summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2014-01-21drivers/block/paride/pg.c: underflow bug in pg_write()Dan Carpenter
The test here can underflow so we pass bogus lengths to the hardware. It's a static checker fix and I don't know the impact. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2014-01-21drivers/block/sx8.c: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2014-01-21drivers/block/sx8.c: use module_pci_driver()Jingoo Han
Use module_pci_driver() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2014-01-21Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge first patch-bomb from Andrew Morton: - a couple of misc things - inotify/fsnotify work from Jan - ocfs2 updates (partial) - about half of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits) mm/migrate: remove unused function, fail_migrate_page() mm/migrate: remove putback_lru_pages, fix comment on putback_movable_pages mm/migrate: correct failure handling if !hugepage_migration_support() mm/migrate: add comment about permanent failure path mm, page_alloc: warn for non-blockable __GFP_NOFAIL allocation failure mm: compaction: reset scanner positions immediately when they meet mm: compaction: do not mark unmovable pageblocks as skipped in async compaction mm: compaction: detect when scanners meet in isolate_freepages mm: compaction: reset cached scanner pfn's before reading them mm: compaction: encapsulate defer reset logic mm: compaction: trace compaction begin and end memcg, oom: lock mem_cgroup_print_oom_info sched: add tracepoints related to NUMA task migration mm: numa: do not automatically migrate KSM pages mm: numa: trace tasks that fail migration due to rate limiting mm: numa: limit scope of lock for NUMA migrate rate limiting mm: numa: make NUMA-migrate related functions static lib/show_mem.c: show num_poisoned_pages when oom mm/hwpoison: add '#' to hwpoison_inject mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter ...
2014-01-21Merge branch 'for-3.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Support for some new embedded controllers. A couple late (<= a week) fixes have stable cc'd and one patch ("SATA: MV: Add support for the optional PHYs") got committed yesterday because otherwise the resulting kernel would fail boot on an embedded board due to interdependent changes in its platform tree. Other than that, nothing too noteworthy" * 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: SATA: MV: Add support for the optional PHYs sata-highbank: Remove unnecessary ahci_platform.h include libata: disable LPM for some WD SATA-I devices ARM: mvebu: update the SATA compatible string for Armada 370/XP ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs ata: sata_mv: introduce compatible string "marvell, armada-370-sata" ata: pata_samsung_cf: Remove unused macros ata: pata_samsung_cf: Use devm_ioremap_resource() ata: pata_samsung_cf: Merge pata_samsung_cf.h into pata_samsung_cf.c ata: pata_samsung_cf: Move plat/regs-ata.h to drivers/ata drivers: ata: Mark the function as static in libahci.c drivers: ata: Mark the function ahci_init_interrupts() as static in ahci.c ahci: imx: fix the error handling in imx_ahci_probe() ahci: imx: ahci_imx_softreset() can be static ahci: imx: Add i.MX53 support ahci: imx: Pull out the clock enable/disable calls libata, dt: Document sata_rcar bindings sata_rcar: Add R-Car Gen2 SATA PHY support ahci: mcp89: enter AHCI mode under Apple BIOS emulation ata: libata-eh: Remove unnecessary snprintf arithmetic
2014-01-21net: Add GRO support for vxlan trafficOr Gerlitz
Add GRO handlers for vxlann, by using the UDP GRO infrastructure. For single TCP session that goes through vxlan tunneling I got nice improvement from 6.8Gbs to 11.5Gbs --> UDP/VXLAN GRO disabled $ netperf -H 192.168.52.147 -c -C $ netperf -t TCP_STREAM -H 192.168.52.147 -c -C MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.52.147 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 65536 65536 10.00 6799.75 12.54 24.79 0.604 1.195 --> UDP/VXLAN GRO enabled $ netperf -t TCP_STREAM -H 192.168.52.147 -c -C MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.52.147 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 65536 65536 10.00 11562.72 24.90 20.34 0.706 0.577 Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21Merge branch 'for-3.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "The bulk of changes are cleanups and preparations for the upcoming kernfs conversion. - cgroup_event mechanism which is and will be used only by memcg is moved to memcg. - pidlist handling is updated so that it can be served by seq_file. Also, the list is not sorted if sane_behavior. cgroup documentation explicitly states that the file is not sorted but it has been for quite some time. - All cgroup file handling now happens on top of seq_file. This is to prepare for kernfs conversion. In addition, all operations are restructured so that they map 1-1 to kernfs operations. - Other cleanups and low-pri fixes" * 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (40 commits) cgroup: trivial style updates cgroup: remove stray references to css_id doc: cgroups: Fix typo in doc/cgroups cgroup: fix fail path in cgroup_load_subsys() cgroup: fix missing unlock on error in cgroup_load_subsys() cgroup: remove for_each_root_subsys() cgroup: implement for_each_css() cgroup: factor out cgroup_subsys_state creation into create_css() cgroup: combine css handling loops in cgroup_create() cgroup: reorder operations in cgroup_create() cgroup: make for_each_subsys() useable under cgroup_root_mutex cgroup: css iterations and css_from_dir() are safe under cgroup_mutex cgroup: unify pidlist and other file handling cgroup: replace cftype->read_seq_string() with cftype->seq_show() cgroup: attach cgroup_open_file to all cgroup files cgroup: generalize cgroup_pidlist_open_file cgroup: unify read path so that seq_file is always used cgroup: unify cgroup_write_X64() and cgroup_write_string() cgroup: remove cftype->read(), ->read_map() and ->write() hugetlb_cgroup: convert away from cftype->read() ...
2014-01-21stmmac: Fix kernel crashes for jumbo framesVince Bridgers
These changes correct the following issues with jumbo frames on the stmmac driver: 1) The Synopsys EMAC can be configured to support different FIFO sizes at core configuration time. There's no way to query the controller and know the FIFO size, so the driver needs to get this information from the device tree in order to know how to correctly handle MTU changes and setting up dma buffers. The default max-frame-size is as currently used, which is the size of a jumbo frame. 2) The driver was enabling Jumbo frames by default, but was not allocating dma buffers of sufficient size to handle the maximum possible packet size that could be received. This led to memory corruption since DMAs were occurring beyond the extent of the allocated receive buffers for certain types of network traffic. kernel BUG at net/core/skbuff.c:126! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: CPU: 0 PID: 563 Comm: sockperf Not tainted 3.13.0-rc6-01523-gf7111b9 #31 task: ef35e580 ti: ef252000 task.ti: ef252000 PC is at skb_panic+0x60/0x64 LR is at skb_panic+0x60/0x64 pc : [<c03c7c3c>] lr : [<c03c7c3c>] psr: 60000113 sp : ef253c18 ip : 60000113 fp : 00000000 r10: ef3a5400 r9 : 00000ebc r8 : ef3a546c r7 : ee59f000 r6 : ee59f084 r5 : ee59ff40 r4 : ee59f140 r3 : 000003e2 r2 : 00000007 r1 : c0b9c420 r0 : 0000007d Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 2e8ac04a DAC: 00000015 Process sockperf (pid: 563, stack limit = 0xef252248) Stack: (0xef253c18 to 0xef254000) 3c00: 00000ebc ee59f000 3c20: ee59f084 ee59ff40 ee59f140 c04a9cd8 ee8c50c0 00000ebc ee59ff40 00000000 3c40: ee59f140 c02d0ef0 00000056 ef1eda80 ee8c50c0 00000ebc 22bbef29 c0318f8c 3c60: 00000056 ef3a547c ffe2c716 c02c9c90 c0ba1298 ef3a5838 ef3a5838 ef3a5400 3c80: 000020c0 ee573840 000055cb ef3f2050 c053f0e0 c0319214 22b9b085 22d92813 3ca0: 00001c80 004b8e00 ef3a5400 ee573840 ef3f2064 22d92813 ef3f2064 000055cb 3cc0: ef3f2050 c031a19c ef252000 00000000 00000000 c0561bc0 00000000 ff00ffff 3ce0: c05621c0 ef3a5400 ef3f2064 ee573840 00000020 ef3f2064 000055cb ef3f2050 3d00: c053f0e0 c031cad0 c053e740 00000e60 00000000 00000000 ee573840 ef3a5400 3d20: ef0a6e00 00000000 ef3f2064 c032507c 00010000 00000020 c0561bc0 c0561bc0 3d40: ee599850 c032799c 00000000 ee573840 c055a380 ef3a5400 00000000 ef3f2064 3d60: ef3f2050 c032799c 0101c7c0 2b6755cb c059a280 c030e4d8 000055cb ffffffff 3d80: ee574fc0 c055a380 ee574000 ee573840 00002b67 ee573840 c03fe9c4 c053fa68 3da0: c055a380 00001f6f 00000000 ee573840 c053f0e0 c0304fdc ef0a6e01 ef3f2050 3dc0: ee573858 ef031000 ee573840 c03055d8 c0ba0c40 ef000f40 00100100 c053f0dc 3de0: c053ffdc c053f0f0 00000008 00000000 ef031000 c02da948 00001140 00000000 3e00: c0563c78 ef253e5f 00000020 ee573840 00000020 c053f0f0 ef313400 ee573840 3e20: c053f0e0 00000000 00000000 c05380c0 ef313400 00001000 00000015 c02df280 3e40: ee574000 ef001e00 00000000 00001080 00000042 005cd980 ef031500 ef031500 3e60: 00000000 c02df824 ef031500 c053e390 c0541084 f00b1e00 c05925e8 c02df864 3e80: 00001f5c ef031440 c053e390 c0278524 00000002 00000000 c0b9eb48 c02df280 3ea0: ee8c7180 00000100 c0542ca8 00000015 00000040 ef031500 ef031500 ef031500 3ec0: c027803c ef252000 00000040 000000ec c05380c0 c0b9eb40 c0b9eb48 c02df940 3ee0: ef060780 ffffa4dd c0564a9c c056343c 002e80a8 00000080 ef031500 00000001 3f00: c053808c ef252000 fffec100 00000003 00000004 002e80a8 0000000c c00258f0 3f20: 002e80a8 c005e704 00000005 00000100 c05634d0 c0538080 c05333e0 00000000 3f40: 0000000a c0565580 c05380c0 ffffa4dc c05434f4 00400100 00000004 c0534cd4 3f60: 00000098 00000000 fffec100 002e80a8 00000004 002e80a8 002a20e0 c0025da8 3f80: c0534cd4 c000f020 fffec10c c053ea60 ef253fb0 c0008530 0000ffe2 b6ef67f4 3fa0: 40000010 ffffffff 00000124 c0012f3c 0000ffe2 002e80f0 0000ffe2 00004000 3fc0: becb6338 becb6334 00000004 00000124 002e80a8 00000004 002e80a8 002a20e0 3fe0: becb6300 becb62f4 002773bb b6ef67f4 40000010 ffffffff 00000000 00000000 [<c03c7c3c>] (skb_panic+0x60/0x64) from [<c02d0ef0>] (skb_put+0x4c/0x50) [<c02d0ef0>] (skb_put+0x4c/0x50) from [<c0318f8c>] (tcp_collapse+0x314/0x3ec) [<c0318f8c>] (tcp_collapse+0x314/0x3ec) from [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) from [<c031a19c>] (tcp_data_queue+0x480/0xe6c) [<c031a19c>] (tcp_data_queue+0x480/0xe6c) from [<c031cad0>] (tcp_rcv_established+0x180/0x62c) [<c031cad0>] (tcp_rcv_established+0x180/0x62c) from [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) from [<c032799c>] (tcp_v4_rcv+0x718/0x73c) [<c032799c>] (tcp_v4_rcv+0x718/0x73c) from [<c0304fdc>] (ip_local_deliver+0x98/0x274) [<c0304fdc>] (ip_local_deliver+0x98/0x274) from [<c03055d8>] (ip_rcv+0x420/0x758) [<c03055d8>] (ip_rcv+0x420/0x758) from [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) from [<c02df280>] (netif_receive_skb+0x48/0xb4) [<c02df280>] (netif_receive_skb+0x48/0xb4) from [<c02df824>] (napi_gro_flush+0x70/0x94) [<c02df824>] (napi_gro_flush+0x70/0x94) from [<c02df864>] (napi_complete+0x1c/0x34) [<c02df864>] (napi_complete+0x1c/0x34) from [<c0278524>] (stmmac_poll+0x4e8/0x5c8) [<c0278524>] (stmmac_poll+0x4e8/0x5c8) from [<c02df940>] (net_rx_action+0xc4/0x1e4) [<c02df940>] (net_rx_action+0xc4/0x1e4) from [<c00258f0>] (__do_softirq+0x12c/0x2e8) [<c00258f0>] (__do_softirq+0x12c/0x2e8) from [<c0025da8>] (irq_exit+0x78/0xac) [<c0025da8>] (irq_exit+0x78/0xac) from [<c000f020>] (handle_IRQ+0x44/0x90) [<c000f020>] (handle_IRQ+0x44/0x90) from [<c0008530>] (gic_handle_irq+0x2c/0x5c) [<c0008530>] (gic_handle_irq+0x2c/0x5c) from [<c0012f3c>] (__irq_usr+0x3c/0x60) 3) The driver was setting the dma buffer size after allocating dma buffers, which caused a system panic when changing the MTU. BUG: Bad page state in process ifconfig pfn:2e850 page:c0b72a00 count:0 mapcount:0 mapping: (null) index:0x0 page flags: 0x200(arch_1) Modules linked in: CPU: 0 PID: 566 Comm: ifconfig Not tainted 3.13.0-rc6-01523-gf7111b9 #29 [<c001547c>] (unwind_backtrace+0x0/0xf8) from [<c00122dc>] (show_stack+0x10/0x14) [<c00122dc>] (show_stack+0x10/0x14) from [<c03c793c>] (dump_stack+0x70/0x88) [<c03c793c>] (dump_stack+0x70/0x88) from [<c00b2620>] (bad_page+0xc8/0x118) [<c00b2620>] (bad_page+0xc8/0x118) from [<c00b302c>] (get_page_from_freelist+0x744/0x870) [<c00b302c>] (get_page_from_freelist+0x744/0x870) from [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) from [<c00b4858>] (__get_free_pages+0x10/0x54) [<c00b4858>] (__get_free_pages+0x10/0x54) from [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) from [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) from [<c02d240c>] (__alloc_skb+0x68/0x13c) [<c02d240c>] (__alloc_skb+0x68/0x13c) from [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) from [<c0279378>] (stmmac_open+0x63c/0x1024) [<c0279378>] (stmmac_open+0x63c/0x1024) from [<c02e18cc>] (__dev_open+0xa0/0xfc) [<c02e18cc>] (__dev_open+0xa0/0xfc) from [<c02e1b40>] (__dev_change_flags+0x94/0x158) [<c02e1b40>] (__dev_change_flags+0x94/0x158) from [<c02e1c24>] (dev_change_flags+0x18/0x48) [<c02e1c24>] (dev_change_flags+0x18/0x48) from [<c0337bc0>] (devinet_ioctl+0x638/0x700) [<c0337bc0>] (devinet_ioctl+0x638/0x700) from [<c02c7aec>] (sock_ioctl+0x64/0x290) [<c02c7aec>] (sock_ioctl+0x64/0x290) from [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) from [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) from [<c000e760>] The fixes have been verified using reproducible, automated testing. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21bond: make slave_sysfs_ops staticstephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22md/raid5: close recently introduced race in stripe_head management.NeilBrown
As release_stripe and __release_stripe decrement ->count and then manipulate ->lru both under ->device_lock, it is important that get_active_stripe() increments ->count and clears ->lru also under ->device_lock. However we currently list_del_init ->lru under the lock, but increment the ->count outside the lock. This can lead to races and list corruption. So move the atomic_inc(&sh->count) up inside the ->device_lock protected region. Note that we still increment ->count without device lock in the case where get_free_stripe() was called, and in fact don't take ->device_lock at all in that path. This is safe because if the stripe_head can be found by get_free_stripe, then the hash lock assures us the no-one else could possibly be calling release_stripe() at the same time. Fixes: 566c09c53455d7c4f1130928ef8071da1a24ea65 Cc: stable@vger.kernel.org (3.13) Reported-and-tested-by: Ian Kumlien <ian.kumlien@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-21net: add vxlan descriptionJesse Brandeburg
Add a description to the vxlan module, helping save the world from the minions of destruction and confusion. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21drivers/firmware/memmap.c: use memblock apis for early memory allocationsSantosh Shilimkar
Switch to memblock interfaces for early memory allocator instead of bootmem allocator. No functional change in beahvior than what it is in current code from bootmem users points of view. Archs already converted to NO_BOOTMEM now directly use memblock interfaces instead of bootmem wrappers build on top of memblock. And the archs which still uses bootmem, these new apis just fallback to exiting bootmem APIs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21mm/memblock: remove unnecessary inclusions of bootmem.hGrygorii Strashko
Clean-up to remove depedency with bootmem headers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21intel-iommu: fix off-by-one in pagetable freeingAlex Williamson
dma_pte_free_level() has an off-by-one error when checking whether a pte is completely covered by a range. Take for example the case of attempting to free pfn 0x0 - 0x1ff, ie. 512 entries covering the first 2M superpage. The level_size() is 0x200 and we test: static void dma_pte_free_level(... ... if (!(0 > 0 || 0x1ff < 0 + 0x200)) { ... } Clearly the 2nd test is true, which means we fail to take the branch to clear and free the pagetable entry. As a result, we're leaking pagetables and failing to install new pages over the range. This was found with a PCI device assigned to a QEMU guest using vfio-pci without a VGA device present. The first 1M of guest address space is mapped with various combinations of 4K pages, but eventually the range is entirely freed and replaced with a 2M contiguous mapping. intel-iommu errors out with something like: ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083) In this case 5c2b8003 is the pointer to the previous leaf page that was neither freed nor cleared and 849c00083 is the superpage entry that we're trying to replace it with. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22Merge branch 'drm-vbl-timestamp' of git://gitorious.org/vsyrjala/linux into ↵Dave Airlie
drm-next Here's the vblank timestamp pull request you wanted. I addressed the few bugs that Mario pointed out and added the r-bs. As it has been a while since I made the changes, I gave it a quick spin on a few different i915 machines. Fortunately everything still seems to be fine. * 'drm-vbl-timestamp' of git://gitorious.org/vsyrjala/linux: drm/i915: Add a kludge for DSL incrementing too late and ISR not working drm/radeon: Move the early vblank IRQ fixup to radeon_get_crtc_scanoutpos() drm: Pass 'flags' from the caller to .get_scanout_position() drm: Fix vblank timestamping constants for interlaced modes drm/i915: Fix scanoutpos calculations for interlaced modes drm: Change {pixel,line,frame}dur_ns from s64 to int drm: Use crtc_clock in drm_calc_timestamping_constants() drm/radeon: Populate crtc_clock in radeon_atom_get_tv_timings() drm: Simplify the math in drm_calc_timestamping_constants() drm: Improve drm_calc_timestamping_constants() documentation drm/i915: Call drm_calc_timestamping_constants() earlier drm/i915: Kill hwmode save/restore drm: Pass the display mode to drm_calc_vbltimestamp_from_scanoutpos() drm: Pass the display mode to drm_calc_timestamping_constants()
2014-01-22Merge branch 'topic/core-stuff' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Some straggling drm core patches * 'topic/core-stuff' of git://people.freedesktop.org/~danvet/drm-intel: drm/gem: Always initialize the gem object in object_init drm/edid: Populate picture aspect ratio for CEA modes drm/edid: parse the list of additional 3D modes drm/edid: split VIC display mode lookup into a separate function drm: Make the connector mode_valid() vfunc return a drm_mode_status enum
2014-01-22Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie
into drm-next Just a single fix for sparse/smatch warnings introduced by the previous vmwgfx-next pull. * 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix recently introduced sparse / smatch warnings and errors
2014-01-21sfc: Fix transposed ptp_{under, over}size_sync_windows statisticsBen Hutchings
Somehow I transposed these two while bringing the original statistics support upstream. Fixes: 99691c4ac112 ('sfc: Add PTP counters to ethtool stats') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21sfc: Change efx_mcdi_reset_port to use ENTITY_RESET MC command.Jon Cooper
PORT_RESET MC command was NOP in the ef10 firmware hence we are using ENTITY_RESET to make sure all resource allocations are reset. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21Merge branches 'amba', 'fixes', 'kees', 'misc' and 'unstable/sa11x0' into ↵Russell King
for-next
2014-01-21Merge tag 'for-v3.14' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Dmitry Eremin-Solenikov: "I'm picking up power supply maintainership from Anton Vorontov. Could you please pull battery-2.6 git tree changes prepared for the v3.14 release. Highlights: - Power supply notifier - Several drivers gained DT support - Added Maxim 14577 driver - Change of maintainer" * tag 'for-v3.14' of git://git.infradead.org/battery-2.6: MAINTAINERS: Pick up power supply maintainership max17042_battery: Add IRQF_ONESHOT flag to use default irq handler gpio-charger: Support wakeup events power_supply: Add charger support for Maxim 14577 dt: Binding documentation for isp1704 charger isp1704_charger: Add DT support charger-manager: of_cm_parse_desc() should be static bq2415x_charger: Add DT support power_supply: Add power_supply_get_by_phandle bq2415x_charger: Use power_supply notifier for automode power: reset: Add as3722 power-off driver mfd: AS3722: Add dt node properties for system power controller charger-manager: Support deivce tree in charger manager driver charger-manager: Modify the way of checking battery's temperature power_supply: Add power_supply notifier
2014-01-21Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfdLinus Torvalds
Pull MFD changes from Lee Jones: "New drivers - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator Existing driver adaptions - Expansion of Wolfson Arizona DSP and High-Pass filter controls - TI TWL6040 default Regmap support and Regcache addition/bypass - Some nice Smatch catch fixes - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness - ChromeOS EC timing (delay) adaptions and added dependency on OF - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}' - Watchdog support added for NVIDIA AS3722 - Convert functions to static in TI AM335x - Realigned previously defeated functionality in TI AM335x - IIO ADC-TSC concurrency dead-lock/timeout resolution - Addition of Power Management and Clock support for Samsung core - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem - Greater use of irqdomain functionality in ST-E AB8500 - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h' - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/ - Device Tree documentation added for TI/Nat Semi LP3943 - Version detection and voltage tables for TI TPS6586x PMIC devices - Simplification of Freescale MC13XXX (de-)initialisation routines - Clean-up and simplification of the Realtek parent driver - Added support for RTL8402 Realtek PCI-Express card reader - Resource leak fix for Maxim 77686 - Possible suspend BUG() fix in OMAP USB TLL - Support for new Wolfson WM5110 Revision (D) - Testing of automatic assignment of of_node in mfd_add_device() - Reversion of the above when it started to cause issues - Remove legacy Platform Data from; TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal, unused uninitialised warning mitigation, error message clarity, removal of redundant/duplicate checks, licensing (GPL -> GPL2), coding consistency, duplicate function declaration, ret checks, commit corrections, redundant of_match_ptr() helper removal, spelling, #if-deffery removal and header guards name changes" * tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits) mfd: wm5110: Add register patch for rev D chip mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync() gpio: lp3943: Remove redundant of_match_ptr helper mfd: sta2x11-mfd: Use named constants for pci_power_t values Documentation: mfd: Fix LDO index in s2mps11.txt mfd: Cleanup mfd-mcp-sa11x0.h header mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code. mfd: twl6030: Fix endianness problem in IRQ handler mfd: sec-core: Add cells for S5M8767-clocks mfd: max14577: Remove redundant of_match_ptr helper mfd: twl6040: Fix sparse non static symbol warning mfd: Revert "mfd: Always assign of_node in mfd_add_device()" mfd: rtsx: Fix sparse non static symbol warning mfd: max77693: Set proper maximum register for MUIC regmap mfd: max77686: Fix regmap resource leak on driver remove mfd: Represent correct filenames in file headers mfd: rtsx: Add support for card reader rtl8402 mfd: rtsx: Add set pull control macro and simplify rtl8411 mfd: max8997: Enforce mfd_add_devices() return value check mfd: mc13xxx: Simplify probe() & remove() ...
2014-01-21IB/usnic: Use GFP_ATOMIC under spinlockDan Carpenter
This is called from qp_grp_and_vf_bind() and we are holding the vf->lock so the allocation can't sleep. Fixes: e3cf00d0a87f ('IB/usnic: Add Cisco VIC low-level hardware driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-21scsi_transport_srp: Fix kernel-doc warningsBart Van Assche
The following command has been used to verify that the kernel-doc tool no longer complains about undocumented fields: scripts/kernel-doc -html drivers/scsi/scsi_transport_srp.c \ include/scsi/scsi_transport_srp.h >srp-transport-doc.html Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Sebastian Riemer <sebastian.riemer@profitbricks.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-21scsi_transport_srp: Fix a race conditionBart Van Assche
The rport timers must be stopped before the SRP initiator destroys the resources associated with the SCSI host. This is necessary because otherwise the callback functions invoked from the SRP transport layer could trigger a use-after-free. Stopping the rport timers before invoking scsi_remove_host() can trigger long delays in the SCSI error handler if a transport layer failure occurs while scsi_remove_host() is in progress. Hence move the code for stopping the rport timers from srp_rport_release() into a new function and invoke that function after scsi_remove_host() has finished. This patch fixes the following sporadic kernel crash: kernel BUG at include/asm-generic/dma-mapping-common.h:64! invalid opcode: 0000 [#1] SMP RIP: 0010:[<ffffffffa03b20b1>] [<ffffffffa03b20b1>] srp_unmap_data+0x121/0x130 [ib_srp] Call Trace: [<ffffffffa03b20fc>] srp_free_req+0x3c/0x80 [ib_srp] [<ffffffffa03b2188>] srp_finish_req+0x48/0x70 [ib_srp] [<ffffffffa03b21fb>] srp_terminate_io+0x4b/0x60 [ib_srp] [<ffffffffa03a6fb5>] __rport_fail_io_fast+0x75/0x80 [scsi_transport_srp] [<ffffffffa03a7438>] rport_fast_io_fail_timedout+0x88/0xc0 [scsi_transport_srp] [<ffffffff8108b370>] worker_thread+0x170/0x2a0 [<ffffffff81090876>] kthread+0x96/0xa0 [<ffffffff8100c0ca>] child_rip+0xa/0x20 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-21scsi_transport_srp: Block rport upon TL error even with fast_io_fail_tmo = offBart Van Assche
The current behavior of the SRP transport layer when a transport layer error is encountered is to block SCSI command processing only if fast_io_fail_tmo != off. The current behavior of the FC transport layer when a transport layer error is encountered is to block SCSI command processing no matter which value fast_io_fail_tmo has been set to. Make the behavior of the SRP transport layer consistent with that of the FC transport layer to avoid confusion. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-21spi: core: Fix transfer failure when master->transfer_one returns positive valueAxel Lin
master->transfer_one returns positive value is not a error. So set ret to 0 when master->transfer_one returns positive value. Otherwise, I hit "spi_master spi0: failed to transfer one message from queue" error when my transfer_one callback returns 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-21Merge tag 'sound-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It was holiday season, so no wonder that there are little changes in framework level, although diffstat shows quite many changes spreaded over sound/* directories. Most of changes are cleanups, code refactoring and fixes. Some highlights: - Removal of OSS sleep_on usages by Arnd - Simplified memalloc helper codes, drop obsoleted features; now it's built into PCM driver instead of an individual module - Warn if PCM buffer preallocation fails, which will show page allocation issues more clearly - Compress offload API updates for sample rates by Vinod - PCM glitch workaround on ctxfi emu20k1 by Sarah - Drop cs46xx DSP blobs, using firmware loader now - USB-audio quitks for Plantronics Gamecom 780, Creative VF0420, and Focusrite Saffire 6 HD-audio specifics: - Standardize Kconfigs of HD-audio codec drivers; now "make localmodconfig" recognizes configs properly (finally!) - Parallel PM implementation by Mengdong - BayleyBay/ValleyView2 board fixups - Broadwell audio support - Runtime PM improvement (PantherPoint, etc) - Quirks: Dell subwooer, Gigabyte mobo jack detection oddity, Dell AiO click noise fixes, Dell headset mic fixes, etc - Automatic bind with HDMI codec parser without generic parser - More AD codec fixes (since 3.12 regression) including the automatic stereo mix support - Common Thinkpad ACPI helper for Realtek and Conexant codecs ASoC specifics: - Update to the generic DMA code to support deferred probe and managed resources - New drivers for BCM2835 (used in Raspberry Pi), Tegra with MAX98090 and Analog Devices AXI I2S and S/PDIF controller IPs - Device tree support for the simple card, max98090 and cs42l52 - Conversion of the Samsung drivers to native dmaengine, making them multiplatform compatible and hopefully helping keep them more modern and up to date. - More regmap conversions, including a very welcome one for twl6040 from Peter Ujfalusi - A big overhaul of the DaVinci drivers also from Peter Ujfalusi - Lots of DMA updates from Lars-Peter - Improvements to the constraints handling code from Lars-Peter - A very helpful conversion of the TWL4030 driver to regmap from Peter - A new driver for the Freescale ESAI controller from Nicolin Chen - Conversion of some of the drivers to use params_width() - Extensions to DPCM for use with compressed audio from Liam" * tag 'sound-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (396 commits) ASoC: dapm: Fix double prefix addition ASoC: compress: Add suport for DPCM into compressed audio ASoC: DPCM: make some DPCM API calls non static for compressed usage ASoC: core: Fix possible NULL pointer dereference of pcm->config ALSA: hda - add headset mic detect quirks for some Dell machines ASoC: tlv320aic32x4: Fix regmap range_min ASoC: core: Return -ENOTSUPP from set_sysclk() if no operation provided ASoC: dapm: Change prototype of soc_widget_read ASoC: samsung: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag ASoC: axi-{spdif,i2s}: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag ASoC: generic-dmaengine-pcm: Check DMA residue granularity ASoC: generic-dmaengine-pcm: Check NO_RESIDUE flag at runtime dma: pl330: Set residue_granularity dma: Indicate residue granularity in dma_slave_caps ASoC: simple-card: fix one bug to writing to the platform data ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper ALSA: Add helper function for intersecting two rate masks ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates ASoC: pcm: Properly initialize hw->rate_max ...
2014-01-21Merge tag 'pinctrl-v3.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull bulk pin control changes from Linus Walleij: "This has been queued and tested for a while. Lots of action here, like in the GPIO tree, embedded stuff like this is really hot now it seems. Details in the signed tag. I'm especially happy about the Qualcomm driver as it is used in such a huge subset of mobile handsets out there, and these platforms in general need better upstream support - New driver for the Qualcomm TLMM pin controller and its msm8x74 subdriver. - New driver for the Broadcom Capri BCM281xx SoC. - New subdriver for the imx25 pin controller. - New subdriver for the Tegra124 pin controller. - Lock GPIO lines as IRQs for select combined pin control and GPIO drivers for baytrail and sirf. - Some semi-big refactorings and extenstions to the sirf driver. - Lots of patching, cleanup and fixing in the Renesas "PFC" driver and associated subdrivers as usual. It is settling down a little bit now it seems. - Minor fixes and incremental updates here and there as usual" * tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: sunxi: Honor GPIO output initial vaules pinctrl: capri: add dependency on OF ARM: bcm11351: Enable pinctrl for Broadcom Capri SoCs ARM: pinctrl: Add Broadcom Capri pinctrl driver pinctrl: Add pinctrl binding for Broadcom Capri SoCs pinctrl: Add void * to pinctrl_pin_desc pinctrl: st: Fix a typo in probe pinctrl: Fix some typos and grammar issues in the documentation pinctrl: sirf: lock IRQs when starting them pinctrl: sirf: put gpio interrupt pin into input status automatically pinctrl: sirf: use only one irq_domain for the whole device node pinctrl: single: fix infinite loop caused by bad mask pinctrl: single: fix pcs_disable with bits_per_mux pinctrl: single: fix DT bindings documentation pinctrl: as3722: Set pin to output mode for some function pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync pinctrl: sirf: fix the pins of sdmmc5 connected with TriG pinctrl: sirf: add lost usp1_uart_nostreamctrl group for atlas6 pinctrl: sunxi: Add Allwinner A20 clock output pin functions pinctrl/lantiq: fix typo ...
2014-01-21spi: Spelling s/finised/finished/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-21Merge tag 'gpio-v3.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO tree bulk changes from Linus Walleij: "A big set this merge window, as we have much going on in this subsystem. The changes to other subsystems (notably a slew of ARM machines as I am doing away with their custom APIs) have all been ACKed to the extent possible. Major changes this time: - Some core improvements and cleanups to the new GPIO descriptor API. This seems to be working now so we can start the exodus to this API, moving gradually away from the global GPIO numberspace. - Incremental improvements to the ACPI GPIO core, and move the few GPIO ACPI clients we have to the GPIO descriptor API right *now* before we go any further. We actually managed to contain this *before* we started to litter the kernel with yet another hackish global numberspace for the ACPI GPIOs, which is a big win. - The RFkill GPIO driver and all platforms using it have been migrated to use the GPIO descriptors rather than fixed number assignments. Tegra machine has been migrated as part of this. - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x. Those should be really good examples of how I expect a nice GPIO driver to look these days. - Do away with custom GPIO implementations on a major part of the ARM machines: ks8695, lpc32xx, mv78xx0. Make a first step towards the same in the horribly convoluted Samsung S3C include forest. We expect to continue to clean this up as we move forward. - Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and lynxpoint. This makes the GPIOlib core aware that a certain GPIO line is used for IRQs and can then enforce some semantics such as disallowing a GPIO line marked as in use for IRQ to be switched to output mode. - Drop all use of irq_set_chip_and_handler_name(). The name provided in these cases were just unhelpful tags like "mux" or "demux". - Extend the MCP23s08 driver to handle interrupts. - Minor incremental improvements for rcar, lynxpoint, em 74x164 and msm drivers. - Some non-urgent bug fixes here and there, duplicate #includes and that usual kind of cleanups" Fix up broken Kconfig file manually to make this all compile. * tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits) gpio: mcp23s08: fix casting caused build warning gpio: mcp23s08: depend on OF_GPIO gpio: mcp23s08: Add irq functionality for i2c chips ARM: S5P[v210|c100|64x0]: Fix build error gpio: pxa: clamp gpio get value to [0,1] ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h> ARM: S3C[24|64]xx: move includes back under <mach/> scope Documentation / ACPI: update to GPIO descriptor API gpio / ACPI: get rid of acpi_gpio.h gpio / ACPI: register to ACPI events automatically mmc: sdhci-acpi: convert to use GPIO descriptor API ARM: s3c24xx: fix build error gpio: f7188x: set can_sleep attribute gpio: samsung: Update documentation gpio: samsung: Remove hardware.h inclusion gpio: xtensa: depend on HAVE_XTENSA_GPIO32 gpio: clps711x: Enable driver compilation with COMPILE_TEST gpio: clps711x: Use of_match_ptr() net: rfkill: gpio: convert to descriptor-based GPIO interface leds: s3c24xx: Fix build failure ...
2014-01-21Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "For 3.14, the I2C subsystem has the following to offer: - new drivers for Renesas RIIC and RobotFuzz OSIF - driver cleanups & improvements & bugfixes Pretty standard stuff this time, I'd say. There is more complex stuff coming up, but I didn't have the bandwidth between the years to pull it in for this release. Sadly" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits) i2c: s3c2410: fix quirk usage for 64-bit i2c: pnx: Use devm_*() functions i2c: at91: add a new compatibility string for the at91sam9261 i2c-ismt: support I2C_SMBUS_I2C_BLOCK_DATA transaction type i2c: Add bus driver for for OSIF USB i2c device. i2c: i2c-tiny-usb: Remove RobotFuzz USB vendor:product ID i2c: designware: remove HAVE_CLK build dependecy Documentation: i2c: Remove obsolete example i2c: nomadik: remove platform data header i2c: nomadik: auto-calculate slave setup time i2c: viperboard: remove superfluous assignment i2c: xilinx: Use devm_* functions i2c: xilinx: Do not enable irq before irq handler i2c: xilinx: Fix i2c checkpatch warnings i2c: at91: document clock properties i2c: isch: Use devm_request_region() i2c: viperboard: Use devm_kzalloc() functions i2c: imx: propagate irq error code in probe i2c: s3c2410: dont need CPU_FREQ transitions for exynos series i2c: s3c2410: Add polling mode support ...
2014-01-21dm space map metadata: fix bug in resizing of thin metadataJoe Thornber
This bug was introduced in commit 7e664b3dec431e ("dm space map metadata: fix extending the space map"). When extending a dm-thin metadata volume we: - Switch the space map into a simple bootstrap mode, which allocates all space linearly from the newly added space. - Add new bitmap entries for the new space - Increment the reference counts for those newly allocated bitmap entries - Commit changes to disk - Switch back out of bootstrap mode. But, the disk commit may allocate space itself, if so this fact will be lost when switching out of bootstrap mode. The bug exhibited itself as an error when the bitmap_root, with an erroneous ref count of 0, was subsequently decremented as part of a later disk commit. This would cause the disk commit to fail, and thinp to enter read_only mode. The metadata was not damaged (thin_check passed). The fix is to put the increments + commit into a loop, running until the commit has not allocated extra space. In practise this loop only runs twice. With this fix the following device mapper testsuite test passes: dmtest run --suite thin-provisioning -n thin_remove_works_after_resize Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # depends on commit 7e664b3dec431e
2014-01-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer updates from James Morris: "Changes for this kernel include maintenance updates for Smack, SELinux (and several networking fixes), IMA and TPM" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits) SELinux: Fix memory leak upon loading policy tpm/tpm-sysfs: active_show() can be static tpm: tpm_tis: Fix compile problems with CONFIG_PM_SLEEP/CONFIG_PNP tpm: Make tpm-dev allocate a per-file structure tpm: Use the ops structure instead of a copy in tpm_vendor_specific tpm: Create a tpm_class_ops structure and use it in the drivers tpm: Pull all driver sysfs code into tpm-sysfs.c tpm: Move sysfs functions from tpm-interface to tpm-sysfs tpm: Pull everything related to /dev/tpmX into tpm-dev.c char: tpm: nuvoton: remove unused variable tpm: MAINTAINERS: Cleanup TPM Maintainers file tpm/tpm_i2c_atmel: fix coccinelle warnings tpm/tpm_ibmvtpm: fix unreachable code warning (smatch warning) tpm/tpm_i2c_stm_st33: Check return code of get_burstcount tpm/tpm_ppi: Check return value of acpi_get_name tpm/tpm_ppi: Do not compare strcmp(a,b) == -1 ima: remove unneeded size_limit argument from ima_eventdigest_init_common() ima: update IMA-templates.txt documentation ima: pass HASH_ALGO__LAST as hash algo in ima_eventdigest_init() ima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init() ...
2014-01-21ipc: add intel-mid's pci id macrosDavid Cohen
For readability matters, this patch replaces the hardcoded pci ids by human readable macros. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21hp-wireless: new driver for hp wireless button for Windows 8Alex Hung
Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21toshiba_acpi: Support RFKILL hotkey scancodeUnai Uribarri
This scancode is used in new 2013 models like Satellite P75-A7200. Signed-off-by: Unai Uribarri <unaiur@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21hp_accel: Add a new PnP ID HPQ6007 for new HP laptopsTakashi Iwai
The DriveGuard chips on the new HP laptops are with a new PnP ID "HPQ6007". It should be compatible with older chips. Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21sony-laptop: remove unnecessary assigment of lenColin Ian King
The assignment of len = len is unnecessary, so remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21fujitsu-laptop: fix error return codeJulia Lawall
These functions mix the use of result and error. In acpi_fujitsu_add, result does not seem useful; it would seem reasonable to propagate the return value of acpi_bus_update_power in an error case. On the other hand, in the case of acpi_fujitsu_hotkey_add, there is an initialization of result that can lead to what looks like a failure case, but that does not abort the function. The variable result is kept for this case. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21dell-laptop: Only install the i8042 filter when rfkill is activeHans de Goede
Installing the i8042 filter is not useful on machines where rfkill is not whitelisted, so move the filter installation into dell_setup_rfkill, after the whitelist check. This avoids doing a needless and potentially troublesome rfkill query (dell_send_request(buf, 17, 11)) when the wireless Fn key gets pressed on non whitelisted laptops. This patch was written as a result of: https://bugzilla.redhat.com/show_bug.cgi?id=1045807 It is not yet clear if this is related, but it is a good idea to not register the i8042 filter in general. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21X86 platform: New BayTrail IOSF-SB MBI driverDavid E. Box
Current Intel SOC cores use a MailBox Interface (MBI) to provide access to unit devices connected to the system fabric. This driver implements access to this interface on BayTrail platforms. This is a requirement for drivers that need access to unit registers on the platform (e.g. accessing the PUNIT for power management features such as RAPL). Serialized access is handled by all exported routines with spinlocks. The API includes 3 functions for access to unit registers: int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr) int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr) int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask) port: indicating the unit being accessed opcode: the read or write port specific opcode offset: the register offset within the port mdr: the register data to be read, written, or modified mask: bit locations in mdr to change Returns nonzero on error Note: GPU code handles access to the GFX unit. Therefore access to that unit with this driver is disallowed to avoid conflicts. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21drivers: platform: Include appropriate header file in mxm-wmi.cRashika Kheria
This patch includes appropriate header file linux/mxm-wmi.h in x86/mxm-wmi.c because functions mxm_wmi_call_mxds(), mxm_wmi_call_mxmx() and mxm_wmi_supported() have their prototype declaration in linux/mxm-wmi.h. Thus, it also eliminates the following warnings in x86/mxm-wmi.c: drivers/platform/x86/mxm-wmi.c:43:5: warning: no previous prototype for ‘mxm_wmi_call_mxds’ [-Wmissing-prototypes] drivers/platform/x86/mxm-wmi.c:68:5: warning: no previous prototype for ‘mxm_wmi_call_mxmx’ [-Wmissing-prototypes] drivers/platform/x86/mxm-wmi.c:93:6: warning: no previous prototype for ‘mxm_wmi_supported’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21drivers: platform: Mark functions as static in hp_accel.cRashika Kheria
This patch marks the functions lis3lv02d_acpi_init(), lis3lv02d_acpi_read() and lis3lv02d_acpi_write() as static in x86/hp_accel.c because they are not used outside this file. Thus, it also eliminates the following warnings in x86/hp_accel.c: drivers/platform/x86/hp_accel.c:91:5: warning: no previous prototype for ‘lis3lv02d_acpi_init’ [-Wmissing-prototypes] drivers/platform/x86/hp_accel.c:109:5: warning: no previous prototype for ‘lis3lv02d_acpi_read’ [-Wmissing-prototypes] drivers/platform/x86/hp_accel.c:132:5: warning: no previous prototype for ‘lis3lv02d_acpi_write’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21dell-laptop: rkill whitelist Precision modelsHans de Goede
Given that Precision mobile workstations are top of the line Dell products, I expect the functionality of rfkill there to be as reliable as on Latitudes so whitelist Precisions. https://bugzilla.kernel.org/show_bug.cgi?id=65731 Reported-by: Calum Lind <calumlind@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21ipc: simplify platform data approachDavid Cohen
This patch removes the unnecessary enum for platform type to handle the array of pdatas. We can set pdata directly to pci_device_id struct instead. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21asus-wmi: Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck
Simplify the code and avoid race conditions due to late sysfs attribute registration. Also replace SENSOR_DEVICE_ATTR with DEVICE_ATTR; the additional parameter is not used and thus unnecessary. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21compal-laptop: Use devm_hwmon_device_register_with_groupsGuenter Roeck
Simplify the code and create hwmon attributes as well as hwmon device in one go. With the new hwmon API, hwmon attributes are now attached to the hwmon device. Therefore, split hwmon and device attributes into two separate groups. Platform attributes are still attached to the platform device. Also use devm_kzalloc to allocate local data structures for further simplification. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21compal-laptop: Replace SENSOR_DEVICE_ATTR with DEVICE_ATTRGuenter Roeck
The extra argument to SENSOR_DEVICE_ATTR is not used. It is therefore not necessary to use SENSOR_DEVICE_ATTR in the first place. Replace it with DEVICE_ATTR. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21eeepc-laptop: Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck
Simplify the code and avoid race condition caused by creating sysfs attributes after creating the hwmon device. Also replace SENSOR_DEVICE_ATTR with DEVICE_ATTR since the extra argument is not used and SENSOR_DEVICE_ATTR is not needed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>