summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2010-05-10iwl3945: remove ucode access indirectionJohannes Berg
As these function pointers will always point to the 3945 functions, we can just call them directly and avoid the indirection. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlagn: show and store firmware build numberJohannes Berg
We currently display the build number only if debugging is enabled, but it is really helpful so show it all the time. Also store it so it can be retrieved later via ethtool. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: manage IBSS station properlyJohannes Berg
Currently iwlwifi will eventually exhaust the station table when adding the BSSID station for IBSS mode, unless the interface is set down. The new mac80211 ibss joined/left notification allows us to fix that easily by moving the code to add the IBSS station to the notification, and also adding code to remove it again when we leave the IBSS. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: pass address to iwl_remove_stationJohannes Berg
We'll need that function for IBSS station management, so pass it the address, which is the only thing it uses from the station struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwl3945: use iwl3945_add_bcast_stationJohannes Berg
iwl3945 should not use iwl_add_local_station(..., false) because that would leave the IWL_STA_UCODE_INPROGRESS flag set for the station, which is not desirable. Instead it can use iwl3945_add_bcast_station() here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: make bcast LQ command available for later restore actionsReinette Chatre
When adding the broadcast station the link quality command is generated on demand, sent to device, and disappears. It is thus not available for later cases when we need to restore stations and need to send the link quality command afterwards. Now, when first adding the broadcast station, also generate its link quality command to always be available for later restoring. Also fix an issue when adding local stations where the "in progress" state is never cleared. Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: dump firmware build info in error caseShanyu Zhao
Dump the firmware version and build number in case of firmware SW error. This would help firmware engineer analyze the error log. Requested-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: checking for all the possible failure casesWey-Yi Guy
Multiple error condition require fw/rf reset, driver should check all the possible errors as long as the error checking functions for the devices are available. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: wimax co-exist code clean upWey-Yi Guy
wifi/wimax co-exist command is part of _agn device configuration sequence; move it to iwl-agn-ucode.c which is more appropriate place for the function. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: give correct return information for tx power debugfsWey-Yi Guy
Return -EAGAIN when request tx power information and uCode is not ready; so it will not confuse with tx power information not available. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: use cfg to configure calibration operationWey-Yi Guy
sensitivity calibration and chain noise calibration are not available for all the devices; use .cfg to configure the availability of those calibration functions Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: use .cfg to enable/disable continuous ucode traceWey-Yi Guy
Instead of checking device type for enable/disable continuous ucode trace function; put it in .cfg for better control and more flexibilities. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: remove device type checking for tx power in debugfsWey-Yi Guy
Instead of checking device type for enable/disable tx power control, move it to .cfg for better control and more flexibilities. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: use vif iwl_bss_info_changedJohannes Berg
The iw_mode will always follow the only vif we have, but using the vif directly seems easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: rename "tx_power" to "chain_tx_power"Wey-Yi Guy
The "chain_tx_power" debugfs function is to display the tx power per chain based. Name it "tx_power" is misleading. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: remove powersave debugfs if it is not supportedWey-Yi Guy
For the devices do not have power save support, remove the power save control related debugfs files. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwl3945: fix scan racesAbhijeet Kolekar
Port following patch to 3945. "commit 90c4162ff59a3281b6d2f7206740be6217bd6758 Author: Johannes Berg <johannes.berg@intel.com> Date: Wed Apr 7 00:21:36 2010 -0700 iwlwifi: fix scan races" Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: rename 6000 series Gen2 devices to Gen2aShanyu Zhao
Rename the current 6000 series Gen2 devices to Gen2a. Rename the ucode name prefix to iwlwifi-6000g2a. Also corrected the device IDs for Gen2a series devices. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10Merge branch 'wireless-2.6' into wireless-next-2.6Reinette Chatre
Conflicts: drivers/net/wireless/iwlwifi/iwl-dev.h
2010-05-10iwlagn: wait for asynchronous firmware loadingJohannes Berg
When we kick off a firmware loading process, and then unbind from the pci device right away, we get into trouble. Avoid that by waiting for the firmware loading to finish (whether successfully or not) before the unbind in iwl_pci_remove. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10wireless: depends on NETRandy Dunlap
When CONFIG_NET is disabled, the attempt to build wext-priv.c fails with: net/wireless/wext-priv.c: In function 'ioctl_private_call': net/wireless/wext-priv.c:207: error: implicit declaration of function 'call_commit_handler' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10wireless: rt2x00: rt2800usb: replace X by xXose Vazquez Perez
s/X/x Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Clean up generic procedures on descriptor writing.Gertjan van Wingerde
With a little bit of restructuring it isn't necessary to have special cases in rt2x00queue_write_tx_descriptor for writing the descriptor for beacons. Simply split off the kicking of the TX queue to a separate function with is only called for non-beacons. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Fix beaconing on rt2800.Gertjan van Wingerde
According to the Ralink vendor driver for rt2800 we don't need a full TXD for a beacon but just a TXWI in front of the actual beacon. Fix the rt2800pci and rt2800usb beaconing code accordingly. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: provide beacon's txdesc to write_beacon callback function.Gertjan van Wingerde
Preparation to fix rt2800 beaconing. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Clean up all driver's kick_tx_queue callback functions.Gertjan van Wingerde
All of the driver's kick_tx_queue callback functions treat the TX queue for beacons in a special manner. Clean this up by integrating the kicking of the beacon queue into the write_beacon callback function, and let the generic code no longer call the kick_tx_queue callback function when updating the beacon. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Factor out RXWI processing to common rt2800 code.Gertjan van Wingerde
RXWI processing is exactly the same for rt2800pci and rt2800usb, so make it common code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Factor out TXWI writing to common rt2800 code.Gertjan van Wingerde
TXWI writing is exactly the same for rt2800pci and rt2800usb, so make it common code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Don't check whether hardware crypto is enabled when reading RXD.Gertjan van Wingerde
We should simply follow what the hardware told us it has done. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Clean up rt2800usb.h.Gertjan van Wingerde
Remove unused RXD_DESC_SIZE define and remove duplicated RXWI definitions from rt2800.h. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Fix setting of txdesc->length field.Gertjan van Wingerde
We should take the stripping of the IV into account for the txdesc->length field. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10ath5k: several off by one range checksDan Carpenter
There are several places that use > ARRAY_SIZE() instead of >= ARRAY_SIZE(). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10ath9k/htc_drv_main: off by one errorDan Carpenter
I changed "> ATH9K_HTC_MAX_TID" to ">= ATH9K_HTC_MAX_TID" to avoid a potential overflow. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10ath9k/htc_drv_main: null dereference typoDan Carpenter
This is a stray null dereference. We initialize "ista" properly later on. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10iwlwifi: remove stray mutex_unlock()Dan Carpenter
This mutex_unlock() has been here from the initial commit, but as nearly as I can tell, there isn't a reason for it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10ath9k_hw: enable PCIe low power mode for AR9003Luis R. Rodriguez
Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rtl8180: change PCI DMA mask to DMA_BIT_MASK(32)John W. Linville
From the original report: "I had problems to get my rtl8185 PCI card running on Sparc64: I always got an error about "No suitable DMA available" followed by an error that no device could be detected. When comparing the rtl8180 driver to others I noticed that others are mostly using DMA_BIT_MASK so I changed the custom mask to DMA_BIT_MASK(32) which fixed my issue." Reported-by: Tiziano Müller <tm@dev-zero.ch> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07rt2x00: rt2800: use correct txop value in tx descriptorHelmut Schaa
rt2800 devices use a different enumeration to specify what IFS values should be used on frame transmission compared to the other rt2x00 devices. Hence, create a new enum called txop that contains the valid values. Furthermore use the appropriate txop values as found in the ralink drivers: - TXOP_BACKOFF for management frames - TXOP_SIFS for subsequent fragments in a burst - TXOP_HTTXOP for all data frames Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07wl1271: Reduce PSM entry hang over period from 128 => 1 msJuuso Oikarinen
Currently, we configure a 128ms hang over period for the PSM entry (the firmware will remain active for 128ms after sending the null func for PSM and getting an ack for it.) This is a huge power consumption issue, and appears unnecessary. So, configure the value to 1 ms. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07wl1271: Increase timeout for command event waitingTeemu Paasikivi
Incresed the timeout value for command complete event waiting from 100 ms to 750 ms. In some rare cases it can take about 600 ms before complete event for join command is received. This is most propably caused by the firmware being busy with scanning related activities. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07wl1271: Fix to join and channel number handlingJuuso Oikarinen
This patch changes the way JOIN's are performed, and channel numbers updated. The reason for this is that the firmware JOIN command clears WPA(2) key material, and if done while associated to a WPA(2) secured AP, will render the data-path unusable. While the channel is not usually changed while associated (and currently we could not even support something like that), after performing a scan operation while associated, mac80211 will re-set the current channel to the driver. This caused our problem. Also, the mac80211 is assuming that the driver channel configuration remains persistent over periods of IDLE. Therefore remove channel resetting to zero from the unjoin function. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07wl1271: Fix 32 bit register read related endiannes bugJuuso Oikarinen
Reading single registers did not pay attention to data endianness. This patch fix that. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07wl1271: Add sysfs file to retrieve HW PG-version and ROM-versionJuuso Oikarinen
This patch reads the HW PG version (along with a ROM-version, embedded in the same value) from the wl1271 hardware and publishes the value in a sysfs -file. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07ath9k_htc: Handle IDLE LED properlySujith
Switch LED off/on when handling CONF_CHANGE_IDLE. Not doing this would leave the radio LED on even though the chip would be in full sleep mode. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07ath9k_hw: Update initvals for AR9003 for xb113Luis R. Rodriguez
Generated using the new shiny intivals-tool [1]: initvals -w -f ar9003 > ar9003_initvals.h The respective checksums are: 0x000000005a76829d ar9300_2p0_radio_postamble 0x000000009d90cb74 ar9300Modes_lowest_ob_db_tx_gain_table_2p0 0x00000000e0bc2c84 ar9300Modes_fast_clock_2p0 0x00000000852fca34 ar9300_2p0_radio_core 0x0000000000000000 ar9300Common_rx_gain_table_merlin_2p0 0x0000000078658fb5 ar9300_2p0_mac_postamble 0x0000000023235333 ar9300_2p0_soc_postamble 0x0000000054d41904 ar9200_merlin_2p0_radio_core 0x00000000618455d4 ar9300_2p0_baseband_postamble 0x000000009aa590a4 ar9300_2p0_baseband_core 0x000000004783d946 ar9300Modes_high_power_tx_gain_table_2p0 0x000000006681db44 ar9300Modes_high_ob_db_tx_gain_table_2p0 0x000000001f318700 ar9300Common_rx_gain_table_2p0 0x000000009990cb74 ar9300Modes_low_ob_db_tx_gain_table_2p0 0x00000000c9d66d40 ar9300_2p0_mac_core 0x0000000039139500 ar9300Common_wo_xlna_rx_gain_table_2p0 0x00000000a0c54980 ar9300_2p0_soc_preamble 0x00000000292e2544 ar9300PciePhy_pll_on_clkreq_disable_L1_2p0 0x000000002d3e2544 ar9300PciePhy_clkreq_enable_L1_2p0 0x00000000293e2544 ar9300PciePhy_clkreq_disable_L1_2p0 [1] http://wireless.kernel.org/en/users/Drivers/ath9k_hw/initvals-tool Cc: Tom Hammel <thammel@atheros.com> Cc: Enis Akay <Enis.Akay@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07ath9k_common: drop incomming frames with an invalid hardware rateLuis R. Rodriguez
ath9k_common (used by ath9k and ath9k_htc) trusts the frames blessed by hardware as OK are infact correct even if the rate seen by the driver is unrecognized. ath9k_common just treats these frames in mac80211 as frames as frames under 1 mbps rate. It seems this might not be the best thing to do as other parts of the frame might not be valid so just drop these frames for now. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07ath9k_common: move the rate status setting into ath9k_process_rate()Luis R. Rodriguez
This has no real functional change, this just moves the setting the the mac80211 rate index into ath9k_process_rate(). This allows us to eventually make ath9k_process_rate() return a negative value in case we have detected a specific case rate situation which should have been ignored. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07rtl8180: add software-based support for IBSS modeJohn W. Linville
Device documentation suggests that hardware support for beaconing is available. But I implemented software-based beacon generation as an experiment and it seems better to have that working now rather than waiting for something better to materialize. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07rtl8180: assign sequence numbers in the driverJohn W. Linville
This is a step towards support for beaconing modes of operation. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07rt2x00: Fix RF3052 channel initializationIvo van Doorn
Update channel initialization for the RF3052 chipset. According to the Ralink drivers, the rt3x array must be used for this chipset, rather then the rt2x array. Furthermore RF3052 supports the 5GHz band, extend the rt3x array with the 5GHz channels, and use them for the RF3052 chip. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-23 23:17:47 +0000