| Age | Commit message (Collapse) | Author |
|---|
|
Pull sparc updates from David Miller:
"Largely this is simply adding support for the Niagara 4 cpu.
Major areas are perf events (chip now supports 4 counters and can
monitor any event on each counter), crypto (opcodes are availble for
sha1, sha256, sha512, md5, crc32c, AES, DES, CAMELLIA, and Kasumi
although the last is unsupported since we lack a generic crypto layer
Kasumi implementation), and an optimized memcpy.
Finally some cleanups by Peter Senna Tschudin."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (47 commits)
sparc64: Fix trailing whitespace in NG4 memcpy.
sparc64: Fix comment type in NG4 copy from user.
sparc64: Add SPARC-T4 optimized memcpy.
drivers/sbus/char: removes unnecessary semicolon
arch/sparc/kernel/pci_sun4v.c: removes unnecessary semicolon
sparc64: Fix function argument comment in camellia_sparc64_key_expand asm.
sparc64: Fix IV handling bug in des_sparc64_cbc_decrypt
sparc64: Add auto-loading mechanism to crypto-opcode drivers.
sparc64: Add missing pr_fmt define to crypto opcode drivers.
sparc64: Adjust crypto priorities.
sparc64: Use cpu_pgsz_mask for linear kernel mapping config.
sparc64: Probe cpu page size support more portably.
sparc64: Support 2GB and 16GB page sizes for kernel linear mappings.
sparc64: Fix bugs in unrolled 256-bit loops.
sparc64: Avoid code duplication in crypto assembler.
sparc64: Unroll CTR crypt loops in AES driver.
sparc64: Unroll ECB decryption loops in AES driver.
sparc64: Unroll ECB encryption loops in AES driver.
sparc64: Add ctr mode support to AES driver.
sparc64: Move AES driver over to a methods based implementation.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace changes from Eric Biederman:
"This is a mostly modest set of changes to enable basic user namespace
support. This allows the code to code to compile with user namespaces
enabled and removes the assumption there is only the initial user
namespace. Everything is converted except for the most complex of the
filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
nfs, ocfs2 and xfs as those patches need a bit more review.
The strategy is to push kuid_t and kgid_t values are far down into
subsystems and filesystems as reasonable. Leaving the make_kuid and
from_kuid operations to happen at the edge of userspace, as the values
come off the disk, and as the values come in from the network.
Letting compile type incompatible compile errors (present when user
namespaces are enabled) guide me to find the issues.
The most tricky areas have been the places where we had an implicit
union of uid and gid values and were storing them in an unsigned int.
Those places were converted into explicit unions. I made certain to
handle those places with simple trivial patches.
Out of that work I discovered we have generic interfaces for storing
quota by projid. I had never heard of the project identifiers before.
Adding full user namespace support for project identifiers accounts
for most of the code size growth in my git tree.
Ultimately there will be work to relax privlige checks from
"capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
root in a user names to do those things that today we only forbid to
non-root users because it will confuse suid root applications.
While I was pushing kuid_t and kgid_t changes deep into the audit code
I made a few other cleanups. I capitalized on the fact we process
netlink messages in the context of the message sender. I removed
usage of NETLINK_CRED, and started directly using current->tty.
Some of these patches have also made it into maintainer trees, with no
problems from identical code from different trees showing up in
linux-next.
After reading through all of this code I feel like I might be able to
win a game of kernel trivial pursuit."
Fix up some fairly trivial conflicts in netfilter uid/git logging code.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
userns: Convert the ufs filesystem to use kuid/kgid where appropriate
userns: Convert the udf filesystem to use kuid/kgid where appropriate
userns: Convert ubifs to use kuid/kgid
userns: Convert squashfs to use kuid/kgid where appropriate
userns: Convert reiserfs to use kuid and kgid where appropriate
userns: Convert jfs to use kuid/kgid where appropriate
userns: Convert jffs2 to use kuid and kgid where appropriate
userns: Convert hpfs to use kuid and kgid where appropriate
userns: Convert btrfs to use kuid/kgid where appropriate
userns: Convert bfs to use kuid/kgid where appropriate
userns: Convert affs to use kuid/kgid wherwe appropriate
userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
userns: On ia64 deal with current_uid and current_gid being kuid and kgid
userns: On ppc convert current_uid from a kuid before printing.
userns: Convert s390 getting uid and gid system calls to use kuid and kgid
userns: Convert s390 hypfs to use kuid and kgid where appropriate
userns: Convert binder ipc to use kuids
userns: Teach security_path_chown to take kuids and kgids
userns: Add user namespace support to IMA
userns: Convert EVM to deal with kuids and kgids in it's hmac computation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- xattr support added. The implementation is shared with tmpfs. The
usage is restricted and intended to be used to manage per-cgroup
metadata by system software. tmpfs changes are routed through this
branch with Hugh's permission.
- cgroup subsystem ID handling simplified.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Define CGROUP_SUBSYS_COUNT according the configuration
cgroup: Assign subsystem IDs during compile time
cgroup: Do not depend on a given order when populating the subsys array
cgroup: Wrap subsystem selection macro
cgroup: Remove CGROUP_BUILTIN_SUBSYS_COUNT
cgroup: net_prio: Do not define task_netpioidx() when not selected
cgroup: net_cls: Do not define task_cls_classid() when not selected
cgroup: net_cls: Move sock_update_classid() declaration to cls_cgroup.h
cgroup: trivial fixes for Documentation/cgroups/cgroups.txt
xattr: mark variable as uninitialized to make both gcc and smatch happy
fs: add missing documentation to simple_xattr functions
cgroup: add documentation on extended attributes usage
cgroup: rename subsys_bits to subsys_mask
cgroup: add xattr support
cgroup: revise how we re-populate root directory
xattr: extract simple_xattr code from tmpfs
|
|
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
|
|
This fixes a local merge conflict resolution done wrong locally in
arm-soc for-next. soc.h was added on a cleanup branch, but the driver
was moved and the header no longer needed.
Signed-off-by: Olof Johansson <olof@lixom.net>
[ .. and I did the same wrong merge, since git automatically does the
whole rename detection etc, so applying this patch from Olof - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc multiplatform enablement from Olof Johansson:
"This is a pretty significant branch. It's the introduction of the
first multiplatform support on ARM, and with this (and the later
branch) merged, it is now possible to build one kernel that contains
support for highbank, vexpress, mvebu, socfpga, and picoxcell. More
platforms will be convered over in the next few releases.
Two critical last things had to be done for this to be practical and
possible:
* Today each platform has its own include directory under
mach-<mach>/include/mach/*, and traditionally that is where a lot
of driver/platform shared definitions have gone, such as platform
data structures. They now need to move out to a common location
instead, and this branch moves a large number of those out to
include/linux/platform_data.
* Each platform used to list the device trees to compile for its
boards in mach-<mach>/Makefile.boot.
Both of the above changes will mean that there are some merge
conflicts to come (and some to resolve here). It's a one-time move
and once it settles in, we should be good for quite a while. Sorry
for the overhead."
Fix conflicts as per Olof.
* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
ARM: add v7 multi-platform defconfig
ARM: msm: Move core.h contents into common.h
ARM: highbank: call highbank_pm_init from .init_machine
ARM: dtb: move all dtb targets to common Makefile
ARM: spear: move platform_data definitions
ARM: samsung: move platform_data definitions
ARM: orion: move platform_data definitions
ARM: vexpress: convert to multi-platform
ARM: initial multiplatform support
ARM: mvebu: move armada-370-xp.h in mach dir
ARM: vexpress: remove dependency on mach/* headers
ARM: picoxcell: remove dependency on mach/* headers
ARM: move all dtb targets out of Makefile.boot
ARM: picoxcell: move debug macros to include/debug
ARM: socfpga: move debug macros to include/debug
ARM: mvebu: move debug macros to include/debug
ARM: vexpress: move debug macros to include/debug
ARM: highbank: move debug macros to include/debug
ARM: move debug macros to common location
ARM: make mach/gpio.h headers optional
...
|
|
Pull ARM soc driver specific changes from Olof Johansson:
- A long-coming conversion of various platforms to a common LED
infrastructure
- AT91 is moved over to use the newer MCI driver for MMC
- Pincontrol conversions for samsung platforms
- DT bindings for gscaler on samsung
- i2c driver fixes for tegra, acked by i2c maintainer
Fix up conflicts as per Olof.
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
drivers: bus: omap_l3: use resources instead of hardcoded irqs
pinctrl: exynos: Fix wakeup IRQ domain registration check
pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
pinctrl: exynos: Correct the detection of wakeup-eint node
pinctrl: exynos: Mark exynos_irq_demux_eint as inline
pinctrl: exynos: Handle only unmasked wakeup interrupts
pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
drivers: bus: Move the OMAP interconnect driver to drivers/bus/
i2c: tegra: dynamically control fast clk
i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
ARM: tegra: clock: remove unused clock entry for i2c
ARM: tegra: clock: add connection name in i2c clock entry
i2c: tegra: pass proper name for getting clock
ARM: tegra: clock: add i2c fast clock entry in clock table
ARM: EXYNOS: Adds G-Scaler device from Device Tree
ARM: EXYNOS: Add clock support for G-Scaler
ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
...
|
|
Pull ARM soc-specific updates, take 2 from Olof Johansson:
"This branch converts the MXS Freescale platform to use irqdomains and
sparse IRQ, in preparation for DT probing and multiplatform kernels."
* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: mxs: remove mach/irqs.h
ARM: mxs: select SPARSE_IRQ
ARM: mxs: adopt irq_domain support for icoll driver
ARM: mxs: select MULTI_IRQ_HANDLER
ARM: mxs: retrieve timer irq from device tree
gpio/mxs: adopt irq_domain support for mxs gpio driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc cleanups, part 2 from Olof Johansson:
"A shorter cleanup branch submitted separately due to dependencies with
some of the previous topics.
Major thing here is that the Broadcom bcmring platform is removed.
It's an SoC that's used on some stationary VoIP platforms, and is in
desperate need of some cleanup. Broadcom came back and suggested that
we just deprecate the platform for now, since they aren't going to
spend the resources needed on cleaning it up, and there are no users
of the platform directly from mainline."
Fix some conflicts due to BCM2835 getting added next to the removed
BCMRING, and removal of tegra files that had been converted to
devicetree.
* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.
ARM: ux500: use __iomem pointers for MMIO
ARM: Remove mach-bcmring
ARM: clps711x: Remove board support for CEIVA
ARM: clps711x: Fix register definitions
ARM: clps711x: Fix lowlevel debug-macro
ARM: clps711x: Added simple clock framework
pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl
ARM: tegra: delete unused headers
ARM: tegra: remove useless includes of <mach/*.h>
ARM: tegra: remove dead code
|
|
Pull ARM soc device tree updates from Olof Johansson:
"Device tree conversion and enablement branch. Mostly a bunch of new
bindings and setup for various platforms, but the Via/Winchip VT8500
platform is also converted over from being 100% legacy to now use
device tree for probing. More of that will come for 3.8."
Trivial conflicts due to removal of vt8500 files, and one documentation
file that was added with slightly different contents both here and in
the USb tree.
* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits)
arm: vt8500: Fixup for missing gpio.h
ARM: LPC32xx: LED fix in PHY3250 DTS file
ARM: dt: mmp-dma: add binding file
arm: vt8500: Update arch-vt8500 to devicetree support.
arm: vt8500: gpio: Devicetree support for arch-vt8500
arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
arm: vt8500: clk: Add Common Clock Framework support
video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
serial: vt8500: Add devicetree support for vt8500-serial
rtc: vt8500: Add devicetree support for vt8500-rtc
arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
ARM: tegra: Add Avionic Design Medcom-Wide support
ARM: tegra: Add Avionic Design Plutux support
ARM: tegra: Add Avionic Design Tamonten support
ARM: tegra: dts: Add pwm label
ARM: ux500: Fix SSP register address format
ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
ARM: ux500: Add all encompassing sound node to the HREF Device Tree
...
|
|
Pull ARM soc-specific updates from Olof Johansson:
"Most notable here is probably the addition of basic support for the
BCM2835, an SoC used in some of the Roku 2 players as well as the
much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
It's still early days on mainline support, with just the basics
working. But it has to start somewhere!
Beyond that there's some conversions of clock infrastructure on tegra
to common clock, misc updates for several other platforms, and OMAP
now has its own bus (under drivers/bus) to manage its devices through.
This branch adds two new directories outside of arch/arm:
drivers/irqchip for new irq controllers, and drivers/bus for the above
OMAP bus. It's expected that some of the other platforms will migrate
parts of their platforms to those directories over time as well."
Fix up trivial conflicts with the clk infrastructure changes.
* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
ARM: shmobile: add new __iomem annotation for new code
ARM: LPC32xx: Support GPI 28
ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
ARM: LPC32xx: Board cleanup
irqchip: fill in empty Kconfig
ARM: SAMSUNG: Add check for NULL in clock interface
ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
ARM: EXYNOS: Add bus clock for FIMD
ARM: SAMSUNG: Fix HDMI related warnings
ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
ARM: EXYNOS: Fix incorrect help text
ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
ARM: bcm2835: instantiate console UART
ARM: bcm2835: add stub clock driver
ARM: bcm2835: add system timer
ARM: bcm2835: add interrupt controller driver
ARM: add infra-structure for BCM2835 and Raspberry Pi
ARM: tegra20: add CPU hotplug support
...
|
|
Pull ARM soc general cleanups from Olof Johansson:
"This is a large branch that contains a handful of different cleanups:
- Fixing up the I/O space remapping on PCI on ARM. This is a series
from Rob Herring that restructures how all pci devices allocate I/O
space, and it's part of the work to allow multiplatform kernels.
- A number of cleanup series for OMAP, moving and removing some
headers, sparse irq rework and in general preparation for
multiplatform.
- Final removal of all non-DT boards for Tegra, it is now
device-tree-only!
- Removal of a stale platform, nxp4008. It's an old mobile chipset
that is no longer in use, and was very likely never really used
with a mainline kernel. We have not been able to find anyone
interested in keeping it around in the kernel.
- Removal of the legacy dmaengine driver on tegra
+ A handful of other things that I haven't described above."
Fix up some conflicts with the staging tree (and because nxp4008 was
removed)
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
ARM: mmp: using for_each_set_bit to simplify the code
ARM: tegra: harmony: fix ldo7 regulator-name
ARM: OMAP2+: Make omap4-keypad.h local
ARM: OMAP2+: Make l4_3xxx.h local
ARM: OMAP2+: Make l4_2xxx.h local
ARM: OMAP2+: Make l3_3xxx.h local
ARM: OMAP2+: Make l3_2xxx.h local
ARM: OMAP1: Move irda.h from plat to mach
ARM: OMAP2+: Make hdq1w.h local
ARM: OMAP2+: Make gpmc-smsc911x.h local
ARM: OMAP2+: Make gpmc-smc91x.h local
ARM: OMAP1: Move flash.h from plat to mach
ARM: OMAP2+: Make debug-devices.h local
ARM: OMAP1: Move board-voiceblue.h from plat to mach
ARM: OMAP1: Move board-sx1.h from plat to mach
ARM: OMAP2+: Make omap-wakeupgen.h local
ARM: OMAP2+: Make omap-secure.h local
ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull non-critical ARM soc bug fixes from Olof Johansson:
"These were submitted as bug fixes before v3.6 but not considered
important enough to be included in it. Some of them cross over to
cleanup territory as well, and aren't strictly bugfixes."
* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
ARM: nomadik: remove NAND_NO_READRDY use
ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()
ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata()
ARM: S3C24XX: removes unnecessary semicolon
ARM: S3C24xx: delete double assignment
ARM: EXYNOS: fix address for EXYNOS4 MDMA1
ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name
ARM: ep93xx: Move ts72xx.h out of include/mach
ARM: ep93xx: use __iomem pointers for MMIO
ARM: msm: Fix early debug uart mapping on some memory configs
ARM: msm: io: Change the default static iomappings to be shared
ARM: msm: io: Remove 7x30 iomap region from 7x00
ARM: msm: Remove call to missing FPGA init on 8660
ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write
ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save
dma: tegra: make data used as *of_device_id.data const
can: mpc5xxx_can: make data used as *of_device_id.data const
macintosh/mediabay: make data used as *of_device_id.data const
i2c/mpc: make data used as *of_device_id.data const
mfd/da9052: make i2c_device_id array const
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers for: MCP3221, ADT7410, MAX197
Chip support added to existing drivers: LM71, LM74, MAX1110, MAX1112,
MAX1113, INA220, INA230, MCP3221
Cleanup: Use devm_ functions, fixed build warnings, removed deprecated
sysfs attributes, code simplifications, dropped dependencies on
EXPERIMENTAL"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits)
hwmon: (mcp3021) Add MCP3221 support
hwmon: (mcp3021) Prepare MCP3021 driver to support other chips
hwmon: (w83791d) Drop unnecessary compare statements
hwmon: (lm93) Drop unnecessary compare statement
hwmon: (lm70) Simplify show_name function
hwmon: (adcxx) Simplify show_name function
hwmon: Drop dependencies on EXPERIMENTAL
hwmon: (it87) Fix Kconfig for IT87 driver
hwmon: (sht15) move header to linux/platform_data/
hwmon: (asus_atk0110) Remove useless kfree
hwmon: (ina2xx) Add support for INA220 and INA230
hwmon: (ina2xx) Use structure array to distinguish chip types
hwmon: (max1111) Add support for MAX1110, MAX1112, and MAX1113
hwmon: (lm70) Add support for LM71 and LM74
hwmon: (Documentation) Update feature-removal-schedule.txt
hwmon: (w83793) Remove legacy chassis intrusion detection sysfs attributes
hwmon: (w83792d) Remove legacy chassis intrusion detection attributes
hwmon: (adm9240) Remove legacy chassis intrusion detection sysfs attribute
hwmon: (lm70) Allow 4wire SPI bus with LM70
hwmon: (sht15) remove multiple driver registration
...
|
|
Pull USB changes from Greg Kroah-Hartman:
"Here is the big USB pull request for 3.7-rc1
There are lots of gadget driver changes (including copying a bunch of
files into the drivers/staging/ccg/ directory so that the other gadget
drivers can be fixed up properly without breaking that driver), and we
remove the old obsolete ub.c driver from the tree.
There are also the usual XHCI set of updates, and other various driver
changes and updates. We also are trying hard to remove the old dbg()
macro, but the final bits of that removal will be coming in through
the networking tree before we can delete it for good.
All of these patches have been in the linux-next tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.
* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
USB: uas: fix gcc warning
USB: uas: fix locking
USB: Fix race condition when removing host controllers
USB: uas: add locking
USB: uas: fix abort
USB: uas: remove aborted field, replace with status bit.
USB: uas: fix task management
USB: uas: keep track of command urbs
xhci: Intel Panther Point BEI quirk.
powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
Revert "usb : Add sysfs files to control port power."
USB: serial: remove vizzini driver
usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
Increase XHCI suspend timeout to 16ms
USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
USB: sierra_ms: don't keep unused variable
fsl/usb: Add support for USB controller version 2.4
USB: qcaux: add Pantech vendor class match
...
|
|
Pull TTY changes from Greg Kroah-Hartman:
"As we skipped the merge window for 3.6-rc1 for the tty tree,
everything is now settled down and working properly, so we are ready
for 3.7-rc1. Here's the patchset, it's big, but the large changes are
removing a firmware file and adding a staging tty driver (it depended
on the tty core changes, so it's going through this tree instead of
the staging tree.)
All of these patches have been in the linux-next tree for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up more-or-less trivial conflicts in
- drivers/char/pcmcia/synclink_cs.c:
tty NULL dereference fix vs tty_port_cts_enabled() helper function
- drivers/staging/{Kconfig,Makefile}:
add-add conflict (dgrp driver added close to other staging drivers)
- drivers/staging/ipack/devices/ipoctal.c:
"split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"
* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
tty/serial: Add kgdb_nmi driver
tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
tty/serial/amba-pl011: Implement poll_init callback
tty/serial/core: Introduce poll_init callback
kdb: Turn KGDB_KDB=n stubs into static inlines
kdb: Implement disable_nmi command
kernel/debug: Mask KGDB NMI upon entry
serial: pl011: handle corruption at high clock speeds
serial: sccnxp: Make 'default' choice in switch last
serial: sccnxp: Remove mask termios caps for SW flow control
serial: sccnxp: Report actual baudrate back to core
serial: samsung: Add poll_get_char & poll_put_char
Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
Powerpc 8xx CPM_UART maxidl should not depend on fifo size
Powerpc 8xx CPM_UART too many interrupts
Powerpc 8xx CPM_UART desynchronisation
serial: set correct baud_base for EXSYS EX-41092 Dual 16950
serial: omap: fix the reciever line error case
8250: blacklist Winbond CIR port
8250_pnp: do pnp probe before legacy probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree update from Greg Kroah-Hartman:
"Here is the big staging tree update for the 3.7-rc1 merge window.
There are a few patches in here that are outside of the staging area,
namely HID and IIO patches, but all of them have been acked by the
relevant subsystem maintainers. The IIO stuff is still coming in
through this tree as it hasn't entirely moved out of the staging tree,
but is almost there.
Other than that, there wa a ton of work on the comedi drivers to make
them more readable and the correct style. Doing that removed a lot of
code, but we added a new driver to the staging tree, so we didn't end
up with a net reduction this time around:
662 files changed, 51649 insertions(+), 26582 deletions(-)
All of these patches have been in the linux-next tree already.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits)
staging: comedi: jr3_pci: fix iomem dereference
staging: comedi: drivers: use comedi_fc.h cmdtest helpers
Staging: winbond: usb_free_urb(NULL) is safe
Staging: winbond: checkpatch cleanup
Staging: winbond: Removed undesired spaces, lines and tabs
Staging: winbond: Typo corrections in comments
Staging: winbond: Changed c99 comments to c89 comments
staging: r8712u: Do not queue cloned skb
staging: comedi: ni_mio_common: always lock in ni_ai_poll()
staging: comedi: s626: add FIXME comment
staging: comedi: s626: don't dereference insn->data
staging: comedi: s526: fix if() check in s526_gpct_winsn()
staging: comedi: s626: cleanup comments in s626_initialize()
staging: comedi: s626: remove clear of kzalloc'ed data
staging: comedi: s626: remove 'WDInterval' from private data
staging: comedi: s626: remove 'ChargeEnabled' from private data
staging: comedi: s626: remove 'IsBoardRevA' comment
staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND"
staging: comedi: s626: remove 'allocatedBuf' from private data
staging: comedi: s626: add final attach message
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core merge from Greg Kroah-Hartman:
"Here is the big driver core update for 3.7-rc1.
A number of firmware_class.c updates (as you saw a month or so ago),
and some hyper-v updates and some printk fixes as well. All patches
that are outside of the drivers/base area have been acked by the
respective maintainers, and have all been in the linux-next tree for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl()
device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit
memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit]
Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt
Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting
Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt
device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit
dev: Add dev_vprintk_emit and dev_printk_emit
netdev_printk/netif_printk: Remove a superfluous logging colon
netdev_printk/dynamic_netdev_dbg: Directly call printk_emit
dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack
driver-core: Shut up dev_dbg_reatelimited() without DEBUG
tools/hv: Parse /etc/os-release
tools/hv: Check for read/write errors
tools/hv: Fix exit() error code
tools/hv: Fix file handle leak
Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO
Tools: hv: Rename the function kvp_get_ip_address()
Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO
Tools: hv: Add an example script to configure an interface
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver merge from Greg Kroah-Hartman:
"Here is the "big" char/misc driver tree update for the 3.7-rc1 merge
window.
Nothing major, just a number of driver updates and fixes, all of which
have been in the linux-next releases for a while now either in my
tree, or in Andrew's (the lis3l driver changes came from his tree last
week).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits)
drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init
drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init
drivers/misc/lis3lv02d: remove lis3lv02d driver DT init
drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code
drivers/misc/lis3lv02d: add generic DT matching code
lis3lv02d: fix some comments specific to lis331dlh driver
MISC: hpilo, remove pci_disable_device
pcmcia: synclink_cs: fix potential tty NULL dereference
drivers/char/mmtimer.c: Remove useless kfree
drivers/char: removes unnecessary semicolon
char/misc: remove CONFIG_EXPERIMENTAL dependencies
mei: don't print buffer as a string
mei: struct mei_message_data doesn't have to be packed
mei: add error messages for open count errors
misc: use module_spi_driver
tifm: use module_pci_driver
misc/at25, dt: Improve at25 SPI eeprom device tree bindings.
mei: add lynx point pci device ids
mei: fix max number of open handles
mei: rename struct pci_dev *mei_device to mei_pdev
...
|
|
Pull clk framework update from Michael Turquette:
"The common clk framework changes for 3.7 are dominated by ARM platform
ports to the framework along with one MIPS port, one MFD port, one
minor framework enhancement and one helper function for platforms
expressing their clock data through device tree."
* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux:
clk: add of_clk_src_onecell_get() support
clk: ux500: Define smp_twd clock for u8500
mfd: dbx500: Provide a more accurate smp_twd clock
clk: ux500: Support for prmcu_rate clock
clk: Provide option for clk_get_rate to issue hw for new rate
clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.
ARM: ux500: Switch to use common clock framework
clk: ux500: Clock definitions for u8500
clk: ux500: First version of clock definitions for ux500
clk: ux500: Adapt PRCMU and PRCC clocks for common clk
clk: versatile: make config option boolean
clk: add Loongson1B clock support
arm: mmp: make all SOCs use common clock by default
clk: mmp: add clock definition for mmp2
clk: mmp: add clock definition for pxa910
clk: mmp: add clock definition for pxa168
clk: mmp: add mmp specific clocks
clk: convert ARM RealView to common clk
clk: prima2: move from arch/arm/mach to drivers/clk
ARM: PRIMA2: convert to common clk and finish full clk tree
|
|
Pull PCI changes from Bjorn Helgaas:
"Host bridge hotplug
- Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi)
- Clear host bridge resource info to avoid issue when releasing
(Yinghai Lu)
- Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu)
- Use standard list ops for acpi_pci_drivers (Jiang Liu)
Device hotplug
- Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang
Liu)
- Remove fakephp driver (Bjorn Helgaas)
- Fix VGA ref count in hotplug remove path (Yinghai Lu)
- Allow acpiphp to handle PCIe ports without native hotplug (Jiang
Liu)
- Implement resume regardless of pciehp_force param (Oliver Neukum)
- Make pci_fixup_irqs() work after init (Thierry Reding)
Miscellaneous
- Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang)
- Factor out PCI Express Capability accessors (Jiang Liu)
- Add pcibios_window_alignment() so powerpc EEH can use generic
resource assignment (Gavin Shan)
- Make pci_error_handlers const (Stephen Hemminger)
- Cleanup drivers/pci/remove.c (Bjorn Helgaas)
- Improve Vendor-Specific Extended Capability support (Bjorn
Helgaas)
- Use standard list ops for bus->devices (Bjorn Helgaas)
- Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang)
- Reassign invalid bus number ranges (Intel DP43BF workaround)
(Yinghai Lu)"
* tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits)
PCI: acpiphp: Handle PCIe ports without native hotplug capability
PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots
PCI/ACPI: Protect acpi_pci_roots list with mutex
PCI/ACPI: Use acpi_pci_root info rather than looking it up again
PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface
PCI/ACPI: Protect acpi_pci_drivers list with mutex
PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges
PCI/ACPI: Use normal list for struct acpi_pci_driver
PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots
PCI: Fix default vga ref_count
ia64/PCI: Clear host bridge aperture struct resource
x86/PCI: Clear host bridge aperture struct resource
PCI: Stop all children first, before removing all children
Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()"
PCI: Provide a default pcibios_update_irq()
PCI: Discard __init annotations for pci_fixup_irqs() and related functions
PCI: Use correct type when freeing bus resource list
PCI: Check P2P bridge for invalid secondary/subordinate range
PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes
xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 support from Catalin Marinas:
"Linux support for the 64-bit ARM architecture (AArch64)
Features currently supported:
- 39-bit address space for user and kernel (each)
- 4KB and 64KB page configurations
- Compat (32-bit) user applications (ARMv7, EABI only)
- Flattened Device Tree (mandated for all AArch64 platforms)
- ARM generic timers"
* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (35 commits)
arm64: ptrace: remove obsolete ptrace request numbers from user headers
arm64: Do not set the SMP/nAMP processor bit
arm64: MAINTAINERS update
arm64: Build infrastructure
arm64: Miscellaneous header files
arm64: Generic timers support
arm64: Loadable modules
arm64: Miscellaneous library functions
arm64: Performance counters support
arm64: Add support for /proc/sys/debug/exception-trace
arm64: Debugging support
arm64: Floating point and SIMD
arm64: 32-bit (compat) applications support
arm64: User access library functions
arm64: Signal handling support
arm64: VDSO support
arm64: System calls handling
arm64: ELF definitions
arm64: SMP support
arm64: DMA mapping API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
"The main new feature is machine support for System zEC12 including
transactional memory, runtime instrumentation, support for scm block
devices via eadm subchannels, and support for CEX4 crypto cards.
In addition there are some nice improvements: bpf jit compiler, arch
backend for cmpxchg_double, relative exception table entries, dasd
partition detection independent from the dasd driver ioctls, and cpu
cache information in /proc/cpuinfo and /sys/device/cpu.
And last but not least a series of cleanup patches from Heiko."
Fix up trivial add-add conflict in arch/s390/Kconfig due to commit
b952741c8079 ("cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING")
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (76 commits)
s390: update defconfig
s390/jump label,nss: let shared kernel support depend on !JUMP_LABEL
s390/disassembler: fix decoding of risblg instruction
s390/bpf,jit: add support for BPF_S_ANC_ALU_XOR_X instruction
s390/traps: move call to print_modules() out of show_regs()
s390/mm: mark free_initrd_mem() as __init
s390/dasd: check count address during online setting
drivers/s390/char/monreader.c: fix error return code
s390/cmpxchg,percpu: implement cmpxchg_double()
s390/percpu: implement this_cpu_add_return()
s390/percpu: implement this_cpu_xchg()
s390/kexec: remove CONFIG_KEXEC
s390/irq: use designated initializers for irq class array
s390: add uninitialized_var() to suppress false positive compiler warnings
s390/crashdump: move fill_cpu_elf_notes() prototype to header file
s390/process: add missing header include
s390/ptrace: add missing ifdef
s390/ipl,decrompressor: disable branch profiling
s390/perf_events: compile only for CONFIG_64BIT
s390/tape: remove even more tape block leftovers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/fpu update from Ingo Molnar:
"The biggest change is the addition of the non-lazy (eager) FPU saving
support model and enabling it on CPUs with optimized xsaveopt/xrstor
FPU state saving instructions.
There are also various Sparse fixes"
Fix up trivial add-add conflict in arch/x86/kernel/traps.c
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kvm: fix kvm's usage of kernel_fpu_begin/end()
x86, fpu: remove cpu_has_xmm check in the fx_finit()
x86, fpu: make eagerfpu= boot param tri-state
x86, fpu: enable eagerfpu by default for xsaveopt
x86, fpu: decouple non-lazy/eager fpu restore from xsave
x86, fpu: use non-lazy fpu restore for processors supporting xsave
lguest, x86: handle guest TS bit for lazy/non-lazy fpu host models
x86, fpu: always use kernel_fpu_begin/end() for in-kernel FPU usage
x86, kvm: use kernel_fpu_begin/end() in kvm_load/put_guest_fpu()
x86, fpu: remove unnecessary user_fpu_end() in save_xstate_sig()
x86, fpu: drop_fpu() before restoring new state from sigframe
x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels
x86, fpu: Consolidate inline asm routines for saving/restoring fpu state
x86, signal: Cleanup ifdefs and is_ia32, is_x32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/EFI changes from Ingo Molnar:
"EFI loader robustness enhancements plus smaller fixes"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Fix the ACPI BGRT driver for images located in EFI boot services memory
efi: Add a function to look up existing IO memory mappings
efi: Defer freeing boot services memory until after ACPI init
x86, EFI: Calculate the EFI framebuffer size instead of trusting the firmware
efifb: Skip DMI checks if the bootloader knows what it's doing
efi: initialize efi.runtime_version to make query_variable_info/update_capsule workable
efi: Build EFI stub with EFI-appropriate options
X86: Improve GOP detection in the EFI boot stub
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf update from Ingo Molnar:
"Lots of changes in this cycle as well, with hundreds of commits from
over 30 contributors. Most of the activity was on the tooling side.
Higher level changes:
- New 'perf kvm' analysis tool, from Xiao Guangrong.
- New 'perf trace' system-wide tracing tool
- uprobes fixes + cleanups from Oleg Nesterov.
- Lots of patches to make perf build on Android out of box, from
Irina Tirdea
- Extend ftrace function tracing utility to be more dynamic for its
users. It allows for data passing to the callback functions, as
well as reading regs as if a breakpoint were to trigger at function
entry.
The main goal of this patch series was to allow kprobes to use
ftrace as an optimized probe point when a probe is placed on an
ftrace nop. With lots of help from Masami Hiramatsu, and going
through lots of iterations, we finally came up with a good
solution.
- Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng.
- Various tracing updates from Steve Rostedt
- Clean up and improve 'perf sched' performance by elliminating lots
of needless calls to libtraceevent.
- Event group parsing support, from Jiri Olsa
- UI/gtk refactorings and improvements from Namhyung Kim
- Add support for non-tracepoint events in perf script python, from
Feng Tang
- Add --symbols to 'script', similar to the one in 'report', from
Feng Tang.
Infrastructure enhancements and fixes:
- Convert the trace builtins to use the growing evsel/evlist
tracepoint infrastructure, removing several open coded constructs
like switch like series of strcmp to dispatch events, etc.
Basically what had already been showcased in 'perf sched'.
- Add evsel constructor for tracepoints, that uses libtraceevent just
to parse the /format events file, use it in a new 'perf test' to
make sure the libtraceevent format parsing regressions can be more
readily caught.
- Some strange errors were happening in some builds, but not on the
next, reported by several people, problem was some parser related
files, generated during the build, didn't had proper make deps, fix
from Eric Sandeen.
- Introduce struct and cache information about the environment where
a perf.data file was captured, from Namhyung Kim.
- Fix handling of unresolved samples when --symbols is used in
'report', from Feng Tang.
- Add union member access support to 'probe', from Hyeoncheol Lee.
- Fixups to die() removal, from Namhyung Kim.
- Render fixes for the TUI, from Namhyung Kim.
- Don't enable annotation in non symbolic view, from Namhyung Kim.
- Fix pipe mode in 'report', from Namhyung Kim.
- Move related stats code from stat to util/, will be used by the
'stat' kvm tool, from Xiao Guangrong.
- Remove die()/exit() calls from several tools.
- Resolve vdso callchains, from Jiri Olsa
- Don't pass const char pointers to basename, so that we can
unconditionally use libgen.h and thus avoid ifdef BIONIC lines,
from David Ahern
- Refactor hist formatting so that it can be reused with the GTK
browser, From Namhyung Kim
- Fix build for another rbtree.c change, from Adrian Hunter.
- Make 'perf diff' command work with evsel hists, from Jiri Olsa.
- Use the only field_sep var that is set up: symbol_conf.field_sep,
fix from Jiri Olsa.
- .gitignore compiled python binaries, from Namhyung Kim.
- Get rid of die() in more libtraceevent places, from Namhyung Kim.
- Rename libtraceevent 'private' struct member to 'priv' so that it
works in C++, from Steven Rostedt
- Remove lots of exit()/die() calls from tools so that the main perf
exit routine can take place, from David Ahern
- Fix x86 build on x86-64, from David Ahern.
- {int,str,rb}list fixes from Suzuki K Poulose
- perf.data header fixes from Namhyung Kim
- Allow user to indicate objdump path, needed in cross environments,
from Maciek Borzecki
- Fix hardware cache event name generation, fix from Jiri Olsa
- Add round trip test for sw, hw and cache event names, catching the
problem Jiri fixed, after Jiri's patch, the test passes
successfully.
- Clean target should do clean for lib/traceevent too, fix from David
Ahern
- Check the right variable for allocation failure, fix from Namhyung
Kim
- Set up evsel->tp_format regardless of evsel->name being set
already, fix from Namhyung Kim
- Oprofile fixes from Robert Richter.
- Remove perf_event_attr needless version inflation, from Jiri Olsa
- Introduce libtraceevent strerror like error reporting facility,
from Namhyung Kim
- Add pmu mappings to perf.data header and use event names from cmd
line, from Robert Richter
- Fix include order for bison/flex-generated C files, from Ben
Hutchings
- Build fixes and documentation corrections from David Ahern
- Assorted cleanups from Robert Richter
- Let O= makes handle relative paths, from Steven Rostedt
- perf script python fixes, from Feng Tang.
- Initial bash completion support, from Frederic Weisbecker
- Allow building without libelf, from Namhyung Kim.
- Support DWARF CFI based unwind to have callchains when %bp based
unwinding is not possible, from Jiri Olsa.
- Symbol resolution fixes, while fixing support PPC64 files with an
.opt ELF section was the end goal, several fixes for code that
handles all architectures and cleanups are included, from Cody
Schafer.
- Assorted fixes for Documentation and build in 32 bit, from Robert
Richter
- Cache the libtraceevent event_format associated to each evsel
early, so that we avoid relookups, i.e. calling pevent_find_event
repeatedly when processing tracepoint events.
[ This is to reduce the surface contact with libtraceevents and
make clear what is that the perf tools needs from that lib: so
far parsing the common and per event fields. ]
- Don't stop the build if the audit libraries are not installed, fix
from Namhyung Kim.
- Fix bfd.h/libbfd detection with recent binutils, from Markus
Trippelsdorf.
- Improve warning message when libunwind devel packages not present,
from Jiri Olsa"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits)
perf trace: Add aliases for some syscalls
perf probe: Print an enum type variable in "enum variable-name" format when showing accessible variables
perf tools: Check libaudit availability for perf-trace builtin
perf hists: Add missing period_* fields when collapsing a hist entry
perf trace: New tool
perf evsel: Export the event_format constructor
perf evsel: Introduce rawptr() method
perf tools: Use perf_evsel__newtp in the event parser
perf evsel: The tracepoint constructor should store sys:name
perf evlist: Introduce set_filter() method
perf evlist: Renane set_filters method to apply_filters
perf test: Add test to check we correctly parse and match syscall open parms
perf evsel: Handle endianity in intval method
perf evsel: Know if byte swap is needed
perf tools: Allow handling a NULL cpu_map as meaning "all cpus"
perf evsel: Improve tracepoint constructor setup
tools lib traceevent: Fix error path on pevent_parse_event
perf test: Fix build failure
trace: Move trace event enable from fs_initcall to core_initcall
tracing: Add an option for disabling markers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
0. 'idle RCU':
Adds RCU APIs that allow non-idle tasks to enter RCU idle mode and
provides x86 code to make use of them, allowing RCU to treat
user-mode execution as an extended quiescent state when the new
RCU_USER_QS kernel configuration parameter is specified. (Work is
in progress to port this to a few other architectures, but is not
part of this series.)
1. A fix for a latent bug that has been in RCU ever since the addition
of CPU stall warnings. This bug results in false-positive stall
warnings, but thus far only on embedded systems with severely
cut-down userspace configurations.
2. Further reductions in latency spikes for huge systems, along with
additional boot-time adaptation to the actual hardware.
This is a large change, as it moves RCU grace-period initialization
and cleanup, along with quiescent-state forcing, from softirq to a
kthread. However, it appears to be in quite good shape (famous
last words).
3. Updates to documentation and rcutorture, the latter category
including keeping statistics on CPU-hotplug latencies and fixing
some initialization-time races.
4. CPU-hotplug fixes and improvements.
5. Idle-loop fixes that were omitted on an earlier submission.
6. Miscellaneous fixes and improvements
In certain RCU configurations new kernel threads will show up (rcu_bh,
rcu_sched), showing RCU processing overhead.
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
rcu: Apply micro-optimization and int/bool fixes to RCU's idle handling
rcu: Userspace RCU extended QS selftest
x86: Exit RCU extended QS on notify resume
x86: Use the new schedule_user API on userspace preemption
rcu: Exit RCU extended QS on user preemption
rcu: Exit RCU extended QS on kernel preemption after irq/exception
x86: Exception hooks for userspace RCU extended QS
x86: Unspaghettize do_general_protection()
x86: Syscall hooks for userspace RCU extended QS
rcu: Switch task's syscall hooks on context switch
rcu: Ignore userspace extended quiescent state by default
rcu: Allow rcu_user_enter()/exit() to nest
rcu: Settle config for userspace extended quiescent state
rcu: Make RCU_FAST_NO_HZ handle adaptive ticks
rcu: New rcu_user_enter_after_irq() and rcu_user_exit_after_irq() APIs
rcu: New rcu_user_enter() and rcu_user_exit() APIs
ia64: Add missing RCU idle APIs on idle loop
xtensa: Add missing RCU idle APIs on idle loop
score: Add missing RCU idle APIs on idle loop
parisc: Add missing RCU idle APIs on idle loop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
1) Patchset from Henrik Rydberg which substantially reduces irqsoff
latency for all input devices. In addition to that, Henrik reworked
multitouch handling in order to reduce runtime memory consumption.
This patchset touches code in Input subsystem as well. All the
changes have been Acked by Dmitry, and we agreed to do it this way
due to inter-dependencies between the patchset and subsequent
changes in HID subsystem.
2) Rework, clenaups and a lot of fixes to picolcd driver by Bruno
Prémont.
3) Core report descriptor handling fix which fixes resume issue on some
devices, by Kevin Daughtridge
4) hidraw fixes by Alexey Khoroshilov and Ratan Nalumasu
5) wiimote driver now supports balance board, by David Herrmann.
6) Other smaller fixes and new device id additions all over the place.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (79 commits)
HID: hidraw: don't deallocate memory when it is in use
HID: picoLCD: optimize for inactive debugfs
HID: multitouch: add support for GeneralTouch multi-touchscreen
HID: Add support for Sony PS3 BD Remote Control
HID: keep dev_rdesc unmodified and use it for comparisons
HID: lg4ff: Minor coding style fixes in lg4ff and hid-lg
HID: hid-lg4ff: Set absolute axes parametes on DFP
HID: hid-lg4ff: Adjust X axis input value accordingly to selected range.
HID: hid-lg4ff: Minor code cleanup to improve readability
HID: ntrig: change default value of logical/physical width/height to 1
HID: picoLCD: bounds check in dump_buff_as_hex()
Input: bcm5974 - Convert to MT-B
Input: bcm5974 - Drop the logical dimensions
Input: bcm5974 - Preparatory renames
Input: bcm5974 - only setup button urb for TYPE1 devices
HID: hid-multitouch: Add Flatfrog support
HID: hid-multitouch: Fix contact count on 3M panels
HID: hid-multitouch: Remove the redundant touch state
HID: hid-multitouch: Simplify setup and frame synchronization
HID: Allow more fields in the hid report
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull the trivial tree from Jiri Kosina:
"Tiny usual fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
doc: fix old config name of kprobetrace
fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
btrfs: fix the commment for the action flags in delayed-ref.h
btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
vfs: fix kerneldoc for generic_fh_to_parent()
treewide: fix comment/printk/variable typos
ipr: fix small coding style issues
doc: fix broken utf8 encoding
nfs: comment fix
platform/x86: fix asus_laptop.wled_type module parameter
mfd: printk/comment fixes
doc: getdelays.c: remember to close() socket on error in create_nl_socket()
doc: aliasing-test: close fd on write error
mmc: fix comment typos
dma: fix comments
spi: fix comment/printk typos in spi
Coccinelle: fix typo in memdup_user.cocci
tmiofb: missing NULL pointer checks
tools: perf: Fix typo in tools/perf
tools/testing: fix comment / output typos
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
- Support for putting regulators into bypass mode where they simply
switch their input to the output (mainly used for low power
retention).
- A new API for setting voltages based on a voltage plus tolerance
rather than an explicit voltage range.
- Lots of cleanups and API updates from Axel Lin.
- New driver for MAX8907.
* tag 'regulator-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (71 commits)
regulator: arizona-ldo: Remove top voltage
regulator: tps6586x: remove regulator-compatible from DT docs
regulator: tps65217.txt: remove regulator-compatible from DT docs
regulator: deprecate regulator-compatible DT property
regulator: fan53555: remove vsel_max not used
regulator: aat2870: Don't explicitly initialise the first field
extcon: arizona: Use bypass mode for MICVDD
regulator: wm831x-ldo: Add bypass support
regulator: arizona-micsupp: Support get/set bypass
regulator: arizona-ldo: Support get/set bypass
regulator: core: Provide regmap get/set bypass operations
regulator: core: Support bypass mode
regulator: Fairchild fan53555 support
regulator: twl: Remove another unused variable warning
regulator: core: Try using the parent device for the default regmap
regulator: core: Fast path non-deferred disables
regulator: core: Report microvolts in sysfs even with only list_voltage()
regulator: tps6586x: add support for SYS rail
regulator: lp872x: remove unnecessary function
regulator: lp872x: fix NULL pointer access problem
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A quiet release for the regmap core, essentially all the activity is
in the shared interrupt controller which is being more and more widely
used and has been enhanced to support a wider range of masking types
and wake handling methods, plus integration with runtime PM for
devices making aggressive use of that."
* tag 'regmap-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: no need primary handler for nested irq
regmap: irq: Add mask invert flag for enable register
mfd: wm8994: Flag the interrupt block as requiring runtime PM be enabled
regmap: irq: Enable devices for runtime PM while handling interrupts
regmap: irq: initialize all irqs to wake disabled
regmap: set MASK_ON_SUSPEND/SKIP_SET_WAKE if no wake_base
regmap: name irq_chip based on regmap_irq_chip's name
regmap: store irq_chip inside regmap_irq_chip_data
regmap: irq: Only update mask bits when doing initial mask
regmap: fix some error messages to take account of irq_reg_stride
regmap: Don't lock in regmap_reinit_cache()
|
|
Conflicts:
drivers/hid/hid-multitouch.c
|
|
Conflicts:
drivers/hid/usbhid/hid-quirks.c
|
|
'uclogic', 'wacom' and 'wiimote' into for-linus
|
|
When a device is unplugged, wait for all processes that have opened the device
to close before deallocating the device.
Signed-off-by: Ratan Nalumasu <ratan@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when
there is an active listener on debugfs for events.
His change got lost while splitting hid_picolcd.c, restore it.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Fix the touch-up no response problem on GeneralTouch twofingers touchscreen and
modify the driver for new GeneralTouch PWT touchscreen.
Signed-off-by: Xianhan Yu <aroundight77@gmail.com>
Reviewed-by Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The Sony PS3 Blue-ray Disc Remote Control used to be supported by the
BlueZ project's user space, but the code that handled it was recently
removed as its functionality conflicted with a real HSP implementation
and the mapping was thought to be better handled in the kernel. This is
a port of the mapping logic from the fakehid driver by Marcel Holtmann
to the in-kernel HID layer.
We also add support for the Logitech Harmony Adapter for PS3, which
emulates the BD Remote.
Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The dev_rdesc member of the hid_device structure is meant to store the original
report descriptor received from the device, but it is currently passed to any
report_fixup method before it is copied to the rdesc member. This patch uses a
temporary buffer to shield dev_rdesc from the side effects of many HID drivers'
report_fixup implementations.
usbhid's hid_post_reset checks the report descriptor currently returned by the
device against a descriptor that may have been modified by a driver's
report_fixup method. That leaves some devices nonfunctional after a resume, with
a "reset_resume error 1" reported. This patch checks the new descriptor against
the unmodified dev_rdesc instead and uses the original, instead of modified,
report size.
BugLink: http://bugs.launchpad.net/bugs/1049623
Signed-off-by: Kevin Daughtridge <kevin@kdau.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The ACPI BGRT driver accesses the BIOS logo image when it initializes.
However, ACPI 5.0 (which introduces the BGRT) recommends putting the
logo image in EFI boot services memory, so that the OS can reclaim that
memory. Production systems follow this recommendation, breaking the
ACPI BGRT driver.
Move the bulk of the BGRT code to run during a new EFI late
initialization phase, which occurs after switching EFI to virtual mode,
and after initializing ACPI, but before freeing boot services memory.
Copy the BIOS logo image to kernel memory at that point, and make it
accessible to the BGRT driver. Rework the existing ACPI BGRT driver to
act as a simple wrapper exposing that image (and the properties from the
BGRT) via sysfs.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/93ce9f823f1c1f3bb88bdd662cce08eee7a17f5d.1348876882.git.josh@joshtriplett.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Two small patches:
* One patch to fix the function declarations for
!CONFIG_IOMMU_API. This is causing build errors
in linux-next and should be fixed for v3.6.
* Another patch to fix an IOMMU group related NULL pointer
dereference."
* tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix wrong assumption in iommu-group specific code
iommu: static inline iommu group stub functions
|
|
Pull NVMe driver fixes from Matthew Wilcox:
"Now that actual hardware has been released (don't have any yet
myself), people are starting to want some of these fixes merged."
Willy doesn't have hardware? Guys...
* git://git.infradead.org/users/willy/linux-nvme:
NVMe: Cancel outstanding IOs on queue deletion
NVMe: Free admin queue memory on initialisation failure
NVMe: Use ida for nvme device instance
NVMe: Fix whitespace damage in nvme_init
NVMe: handle allocation failure in nvme_map_user_pages()
NVMe: Fix uninitialized iod compiler warning
NVMe: Do not set IO queue depth beyond device max
NVMe: Set block queue max sectors
NVMe: use namespace id for nvme_get_features
NVMe: replace nvme_ns with nvme_dev for user admin
NVMe: Fix nvme module init when nvme_major is set
NVMe: Set request queue logical block size
|
|
* cleanup/__iomem:
ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.
ARM: ux500: use __iomem pointers for MMIO
Two new cleanup patches that were not already part of the
first cleanup branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
From "Christian Daudt" <csd@broadcom.com>:
Remove mach-bcmring as this is no longer maintained or used.
Updated the removal with:
- drop the edit to mach-types requested by Russell King
- eliminate defconfig mod from patch 1 requested Olof Johansson
Also switched to using git send-email to avoid word-wrapping
problems
* bcmring/removal:
ARM: Remove mach-bcmring
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Doing a large-scale cleaning and removing the platform in another
branch don't mix well, so do the trivial merge here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Various cleanups for the clps711x platform from
Alexander Shiyan <shc_work@mail.ru> via email:
* clps711x/cleanup:
ARM: clps711x: Remove board support for CEIVA
ARM: clps711x: Fix register definitions
ARM: clps711x: Fix lowlevel debug-macro
ARM: clps711x: Added simple clock framework
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current kernel does not fit in the CEIVA ROM. Also, some functional
has already been removed due migrate from 2.6 to 3.0, and it seems that
no one uses this platform. So, remove support for this board and modules
specific only to this board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
|
|
Sasha Levin has been running trinity in a KVM tools guest, and was able
to trigger the BUG_ON() at arch/x86/mm/pat.c:279 (verifying the range of
the memory type). The call trace showed that it was mtdchar_mmap() that
created an invalid remap_pfn_range().
The problem is that mtdchar_mmap() does various really odd and subtle
things with the vma page offset etc, and uses the wrong types (and the
wrong overflow) detection for it.
For example, the page offset may well be 32-bit on a 32-bit
architecture, but after shifting it up by PAGE_SHIFT, we need to use a
potentially 64-bit resource_size_t to correctly hold the full value.
Also, we need to check that the vma length plus offset doesn't overflow
before we check that it is smaller than the length of the mtdmap region.
This fixes things up and tries to make the code a bit easier to read.
Reported-and-tested-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David S Miller:
1) Netfilter xt_limit module can use uninitialized rules, from Jan
Engelhardt.
2) Wei Yongjun has found several more spots where error pointers were
treated as NULL/non-NULL and vice versa.
3) bnx2x was converted to pci_io{,un}map() but one remaining plain
iounmap() got missed. From Neil Horman.
4) Due to a fence-post type error in initialization of inetpeer entries
(which is where we store the ICMP rate limiting information), we can
erroneously drop ICMPs if the inetpeer was created right around when
jiffies wraps.
Fix from Nicolas Dichtel.
5) smsc75xx resume fix from Steve Glendinnig.
6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut.
7) qlcnic uses msleep() with locks held, fix from Narendra K.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netdev: octeon: fix return value check in octeon_mgmt_init_phy()
inetpeer: fix token initialization
qlcnic: Fix scheduling while atomic bug
bnx2: Clean up remaining iounmap
net: phy: smsc: Implement PHY config_init for LAN87xx
smsc75xx: fix resume after device reset
netdev: pasemi: fix return value check in pasemi_mac_phy_init()
team: fix return value check
l2tp: fix return value check
netfilter: xt_limit: have r->cost != 0 case work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Pull dm fixes from Alasdair G Kergon:
"A few fixes for problems discovered during the 3.6 cycle.
Of particular note, are fixes to the thin target's discard support,
which I hope is finally working correctly; and fixes for multipath
ioctls and device limits when there are no paths."
* tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
dm verity: fix overflow check
dm thin: fix discard support for data devices
dm thin: tidy discard support
dm: retain table limits when swapping to new table with no devices
dm table: clear add_random unless all devices have it set
dm: handle requests beyond end of device instead of using BUG_ON
dm mpath: only retry ioctl when no paths if queue_if_no_path set
dm thin: do not set discard_zeroes_data
|
