summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-05-13wl12xx: prevent scheduling while suspending (WoW enabled)Eliad Peller
When WoW is enabled, the interface will stay up and the chip will be powered on, so we have to flush/cancel any remaining work, and prevent the irq handler from scheduling a new work until the system is resumed. Add 2 new flags: * WL1271_FLAG_SUSPENDED - the system is (about to be) suspended. * WL1271_FLAG_PENDING_WORK - there is a pending irq work which should be scheduled when the system is being resumed. In order to wake-up the system while getting an irq, we initialize the device as wakeup device, and calling pm_wakeup_event() upon getting the interrupt (while the system is about to be suspended) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx_sdio: set MMC_PM_KEEP_POWER flag on suspendEliad Peller
if a wow trigger was configured, set the MMC_PM_KEEP_POWER flag on suspend, so our power will be kept while the system is suspended. We needed to set this flag on each suspend attempt (when we want to keep power) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: declare suspend/resume callbacks (for wowlan)Eliad Peller
Additionally, add wow_enabled field to wl, to indicate whether wowlan was configured. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx_sdio: set interrupt as wake_up interruptEliad Peller
set the sdio interrupt as wake_up interrupt, so we will be able to wake up the suspended system (Wake-On-Wireless) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: remove unused flag WL1271_FLAG_IDLE_REQUESTEDLuciano Coelho
This flag is not used anymore, remove it from the list. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: prevent sched_scan when not idle or not in station modeLuciano Coelho
The current firmware only supports scheduled scan in station mode and when idle. To prevent the firmware from crashing, return -EOPNOTSUPP when sched_scan start is called in an invalid state. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: export scheduled scan state in debugfsLuciano Coelho
Add the sched_scanning value to the driver_status debugfs entry. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: implement scheduled scan driver operations and reportingLuciano Coelho
This patch adds the mac80211 operations for scheduled scan and the scheduled scan results reporting. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: add scheduled scan structures and commandsLuciano Coelho
Add firmware command structures, definitions and code to to configure, start and stop scheduled scans. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: listen to scheduled scan eventsLuciano Coelho
Subscribe and listen to PERIODIC_SCAN_REPORT_EVENT_ID and PERIODIC_SCAN_COMPLETE_EVENT_ID in preparation for the scheduled scan implementation. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: add configuration values for scheduled scanLuciano Coelho
Add the structures and values for driver-configured scheduled scan parameters. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: add IEEE80211_HW_SPECTRUM_MGMT bit to the hw flagsShahar Levi
Set the spectrum management bit in the hw flags so that mac80211 will set the WLAN_CAPABILITY_SPECTRUM_MGMT bit in association requests (which in practice means that we support 802.11h spectrum management). [Reworded the commit log -- Luca.] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: Don't filter beacons that include changed HT IEsShahar Levi
This patch adds a beacon filter rule to pass up the beacons that contain changed HT information elements. These beacons need to be passed to mac80211 so that it can act on such changes. [Reworded commit log -- Luca.] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: simplify wl1271_ssid_set()Eliad Peller
Simplify wl1271_ssid_set by re-using cfg80211_find_ie instead of reimplementing it. Additionally, add a length check to prevent a potential buffer overflow. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-12ath9k_hw: Fix STA connection issues with AR9380 (XB113).Senthil Balasubramanian
XB113 (AR9380) 3x3 SB 5G only cards were failing to connect to APs due to incorrect xpabiaslevel configuration. fix it. Cc: stable@kernel.org Cc: Ray Li <ray.li@greenwavereality.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Aeolus Yang <aeolus.yang@atheros.com> Cc: compat@orbit-lab.org Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12mwifiex: remove mwifiex_recv_complete functionAmitkumar Karwar
The function - increments dropped rx_packet count if status code passed to it is "-1". - frees SKB buffer. But currently the function is being called with "0" status code. This patch replaces above function by dev_kfree_skb_any() call. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12bcma: pci: trivial: correct amount of maximum retriesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12ath9k_hw: fix dual band assumption for XB113Luis R. Rodriguez
The XB113 cards are single band, 5 GHz-only, but the default settings were configured to assume it was dual band. Users of these cards then would see 2.4 GHz channels but you would never get any scan results from these channels given that the radio is not present. Cc: stable@kernel.org Cc: Fiona Cain <Fiona.Cain@atheros.com> Cc: Ray Li <ray.li@greenwavereality.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Aeolus Yang <aeolus.yang@atheros.com> Cc: Dan Friedman <dan.friedman@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-05-11libertas: Add libertas_disablemesh module parameter to disable mesh interfaceSascha Silbe
This allows individual users and deployments to disable mesh support at runtime, i.e. without having to build and maintain a custom kernel. Based on a patch by Paul Fox <pgf@laptop.org>. Signed-off-by: Sascha Silbe <silbe@activitycentral.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mwifiex: cleanup ioctl.hBing Zhao
Some structures and macros in ioctl.h are redundant or no longer used. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mwifiex: remove redundant local structuresAmitkumar Karwar
Avoid use of local structure in the function if the structure is already allocated by the caller and the structure pointer is passed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11b43: implement timeouts workaroundRafał Miłecki
Documented in: <4DCA7E40.9070709@lwfinger.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ssb: move ssb_commit_settings and export itRafał Miłecki
Commiting settings is possible on devices without PCI core (but with CC core). Export it for usage in drivers supporting other cores. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11bcma: add missing GPIO defines, use PULL register only when availableRafał Miłecki
Similar patch was commited to ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath9k: fix a regression in PS frame filter handlingFelix Fietkau
Only leave filtering enabled for AP or VLAN interfaces, clear the destination mask for all other interfaces. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11b43: move MAC PHY clock controling functionRafał Miłecki
This is not N-PHY specific function, we partially duplicate code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11b43legacy: trivial: use TMSLOW def instead of magic valueRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath5k: Fix lockup due to un-init spinlock.Ben Greear
This was introduced in 2.6.39-rc1 it seems. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath9k: fix beaconing for mesh interfacesJavier Cardona
Mesh beaconing on ath9k was broken by this commit: commit 4801416c76a3a355076d6d371c00270dfe332e1c Author: Ben Greear <greearb@candelatech.com> Date: Sat Jan 15 19:13:48 2011 +0000 This patch assigns the right opmode when the device is used in mesh mode. Reported-by: Fabrice Deyber fabricedeyber@agilemesh.com Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11Bluetooth: Device ids for ath3k on Pegatron Lucid tabletsAndy Ross
New ath3k device IDs used on the Pegatron Lucid (ExoPC and WeTab) units. Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-11libertas: Use netdev_<level> or dev_<level> where possibleJoe Perches
Using the more descriptive logging styles gives a bit more information about the device being operated on. Makes the object trivially smaller too. $ size drivers/net/wireless/libertas/built-in.o.* 187730 2973 38488 229191 37f47 drivers/net/wireless/libertas/built-in.o.new 188195 2973 38488 229656 38118 drivers/net/wireless/libertas/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11libertas: Convert lbs_pr_<level> to pr_<level>Joe Perches
Use the standard pr_<level> functions eases grep a bit. Added a few missing terminating newlines to messages. Coalesced long formats. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ssb: update list of devices supporting multiple 80211 coresRafał Miłecki
Some of the BCM43xx chips contain cores that are attached to the SSB, but are inactive as they do not connect to the external environment. These must not be registered. Several of these types are handled in driver ssb; however, the specific case of an inactive 802.11 cores is now treated in b43 and b43legacy. Although the current setup works, this minor change will place all such workarounds in ssb, and simplify the code in drivers b43 and b43legacy. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10mwifiex: remove unnecessary struct mwifiex_opt_sleep_confirm_bufferAmitkumar Karwar
The structure definition is struct mwifiex_opt_sleep_confirm_buffer { u8 hdr[4]; struct mwifiex_opt_sleep_confirm ps_cfm_sleep; } __packed; For sleep_confirm command we already reserve 4 bytes (using skb_reserve()) for an interface header. It will be filled later by interface specific code. We don't need "hdr[4]" element in above structure. So we can use "struct mwifiex_opt_sleep_confirm" directly instead of "struct mwifiex_opt_sleep_confirm_buffer". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10bcma: add Broadcom specific AMBA bus driverRafał Miłecki
Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: Failed to set default beacon rssi in AP/IBSS modeRajkumar Manoharan
This beacon rssi will be used to set noisefloor during ani reset. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: Fix rssi update in ad-hoc modeRajkumar Manoharan
The average beacon rssi which will be used by ani is not updated in adhoc mode. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k_hw: Change DCU backoff thresh for AR9340Rajkumar Manoharan
By changing DCU backoff threshold for AR9340 to 1, helps to reduce rx overrurns seen while running bidirectional traffic. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k_hw: Corrected xpabiaslevel register settings for AR9340Rajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10rtlwifi: rtl8192cu: Fix memset/memcpy using sizeof(ptr) not sizeof(*ptr)Joe Perches
Found via coccinelle script @@ type T; T* ptr; expression E1; @@ * memset(E1, 0, sizeof(ptr)); Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k_hw: remove get_channel_noise functionMohammed Shafi Shajakhan
currently ath9k_hw_getchan_noise is not used anywhere Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10b43: trivial: include ssb word in ssb specific functionsRafał Miłecki
This can be helpful when we decide to add support for other buses. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10mwifiex: fix null derefs, mem leaks and triviaChristoph Fritz
This patch: - adds kfree() where necessary - prevents potential null dereferences - makes use of kfree_skb() - replaces -1 for failed kzallocs with -ENOMEM Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Kiran Divekar <dkiran@marvell.com> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10b43legacy: drop ssb-duplicated workaround for dangling coresRafał Miłecki
Remove the code to detect inactive 802.11 cores, as that function is now done in ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10b43: drop ssb-duplicated workaround for dangling coresRafał Miłecki
Remove the code to detect inactive 802.11 cores, as that function is now done in ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10rt2x00: Fix rmmod hang of rt2800pciGertjan van Wingerde
txstatus_timer should only be deleted for USB devices, as it is only initialized for USB devices. Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10p54pci: fix -Wunused-but-set-variable warningsChristian Lamparter
p54pci.c: In function ‘p54p_tx’: p54pci.c:334:6: warning: variable ‘device_idx’ set but not used Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10carl9170: fix -Wunused-but-set-variable warningsChristian Lamparter
tx.c: In function ‘carl9170_tx_accounting_free’: tx.c:159:28: warning: variable ‘txinfo’ set but not used tx.c: In function ‘carl9170_tx_status_process_ampdu’: tx.c:383:27: warning: variable ‘ar_info’ set but not used tx.c: In function ‘__carl9170_tx_process_status’: tx.c:626:27: warning: variable ‘arinfo’ set but not used tx.c: In function ‘carl9170_tx_ampdu_queue’: tx.c:1324:15: warning: variable ‘max’ set but not used Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10rtlwifi: rtl8192se: Remove need to disable ASPMChaoming Li
When this driver was initially submitted, the system would crash unless ASPM was disabled. This problem has been fixed. This patch also adds a printk that outputs the name of the firmware file that is used. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-23 08:25:37 +0000