summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2014-01-30drm/i915: vlv: fix DP PHY lockup due to invalid PP sequencer setupImre Deak
Atm we setup the HW panel power sequencer logic both for eDP and DP ports. On eDP we then go on and start the power on sequence and commence with link training when it's ready. On DP we don't do the power on sequencing but do the link training immediately. At this point the DP PHY block gets stuck, since - supposedly - it is waiting for the power on sequence to finish. The actual register write that seems to hold off the PHY is PIPEX_PP_ON_DELAYS[Panel Control Port Select]. Writing here a non-0 value eventually sets PIPEX_PP_STATUS[Require Asset Status] to 1 and blocks the PHY until the panel power on is ready. Fix this by not doing any PP sequencing setup for DP ports. Thanks to Ville Syrjälä, Jesse Barnes and Todd Previte for the help in tracking this down. Note that on older gmch platforms (where we have lvds instead of edp) we've hacked around this by writing the magic ABCD unlock key to PP registers, which disables the hw sanity checks. For edp all platforms thus far had the pch split, with the edp port in the north display complex and the PP registers on the pch the hw sanity checks (expressed through the "Require Asset Status" bit) was never functional, hence never a real issue. This regression has been introduce in commit bf13e81b904a37d94d83dd6c3b53a147719a3ead Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Sep 6 07:40:05 2013 +0300 drm/i915: add support for per-pipe power sequencing on vlv Signed-off-by: Imre Deak <imre.deak@intel.com> [danvet: Add note about the bigger story here.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-30xen/gnttab: Use phys_addr_t to describe the grant frame base addressJulien Grall
On ARM, address size can be 32 bits or 64 bits (if CONFIG_ARCH_PHYS_ADDR_T_64BIT is enabled). We can't assume that the grant frame base address will always fits in an unsigned long. Use phys_addr_t instead of unsigned long as argument for gnttab_setup_auto_xlat_frames. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2014-01-30xen: swiotlb: handle sizeof(dma_addr_t) != sizeof(phys_addr_t)Ian Campbell
The use of phys_to_machine and machine_to_phys in the phys<=>bus conversions causes us to lose the top bits of the DMA address if the size of a DMA address is not the same as the size of the phyiscal address. This can happen in practice on ARM where foreign pages can be above 4GB even though the local kernel does not have LPAE page tables enabled (which is totally reasonable if the guest does not itself have >4GB of RAM). In this case the kernel still maps the foreign pages at a phys addr below 4G (as it must) but the resulting DMA address (returned by the grant map operation) is much higher. This is analogous to a hardware device which has its view of RAM mapped up high for some reason. This patch makes I/O to foreign pages (specifically blkif) work on 32-bit ARM systems with more than 4GB of RAM. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-30target: Fix percpu_ref_put race in transport_lun_remove_cmdNicholas Bellinger
This patch fixes a percpu_ref_put race for se_lun->lun_ref in transport_lun_remove_cmd() where ->lun_ref could end up being put more than once per command via different target completion and fabric release contexts. It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that percpu_ref_put() is only ever called once per se_cmd. This bug was manifesting itself as a LUN shutdown regression bug in >= v3.13 code, where percpu_ref_kill() would end up hanging indefinately due to the incorrect percpu_ref count. (Change se_cmd->lun_ref_active from bool -> int to force at least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang) Reported-by: Tommy Apel <tommyapeldk@gmail.com> Cc: Tommy Apel <tommyapeldk@gmail.com> Cc: <stable@vger.kernel.org> #3.13+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-30target/iscsi: Fix network portal creation raceAndy Grover
When creating network portals rapidly, such as when restoring a configuration, LIO's code to reuse existing portals can return a false negative if the thread hasn't run yet and set np_thread_state to ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack when attempting to bind to the same address/port. This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list, so even if the thread hasn't run yet, iscsit_get_np will return the existing np. Also, convert np_lock -> np_mutex + hold across adding new net portal to g_np_list to prevent a race where two threads may attempt to create the same network portal, resulting in one of them failing. (nab: Add missing mutex_unlocks in iscsit_add_np failure paths) (DanC: Fix incorrect spin_unlock -> spin_unlock_bh) Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-29Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Been a bit busy, first week of kids school, and waiting on other trees to go in before I could send this, so its a bit later than I'd normally like. Highlights: - core: timestamp fixes, lots of misc cleanups - new drivers: bochs virtual vga - vmwgfx: major overhaul for their nextgen virt gpu. - i915: runtime D3 on HSW, watermark fixes, power well work, fbc fixes, bdw is no longer prelim. - nouveau: gk110/208 acceleration, more pm groundwork, old overlay support - radeon: dpm rework and clockgating for CIK, pci config reset, big endian fixes - tegra: panel support and DSI support, build as module, prime. - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast: fixes - msm: hdmi support for mdp5" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits) drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking drm: ast,cirrus,mgag200: use drm_can_sleep drm/gma500: Lock struct_mutex around cursor updates drm/i915: Fix the offset issue for the stolen GEM objects DRM: armada: fix missing DRM_KMS_FB_HELPER select drm/i915: Decouple GPU error reporting from ring initialisation ...
2014-01-29Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dma updates from Vinod Koul: - new driver for BCM2835 used in R-pi - new driver for MOXA ART - dma_get_any_slave_channel API for DT based systems - minor fixes and updates spread acrooss driver [ The fsl-ssi dual fifo mode support addition clashed badly with the other changes to fsl-ssi that came in through the sound merge. I did a very rough cut at fixing up the conflict, but Nicolin Chen (author of both sides) will need to verify and check things ] * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: mmp_pdma: fix mismerge dma: pl08x: Export pl08x_filter_id acpi-dma: align documentation with kernel-doc format dma: fix vchan_cookie_complete() debug print DMA: dmatest: extend the "device" module parameter to 32 characters drivers/dma: fix error return code dma: omap: Set debug level to debugging messages dmaengine: fix kernel-doc style typos for few comments dma: tegra: add support for Tegra148/124 dma: dw: use %pad instead of casting dma_addr_t dma: dw: join split up messages dma: dw: fix style of multiline comment dmaengine: k3dma: fix sparse warnings dma: pl330: Use dma_get_slave_channel() in the of xlate callback dma: pl330: Differentiate between submitted and issued descriptors dmaengine: sirf: Add device_slave_caps interface DMA: Freescale: change BWC from 256 bytes to 1024 bytes dmaengine: Add MOXA ART DMA engine driver dmaengine: Add DMA_PRIVATE to BCM2835 driver dma: imx-sdma: Assign a default script number for ROM firmware cases ...
2014-01-29Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform Pull chrome platform cleanups and improvements from Olof Johansson: - Use deferred probing on Chrome OS platforms for the i2c device registration. This fixes a long-standing race of initialization of touchpad/screen on Chromebooks. - Added in platform device registration for pstore console on supported hardware - Misc smaller fixes (__initdata, module exit cleanup, etc) * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: unregister platform driver/device when module exit platform/chrome: Make i2c_adapter_names static platform/chrome: chromeos_laptop - fix incorrect placement of __initdata tag platform/chrome: chromeos_laptop - Use deferred probing platform/chrome: chromeos_laptop - Restructure device associations platform/chrome: Add pstore platform_device
2014-01-29Merge tag 'iommu-updates-v3.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU Updates from Joerg Roedel: "A few patches have been queued up for this merge window: - improvements for the ARM-SMMU driver (IOMMU_EXEC support, IOMMU group support) - updates and fixes for the shmobile IOMMU driver - various fixes to generic IOMMU code and the Intel IOMMU driver - some cleanups in IOMMU drivers (dev_is_pci() usage)" * tag 'iommu-updates-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (36 commits) iommu/vt-d: Fix signedness bug in alloc_irte() iommu/vt-d: free all resources if failed to initialize DMARs iommu/vt-d, trivial: clean sparse warnings iommu/vt-d: fix wrong return value of dmar_table_init() iommu/vt-d: release invalidation queue when destroying IOMMU unit iommu/vt-d: fix access after free issue in function free_dmar_iommu() iommu/vt-d: keep shared resources when failed to initialize iommu devices iommu/vt-d: fix invalid memory access when freeing DMAR irq iommu/vt-d, trivial: simplify code with existing macros iommu/vt-d, trivial: use defined macro instead of hardcoding iommu/vt-d: mark internal functions as static iommu/vt-d, trivial: clean up unused code iommu/vt-d, trivial: check suitable flag in function detect_intel_iommu() iommu/vt-d, trivial: print correct domain id of static identity domain iommu/vt-d, trivial: refine support of 64bit guest address iommu/vt-d: fix resource leakage on error recovery path in iommu_init_domains() iommu/vt-d: fix a race window in allocating domain ID for virtual machines iommu/vt-d: fix PCI device reference leakage on error recovery path drm/msm: Fix link error with !MSM_IOMMU iommu/vt-d: use dedicated bitmap to track remapping entry allocation status ...
2014-01-29Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog updates from Wim Van Sebroeck: - new driver for bcm281xx watchdog device - new driver for gpio based watchdog devices - remove DEFINE_PCI_DEVICE_TABLE macro for watchdog device drivers - conversion of davinci_wdt and mpc8xxx_wdt to watchdog core - improvements on davinci_wdt, at91/dt, at91sam9_wdt and s3c2410_wdt - Auto-detect IO address and expand supported chips on w836* super-I/O chipsets - core: Make dt "timeout-sec" property work on drivers w/out min/max - fix Kconfig dependencies - sirf: Remove redundant of_match_ptr helper - mach-moxart: add restart handler - hpwdt patch to display better panic information - imx2_wdt: disable watchdog timer during low power mode * git://www.linux-watchdog.org/linux-watchdog: (31 commits) watchdog: w83627hf_wdt: Reset watchdog trigger during initialization watchdog: w83627hf: Add support for W83697HF and W83697UG watchdog: w83627hf: Auto-detect IO address and supported chips watchdog: at91sam9_wdt: increase security margin on watchdog counter reset watchdog: at91sam9_wdt: avoid spurious watchdog reset during init watchdog: at91sam9_wdt: fix secs_to_ticks ARM: at91/dt: add watchdog properties to kizbox board ARM: at91/dt: add sam9 watchdog default options to SoCs watchdog: at91sam9_wdt: update device tree doc watchdog: at91sam9_wdt: better watchdog support watchdog: sp805_wdt depends also on ARM64 watchdog: mach-moxart: add restart handler watchdog: mpc8xxx_wdt convert to watchdog core watchdog: sirf: Remove redundant of_match_ptr helper watchdog: hpwdt patch to display informative string watchdog: dw_wdt: remove build dependencies watchdog: imx2_wdt: disable watchdog timer during low power mode watchdog: s3c2410_wdt: Report when the watchdog reset the system watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register watchdog: s3c2410_wdt: Handle rounding a little better for timeout ...
2014-01-29Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Mostly bugfixes, small but wanted cleanups, and Paul's init.h removal applied" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rcar: fix NACK error code i2c: update i2c_algorithm documentation i2c: rcar: use devm_clk_get to ensure clock is properly ref-counted i2c: rcar: do not print error if device nacks transfer i2c: rely on driver core when sanitizing devices i2c: delete non-required instances of include <linux/init.h> i2c: acorn: is tristate and should use module.h i2c: piix4: Standardize log messages i2c: piix4: Use different message for AMD Auxiliary SMBus Controller i2c: piix4: Add support for AMD ML and CZ SMBus changes
2014-01-29Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon updates from Jean Delvare: "This include it87 driver improvements, and a tree-wide change of my e-mail address" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: Update Jean Delvare's e-mail address hwmon: (it87) Print proper names for the IT8771E and IT8772E hwmon: (it87) Add support for the ITE IT8603E
2014-01-29Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform drivers update from Matthew Garrett: "Nothing amazingly special here. Some cleanups, a new driver to support a single button on some new HPs, a tiny amount of hardware enablement" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: ipc: add intel-mid's pci id macros hp-wireless: new driver for hp wireless button for Windows 8 toshiba_acpi: Support RFKILL hotkey scancode hp_accel: Add a new PnP ID HPQ6007 for new HP laptops sony-laptop: remove unnecessary assigment of len fujitsu-laptop: fix error return code dell-laptop: Only install the i8042 filter when rfkill is active X86 platform: New BayTrail IOSF-SB MBI driver drivers: platform: Include appropriate header file in mxm-wmi.c drivers: platform: Mark functions as static in hp_accel.c dell-laptop: rkill whitelist Precision models ipc: simplify platform data approach asus-wmi: Convert to use devm_hwmon_device_register_with_groups compal-laptop: Use devm_hwmon_device_register_with_groups compal-laptop: Replace SENSOR_DEVICE_ATTR with DEVICE_ATTR eeepc-laptop: Convert to use devm_hwmon_device_register_with_groups compal-laptop: Use devm_kzalloc to allocate local data structure dell-laptop: fix to return error code in dell_send_intensity()
2014-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several fixups, of note: 1) Fix unlock of not held spinlock in RXRPC code, from Alexey Khoroshilov. 2) Call pci_disable_device() from the correct shutdown path in bnx2x driver, from Yuval Mintz. 3) Fix qeth build on s390 for some configurations, from Eugene Crosser. 4) Cure locking bugs in bond_loadbalance_arp_mon(), from Ding Tianhong. 5) Must do netif_napi_add() before registering netdevice in sky2 driver, from Stanislaw Gruszka. 6) Fix lost bug fix during merge due to code movement in ieee802154, noticed and fixed by the eagle eyed Stephen Rothwell. 7) Get rid of resource leak in xen-netfront driver, from Annie Li. 8) Bounds checks in qlcnic driver are off by one, from Manish Chopra. 9) TPROXY can leak sockets when TCP early demux is enabled, fix from Holger Eitzenberger" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) qeth: fix build of s390 allmodconfig bonding: fix locking in bond_loadbalance_arp_mon() tun: add device name(iff) field to proc fdinfo entry DT: net: davinci_emac: "ti, davinci-no-bd-ram" property is actually optional DT: net: davinci_emac: "ti, davinci-rmii-en" property is actually optional bnx2x: Fix generic option settings net: Fix warning on make htmldocs caused by skbuff.c llc: remove noisy WARN from llc_mac_hdr_init qlcnic: Fix loopback test failure qlcnic: Fix tx timeout. qlcnic: Fix initialization of vlan list. qlcnic: Correct off-by-one errors in bounds checks net: Document promote_secondaries net: gre: use icmp_hdr() to get inner ip header i40e: Add missing braces to i40e_dcb_need_reconfig() xen-netfront: fix resource leak in netfront net: 6lowpan: fixup for code movement hyperv: Add support for physically discontinuous receive buffer sky2: initialize napi before registering device net: Fix memory leak if TPROXY used with TCP early demux ...
2014-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc update from David Miller: "Two cleanups from Paul Gortmaker and hook up the new scheduler system calls" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Hook up sched_setattr and sched_getattr syscalls. sparc: don't use module_init in non-modular pci.c code sparc: delete non-required instances of include <linux/init.h>
2014-01-29Revert "xhci: replace xhci_write_64() with writeq()"Sarah Sharp
This reverts commit 7dd09a1af2c7150269350aaa567a11b06e831003. Many xHCI host controllers can only handle 32-bit addresses, and writing 64-bits at a time causes them to fail. Rafał reports that USB devices simply do not enumerate, and reverting this patch helps. Branimir reports that his host controller doesn't respond to an Enable Slot command and dies: [ 75.576160] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 88.991634] xhci_hcd 0000:03:00.0: Stopped the command ring failed, maybe the host is dead [ 88.991748] xhci_hcd 0000:03:00.0: Abort command ring failed [ 88.991845] xhci_hcd 0000:03:00.0: HC died; cleaning up [ 93.985489] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 93.985494] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead. [ 98.982586] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 98.982591] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead. [ 103.979696] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 103.979702] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Reported-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Branimir Maksimovic <branimir.maksimovic@gmail.com> Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
2014-01-30Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next more fixes for nouveau. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup
2014-01-30drm/nouveau: resume display if any later suspend bits failIlia Mirkin
If either idling channels or suspending the fence were to fail, the display would never be resumed. Also if a client fails, resume the fence (not functionally important, but it would potentially leak memory). See https://bugs.freedesktop.org/show_bug.cgi?id=70213 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-30drm/nouveau: fix lock unbalance in nouveau_crtc_page_flipMaarten Lankhorst
Fixes a regression introduced by d5c1e84b3a130f0 "drm/nouveau: hold mutex while syncing to kernel channel". Cc: stable@vger.kernel.org #3.13 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-30drm/nouveau: implement hooks for needed for drm vblank timestamping supportBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-30drm/nouveau/disp: add a method to fetch info needed by drm vblank timestampingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-30drm/nv50: fill in crtc mode struct members from crtc_mode_fixupBen Skeggs
The DRM uses the adjusted mode to calculate constants for vblank timestamping. Our encoder mode_fixup (usually) replaces this data with our backend mode information, which doesn't have the needed data filled in already. Reported-by: Mario Kleiner mario.kleiner.de@gmail.com Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-29drm/radeon/dce8: workaround for atom BlankCrtc tableAlex Deucher
Some DCE8 boards have a funky BlankCrtc table that results in a timeout when trying to blank the display. The timeout is harmless (all operations needed from the table are complete), but wastes time and is confusing to users so work around it. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-01-29drm/radeon/DCE4+: clear bios scratch dpms bit (v2)Alex Deucher
The BlankCrtc table in some DCE8 boards has some logic shortcuts for the vbios when this bit is set. Clear it for driver use. v2: fix typo Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-01-29drm/radeon: set si_notify_smc_display_change properlyAlex Deucher
This is effectively a revert of 4573388c92ee60b4ed72b8d95b73df861189988c. Forcing a display active when there is none causes problems with dpm on some SI boards which results in improperly initialized dpm state and boot failures on some boards. As for the bug commit 4573388c92ee tried to address, one can manually force the state to high for better performance when using the card as a headless compute node until a better fix is developed. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=73788 https://bugs.freedesktop.org/show_bug.cgi?id=69395 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> cc: stable@vger.kernel.org
2014-01-29bcache: bugfix - gc thread now gets woken when cache is fullNicholas Swenson
Signed-off-by: Nicholas Swenson <nks@daterainc.com>
2014-01-29bcache: Minor fixes from kbuild robotKent Overstreet
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-29bcache: fix BUG_ON due to integer overflow with GC_SECTORS_USEDDarrick J. Wong
The BUG_ON at the end of __bch_btree_mark_key can be triggered due to an integer overflow error: BITMASK(GC_SECTORS_USED, struct bucket, gc_mark, 2, 13); ... SET_GC_SECTORS_USED(g, min_t(unsigned, GC_SECTORS_USED(g) + KEY_SIZE(k), (1 << 14) - 1)); BUG_ON(!GC_SECTORS_USED(g)); In bcache.h, the SECTORS_USED bitfield is defined to be 13 bits wide. While the SET_ code tries to ensure that the field doesn't overflow by clamping it to (1<<14)-1 == 16383, this is incorrect because 16383 requires 14 bits. Therefore, if GC_SECTORS_USED() + KEY_SIZE() = 8192, the SET_ statement tries to store 8192 into a 13-bit field. In a 13-bit field, 8192 becomes zero, thus triggering the BUG_ON. Therefore, create a field width constant and a max value constant, and use those to create the bitfield and check the inputs to SET_GC_SECTORS_USED. Arguably the BITMASK() template ought to have BUG_ON checks for too-large values, but that's a separate patch. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2014-01-29drm/radeon: fix DAC interrupt handling on DCE5+Alex Deucher
DCE5 and newer hardware only has 1 DAC. Use the correct offset. This may fix display problems on certain board configurations. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-01-29drm/radeon: clean up active vram sizingAlex Deucher
If we are not able to properly initialize one of the gpu engines for buffer paging, we limit vram to the size of the cpu visible aperture. We generally either use the gfx or dma engine to do this. Clean up the size limiting code to only adjust the size based on what ring is selected for buffer paging rather than making assumptions about which engine is selected for paging. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2014-01-29drm/radeon: skip async dma init on r6xxAlex Deucher
The hw is buggy and it's not currently used, but it's currently still initialized by the driver. Skip the init. Skipping init also seems to improve stability with dpm on some r6xx asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=66963 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2014-01-29drm/radeon/runpm: don't runtime suspend non-PX cardsAlex Deucher
Prevent runtime suspend of non-PX GPUs. Runtime suspend is not what we want in those cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-01-29drm/radeon: add ring to fence trace functionsChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-29drm/radeon: add missing trace pointChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-29drm/radeon: fix VMID use trackingChristian König
Otherwise we allocate a new VMID on nearly every submit. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-29Update Jean Delvare's e-mail addressJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29hwmon: (it87) Print proper names for the IT8771E and IT8772EJean Delvare
The driver prints IT8771F and IT8772F instead of IT8771E and IT8772E respectively when the driver is loaded. This is a cosmetic only bug but let's fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29hwmon: (it87) Add support for the ITE IT8603ERudolf Marek
Add support for IT8603E. This closes bug #57861: https://bugzilla.kernel.org/show_bug.cgi?id=57861 [JD: Fixes and clean-ups.] Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29can: janz-ican3: fix uninitialized variable warningsIra W. Snyder
Analysis of the code shows that the struct ican3_msg variable cannot be used uninitialized. Error conditions are checked and the loop terminates before calling the ican3_handle_message() function with an uninitialized value. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-01-29can: flexcan: fix flexcan driver build for big endian on ARM and little ↵Arnd Bergmann
endian on PowerPc There is no reason to disallow building the driver on big-endian ARM kernels. Furthermore, the current behavior is actually broken on little-endian PowerPC as well. The choice of register accessor functions must purely depend on the CPU architecture, not which endianess the CPU is running on. Note that we nowadays allow both big-endian ARM and little-endian PowerPC kernels. With this patch applied, we will do the right thing in all four combinations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-01-29ATA: SATA_MV: Add missing Kconfig select statememntAndrew Lunn
SATA_MV depends on GENERIC_PHY. So if SATA_MV is built in, GENERIC_PHY cannot be modular. Fixes build error found by kbuild test robot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-29ata: pata_imx: Check the return value from clk_prepare_enable()Fabio Estevam
clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-29NVMe: Correct uses of INIT_WORKMatthew Wilcox
We need to initialise the work_struct when we initialise the rest of the struct nvme_dev, otherwise we'll hit a lockdep warning when we remove the device. Use PREPARE_WORK to change the function pointer instead of INIT_WORK. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-01-29dmaengine: mmp_pdma: fix mismergeArnd Bergmann
The merge between 2b7f65b11d87f "mmp_pdma: Style neatening" and 8010dad55a0ab0 "dma: add dma_get_any_slave_channel(), for use in of_xlate()" caused a build error by leaving obsolete code in place: mmp_pdma.c: In function 'mmp_pdma_dma_xlate': mmp_pdma.c:909:31: error: 'candidate' undeclared mmp_pdma.c:912:3: error: label 'retry' used but not defined mmp_pdma.c:901:24: warning: unused variable 'c' [-Wunused-variable] This removes the extraneous lines. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-29Merge branches 'pm-cpufreq' and 'pm-devfreq'Rafael J. Wysocki
* pm-cpufreq: acpi-cpufreq: De-register CPU notifier and free struct msr on error. * pm-devfreq: PM / devfreq: Disable Exynos4 driver build on multiplatform
2014-01-29Merge branches 'acpi-processor', 'acpi-hotplug', 'acpi-init', 'acpi-pm' and ↵Rafael J. Wysocki
'acpica' * acpi-processor: ACPI / scan: reduce log level of "ACPI: \_PR_.CPU4: failed to get CPU APIC ID" ACPI / processor: Return specific error value when mapping lapic id * acpi-hotplug: ACPI / scan: Clear match_driver flag in acpi_bus_trim() * acpi-init: ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API * acpi-pm: ACPI / PM: Use ACPI_COMPANION() to get ACPI companions of devices * acpica: ACPICA: Remove bool usage from ACPICA.
2014-01-29ACPI / scan: Clear match_driver flag in acpi_bus_trim()Rafael J. Wysocki
Drivers should not bind to struct acpi_device objects that acpi_bus_trim() has been called for, so make that function clear flags.match_driver for those objects. If that is not done, an ACPI driver may theoretically try to operate a device that is not physically present. Fixes: 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2014-01-29qeth: fix build of s390 allmodconfigEugene Crosser
commit 949efd1c "qeth: bridgeport support - basic control" broke s390 allmodconfig. This patch fixes this by eliminating one of the cross-module calls, and by making two other calls via function pointers in the qeth_discipline structure. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-29s390/qdio: correct program-controlled interruption checkingUrsula Braun
Get rid of compile warning in qdio_int_handler_pci() when checking for program-controlled interruption on outbound queues. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-01-29s390/qdio: for_each macro correctnessJose Alonso
I observed that there are for_each macros that do an extra memory access beyond the defined area. Normally this does not cause problems. But, this can cause exceptions. For example: if the area is allocated at the end of a page and the next page is not accessible. For correctness, I suggest changing the arguments of the 'for loop' like others 'for_each' do in the kernel. Signed-off-by: Jose Alonso <joalonsof@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>