proper PMU value to address ripple issue for AR9485. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k_hw: Fix incorrect Tx control power in AR9003 templateRajkumar Manoharan
CTL power data incorrect in ctlPowerData_2G field of ar9300_eeprom. Setting incorrect CTL power in calibration is causing lower tx power. Tx power was reported as 3dBm while operating in channel 6 HT40+/ in channel 11 HT40- due to CTL powers in the calibration is set to zero. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09b43: read correct register on bcma bus.Hauke Mehrtens
This causes an databus error on a Broadcom SoC using bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09Merge branch 'stable/for-jens' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
2011-08-09drm/i915: split out PCH refclk update codeJesse Barnes
We ought to be calling this from our DPMS routines as well as global state may change and we need to enable/disable clocks. So split out the code in preparation for further changes. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-09drm/i915: show interrupt info on IVBJesse Barnes
IVB uses the same interrupt reg layout as SNB, so add an IS_GEN7 to the interrupt debugfs file. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-09gma500: Fix clashes with DRM updatesAlan Cox
The private object support has migrated from gma500 into the DRM core, remove our now clashing copy. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09xen/blkback: Make description more obvious.Konrad Rzeszutek Wilk
With the frontend having Xen but the backend not, it just looks odd: <*> Xen virtual block device support <*> Block-device backend driver Fix it to have the 'Xen' in front of it. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-28 15:18:51 +0000