summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2013-07-18PNP / ACPI: avoid garbage in resource nameLiu ShuoX
Set temporary variable as 0 to avoid garbage string output from /proc/iomem after register resources and reset to PNP dev name later. Signed-off-by: Liu ShuoX <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-18ACPI / video: Always call acpi_video_init_brightness() on initMatthew Garrett
We have to call acpi_video_init_brightness() even if we're not going to initialise the backlight - Thinkpads seem to use this as the trigger for enabling ACPI notifications rather than handling it in firmware. [rjw: Drop the brightness object created by acpi_video_init_brightness() if we are not going to use it.] Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-18ACPICA: expose OSI versionAaron Lu
Expose acpi_gbl_osi_data so that code outside of ACPICA can check the value of the last successfull _OSI call. The definitions for OSI versions are moved to actypes.h so that other components can access them too. Based on a patch from Matthew Garrett which in turn was based on an earlier patch from Seth Forshee. [rjw: Changelog] Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-17drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)Alex Deucher
This allows you to look at the current DPM state via debugfs. Due to the way the hardware works on these asics, there's no way to look up exactly what power state we are in, so we make the best guess we can based on the current sclk. v2: Anthoine's version v3: fix ref div Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-17drm/radeon/dpm/atom: fix broken gcc harderAlex Deucher
See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-17xen-netfront: pull on receive skb may need to happen earlierJan Beulich
Due to commit 3683243b ("xen-netfront: use __pskb_pull_tail to ensure linear area is big enough on RX") xennet_fill_frags() may end up filling MAX_SKB_FRAGS + 1 fragments in a receive skb, and only reduce the fragment count subsequently via __pskb_pull_tail(). That's a result of xennet_get_responses() allowing a maximum of one more slot to be consumed (and intermediately transformed into a fragment) if the head slot has a size less than or equal to RX_COPY_THRESHOLD. Hence we need to adjust xennet_fill_frags() to pull earlier if we reached the maximum fragment count - due to the described behavior of xennet_get_responses() this guarantees that at least the first fragment will get completely consumed, and hence the fragment count reduced. In order to not needlessly call __pskb_pull_tail() twice, make the original call conditional upon the pull target not having been reached yet, and defer the newly added one as much as possible (an alternative would have been to always call the function right before the call to xennet_fill_frags(), but that would imply more frequent cases of needing to call it twice). Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: stable@vger.kernel.org (3.6 onwards) Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-17vxlan: add necessary locking on device removalstephen hemminger
The socket management is now done in workqueue (outside of RTNL) and protected by vn->sock_lock. There were two possible bugs, first the vxlan device was removed from the VNI hash table per socket without holding lock. And there was a race when device is created and the workqueue could run after deletion. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-17drm/radeon/dpm/atom: restructure logic to work around a compiler bugAndre Heider
It seems gcc 4.8.1 generates bogus code for the old logic causing part of the function to get skipped. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-17drm/radeon/dpm: fix atom vram table parsingAlex Deucher
Parsing the table in incorrectly led to problems with certain asics with mclk switching. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-17drm/radeon: fix an endian bug in atom table parsingAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-17drm/radeon: add a module parameter to disable aspmAlex Deucher
Can cause hangs when enabled in certain motherboards. Set radeon.aspm=0 to disable aspm. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-17ath9k_htc: fix data race between request_firmware_nowait() callback and ↵Alexey Khoroshilov
suspend() ath9k_hif_usb_probe() requests firmware asynchronically and there is some initialization postponed till firmware is ready. In particular, ath9k_hif_usb_firmware_cb() callback initializes hif_dev->tx.tx_buf and hif_dev->tx.tx_pending lists. At the same time, ath9k_hif_usb_suspend() iterates that lists through ath9k_hif_usb_dealloc_urbs(). If suspend happens before request_firmware_nowait() callback is called, it can lead to oops. Similar issue could be in ath9k_hif_usb_disconnect(), but it is prevented using hif_dev->fw_done completion and HIF_USB_READY flag. The patch extends this approach to suspend() as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-17ath9k: fix tx pending frames accounting for dropped packetsFelix Fietkau
When dropping packets that have gone far enough into the tx path, the pending frame counter needs to be decreased. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-17rtlwifi: Initialize power-setting callback for USB devicesLarry Finger
Commit a269913c5 entitled "rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue" has two bugs for USB drivers. Firstly, the work queue in question was not initialized. Secondly, the callback routine used by this queue is contained within the file used for PCI devices. As a result, it is not available for architectures without PCI hardware. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Stable <stable@vger.kernel.org> [3.10] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-17drm/rcar-du: Use the GEM PRIME helpersLaurent Pinchart
The GEM CMA PRIME import/export helpers have been removed in favor of generic GEM PRIME helpers with GEM CMA low-level operations. Fix the driver accordingly. Reported-by: Mark Brown <broonie@linaro.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Mark Brown <broonie@linaro.org>
2013-07-17drm/shmobile: Use the GEM PRIME helpersLaurent Pinchart
The GEM CMA PRIME import/export helpers have been removed in favor of generic GEM PRIME helpers with GEM CMA low-level operations. Fix the driver accordingly. Reported-by: Mark Brown <broonie@linaro.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Mark Brown <broonie@linaro.org>
2013-07-17drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off()Chris Wilson
In commit e3de42b68478a8c95dd27520e9adead2af9477a5 Author: Imre Deak <imre.deak@intel.com> Date: Fri May 3 19:44:07 2013 +0200 drm/i915: force full modeset if the connector is in DPMS OFF mode a new function was added that walked over the set of connectors to see if any of the currently associated CRTC was switched off. This function walked an array of connectors, rather than the array of pointers to connectors contained in the drm_mode_set - i.e. it was dereferencing far past the end of the first connector. This only becomes an issue if we attempt to use a clone mode (i.e. more than one connector per CRTC) such that set->num_connectors > 1. Reported-by: Timo Aaltonen <tjaalton@ubuntu.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65927 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-17drm/i915: Sanitize shared dpll stateDaniel Vetter
There seems to be no limit to the amount of gunk the firmware can leave behind. Some platforms leave pch dplls on which are not in active use at all. The example in the bug report is a Apple Macbook Pro. Note that this escape scrunity of the hw state checker until we've tried to use this enabled, but unused pll since we did only check for the inverse case of a in-used, but disabled pll. v2: Add a WARN in the pll state checker which would have caught this case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66952 Reported-and-tested-by: shui yangwei <yangweix.shui@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-17usb: musb: fix resource passed from glue layer to musbKishon Vijay Abraham I
some MUSB incarnations, such as those governed by omap2430.c and tusb6010.c, have three resources, not two. Fix the bug created by commit 09fc7d2 (usb: musb: fix incorrect usage of resource pointer) where only two of the three resources would be passed to musb_core.c [ balbi@ti.com : add tusb6010.c to original patch ] Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-17drm/i915: fix long-standing SNB regression in power consumption after resume v2Konstantin Khlebnikov
This patch fixes regression in power consumtion of sandy bridge gpu, which exists since v3.6 Sometimes after resuming from s2ram gpu starts thinking that it's extremely busy. After that it never reaches rc6 state. Bug exists since kernel v3.6: commit b4ae3f22d238617ca11610b29fde16cf8c0bc6e0 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Jun 14 11:04:48 2012 -0700 drm/i915: load boot context at driver init time For some reason RC6 is already enabled at the beginning of resuming process. Following initliaztion breaks some internal state and confuses RPS engine. This patch disables RC6 at the beginnig of resume and initialization. I've rearranged initialization sequence, because intel_disable_gt_powersave() needs initialized force_wake_get/put and some locks from the dev_priv. Note: The culprit in the initialization sequence seems to be the write to MBCTL added in the above mentioned commit. The first version of this patch just held a forcewake reference across the clock gating init functions, which seems to have been enought to gather quite a few positive test reports. But since that smelled a bit like ad-hoc duct-tape v2 now just disables rps/rc6 across the entire hw setup. References: https://bugs.freedesktop.org/show_bug.cgi?id=54089 References: https://bugzilla.kernel.org/show_bug.cgi?id=58971 References: https://patchwork.kernel.org/patch/2827634/ (patch v1) Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Add note about v1 vs. v2 of this patch and use standard layout for the commit citation. Also add the tested-bys from v1 and a cc: stable.] Cc: stable@vger.kernel.org (Note: tiny conflict due to the addition of the backlight lock in 3.11) Tested-by: Alexander Kaltsas <alexkaltsas@gmail.com> (v1) Tested-by: rocko <rockorequin@hotmail.com> (v1) Tested-by: JohnMB <johnmbryant@sky.com> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-16Drivers: hv: balloon: Do not post pressure status if interruptedK. Y. Srinivasan
When we are posting pressure status, we may get interrupted and handle the un-balloon operation. In this case just don't post the status as we know the pressure status is stale. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16Drivers: hv: balloon: Fix a bug in the hot-add codeK. Y. Srinivasan
As we hot-add 128 MB chunks of memory, we wait to ensure that the memory is onlined before attempting to hot-add the next chunk. If the udev rule for memory hot-add is not executed within the allowed time, we would rollback the state and abort further hot-add. Since the hot-add has succeeded and the only failure is that the memory is not onlined within the allowed time, we should not be rolling back the state. Fix this bug. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Stable <stable@vger.kernel.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16Drivers: hv: vmbus: incorrect device name is printed when child device is ↵Fernando Soto
unregistered Whenever a device is unregistered in vmbus_device_unregister (drivers/hv/vmbus_drv.c), the device name in the log message may contain garbage as the memory has already been freed by the time pr_info is called. Log example: [ 3149.170475] hv_vmbus: child device àõsèè0_5 unregistered By logging the message just before calling device_unregister, the correct device name is printed: [ 3145.034652] hv_vmbus: child device vmbus_0_5 unregistered Also changing register & unregister messages to debug to avoid unnecessarily cluttering the kernel log. Signed-off-by: Fernando M Soto <fsoto@bluecatnetworks.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16hyperv: Fix the NETIF_F_SG flag setting in netvscHaiyang Zhang
SG mode is not currently supported by netvsc, so remove this flag for now. Otherwise, it will be unconditionally enabled by commit ec5f0615642 "Kill link between CSUM and SG features" Previously, the SG feature is disabled because CSUM is not set here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16driver-core: fix new kernel-doc warning in base/platform.cRandy Dunlap
Fix new kernel-doc warning in drivers/base/platform.c: Warning(drivers/base/platform.c:528): No description found for parameter 'owner' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16Merge tag 'iio-fixes-for-3.11a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: The first round of IIO fixes for the 3.11 cycle. This set is larger than I would like, partly due to my lack of review time in the weeks before the merge window and partly because a couple of large drivers and the subsystem as a whole seem to be getting a lot more exposure and testing recently. 1) A long term bug in trigger handling gave a double free of the device. 2) Wrong return value handling means offsets are ignored in iio_convert_raw_to_processed_unlocked. 3) The iio_channel_has_info utility function was incorrectly updated during the recent info_mask split, this is now fixed. 4) mxs-lradc has a couple of little fixes. 5) A couple of missing .driver_module entries meant that drivers could be removed from underneath their users. 6) Error path fixes for ad7303 and lis3l02dq. 7) The scale value for presure in the lps331ap driver was out by a factor of 100.
2013-07-16staging: csr: remove driverGreg Kroah-Hartman
This driver is not being updated as the specifications are not able to be gotten from CSR or anyone else. Without those, getting this driver into proper mergable shape is going to be impossible. So remove the driver from the tree. If the specifications ever become available, this patch can be reverted and the driver fixed up properly. Reported-by: Lidza Louina <lidza.louina@gmail.com> Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com> Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com> Cc: Riku Mettälä <riku.mettala@bluegiga.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16Merge branch 'bcache-for-3.11' of git://evilpiepirate.org/~kent/linux-bcache ↵Jens Axboe
into for-3.11/drivers Kent writes: Hey Jens - I've been busy torture testing and chasing bugs, here's the fruits of my labors. These are all fairly small fixes, some of them quite important.
2013-07-17Merge tag 'drm-intel-fixes-2013-07-11' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel One feature latecomer, I've forgotten to merge the patch to reeanble the Haswell power well feature now that the audio interaction is fixed up. Since that was the only unfixed issue with it I've figured I could throw it in a bit late, and it's trivial to revert in case I'm wrong. Otherwise all bug/regression fixes: - Fix status page reinit after gpu hangs, spotted by more paranoid igt checks. - Fix object list walking fumble regression in the shrinker (only the counting part, the actual shrinking code was correct so no Oops potential), from Xiong Zhang. - Fix DP 1.2 bw limits (Imre). - Restore legacy forcewake on ivb, too many broken biosen out there. We dump a warn though that recent userspace might fall over with that config (Guenter Roeck). - Patch up the gen2 cs tlb w/a. - Improve the fence coherency w/a now that we have a better understanding what's going on. The removed wbinvd+ipi should make -rt folks happy. Big thanks to Jon Bloomfield for figuring this out, patches from Chris. - Fix write-read race when switching ring (Chris). Spotted with code inspection, but now we also have an igt for it. There's an ugly regression we're still working on introduced between 3.10-rc7 and 3.10.0. Unfortunately we can't just revert the offender since that one fixes another regression :( I've asked Steven to include my -fixes branch into linux-next to prevent such fallout in the future, hopefully. * tag 'drm-intel-fixes-2013-07-11' of git://people.freedesktop.org/~danvet/drm-intel: Revert "drm/i915: Workaround incoherence between fences and LLC across multiple CPUs" drm/i915: Fix incoherence with fence updates on Sandybridge+ drm/i915: Fix write-read race with multiple rings Partially revert "drm/i915: unconditionally use mt forcewake on hsw/ivb" drm/i915: fix lane bandwidth capping for DP 1.2 sinks drm/i915: fix up ring cleanup for the i830/i845 CS tlb w/a drm/i915: Correct obj->mm_list link to dev_priv->dev_priv->mm.inactive_list drm/i915: switch disable_power_well default value to 1 drm/i915: reinit status page registers after gpu reset
2013-07-16USB: global suspend and remote wakeup don't mixAlan Stern
The hub driver was recently changed to use "global" suspend for system suspend transitions on non-SuperSpeed buses. This means that we don't suspend devices individually by setting the suspend feature on the upstream hub port; instead devices all go into suspend automatically when the root hub stops transmitting packets. The idea was to save time and to avoid certain kinds of wakeup races. Now it turns out that many hubs are buggy; they don't relay wakeup requests from a downstream port to their upstream port if the downstream port's suspend feature is not set (depending on the speed of the downstream port, whether or not the hub is enabled for remote wakeup, and possibly other factors). We can't have hubs dropping wakeup requests. Therefore this patch goes partway back to the old policy: It sets the suspend feature for a port if the device attached to that port or any of its descendants is enabled for wakeup. People will still be able to benefit from the time savings if they don't care about wakeup and leave it disabled on all their devices. In order to accomplish this, the patch adds a new field to the usb_hub structure: wakeup_enabled_descendants is a count of how many devices below a suspended hub are enabled for remote wakeup. A corresponding new subroutine determines the number of wakeup-enabled devices at or below an arbitrary suspended USB device. This should be applied to the 3.10 stable kernel. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16cpufreq: Revert commit 2f7021a8 to fix CPU hotplug regressionSrivatsa S. Bhat
commit 2f7021a8 "cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work()" caused a regression in CPU hotplug, because it lead to a deadlock between cpufreq governor worker thread and the CPU hotplug writer task. Lockdep splat corresponding to this deadlock is shown below: [ 60.277396] ====================================================== [ 60.277400] [ INFO: possible circular locking dependency detected ] [ 60.277407] 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 Not tainted [ 60.277411] ------------------------------------------------------- [ 60.277417] bash/2225 is trying to acquire lock: [ 60.277422] ((&(&j_cdbs->work)->work)){+.+...}, at: [<ffffffff810621b5>] flush_work+0x5/0x280 [ 60.277444] but task is already holding lock: [ 60.277449] (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60 [ 60.277465] which lock already depends on the new lock. [ 60.277472] the existing dependency chain (in reverse order) is: [ 60.277477] -> #2 (cpu_hotplug.lock){+.+.+.}: [ 60.277490] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277503] [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410 [ 60.277514] [<ffffffff81042cbc>] get_online_cpus+0x3c/0x60 [ 60.277522] [<ffffffff814b842a>] gov_queue_work+0x2a/0xb0 [ 60.277532] [<ffffffff814b7891>] cs_dbs_timer+0xc1/0xe0 [ 60.277543] [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0 [ 60.277552] [<ffffffff81063d31>] worker_thread+0x121/0x3a0 [ 60.277560] [<ffffffff8106ae2b>] kthread+0xdb/0xe0 [ 60.277569] [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0 [ 60.277580] -> #1 (&j_cdbs->timer_mutex){+.+...}: [ 60.277592] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277600] [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410 [ 60.277608] [<ffffffff814b785d>] cs_dbs_timer+0x8d/0xe0 [ 60.277616] [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0 [ 60.277624] [<ffffffff81063d31>] worker_thread+0x121/0x3a0 [ 60.277633] [<ffffffff8106ae2b>] kthread+0xdb/0xe0 [ 60.277640] [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0 [ 60.277649] -> #0 ((&(&j_cdbs->work)->work)){+.+...}: [ 60.277661] [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30 [ 60.277669] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277677] [<ffffffff810621ed>] flush_work+0x3d/0x280 [ 60.277685] [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120 [ 60.277693] [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20 [ 60.277701] [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0 [ 60.277709] [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20 [ 60.277719] [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100 [ 60.277728] [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0 [ 60.277737] [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c [ 60.277747] [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110 [ 60.277759] [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10 [ 60.277768] [<ffffffff815a0a68>] _cpu_down+0x88/0x330 [ 60.277779] [<ffffffff815a0d46>] cpu_down+0x36/0x50 [ 60.277788] [<ffffffff815a2748>] store_online+0x98/0xd0 [ 60.277796] [<ffffffff81452a28>] dev_attr_store+0x18/0x30 [ 60.277806] [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150 [ 60.277818] [<ffffffff8116806d>] vfs_write+0xbd/0x1f0 [ 60.277826] [<ffffffff811686fc>] SyS_write+0x4c/0xa0 [ 60.277834] [<ffffffff815bbbbe>] tracesys+0xd0/0xd5 [ 60.277842] other info that might help us debug this: [ 60.277848] Chain exists of: (&(&j_cdbs->work)->work) --> &j_cdbs->timer_mutex --> cpu_hotplug.lock [ 60.277864] Possible unsafe locking scenario: [ 60.277869] CPU0 CPU1 [ 60.277873] ---- ---- [ 60.277877] lock(cpu_hotplug.lock); [ 60.277885] lock(&j_cdbs->timer_mutex); [ 60.277892] lock(cpu_hotplug.lock); [ 60.277900] lock((&(&j_cdbs->work)->work)); [ 60.277907] *** DEADLOCK *** [ 60.277915] 6 locks held by bash/2225: [ 60.277919] #0: (sb_writers#6){.+.+.+}, at: [<ffffffff81168173>] vfs_write+0x1c3/0x1f0 [ 60.277937] #1: (&buffer->mutex){+.+.+.}, at: [<ffffffff811d9e3c>] sysfs_write_file+0x3c/0x150 [ 60.277954] #2: (s_active#61){.+.+.+}, at: [<ffffffff811d9ec3>] sysfs_write_file+0xc3/0x150 [ 60.277972] #3: (x86_cpu_hotplug_driver_mutex){+.+...}, at: [<ffffffff81024cf7>] cpu_hotplug_driver_lock+0x17/0x20 [ 60.277990] #4: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff815a0d32>] cpu_down+0x22/0x50 [ 60.278007] #5: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60 [ 60.278023] stack backtrace: [ 60.278031] CPU: 3 PID: 2225 Comm: bash Not tainted 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 [ 60.278037] Hardware name: Acer Aspire 5741G /Aspire 5741G , BIOS V1.20 02/08/2011 [ 60.278042] ffffffff8204e110 ffff88014df6b9f8 ffffffff815b3d90 ffff88014df6ba38 [ 60.278055] ffffffff815b0a8d ffff880150ed3f60 ffff880150ed4770 3871c4002c8980b2 [ 60.278068] ffff880150ed4748 ffff880150ed4770 ffff880150ed3f60 ffff88014df6bb00 [ 60.278081] Call Trace: [ 60.278091] [<ffffffff815b3d90>] dump_stack+0x19/0x1b [ 60.278101] [<ffffffff815b0a8d>] print_circular_bug+0x2b6/0x2c5 [ 60.278111] [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30 [ 60.278123] [<ffffffff81067e08>] ? __kernel_text_address+0x58/0x80 [ 60.278134] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.278142] [<ffffffff810621b5>] ? flush_work+0x5/0x280 [ 60.278151] [<ffffffff810621ed>] flush_work+0x3d/0x280 [ 60.278159] [<ffffffff810621b5>] ? flush_work+0x5/0x280 [ 60.278169] [<ffffffff810a9b14>] ? mark_held_locks+0x94/0x140 [ 60.278178] [<ffffffff81062d77>] ? __cancel_work_timer+0x77/0x120 [ 60.278188] [<ffffffff810a9cbd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 60.278196] [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120 [ 60.278206] [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20 [ 60.278214] [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0 [ 60.278225] [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20 [ 60.278234] [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100 [ 60.278244] [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0 [ 60.278255] [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c [ 60.278265] [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110 [ 60.278275] [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10 [ 60.278284] [<ffffffff815a0a68>] _cpu_down+0x88/0x330 [ 60.278292] [<ffffffff81024cf7>] ? cpu_hotplug_driver_lock+0x17/0x20 [ 60.278302] [<ffffffff815a0d46>] cpu_down+0x36/0x50 [ 60.278311] [<ffffffff815a2748>] store_online+0x98/0xd0 [ 60.278320] [<ffffffff81452a28>] dev_attr_store+0x18/0x30 [ 60.278329] [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150 [ 60.278337] [<ffffffff8116806d>] vfs_write+0xbd/0x1f0 [ 60.278347] [<ffffffff81185950>] ? fget_light+0x320/0x4b0 [ 60.278355] [<ffffffff811686fc>] SyS_write+0x4c/0xa0 [ 60.278364] [<ffffffff815bbbbe>] tracesys+0xd0/0xd5 [ 60.280582] smpboot: CPU 1 is now offline The intention of that commit was to avoid warnings during CPU hotplug, which indicated that offline CPUs were getting IPIs from the cpufreq governor's work items. But the real root-cause of that problem was commit a66b2e5 (cpufreq: Preserve sysfs files across suspend/resume) because it totally skipped all the cpufreq callbacks during CPU hotplug in the suspend/resume path, and hence it never actually shut down the cpufreq governor's worker threads during CPU offline in the suspend/resume path. Reflecting back, the reason why we never suspected that commit as the root-cause earlier, was that the original issue was reported with just the halt command and nobody had brought in suspend/resume to the equation. The reason for _that_ in turn, as it turns out, is that earlier halt/shutdown was being done by disabling non-boot CPUs while tasks were frozen, just like suspend/resume.... but commit cf7df378a (reboot: migrate shutdown/reboot to boot cpu) which came somewhere along that very same time changed that logic: shutdown/halt no longer takes CPUs offline. Thus, the test-cases for reproducing the bug were vastly different and thus we went totally off the trail. Overall, it was one hell of a confusion with so many commits affecting each other and also affecting the symptoms of the problems in subtle ways. Finally, now since the original problematic commit (a66b2e5) has been completely reverted, revert this intermediate fix too (2f7021a8), to fix the CPU hotplug deadlock. Phew! Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Peter Wu <lekensteyn@gmail.com> Cc: 3.10+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-16be2net: Fix to avoid hardware workaround when not neededSarveshwar Bandi
Hardware workaround requesting hardware to skip vlan insertion is necessary only when umc or qnq is enabled. Enabling this workaround in other scenarios could cause controller to stall. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16macvtap: do not assume 802.1Q when send vlan packetsJason Wang
The hard-coded 8021.q proto will break 802.1ad traffic. So switch to use vlan->proto. Cc: Basil Gor <basil.gor@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16macvtap: fix the missing ret value of TUNSETQUEUEJason Wang
Commit 441ac0fcaadc76ad09771812382345001dd2b813 (macvtap: Convert to using rtnl lock) forget to return what macvtap_ioctl_set_queue() returns to its caller. This may break multiqueue API by always falling through to TUNGETFEATURES. Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16mlx5 core: Fix __udivdi3 when compiling for 32 bit archesTim Gardner
Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16bgmac: add dependency to phylibHauke Mehrtens
bgmac is using functions from phylib, add the dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16atl1e: unmap partially mapped skb on dma error and free skbNeil Horman
Ben Hutchings pointed out that my recent update to atl1e in commit 352900b583b2852152a1e05ea0e8b579292e731e ("atl1e: fix dma mapping warnings") was missing a bit of code. Specifically it reset the hardware tx ring to its origional state when we hit a dma error, but didn't unmap any exiting mappings from the operation. This patch fixes that up. It also remembers to free the skb in the event that an error occurs, so we don't leak. Untested, as I don't have hardware. I think its pretty straightforward, but please review closely. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16driver core: add default groups to struct classGreg Kroah-Hartman
We should be using groups, not attribute lists, for classes to allow subdirectories, and soon, binary files. Groups are just more flexible overall, so add them. The dev_attrs list will go away after all in-kernel users are converted to use dev_groups. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16driver core: Introduce device_create_groupsGuenter Roeck
device_create_groups lets callers create devices as well as associated sysfs attributes with a single call. This avoids race conditions seen if sysfs attributes on new devices are created later. [fixed up comment block placement and add checks for printk buffer formats - gregkh] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16ata: Fix DVD not dectected at some platform with Wellsburg PCHYouquan Song
There is a patch b55f84e2d527182e7c611d466cd0bb6ddce201de "ata_piix: Fix DVD not dectected at some Haswell platforms" to fix an issue of DVD not recognized on Haswell Desktop platform with Lynx Point. Recently, it is also found the same issue at some platformas with Wellsburg PCH. So deliver a similar patch to fix it by disables 32bit PIO in IDE mode. Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-07-16iwlwifi: mvm: remove extra SSID from probe requestDavid Spinadel
Bits 1-21 in this channel type attributes are indication for which SSID is going to be sent on this channel. Since the first SSID is sent implicitly in the probe request, we don't need to toggle its bit here. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: mvm: fix bug in scan ssidDavid Spinadel
Increment index in each iteration. Without this increment we are overriding the added SSIDs and we will send only the last SSId and (n_ssids - 1) broadcast probes. Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: mvm: refuse connection to APs with BI < 16Johannes Berg
Due to a firmware bug, it crashes when the beacon interval is smaller than 16. Avoid this by refusing the station state change creating the AP station, causing mac80211 to abandon the attempt to connect to the AP, and eventually wpa_s to blacklist it. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: mvm: track the number of Rx BA sessionsEmmanuel Grumbach
The firmware / HW can't support more than 16 Rx BA sessions. Deny any attemps to open more sessions than that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iwlwifi: mvm: fix L2P BA ressources leakEmmanuel Grumbach
We didn't release the Rx AMPDU ressources properly. This bug led to firmware assert after 16 BA sessions. Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iwlwifi: mvm: Fix VIF specific debugfs directory creationAlexander Bondar
Avoid creating VIF specific debugfs directory if already exist. This may happen when, for example, resetting hw, suspend-resume. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iwlwifi: dvm: don't send BT_CONFIG on devices w/o BluetoothJohannes Berg
The BT_CONFIG command that is sent to the device during startup will enable BT coex unless the module parameter turns it off, but on devices without Bluetooth this may cause problems, as reported in Redhat BZ 885407. Fix this by sending the BT_CONFIG command only when the device has Bluetooth. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16s390/qdio: remove unused variableSebastian Ott
Fix a "set but not used" warning found via make W=1. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-16iwlwifi: mvm: unregister leds when registration failedEmmanuel Grumbach
This was missing and prevented any further attempts to load the module. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iio: lps331ap: Fix wrong in_pressure_scale output valueJacek Anaszewski
This patch fixes improper in_pressure_scale output that is returned by the lps331ap barometer sensor driver. According to the documentation the pressure after applying the scale has to be expressed in kilopascal units. With erroneous implementation the scale value larger by two orders of magnitude is returned - 2441410 instead of 24414. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>