summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2010-10-16via-velocity: forced 1000 Mbps mode support.françois romieu
Full duplex only. Half duplex 1000 Mbps is not supported. Signed-off-by: David Lv <DavidLv@viatech.com.cn> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Seguier Regis <rseguier@e-teleport.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16sundance: Add initial ethtool stats supportDenis Kirjanov
Add ethtool stats support. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16pch_gbe: fix if condition in set_settings()Dan Carpenter
There were no curly braces in this if condition so it always enabled full duplex. And ecmd->speed is an unsigned short so it is never equal to -1. The effect is that mii_ethtool_sset() fails with -EINVAL and an error is printed to dmesg. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16dnet: mark methods static and annotate for correct endiannessHarvey Harrison
Their doesn't appear to be bugs with the endianness handling here, just get the annotations right to keep sparse happy. Suppresses the following sparse warnings: drivers/net/dnet.c:30:5: warning: symbol 'dnet_readw_mac' was not declared. Should it be static? drivers/net/dnet.c:49:6: warning: symbol 'dnet_writew_mac' was not declared. Should it be static? drivers/net/dnet.c:364:5: warning: symbol 'dnet_phy_marvell_fixup' was not declared. Should it be static? drivers/net/dnet.c:66:13: warning: incorrect type in assignment (different base types) drivers/net/dnet.c:66:13: expected unsigned short [unsigned] [usertype] tmp drivers/net/dnet.c:66:13: got restricted __be16 [usertype] <noident> drivers/net/dnet.c:68:13: warning: incorrect type in assignment (different base types) drivers/net/dnet.c:68:13: expected unsigned short [unsigned] [usertype] tmp drivers/net/dnet.c:68:13: got restricted __be16 [usertype] <noident> drivers/net/dnet.c:70:13: warning: incorrect type in assignment (different base types) drivers/net/dnet.c:70:13: expected unsigned short [unsigned] [usertype] tmp drivers/net/dnet.c:70:13: got restricted __be16 [usertype] <noident> drivers/net/dnet.c:92:27: warning: cast to restricted __be16 drivers/net/dnet.c:94:33: warning: cast to restricted __be16 drivers/net/dnet.c:96:33: warning: cast to restricted __be16 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16cxgb4vf: make single bit signed bitfields unsignedHarvey Harrison
Single bit signed bitfields don't make a lot of sense, noticed by sparse: drivers/net/cxgb4vf/t4vf_common.h:135:31: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:136:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:137:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:138:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:139:36: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:140:31: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:141:31: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:142:35: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:143:35: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:154:27: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:155:26: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:156:27: error: dubious one-bit signed bitfield drivers/net/cxgb4vf/t4vf_common.h:157:26: error: dubious one-bit signed bitfield Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16r8169: use 50% less ram for RX ringEric Dumazet
Using standard skb allocations in r8169 leads to order-3 allocations (if PAGE_SIZE=4096), because NIC needs 16383 bytes, and skb overhead makes this bigger than 16384 -> 32768 bytes per "skb" Using kmalloc() permits to reduce memory requirements of one r8169 nic by 4Mbytes. (256 frames * 16Kbytes). This is fine since a hardware bug requires us to copy incoming frames, so we build real skb when doing this copy. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-15ixgbe: DCB: remove DCB check configJohn Fastabend
Remove a DCB check config from DCB configuration we continue to configure DCB even if it fails so don't even bother to check. Plus user space (lldpad) checks this before programming the hw anyways. Worse case is we program some values into the hw that don't make total sense resulting in incorrect bandwidth allocation. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14igb: add check for fiber/serdes devices to igb_set_spd_dplx;Carolyn Wyborny
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14ixgbe: declare functions as staticEmil Tantilov
Following patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14ixgbe: remove unused functionsEmil Tantilov
Remove functions that are declared, but not used in the driver. This patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14cnic: Add support for 57712 deviceMichael Chan
Add new interrupt ack functions and other hardware interface logic to support the new device. Update version to 2.2.6. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14cnic: Decouple uio close from cnic shutdownMichael Chan
During cnic shutdown, the original driver code requires userspace to close the uio device within a few seconds. This doesn't always happen as the userapp may be hung or otherwise take a long time to close. The system may crash when this happens. We fix the problem by decoupling the uio structures from the cnic structures during cnic shutdown. We do not unregister the uio device until the cnic driver is unloaded. This eliminates the unreliable wait loop for uio to close. All uio structures are kept in a linked list. If the device is shutdown and later brought back up again, the uio strcture will be found in the linked list and coupled back to the cnic structures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14cnic: Add cnic_uio_dev structMichael Chan
and put all uio related structures and ring buffers in it. This allows uio operations to be done independent of the cnic device structures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14cnic: Add cnic_free_uio()Michael Chan
to free all UIO related structures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14cnic: Defer iscsi connection cleanupMichael Chan
The bnx2x devices require a 2 second quiet time before sending the last RAMROD command to destroy a connection. This sleep wait adds up to a long delay when iscsid is serially destroying maultiple connections. Create a workqueue to perform the final connection cleanup in the background to speed up the process. This significantly speeds up the process as the wait time can be done in parallel for multiple connections. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14cnic: Add cnic_bnx2x_destroy_ramrod()Michael Chan
Refactoring code for the next patch to defer connection clean up. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14cnic: Convert ctx_flags to bit fieldsMichael Chan
so that we can additional bit definitions without requiring a spinlock. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14cnic: Add common cnic_request_irq()Michael Chan
to reduce some duplicate code. Also, use tasklet_kill() in cnic_free_irq() to wait for the cnic_irq_task to complete. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13s390: ctcm_mpc: Fix build after netdev refcount changes.David S. Miller
Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-12net: percpu net_device refcountEric Dumazet
We tried very hard to remove all possible dev_hold()/dev_put() pairs in network stack, using RCU conversions. There is still an unavoidable device refcount change for every dst we create/destroy, and this can slow down some workloads (routers or some app servers, mmap af_packet) We can switch to a percpu refcount implementation, now dynamic per_cpu infrastructure is mature. On a 64 cpus machine, this consumes 256 bytes per device. On x86, dev_hold(dev) code : before lock incl 0x280(%ebx) after: movl 0x260(%ebx),%eax incl fs:(%eax) Stress bench : (Sending 160.000.000 UDP frames, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_TRIE) Before: real 1m1.662s user 0m14.373s sys 12m55.960s After: real 0m51.179s user 0m15.329s sys 10m15.942s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-12bnx2x: Fixing a typo: added a missing RSS enablementDmitry Kravkov
Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11bnx2: Enable AER on PCIE devices onlyMichael Chan
To prevent unnecessary error message. pci_save_state() is also moved to the end of ->probe() so that all PCI config, including AER state, will be saved. Update version to 2.0.18. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11bnx2: Update firmware to 6.0.x.Michael Chan
- Improved flow control and simplified interface - Use hardware RSS indirection table instead of the slower firmware- based table - Lower latency interrupt on 5709 Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/ethtool.c
2010-10-11NET: pch, fix use after freeJiri Slaby
Stanse found that pch_gbe_xmit_frame uses skb after it is freed. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Masayuki Ohtake <masa-korg@dsn.okisemi.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11NET: wimax, fix use after freeJiri Slaby
Stanse found that i2400m_rx frees skb, but still uses skb->len even though it has skb_len defined. So use skb_len properly in the code. And also define it unsinged int rather than size_t to solve compilation warnings. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: linux-wimax@intel.com Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11ATM: iphase, remove sleep-inside-atomicJiri Slaby
Stanse found that ia_init_one locks a spinlock and inside of that it calls ia_start which calls: * request_irq * tx_init which does kmalloc(GFP_KERNEL) Both of them can thus sleep and result in a deadlock. I don't see a reason to have a per-device spinlock there which is used only there and inited right before the lock location. So remove it completely. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11ATM: solos-pci, remove use after freeJiri Slaby
Stanse found we do in console_show: kfree_skb(skb); return skb->len; which is not good. Fix that by remembering the len and use it in the function instead. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-10net/fec: carrier off initially to avoid root mount failureOskar Schirmer
with hardware slow in negotiation, the system did freeze while trying to mount root on nfs at boot time. the link state has not been initialised so network stack tried to start transmission right away. this caused instant retries, as the driver solely stated business upon link down, rendering the system unusable. notify carrier off initially to prevent transmission until phylib will report link up. Signed-off-by: Oskar Schirmer <oskar@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11irda: Test index before read in stir421x_patch_device()Roel Kluin
Test whether index exceeds fw->size before reading the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
2010-10-09sundance: get_stats proper lockingEric Dumazet
sundance get_stats() should not be run concurrently, add a lock to avoid potential losses. Note: Remove unused rx_lock field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09net/tg3: simplify conditionalNicolas Kaiser
Simplify: ((a && !b) || (!a && b)) => (a != b) Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09ehea: simplify conditionalNicolas Kaiser
Simplify: ((a && b) || (!a && !b)) => (a == b) Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09r8169: use device model DMA APIStanislaw Gruszka
Use DMA API as PCI equivalents will be deprecated. This change also allow to allocate with GFP_KERNEL where possible. Tested-by: Neal Becker <ndbecker2@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09r8169: allocate with GFP_KERNEL flag when able to sleepStanislaw Gruszka
We have fedora bug report where driver fail to initialize after suspend/resume because of memory allocation errors: https://bugzilla.redhat.com/show_bug.cgi?id=629158 To fix use GFP_KERNEL allocation where possible. Tested-by: Neal Becker <ndbecker2@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: update driver version 5.0.11Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: change all P3 references to P3PSritej Velaga
This patch just rename all P3 #define to P3P. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: fix promiscous mode for VFRajesh Borundia
o Allow promiscous mode setting for VF's depending upon the configuration. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: fix board descriptionSritej Velaga
Remove "Flex-10" from board description. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: remove private LRO flagAmit Kumar Salecha
LRO was not getting enable after interface down/up. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: support quiescent modeAmit Kumar Salecha
Put device in quiescent mode during internal loopback test. Before running test, set state to NEED_QUISCENT. After getting ack from all function, change state to QUISCENT and perform test. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: driver private workqueueAmit Kumar Salecha
Currently fw recovery usage global workqueue. As same workqueue used by kernel for ethtool and etc., supporting quiescent mode is not possible, without driver private workqueue. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-10-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ipw2x00/ipw2200.c
2010-10-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-08sfc: Don't try to set filters with search depths we know won't workBen Hutchings
The filter engine will time-out and ignore filters beyond 200-something hops. We also need to avoid infinite loops in efx_filter_search() when the table is full. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08isdn: strcpy() => strlcpy()Dan Carpenter
setup.phone and setup.eazmsn are 32 character buffers. rcvmsg.msg_data.byte_array is a 48 character buffer. sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn is 50 chars. The rcvmsg struct comes from the memcpy_fromio() in receivemessage(). I guess that means it's data off the wire. I'm not very familiar with this code but I don't see any reason to assume these strings are NULL terminated. Also it's weird that "dn" in a 50 character buffer but we only seem to use 32 characters. In drivers/isdn/sc/scioc.h, "dn" is only a 49 character buffer. So potentially there is still an issue there. The important thing for now is to prevent the memory corruption. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07ath9k_hw: Fix hw reset failure with HTC driverRajkumar Manoharan
The following commit removed DISABLE_REGWRITE_BUFFER ops. The unnecessary REGWRITE_BUFFER_FLUSH was not removed properly which is causing failure on hw reset. Author: Felix Fietkau <nbd@openwrt.org> Date: Tue Oct 5 12:03:42 2010 +0200 ath9k_hw: clean up register write buffering Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07wl1271: Support FEM autodetectionJuuso Oikarinen
In the NVS/INI-parameters for the driver/firmware there is the FEM (front end module) selection option, which may configure the hardware FEM via autodetection or manual selection. So far, there has been support for manual selection only. Add support for FEM autodetection. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-07 00:44:56 +0000