summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-31[BNX2]: Fix ASYM PAUSE advertisement for remote PHY.Michael Chan
We were checking for the ASYM_PAUSE bit for 1000Base-X twice instead checking for both the 1000Base-X bit and the 10/100/1000Base-T bit. The purpose of the logic is to tell the firmware that ASYM_PAUSE is set on either the Serdes or Copper interface. Problem was discovered by Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[MACVLAN]: Setting macvlan_handle_frame_hook to NULL when ↵Rami Rosen
rtnl_link_register() fails. In drivers/net/macvlan.c, when rtnl_link_register() fails in macvlan_init_module(), there is no point to set it (second time in this method) to macvlan_handle_frame; macvlan_init_module() will return a negative number, so instead this patch sets macvlan_handle_frame_hook to NULL. Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Update version to 1.7.3.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Update firmware.Michael Chan
Update firmware to support programmable flow control. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Fine-tune flow control on 5709.Michael Chan
Make use of the programmable high/low water marks in 5709 for 802.3 flow control. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Remove CTX_WR macro.Michael Chan
The CTX_WR macro is unnecessary and obfuscates the code. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Remove REG_WR_IND/REG_RD_IND macros.Michael Chan
The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the code. Many callers to these macros read and write shared memory from the bp->shmem_base, so we add 2 similar functions that automatically add the shared memory base. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Refine tx coalescing setup.Michael Chan
Make the tx coalescing setup code independent of the MSIX vector. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Fix 5706 serdes link down bug.Michael Chan
1. Correct the MII expansion serdes control register definition. 2. Check an additional RUDI_INVALID bit when determining 5706S link. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31Add new driver 'rndis_wlan' for wireless RNDIS devices.Jussi Kivilinna
New driver for wireless RNDIS devices. So far only known chip that uses wireless RNDIS is Broadcom 4320. Driver detects all RNDIS devices that have RNDIS wireless physical medium. At least following devices are detected: Buffalo WLI-U2-KG125S U.S. Robotics USR5421 Belkin F5D7051 Linksys WUSB54GSv2 Linksys WUSB54GSC Asus WL169gE Eminent EM4045 BT Voyager 1055 Linksys WUSB54GSv1 U.S. Robotics USR5420 BUFFALO WLI-USB-G54 Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31Move usbnet.h and rndis_host.h to include/linux/usbJussi Kivilinna
Move headers usbnet.h and rndis_host.h to include/linux/usb and fix includes for drivers/net/usb modules. Headers are moved because rndis_wlan will be outside drivers/net/usb in drivers/net/wireless and yet need these headers. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()Jussi Kivilinna
Add RNDIS physical medium checking into generic_rndis_bind() and also make rndis_host to be only bind on every medium except wireless. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rndis_host: Add link_change function pointer to 'struct rndis_data'.Jussi Kivilinna
Callback to signal link state changes from minidriver to 'subminidrivers'. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rndis_host: Add early_init function pointer to 'struct rndis_data'.Jussi Kivilinna
Function pointer is for 'subminidrivers' that need to do work on device right after minidriver has initialized hardware. For example, rndis_wlan setting device specific configuration parameters with OID_GEN_RNDIS_CONFIG_PARAMETER right after rndis_host has initialized hardware with RNDIS_INIT. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31usbnet: add driver_priv pointer to 'struct usbnet'Jussi Kivilinna
Add a private data pointer to usbnet for rndis_wlan module to use. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rndis_host: export functionsJussi Kivilinna
Export rndis_host functions and also rename rndis_bind() to generic_rndis_bind() for modules using rndis_host as base. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rndis_host: Split up rndis_host.cJussi Kivilinna
Split up rndis_host.c into rndis_host.h and rndis_base.c. This is done so that rndis_wlan can reuse common parts with rndis_host. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31usbnet: Use wlan device name for RNDIS wireless devicesJussi Kivilinna
Use wlan device name for RNDIS wireless devices. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Bjorge Dijkstra <bjd@jooz.net> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rndis_host: Fix rndis packet filter flags.Jussi Kivilinna
RNDIS packet filter flags are not exactly the same as CDC flags so we cannot reuse them. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Bjorge Dijkstra <bjd@jooz.net> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rndis_host: Halt device if rndis_bind fails.Jussi Kivilinna
When bind fails after device was initialized, shutdown device properly by sending RNDIS_MSG_HALT. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Bjorge Dijkstra <bjd@jooz.net> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rndis_host: Use 1KB buffer in rndis_unbindJussi Kivilinna
rndis_command requires the caller to pass in a buffer of at least 1KB. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Bjorge Dijkstra <bjd@jooz.net> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31cdc_ether: Hardwire CDC descriptors when missingBjorge Dijkstra
Just as ActiveSync devices, some regular RNDIS devices also lack the CDC descriptors (e.g. devices based on BCM4320 WLAN chip). This patch hardwires the CDC descriptors for all RNDIS style devices when they are missing. Signed-off-by: Bjorge Dijkstra <bjd@jooz.net> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rndis_host: Fix sparse warningBjorge Dijkstra
rndis_unbind and usbnet_cdc_unbind don't return anything. Signed-off-by: Bjorge Dijkstra <bjd@jooz.net> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31Add another Prism2 card to hostapMarcin Juszkiewicz
Card reported by Ångström user: http://bugs.openembedded.net/show_bug.cgi?id=3236 Socket 1: product info: "Wireless LAN", "11Mbps PC Card", "Version 01.02", "" manfid: 0x0156, 0x0002 function: 6 (network) Signed-off-by: Marcin Juszkiewicz <openembedded@haerwu.biz> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31hostap_80211.h: remove duplicate prototypeMichal Piotrowski
There were two identical prototypes for hostap_80211_rx() in drivers/net/wireless/hostap/hostap_80211.h. This patch fixes kernel Bugzilla #8930. Reported by Christoph Burger-Scheidlin. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31wireless: iwlwifi3945/4965 - fix incorrect counting of memoryCyrill Gorcunov
This patch does fix incorrect counting of memory allocated by kmalloc. It seems that could lead to allocated memory overrun and corrupt nearlaid memory area. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31libertas: fix interrupt while removing driverHolger Schurig
Previously I've got an interrupt while removing the driver. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31libertas: fix memory alignment problems on the blackfinIhar Hrachyshka
Fixing unaligned memory access on the blackfin architecture (maybe on the ARM also). Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@promwad.com> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31iwlwifi: correct math in elapsed_jiffiesEric Sandeen
w/o the first change: if end == start you get MAX_JIFFY_OFFSET which isn't what you want... For the latter I think to be technically correct you need the +1 to account for the jiffy between MAX_JIFFY_OFFSET and 0 (hmm w/ the 2nd change the first isn't strictly needed... ah well) Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31b43: Drop packets that we are not able to encryptMichael Buesch
We must not transmit packets we're not able to encrypt. This fixes a bug where in a tiny timeframe after machine resume packets can get sent unencrypted and might leak information. This also fixes three small resource leakages I spotted while fixing the security problem. Properly deallocate the DMA slots in any DMA allocation error path. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31b43: Fix suspend/resumeMichael Buesch
This fixes suspend/resume. We must not overwrite the MAC addresses on resume. Otherwise the card won't ACK any packets anymore. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31iwlwifi: Fix uCode error on associationGregory Greenman
The problem is that priv->assoc_id is set when assoc. resp frame is received. But, when it is set, LQ cmd is still not sent to the uCode, it is done from bg_post_assoc, which is called through a workqueue. On the other hand, when a tx arrives at the moment when this flag is set, but LQ is still not sent, the if condition in tx_skb will not hold and the frame will not be dropped. Thus, it will be sent through which is still not in the sta table in the uCoded. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31iwlwifi: do not schedule tasklet when rcv unused irqJoonwoo Park
The nic controller's scheduler interrupt (CSR_INT_BIT_SCD) indicates to the driver that scheduler finished to transmit the frame/frames. This bit is not used and the tasklet should thus not be scheduled upon its receipt. Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31iwlwifi: cleanup usage of inline functionsReinette Chatre
Be consistent when using inline functions. If the function only used once we move it to where it is used - no need for externs. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31iwlwifi: initialize geo/channel information during probeReinette Chatre
The geo/channel information is obtained from the EEPROM, which is read during probe. We can thus set up channel information at this time. This helps us to support ioctl commands that rely on this before the interface is brought up. Clearly matches _init_channel_map with _free_channel_map and _init_geos with _free_geos to ensure functions calling these routines can also call their cleanup routines. Fixes a few bugs: - if channel information is not available when ioctl commands are issued then we get a NULL pointer oops. Having channel information set up during probe we can deal with ioctl commands without requiring interface to be brought up. This fixes bug: http://www.bughost.org/bugzilla/show_bug.cgi?id=1552 - Fix potential problem if user triggers probe/remove/probe sequence. The value of priv->channel_count was used to determine if channel map is set up. This value was never reset when channel map was removed. - Fix memory leak: priv->modes need to be freed when device removed. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31iwl4965: fix return code indicating one interface is supportedReinette Chatre
This is a fix to patch "iwlwifi: fix iwl_mac_add_interface handler". In that patch the return code was corrected for iwl3945, but not for iwl4965. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Cc: Tomas Carnecky <tom@dbservice.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31iwlwifi: Fix an invalid bitmask test in iwl3945 and iwl4965Maarten Lankhorst
Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rtl8180_dev.c: add support for 1799:700fAdrian Bassett
I have been using the rtl8180 driver via the git kernel route for a while now and would like to suggest that the following local ammendment is included in the development tree in order to support the PCI device 1799:700f. This device is found on the 'Belkin Wireless G Desktop Card' product, model 'F5D7000uk'. From memory, the chip on the card is inscribed RTL8185L; (I don't know the significance of the 'L', I'm afraid). Signed-off-by: Adrian Bassett <adrian.bassett@hotmail.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31b43legacy: fix MAC control and microcode initStefano Brivio
This zeros out all microcode related memory before loading the microcode. This also fixes initialization of the MAC control register. The _only_ place where we overwrite the contents of the MAC control register is at the beginning of b43_chip_init(). All other places must do read() -> mask/set -> write() to not overwrite existing bits. This also adds a longer delay for waiting for the microcode to initialize itself. It seems that the current timeout is sufficient on all available devices, but there's no real reason why we shouldn't wait for up to one second. Slow embedded devices might exist. Better safe than sorry. While at it, fix naming of MACCTL values. This patch by Michael Buesch has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31b43legacy: Fix rfkill allocation leakage in error pathsMichael Buesch
We must kill rfkill in any error paths that trigger after rfkill init. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31b43: Fix rfkill allocation leakage in error pathsMichael Buesch
We must kill rfkill in any error paths that trigger after rfkill init. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31ath5k: debug level improvementsBruno Randolf
* use only one debug level for beacon debugging: unify ATH5K_DEBUG_BEACON and ATH5K_DEBUG_BEACON_PROC. * remove debug level ATH5K_DEBUG_FATAL. doesn't make sense as a debug level - if it's fatal it should be logged as an error. * fancier printing of debug levels. cat /debugfs/ath5k/phy0/debug. * allow debug levels to be changed by echoing their name into /debugfs/ath5k/phy0/debug. this will toggle the state, when it was off it will be turned on and vice versa. * use copy_from_user() when reading from the debug files. use unsigned int for better optimization. reduce buffer sizes on stack. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/debug.c: Changes-licensed-under: GPL drivers/net/wireless/ath5k/debug.h: Changes-licensed-under: GPL Signed-off-by: Bruno Randolf <bruno@thinktube.com> Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31rt61pci: fix-up merge damageJohn W. Linville
A subtle merge error was introduced after re-queueing a patch for 2.6.24 instead of 2.6.25... Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-01Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (299 commits) [ALSA] version 1.0.16rc2 [ALSA] hda: fix Mic in as output [ALSA] emu10k1 - Another EMU0404 Board ID [ALSA] emu10k1 - Fix kthread handling at resume [ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304. [ALSA] emu10k1 - Use enum for emu_model types [ALSA] emu10k1 - Don't create emu1010 controls for non-emu boards [ALSA] emu10k1 - 1616(M) cardbus improvements [ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404. [ALSA] emu10k1: Add comments regarding E-Mu ins and outs. [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785 [ALSA] es1938 - improve capture hw pointer reads [ALSA] HDA-Intel - Add support for Intel SCH [ALSA] hda: Add GPIO mute support to STAC9205 [ALSA] hda-codec - Add Dell T3400 support [ALSA] hda-codec - Add model for HP DV9553EG laptop [ALSA] hda-codec - Control SPDIF as slave [ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID's [ALSA] Fix Oops with PCM OSS sync [ALSA] hda-codec - Add speaker automute to ALC262 HP models ...
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31lguest: fix mis-merge against hpa's TSS renamingRusty Russell
drivers/lguest/x86/core.c: In function ‘copy_in_guest_info’: drivers/lguest/x86/core.c:97: error: ‘struct x86_hw_tss’ has no member named ‘esp1’ Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31Merge branch 'for-2.6.25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits) [POWERPC] Cell IOMMU fixed mapping support [POWERPC] Split out the ioid fetching/checking logic [POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows [POWERPC] Split out the IOMMU logic from cell_dma_dev_setup() [POWERPC] Split cell_iommu_setup_hardware() into two parts [POWERPC] Split out the logic that allocates struct iommus [POWERPC] Allocate the hash table under 1G on cell [POWERPC] Add set_dma_ops() to match get_dma_ops() [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format. [POWERPC] 85xx: Only invalidate TLB0 and TLB1 [POWERPC] 83xx: Fix typo in mpc837x compatible entries [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall [POWERPC] 83xx: rework platform Kconfig [POWERPC] 85xx: rework platform Kconfig [POWERPC] 86xx: Remove unused IRQ defines [POWERPC] QE: Explicitly set address-cells and size cells for muram [POWERPC] Convert StorCenter DTS file to /dts-v1/ format. [POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format. [PPC] Remove 85xx from arch/ppc [PPC] Remove 83xx from arch/ppc ...
2008-01-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (26 commits) firewire: fw-sbp2: Use sbp2 device-provided mgt orb timeout for logins firewire: fw-sbp2: increase login orb reply timeout, fix "failed to login" firewire: replace subtraction with bitwise and firewire: fw-core: react on bus resets while the config ROM is being fetched firewire: enforce access order between generation and node ID, fix "giving up on config rom" firewire: fw-cdev: use device generation, not card generation firewire: fw-sbp2: use device generation, not card generation firewire: fw-sbp2: try to increase reconnect_hold (speed up reconnection) firewire: fw-sbp2: skip unnecessary logout firewire vs. ieee1394: clarify MAINTAINERS firewire: fw-ohci: Dynamically allocate buffers for DMA descriptors firewire: fw-ohci: CycleTooLong interrupt management firewire: Fix extraction of source node id firewire: fw-ohci: Bug fixes for packet-per-buffer support firewire: fw-ohci: Fix for dualbuffer three-or-more buffers firewire: fw-sbp2: remove unused misleading macro firewire: fw-sbp2: prepare for s/g chaining firewire: fw-sbp2: refactor workq and kref handling ieee1394: ohci1394: don't schedule IT tasklets on IR events ieee1394: sbp2: raise default transfer size limit ...
2008-01-31Merge branch 'linux-2.6'Paul Mackerras
2008-01-31Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xxPaul Mackerras
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 12:36:07 +0000