summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2013-05-21regulator: core: Correct spelling mistake in commentCharles Keepax
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-21[media] exynos4-is: Fix off-by-one valid range checking for is->config_indexAxel Lin
Current code uses is->config_index as array subscript, thus the valid value range is 0 ... ARRAY_SIZE(cmd) - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] s5c73m3: Fix off-by-one valid range checking for fie->indexAxel Lin
Current code uses fie->index as array subscript, thus the valid value range is 0 ... ARRAY_SIZE(s5c73m3_intervals) - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] s3c-camif: Fix incorrect variable typeSachin Kamat
'rotation' was an 8 bit variable and hence could not have values greater than 255. Since we need higher values, change it to 16 bit type. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] exynos4-is: Fix potential null pointer dereference in mipi-csis.cSachin Kamat
When 'node' is NULL, the print statement tries to dereference it. Hence replace the variable with the one that is accessible. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] vpfe-capture.c: remove unused label probe_free_lockHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] radio-si476x: depend on SND_SOCArnd Bergmann
It is not possible to select SND_SOC_SI476X if we have not also enabled SND_SOC. warning: (RADIO_SI476X) selects SND_SOC_SI476X which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC) Signed-off-by: Arnd Bergmann <arnd@arndb.de> [hans.verkuil@cisco.com: fixed wrong driver name in subject] Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] v4l2: SI476X MFD - Do not use binary constantsGeert Uytterhoeven
Gcc < 4.3 doesn't understand binary constanrs (0b*): drivers/media/radio/radio-si476x.c:862:20: error: invalid suffix "b10000000" on integer constant Hence use a hexadecimal constant (0x*) instead. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] davinci: vpfe: fix error return code in vpfe_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] davinci: vpfe: fix error path in probeLad, Prabhakar
The error path on failure was calling mutex_unlock(), but there was no actuall call before for mutex_lock(). This patch fixes this issue by pointing it to proper go label. Reported-by: Jose Pablo Carballo <jose.carballo@ridgerun.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] media: davinci: vpbe: fix layer availability for NV12 formatLad, Prabhakar
For NV12 format, even if display data is single image, both VIDWIN0 and VIDWIN1 parameters must be used. The start address of Y data plane and C data plane is configured in VIDEOWIN0ADH/L and VIDEOWIN1ADH/L respectively. cuurently only one layer was requested, which is suffice for yuv422, but for yuv420(NV12) two layers are required and fix the same by requesting for other layer if pix fmt is NV12 during set_fmt. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21drm/i915: Propagate errors back from fb set-baseChris Wilson
Along the modesetting short cut where we skip trying to do a full modeset and instead simply update the framebuffer base registers, we failed to handle any errors reported. This regression has been introduced in commit 94352cf9a5328bb1a44288e6c2c1276695f8a356 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jul 5 22:51:56 2012 +0200 drm/i915: push crtc->fb update into pipe_set_base Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-21drm/i915: Adding more reserved PCI IDs for Haswell.Rodrigo Vivi
At DDX commit Chris mentioned the tendency we have of finding out more PCI IDs only when users report. So Let's add all new reserved Haswell IDs. This patch also fix GT3 names. I'no not sending in separated patche because names are only in few comments and not in variable names. v2: Fix some mobile ids (by Paulo) References: http://bugs.freedesktop.org/show_bug.cgi?id=63701 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-21NFC: mei: Do not disable MEI devices from their remove routineSamuel Ortiz
Enabling and disabling device is exclusively handled by the mei_phy_ops. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21NFC: mei_phy: Register event callback when enabling the deviceSamuel Ortiz
The callback registration starts a waiting read, so it needs to be fired everytime the device is enabled. Otherwise following writes will never get an answer back. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21NFC: mei_phy depends on INTEL_MEISamuel Ortiz
INTEL_MEI_BUS_NFC never made it upstream, so make it depend on INTEL_MEI. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21amd64_edac: Fix bogus sysfs file permissionsBorislav Petkov
Fix yet another issue caught by 8f46baaa7ec6c ("base: core: WARN() about bogus permissions on device attributes"). Signed-off-by: Borislav Petkov <bp@suse.de>
2013-05-20clk: tegra: add ac97 controller clockLucas Stach
AC97 controller clock is hardwired to pll_a_out0. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-20clk: tegra: remove USB from clk init tableLucas Stach
The USB clocks are just clock gates, so no need to set a specific clock. In fact trying to set a specific clock is just a NOP if the requested clockrate is the same as those of the parent (clk_m) or will trigger a WARN_ON() if rates don't match up. As we are not setting a specific rate, nor activating the clocks at init, there is no point in keeping the the usb entries in the clock init table. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-20target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmdsJoern Engel
Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-20Merge tag 'stable/for-linus-3.10-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - Regression fix in xen privcmd fixing a memory leak. - Add Documentation for tmem driver. - Simplify and remove code in the tmem driver. - Cleanups. * tag 'stable/for-linus-3.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Fixed assignment error in if statement xen/xenbus: Fixed over 80 character limit issue xen/xenbus: Fixed indentation error in switch case xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off. xen/tmem: Remove the usage of '[no|]selfballoon' and use 'tmem.selfballooning' bool instead. xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. xen/tmem: Remove the boot options and fold them in the tmem.X parameters. xen/tmem: s/disable_// and change the logic. xen/tmem: Fix compile warning. xen/tmem: Split out the different module/boot options. xen/tmem: Move all of the boot and module parameters to the top of the file. xen/tmem: Cleanup. Remove the parts that say temporary. xen/privcmd: fix condition in privcmd_close()
2013-05-20Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This pull request is intended for the 3.10 series. It contains a variety of fixes for problems discovered during the merge window and after 3.10-rc1. For the mac80211 bits, Johannes says the following: "This is what I have: * a patch from Felix to fix RCU usage in his rate table code * a patch from Ilan to add the wdev id to some notifications so they can actually be used by userspace * Sasha Levin found an issue in how hwsim handles devices * a fix for a bug in the wiphy_register() error path that's been there forever * three fixes for WoWLAN * AP mode frame matching was erroneously giving frames to all virtual AP interfaces (reported by Jouni) * a fix for HT handling in my CSA changes, found by Sujith * a fix for some locking simplifications gone wrong * Ben Greear found more cfg80211/mac80211 state confusion * and a fix for another bug found by Jouni: local state changes need to be reported by mac80211 to cfg80211 so it disconnects properly." And for the iwlwifi bits, he says: "I have fixes for a firmware crash during resume, multicast RX, aggregation and a workaround for a firmware scanning bug." Along with those... Albert Pool adds a USB ID to the rtl8192cu driver. Arend van Spriel restores a driver option support flag that had been removed from 3.9 due to a bug in that version of the driver. Felix Fietkau fixes a trio of ath9k issues with a series of small patches. Geert Uytterhoeven provides a Kconfig fix for ath9k (which you also merged, so it isn't in the diff here). Larry Finger gives us a fix for a build warning on big-endian systems for rtlwifi. Rafał Miłecki adds some core IDs to the bcma driver. Sujith Manoharan fixes a module unloading crash in ath9k, and corrects some calibration settings for AR9485. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-208139cp: reset BQL when ring tx ring clearedstephen hemminger
This patch cures transmit timeout's with DHCP observed while running under KVM. When the transmit ring is cleaned out, the Byte Queue Limit values need to be reset. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20drivers: net: usb: rtl8150: concurrent URB bugfixPetko Manolov
This patch fixes a potential race with concurrently running asynchronous write requests. The values for device's RX control register are now stored in dynamically allocated buffers so each URB submission has it's own copy. Doing it the old way is data clobbering prone. This patch is against latest 'net' tree. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20isdn/kcapi: fix a small underflowDan Carpenter
In get_capi_ctr_by_nr() and get_capi_appl_by_nr() the parameter comes from skb->data. The current code can underflow to one space before the start of the array. The sanity check isn't needed in __get_capi_appl_by_nr() but I changed it to match the others. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-05-20TTY: Fix tty miss restart after we turn off flow-controlWang YanQing
I meet emacs hang in start if I do the operation below: 1: echo 3 > /proc/sys/vm/drop_caches 2: emacs BigFile 3: Press CTRL-S follow 2 immediately Then emacs hang on, CTRL-Q can't resume, the terminal hang on, you can do nothing with this terminal except close it. The reason is before emacs takeover control the tty, we use CTRL-S to XOFF it. Then when emacs takeover the control, it may don't use the flow-control, so emacs hang. This patch fix it. This patch will fix a kind of strange tty relation hang problem, I believe I meet it with vim in ssh, and also see below bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465823 Signed-off-by: Wang YanQing <udknight@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20tty/vt: Fix vc_deallocate() lock orderPeter Hurley
Now that the tty port owns the flip buffers and i/o is allowed from the driver even when no tty is attached, the destruction of the tty port (and the flip buffers) must ensure that no outstanding work is pending. Unfortunately, this creates a lock order problem with the console_lock (see attached lockdep report [1] below). For single console deallocation, drop the console_lock prior to port destruction. When multiple console deallocation, defer port destruction until the consoles have been deallocated. tty_port_destroy() is not required if the port has not been used; remove from vc_allocate() failure path. [1] lockdep report from Dave Jones <davej@redhat.com> ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0+ #16 Not tainted ------------------------------------------------------- (agetty)/26163 is trying to acquire lock: blocked: ((&buf->work)){+.+...}, instance: ffff88011c8b0020, at: [<ffffffff81062065>] flush_work+0x5/0x2e0 but task is already holding lock: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [<ffffffff813bc201>] vt_ioctl+0xb61/0x1230 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (console_lock){+.+.+.}: [<ffffffff810b3f74>] lock_acquire+0xa4/0x210 [<ffffffff810416c7>] console_lock+0x77/0x80 [<ffffffff813c3dcd>] con_flush_chars+0x2d/0x50 [<ffffffff813b32b2>] n_tty_receive_buf+0x122/0x14d0 [<ffffffff813b7709>] flush_to_ldisc+0x119/0x170 [<ffffffff81064381>] process_one_work+0x211/0x700 [<ffffffff8106498b>] worker_thread+0x11b/0x3a0 [<ffffffff8106ce5d>] kthread+0xed/0x100 [<ffffffff81601cac>] ret_from_fork+0x7c/0xb0 -> #0 ((&buf->work)){+.+...}: [<ffffffff810b349a>] __lock_acquire+0x193a/0x1c00 [<ffffffff810b3f74>] lock_acquire+0xa4/0x210 [<ffffffff810620ae>] flush_work+0x4e/0x2e0 [<ffffffff81065305>] __cancel_work_timer+0x95/0x130 [<ffffffff810653b0>] cancel_work_sync+0x10/0x20 [<ffffffff813b8212>] tty_port_destroy+0x12/0x20 [<ffffffff813c65e8>] vc_deallocate+0xf8/0x110 [<ffffffff813bc20c>] vt_ioctl+0xb6c/0x1230 [<ffffffff813b01a5>] tty_ioctl+0x285/0xd50 [<ffffffff811ba825>] do_vfs_ioctl+0x305/0x530 [<ffffffff811baad1>] sys_ioctl+0x81/0xa0 [<ffffffff81601d59>] system_call_fastpath+0x16/0x1b other info that might help us debug this: [ 6760.076175] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(console_lock); lock((&buf->work)); lock(console_lock); lock((&buf->work)); *** DEADLOCK *** 1 lock on stack by (agetty)/26163: #0: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [<ffffffff813bc201>] vt_ioctl+0xb61/0x1230 stack backtrace: Pid: 26163, comm: (agetty) Not tainted 3.9.0+ #16 Call Trace: [<ffffffff815edb14>] print_circular_bug+0x200/0x20e [<ffffffff810b349a>] __lock_acquire+0x193a/0x1c00 [<ffffffff8100a269>] ? sched_clock+0x9/0x10 [<ffffffff8100a269>] ? sched_clock+0x9/0x10 [<ffffffff8100a200>] ? native_sched_clock+0x20/0x80 [<ffffffff810b3f74>] lock_acquire+0xa4/0x210 [<ffffffff81062065>] ? flush_work+0x5/0x2e0 [<ffffffff810620ae>] flush_work+0x4e/0x2e0 [<ffffffff81062065>] ? flush_work+0x5/0x2e0 [<ffffffff810b15db>] ? mark_held_locks+0xbb/0x140 [<ffffffff8113c8a3>] ? __free_pages_ok.part.57+0x93/0xc0 [<ffffffff810b15db>] ? mark_held_locks+0xbb/0x140 [<ffffffff810652f2>] ? __cancel_work_timer+0x82/0x130 [<ffffffff81065305>] __cancel_work_timer+0x95/0x130 [<ffffffff810653b0>] cancel_work_sync+0x10/0x20 [<ffffffff813b8212>] tty_port_destroy+0x12/0x20 [<ffffffff813c65e8>] vc_deallocate+0xf8/0x110 [<ffffffff813bc20c>] vt_ioctl+0xb6c/0x1230 [<ffffffff810aec41>] ? lock_release_holdtime.part.30+0xa1/0x170 [<ffffffff813b01a5>] tty_ioctl+0x285/0xd50 [<ffffffff812b00f6>] ? inode_has_perm.isra.46.constprop.61+0x56/0x80 [<ffffffff811ba825>] do_vfs_ioctl+0x305/0x530 [<ffffffff812b04db>] ? selinux_file_ioctl+0x5b/0x110 [<ffffffff811baad1>] sys_ioctl+0x81/0xa0 [<ffffffff81601d59>] system_call_fastpath+0x16/0x1b Cc: Dave Jones <davej@redhat.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20TTY: ehv_bytechan: add missing platform_driver_unregister() when module exitWei Yongjun
We have registered platform driver when module init, and need unregister it when module exit. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20TTY: rocket, fix more no-PCI warningsJiri Slaby
Commit "TTY: rocket, fix compilation warning" fixed a compilation warning, but there was still a problem with !CONFIG_PCI configs. So fix them for good by coupling the PCI functions together and moving them inside a common #ifdef. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20serial: mcf: missing uart_unregister_driver() on error in mcf_init()Wei Yongjun
Add the missing uart_unregister_driver() before return from mcf_init() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20tty: serial: mpc5xxx: fix error handing in mpc52xx_uart_init()Wei Yongjun
Add the missing uart_unregister_driver() and uninit before return from mpc52xx_uart_init() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20serial: samsung: add missing platform_driver_unregister() when module exitWei Yongjun
We have registered platform driver when module init, and need unregister it when module exit. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20serial: pl011: protect attribute read from NULL platform data structLee Jones
It's completely feasible that platform data will be empty i.e. when booting with Device Tree with no device AUXDATA. So we must protect it's use in these use-cases, or risk a kernel Oops. Cc: Russell King <linux@arm.linux.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20tty: nwpserial: Pass correct pointer to free_irq()Lars-Peter Clausen
free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20serial: 8250_dw: Add valid clk pointer checkEzequiel Garcia
Commit ffc3ae6dd "serial: 8250_dw: Enable runtime PM" introduced runtime PM management, which enables/disables the clk without checking if the clk is valid. However, this driver allows to be probed without a defined clk, using clock-frequency, as a fallback. Therefore, on platforms that are device tree probed using clock-frequency instead of clk, we get an ugly NULL pointer dereference. This patch fixes it by simply adding a check before accessing the clk api. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Error path fixes for abituguru and iio_hwmon drivers. - Drop erroneously created attributes from nct6775 driver. - Drop redundant safety on cache lifetime for tmp401 driver. - Add explicit maintainer for LM95234 and TMP401 drivers. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: MAINTAINERS: Add myself as maintainer for LM95234 and TMP401 drivers hwmon: (tmp401) Drop redundant safety on cache lifetime hwmon: fix error return code in abituguru_probe() hwmon: (iio_hwmon) Fix null pointer dereference hwmon: (nct6775) Do not create non-existing attributes hwmon: (iio_hwmon) Fix missing iio_channel_release_all call if devm_kzalloc fail
2013-05-20USB: cxacru: potential underflow in cxacru_cm_get_array()Dan Carpenter
The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20gpio: Don't override the error code in probe error handlingAxel Lin
Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: Denis Turischev <denis@compulab.co.il> Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20xen: Fixed assignment error in if statementLisa Nguyen
Fixed assignment error in if statement in balloon.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-20xen/xenbus: Fixed over 80 character limit issueLisa Nguyen
Fixed the format length of the xenbus_backend_ioctl() function to meet the 80 character limit in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-20xen/xenbus: Fixed indentation error in switch caseLisa Nguyen
Fixed the indentation error in the switch case in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-20gpio: mxs: Use set and clear capabilities of the gpio controllerMaxime Ripard
The current driver doesn't use the set and clear registers found on the mxs gpio controller. This leads the generic gpio controller to be using some internal value to avoid looking up the value stored in the registers, making it behave pretty much like a cache. This raises some coherency problem when a gpio is not modified by the gpio controller, while it can easily be fixed by using the set and clear registers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20gpio-langwell: fix irq conflicts when DT is not usedDavid Cohen
When DT is not used IOAPIC does not register irq domain. As result IOAPIC won't care about gpio-langwell's virq and may cause conflict if an irq number is equal to gpio-langwell's virq mapped beforehand. This patch tells gpio_langwell to not ignore irq_base if != 0 and preferably use it to avoid the conflict. If DT is used, irq_base can safely be 0. Signed-off-by: David Cohen <david.a.cohen@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=mAxel Lin
This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m && CONFIG_GPIO_MCP23S08=y. LD init/built-in.o drivers/built-in.o: In function `mcp23017_write': clkdev.c:(.text+0x1e14): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `mcp23017_read': clkdev.c:(.text+0x1e24): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `mcp23008_write': clkdev.c:(.text+0x1e8c): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `mcp23008_read': clkdev.c:(.text+0x1e98): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23008_read_regs': clkdev.c:(.text+0x1ed0): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23s08_init': clkdev.c:(.init.text+0x30): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mcp23s08_exit': clkdev.c:(.exit.text+0x30): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20spi: topcliff-pch: Pass correct pointer to free_irq()Lars-Peter Clausen
free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-20drm/radeon: add golden register settings for Hainan (v2)Alex Deucher
v2: fix typo Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-05-20drm/radeon: sun/hainan chips do not have UVD (v2)Alex Deucher
Skip UVD handling on them. v2: split has_uvd tracking into separate patch Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-20drm/radeon: track which asics have UVDAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-20drm/radeon: radeon-asic updates for HainanAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 13:52:08 +0000