summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-02-11Bluetooth: Add firmware support for Atheros 3012Bala Shanmugam
Blacklisted AR3012 PID in btusb and added the same in ath3k to load patch and sysconfig files. Signed-off-by: Bala Shanmugam <sbalashanmugam@atheros.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-09ssb: extract boardflags2 for SPROMs rev 4 and 5Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09iwlwifi: fix ack health for WiFi/BT combo devicesStanislaw Gruszka
Combo devices have TX statistics on different place, because struct statistics_rx_bt and struct statistics_rx have different size. User proper values on combo devices instead of random data. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09iwlwifi: cleanup iwl_good_ack_healthStanislaw Gruszka
Make ack health code easies to read. Compared to previous code, we do not print debug messages when expected_ack_cnt_delta == 0 and also do check against negative deltas. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09iwlwifi: cleanup iwl_recover_from_statisticsStanislaw Gruszka
No functional change, make recover from statistics code easies to read. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ath9k: Remove redundant beacon_intervalSteve Brown
The variable appears in both ath_softc and ath_beacon_config. The struct ath_beacon_config is embedded in ath_softc. The redundant variable was added by commit id 57c4d7b4c4986037be51476b8e3025d5ba18d8b8. Signed-off-by: Steve Brown <sbrown@cortland.com> Reviewed-by: Mohammed Shafi <shafi.ath9k@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ath9k: Add debug info for configuring power level.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ath9k: Print channel-type in chan-change dbg message.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2011-02-08wl12xx: set supported_rates after associationEliad Peller
Instead of looking for supported_rates change on every tx packet, just extract the supported_rates after association completes (station only). Remove wl1271.sta_rate_set and WL1271_FLAG_STA_RATES_CHANGED which are not used anymore. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08wl12xx: use the conf struct instead of macros for memory configurationEliad Peller
make the configuration management more flexible by using the conf struct, rather than predefined macros. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08wl12xx: move to new firmware (6.1.3.50.49)Eliad Peller
This patch adds support for the new wl12xx firmware (Rev 6.1.3.50.49) Since this fw is not backward compatible with previous fw versions, a new fw (with different name) is being fetched. (the patch is big because it contains all the required fw api changes. splitting it into multiple patches will result in corrupted intermediate commits) Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08wl12xx: mcp2.5 - add config_ps acxEliad Peller
mcp2.5 uses this acx to configure the fw only once, rather than passing the params in every enter psm command. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08Bluetooth: ath3k: Avoid duplication of codeRogério Brito
In commit 86e09287e4f8c81831b4d4118a48597565f0d21b, to reduce memory usage, the functions of the ath3k module were rewritten to release the firmware blob after it has been loaded (successfully or not). The resuting code has some redundancy and the compiler can potentially produce better code if we omit a function call that is unconditionally executed in ,---- | if (ath3k_load_firmware(udev, firmware)) { | release_firmware(firmware); | return -EIO; | } | release_firmware(firmware); | | return 0; | } `---- It may also be argued that the rewritten code becomes easier to read, and also to see the code coverage of the snippet in question. Signed-off-by: Rogério Brito <rbrito@ime.usp.br> Cc: Alexander Holler <holler@ahsoftware.de> Cc: "Gustavo F. Padovan" <padovan@profusion.mobi> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Merge branch 'master' of ↵Gustavo F. Padovan
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6 into wireless
2011-02-07ath9k: Update comments for not parsing DTIM periodMohammed Shafi Shajakhan
Add few comments for not parsing DTIM period from mac80211 Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07ath5k: Fix fast channel switchingNick Kossifidis
Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-06iwlwifi: fix compiling error with different configurationWey-Yi Guy
When .config has different configuration, it might fail to compile iwlwifi. fix it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-06iwlwifi: remove unnecessary lockingJohannes Berg
This code, and the places that set the variable is_internal_short_scan and the vif pointers are all protected by the mutex, there's no point in locking the spinlock here as well (any more). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-04ath9k: add additional checks for the baseband hang detectionFelix Fietkau
Since even with the latest changes the false positive issue of the baseband hang check is not fully solved yet, additional checks are needed. If the baseband hang occurs, the rx_clear signal will be stuck to high, so we can use the cycle counters to confirm it. With this patch, a hardware reset is only triggered if the baseband hang check returned true three times in a row, with a beacon interval between each check and if the busy time was also 99% or more during the check intervals. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04ath: Fix clearing of secondary key cache entry for TKIPJouni Malinen
All register writes to the key cache have to be done in pairs. However, the clearing of a separate MIC entry with hardware revisions that use combined MIC key layout did not do that with one of the registers. Add the matching register write to the following register to make the KEY4 register write actually complete. This is mostly a fix for a theoretical issue since the incorrect entry that could potentially be left behind in the key cache would not match with received frames. Anyway, better make this code clean the entry correctly using paired register writes. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: add useful debug outputJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: enable NL80211_IFTYPE_APJussi Kivilinna
It should be safe to enable AP-mode now. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: reset rx urbs after idle period of 30 secondsJussi Kivilinna
RX appears to freeze while idle. Resetting rx-urbs appears to be enough to fix this. Do reset 30 seconds after last rx. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setupJussi Kivilinna
When driver fails to acquire device semaphore lock, device usually freezes soon afterwards. So failing to acquire lock indicates us that not everything is going right in device/fw. So reset device when this happens. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: add TX watchdog and device resettingJussi Kivilinna
When doing transfers at high speed for long time, tx queue can freeze. So add tx watchdog. TX-watchdog checks for locked tx-urbs and reset hardware when such is detected. Merely unlinking urb was not enough, device have to be reseted. Hw settings are restored so that any open link will stay on after reset. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: collect driver settings and add function to restore theimJussi Kivilinna
We need HW hard reset later in patchset to reset device after TX-stall. Collect all settings that we have set to driver for later reset and add restore function. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: lower hw command timeoutsJussi Kivilinna
Device command timeouts are set up very high (1 sec) and this causes AP beacon to lock up for long for example. Checking timeouts on device it's easy to see that 1 sec timeout is not needed, when device fails to response longer timeout doesn't help: [ 473.074419] zd1211rw 1-1:1.0: print_times() Read times: [ 473.175163] zd1211rw 1-1:1.0: print_time() 0 - 10 msec: 1506 [ 473.176429] zd1211rw 1-1:1.0: print_time() 11 - 50 msec: 0 [ 473.177955] zd1211rw 1-1:1.0: print_time() 51 - 100 msec: 0 [ 473.180703] zd1211rw 1-1:1.0: print_time() 101 - 250 msec: 0 [ 473.182101] zd1211rw 1-1:1.0: print_time() 251 - 500 msec: 0 [ 473.183221] zd1211rw 1-1:1.0: print_time() 500 - 1000 msec: 20 [ 473.184381] zd1211rw 1-1:1.0: print_time() 1000 - ... msec: 18 Also vendor driver doesn't use this long timeout. Therefore change timeout to 50msec. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: change interrupt URB buffer to DMA bufferJussi Kivilinna
As might lower beacon update CPU usage. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: use stack and preallocated memory for small cmd-buffersJussi Kivilinna
Use stack for allocing small < 64 byte arrays in zd_chip.c and preallocated buffer in zd_usb.c. This might lower CPU usage for beacon setup. v2: - Do not use stack buffers in zd_usb.c as they would be used for urb transfer_buffer. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: batch beacon config commands togetherJussi Kivilinna
Beacon config function writes beacon to hw one write per byte. This is very slow (usually taking more than 100ms to finish) and causes high CPU usage when in AP-mode (kworker at ~50% on Intel Atom N270). By batching commands together zd_mac_config_beacon() runtime can be lowered to 1/5th and lower CPU usage to saner levels (<10% on Atom). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: add beacon watchdog and setting HW beacon more failsafeJussi Kivilinna
When doing tx/rx at high packet rate (for example simply using ping -f), device starts to fail to respond to control messages. On non-AP modes this only causes problems for LED updating code but when we are running in AP-mode we are writing new beacon to HW usually every 100ms. Now if control message fails in HW beacon setup, device lock is kept locked and beacon data partially written. This can and usually does cause: 1. HW beacon setup fail now on, as driver cannot acquire device lock. 2. Beacon-done interrupt stop working as device has incomplete beacon. Therefore make zd_mac_config_beacon() always try to release device lock and add beacon watchdog to restart beaconing when stall is detected. Also fix zd_mac_config_beacon() try acquiring device lock for max 500ms, as what old code appeared to be trying to do using loop and msleep(1). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc()Jussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flagJussi Kivilinna
Add support for AP-mode beacon. Also disable beacon when interface is set down as otherwise hw will keep flooding NEXT_BCN interrupts. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem ↵Jussi Kivilinna
on monitor For reasons not very clear yet to me, filter_ack leaves matching tx-packet pending with 'ack_pending'. This causes tx-packet to be passed back to upper layer after next packet has been transfered and tx-packets might end up coming come out of monitor interface in wrong order vs. rx. Because of this when enable AP-mode, hostapd monitor interface would get packets in wrong order causing problems in WPA association. So don't use mac->ack_pending when in AP-mode. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: support setting BSSID for AP modeJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: move set_rts_cts_work to bss_info_changedJussi Kivilinna
As bss_info_changed may sleep, we can as well set RTS_CTS register right away. Keep mac->short_preamble for later use (hw reset). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: move set_multicast_hash and set_rx_filter from workers to ↵Jussi Kivilinna
configure_filter Workers not needed anymore since configure_filter may sleep. Keep mac->multicast_hash for later use (hw reset). Signed-off-by: Jussi Kivilinna <jussi.kivilina@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: fix beacon interval setupJussi Kivilinna
Vendor driver uses CR_BNC_INTERVAL at various places, one is HW_EnableBeacon() that combinies beacon interval with BSS-type flag and DTIM value in upper 16bit of u32. The other one is HW_UpdateBcnInterval() that set_aw_pt_bi() appears to be based on. HW_UpdateBcnInterval() takes interval argument as u16 and uses that for calculations, set_aw_pt_bi() uses u32 value that has flags and dtim in upper part. This clearly seems wrong. Also HW_UpdateBcnInterval() updates only lower 16bit part of CR_BNC_INTERVAL. So make set_aw_pt_bi() do calculations on only lower u16 part of s->beacon_interval. Also set 32bit beacon interval register before reading values from device, as HW_EnableBeacon() on vendor driver does. This is required to make beacon work on AP-mode, simply reading and then writing updated values is not enough at least with zd1211b. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: add locking for mac->process_intrJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: cancel process_intr work on zd_chip_disable_int()Jussi Kivilinna
OOPS if worker is running and disconnect() is called (triggered by unpluging device). Much harder to trigger at this stage but later when we have AP beacon work in process_intr it happens very easy. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: use urb anchors for tx and fix tx-queue disablingJussi Kivilinna
When stress testing AP-mode I hit OOPS when unpluging or rmmodding driver. It appears that when tx-queue is disabled, tx-urbs might be left pending. These can cause ehci to call non-existing tx_urb_complete() (after rmmod) or uninitialized/reseted private structure (after disconnect()). Add skb queue for submitted packets and unlink pending urbs on zd_usb_disable_tx(). Part of the problem seems to be usb->free_urb_list that isn't always working as it should, causing machine freeze when trying to free the list in zd_usb_disable_tx(). Caching free urbs isn't what other drivers seem to be doing (usbnet for example) so strip free_usb_list. Patch makes tx-urb handling saner with use of urb anchors. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03drivers:net:ipw2100.c change a typo comamnd to commandJustin P. Mattock
The below patch fixes a typo comamnd to command. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03ath9k: reserve a beacon slot on beaconing vif additionRajkumar Manoharan
The beaconing vif addition is based on max beacon slot available. So it is better to reserve a beacon slot on interface addition and let it be configured properly on bss_info change. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03ath9k: Show channel type and frequency in debugfs.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03ath9k: do not access hw registers in FULL SLEEPRajkumar Manoharan
The opmode recalculation is accessing hw registers. When it is called from remove interface callback and if there are no vifs present then hw is moved to FULL SLEEP by radio disable. So use power save wrappers before accessing hw registers in calculating opmode state. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03ath9k_htc: make use common of function to update txpowerRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03ath9k: move update tx power to commonRajkumar Manoharan
move ath_update_txpow to common to remove code duplication in both ath9k & ath9k_htc. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03ath9k: use common get current channel functionRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03ath9k_htc: cancel ani work in ath9k_htc_stopRajkumar Manoharan
ani work is cancelled in dissaoctiation. But in some cases during suspend, deauthention never be called. So we failed to stop ani work which was identified by the following warning. Call Trace: [<ffffffffa0454a1d>] ieee80211_can_queue_work.clone.17+0x2d/0x40 [mac80211] [<ffffffffa0454a60>] ieee80211_queue_delayed_work+0x30/0x60 [mac80211] [<ffffffffa0567f82>] ath9k_ani_work+0x142/0x250 [ath9k_htc] [<ffffffff81073c70>] async_run_entry_fn+0x0/0x180 [<ffffffffa0567e40>] ath9k_ani_work+0x0/0x250 [ath9k_htc] Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 17:25:43 +0000