summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2014-01-23Merge commit 'spi/fix/rcar' into spi-linusMark Brown
2014-01-23Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/qspi', ↵Mark Brown
'spi/topic/s3c24xx', 'spi/topic/s3c64xx', 'spi/topic/sh', 'spi/topic/tegra114', 'spi/topic/tegra20-sflash', 'spi/topic/tegra20-slink', 'spi/topic/txx9' and 'spi/topic/xcomm' into spi-linus
2014-01-23Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/gpio', ↵Mark Brown
'spi/topic/hspi', 'spi/topic/mpc512x', 'spi/topic/msiof', 'spi/topic/nuc900', 'spi/topic/oc-tiny', 'spi/topic/omap', 'spi/topic/orion' and 'spi/topic/pci' into spi-linus
2014-01-23Merge remote-tracking branches 'spi/topic/bcm2835', 'spi/topic/bcm63xx', ↵Mark Brown
'spi/topic/bcm63xx-hsspi', 'spi/topic/bitbang', 'spi/topic/bpw', 'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/davinci', 'spi/topic/dw' and 'spi/topic/falcon' into spi-linus
2014-01-23Merge remote-tracking branches 'spi/fix/bcm63xx', 'spi/fix/dspi', ↵Mark Brown
'spi/fix/hspi', 'spi/fix/imx', 'spi/fix/msiof', 'spi/fix/pxa2xx', 'spi/fix/qspi', 'spi/topic/altera', 'spi/topic/ath79' and 'spi/topic/atmel' into spi-linus
2014-01-23Merge remote-tracking branch 'spi/topic/core' into spi-linusMark Brown
2014-01-23Merge remote-tracking branch 'spi/fix/core' into spi-linusMark Brown
2014-01-23bcma: gpio: add own IRQ domainRafał Miłecki
Input GPIO changes can generate interrupts, but we need kind of ACK for them by changing IRQ polarity. This is required to stop hardware from keep generating interrupts and generate another one on the next GPIO state change. This code allows using GPIOs with standard interrupts and add for example GPIO buttons support. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6216/
2014-01-23tty: serial: bcm63xx_uart: use linux/serial_bcm63xx.hFlorian Fainelli
Now that the UART block defines have been moved to a separate file, include that one and do not longer rely on the MIPS-specific bcm63xx_regs.h header file. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6204/
2014-01-23tty: serial: bcm63xx_uart: drop bcm_{readl,writel} macrosFlorian Fainelli
bcm_{readl,writel} macros expand to __raw_{readl,writel}, use these directly such that we do not rely on the platform to provide these for us. As a result, we no longer use bcm63xx_io.h, so remove that inclusion too. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6201/
2014-01-23tty: serial: bcm63xx_uart: remove unused inclusionFlorian Fainelli
bcm63xx_irqs.h is included but we are not using anything from it, drop that include. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6205/
2014-01-23Merge remote-tracking branches 'regulator/topic/s2mps11', ↵Mark Brown
'regulator/topic/s5m8767', 'regulator/topic/stw481x-vmmc', 'regulator/topic/tps51632', 'regulator/topic/tps62360', 'regulator/topic/tps65910', 'regulator/topic/twl' and 'regulator/topic/wm831x' into regulator-linus
2014-01-23Merge remote-tracking branches 'regulator/topic/db8500', ↵Mark Brown
'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp3972', 'regulator/topic/max14577', 'regulator/topic/max77693', 'regulator/topic/mc13892', 'regulator/topic/pcf50633' and 'regulator/topic/pfuze100' into regulator-linus
2014-01-23Merge remote-tracking branches 'regulator/fix/pfuze100', ↵Mark Brown
'regulator/fix/s5m8767', 'regulator/topic/ab8500', 'regulator/topic/act8865', 'regulator/topic/anatop', 'regulator/topic/arizona' and 'regulator/topic/as3722' into regulator-linus
2014-01-23Merge remote-tracking branch 'regulator/topic/core' into regulator-linusMark Brown
2014-01-23regulator: pfuze100-regulator: Improve dev_info() messageFabio Estevam
'lay' is not very meaningful, so use it 'layer' instead to let the dev_info() clearer. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23drm/i915: VLV2 - Fix hotplug detect bitsTodd Previte
Add new definitions for hotplug live status bits for VLV2 since they're in reverse order from the gen4x ones. Changelog: - Restored gen4 bit definitions - Added new definitions for VLV2 - Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct bit defintions - Replaced a lost trailing brace for the added switch() Signed-off-by: Todd Previte <tprevite@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951 [danvet: Switch to _VLV postfix instead of prefix and regroupg comments again so that the g4x warning is right next to those defines. Also add a _G4X suffix for those special ones. Also cc stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-23Merge tag 'kvm-s390-20140117' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-queue This deals with 2 guest features that need enablement in the kvm host: - transactional execution - lpp sampling support In addition there is also a fix to the virtio-ccw guest driver. This will enable future features
2014-01-22Merge branch 'ip-roce' into for-nextRoland Dreier
Conflicts: drivers/infiniband/hw/mlx4/main.c
2014-01-22Merge branches 'cma', 'cxgb4', 'flowsteer', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier
'ocrdma', 'qib', 'srp' and 'usnic' into for-next
2014-01-22IB/mlx5: Verify reserved fields are clearedEli Cohen
Verify that reserved fields in struct mlx5_ib_resize_cq are cleared before continuing execution of the verb. This is required to allow making use of this area in future revisions. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Abort driver cleanup if teardown hca failsEli Cohen
Do not continue with cleanup flow. If this ever happens we can check which resources remained open. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Allow creation of QPs with zero-length work queuesEli Cohen
The current code attmepts to call ib_umem_get() even if the length is zero, which causes a failure. Since the spec allows zero length work queues, change the code so we don't call ib_umem_get() in those cases. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Fix PowerPC supportEli Cohen
1. Fix derivation of sub-page index from the dma address in free_4k. 2. Fix the DMA address passed to dma_unmap_page by masking it properly. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Improve debugfs readabilityEli Cohen
Use strings to display transport service or state of QPs. Use numeric value for MTU of a QP. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Add support for resize CQEli Cohen
Implement resize CQ which is a mandatory verb in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Implement modify CQEli Cohen
Modify CQ is used by ULPs like IPoIB to change moderation parameters. This patch adds support in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Make sure doorbell record is visible before doorbellEli Cohen
Put a wmb() to make sure the doorbell record is visible to the HCA before we hit doorbell. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Use mlx5 core style warningEli Cohen
Use mlx5_core_warn(), which is the standard warning emitter function, instead of pr_warn(). Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Clear out struct before create QP commandEli Cohen
Output structs are expected by firmware to be cleared when a command is called. Clear the "out" struct instead of "dout" which is used only later. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Fix out arg size in access_register commandHaggai Eran
The output size should be the sum of the core access reg output struct plus the size of the specific register data provided by the caller. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22RDMA/nes: Slight optimization of Ethernet address compareDing Tianhong
Use the possibly more efficient ether_addr_equal() instead of memcmp(). Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/qib: Fix QP check when looping back to/from QP1Ira Weiny
The GSI QP type is compatible with and should be allowed to send data to/from any UD QP. This was found when testing ibacm on the same node as an SA. Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22RDMA/cxgb4: Fix gcc warning on 32-bit archPaul Bolle
Building mem.o for 32 bits x86 triggers a GCC warning: drivers/infiniband/hw/cxgb4/mem.c: In function '_c4iw_write_mem_dma_aligned': drivers/infiniband/hw/cxgb4/mem.c:79:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Silence that warning by casting "&wr_wait" to unsigned long before casting it to __be64. That's what _c4iw_write_mem_inline() already does. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/usnic: Remove unused includes of <linux/version.h>Wei Yongjun
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22RDMA/amso1100: Add check if cache memory was allocated before freeing itSvetlana Mavrina
There is a path in handle_vq() where kmem_cache_free() can be called with pointer to a local variable. It can happen if vq_repbuf_alloc() failed to allocate memory from cache and req is NULL. The patch adds check if cache memory was allocated before freeing it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Svetlana Mavrina <another.karnil@gmail.com> Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IPoIB: Report operstate consistently when brought up without a linkMichal Schmidt
After booting without a working link, "ip link" shows: 5: mlx4_ib1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2044 qdisc pfifo_fast state DOWN qlen 256 ... 7: mlx4_ib1.8003@mlx4_ib1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2044 qdisc pfifo_fast state DOWN qlen 256 ... Then after connecting and disconnecting the link, which should result in exactly the same state as before, it shows: 5: mlx4_ib1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2044 qdisc pfifo_fast state DOWN qlen 256 ... 7: mlx4_ib1.8003@mlx4_ib1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2044 qdisc pfifo_fast state LOWERLAYERDOWN qlen 256 ... Notice the (now correct) LOWERLAYERDOWN operstate shown for the mlx4_ib1.8003 interface. Ideally the identical state would be shown right after boot. The problem is related to the calling of netif_carrier_off() in network drivers. For a long time it was known that doing netif_carrier_off() before registering the netdevice would result in the interface's operstate being shown as UNKNOWN if the device was brought up without a working link. This problem was fixed in commit 8f4cccbbd92 ('net: Set device operstate at registration time'), but still there remains the minor inconsistency demonstrated above. This patch fixes it by moving ipoib's call to netif_carrier_off() into the .ndo_open method, which is where network drivers ordinarily do it. With the patch when doing the same test as above, the operstate of mlx4_ib1.8003 is shown as LOWERLAYERDOWN right after boot. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/core: Fix unused variable warningOr Gerlitz
Fix the below "make W=1" build warning: drivers/infiniband/core/iwcm.c: In function ‘destroy_cm_id’: drivers/infiniband/core/iwcm.c:330: warning: variable ‘ret’ set but not used Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22RDMA/cma: Handle global/non-linklocal IPv6 addresses in cma_check_linklocal()Somnath Kotur
If addr is not a linklocal address, the code incorrectly fails to return and ends up assigning the scope ID to the scope id of the address, which is wrong. Fix by checking if it's a link local address first, and immediately return 0 if not. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio update from Rusty Russell: "A few simple fixes. Quiet cycle" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: drivers: virtio: Mark function virtballoon_migratepage() as static in virtio_balloon.c virtio-scsi: Fix hotcpu_notifier use-after-free with virtscsi_freeze virtio: pci: remove unnecessary pci_set_drvdata()
2014-01-22Merge tag 'stable/for-linus-3.14-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from Konrad Rzeszutek Wilk: "Two major features that Xen community is excited about: The first is event channel scalability by David Vrabel - we switch over from an two-level per-cpu bitmap of events (IRQs) - to an FIFO queue with priorities. This lets us be able to handle more events, have lower latency, and better scalability. Good stuff. The other is PVH by Mukesh Rathor. In short, PV is a mode where the kernel lets the hypervisor program page-tables, segments, etc. With EPT/NPT capabilities in current processors, the overhead of doing this in an HVM (Hardware Virtual Machine) container is much lower than the hypervisor doing it for us. In short we let a PV guest run without doing page-table, segment, syscall, etc updates through the hypervisor - instead it is all done within the guest container. It is a "hybrid" PV - hence the 'PVH' name - a PV guest within an HVM container. The major benefits are less code to deal with - for example we only use one function from the the pv_mmu_ops (which has 39 function calls); faster performance for syscall (no context switches into the hypervisor); less traps on various operations; etc. It is still being baked - the ABI is not yet set in stone. But it is pretty awesome and we are excited about it. Lastly, there are some changes to ARM code - you should get a simple conflict which has been resolved in #linux-next. In short, this pull has awesome features. Features: - FIFO event channels. Key advantages: support for over 100,000 events (2^17), 16 different event priorities, improved fairness in event latency through the use of FIFOs. - Xen PVH support. "It’s a fully PV kernel mode, running with paravirtualized disk and network, paravirtualized interrupts and timers, no emulated devices of any kind (and thus no qemu), no BIOS or legacy boot — but instead of requiring PV MMU, it uses the HVM hardware extensions to virtualize the pagetables, as well as system calls and other privileged operations." (from "The Paravirtualization Spectrum, Part 2: From poles to a spectrum") Bug-fixes: - Fixes in balloon driver (refactor and make it work under ARM) - Allow xenfb to be used in HVM guests. - Allow xen_platform_pci=0 to work properly. - Refactors in event channels" * tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (52 commits) xen/pvh: Set X86_CR0_WP and others in CR0 (v2) MAINTAINERS: add git repository for Xen xen/pvh: Use 'depend' instead of 'select'. xen: delete new instances of __cpuinit usage xen/fb: allow xenfb initialization for hvm guests xen/evtchn_fifo: fix error return code in evtchn_fifo_setup() xen-platform: fix error return code in platform_pci_init() xen/pvh: remove duplicated include from enlighten.c xen/pvh: Fix compile issues with xen_pvh_domain() xen: Use dev_is_pci() to check whether it is pci device xen/grant-table: Force to use v1 of grants. xen/pvh: Support ParaVirtualized Hardware extensions (v3). xen/pvh: Piggyback on PVHVM XenBus. xen/pvh: Piggyback on PVHVM for grant driver (v4) xen/grant: Implement an grant frame array struct (v3). xen/grant-table: Refactor gnttab_init xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init. xen/pvh: Piggyback on PVHVM for event channels (v2) xen/pvh: Update E820 to work with PVH (v2) xen/pvh: Secondary VCPU bringup (non-bootup CPUs) ...
2014-01-22team: Don't allow team devices to change network namespaces.Weilong Chen
Like bonding, team as netdevice doesn't cross netns boundaries. Team ports and team itself live in same netns. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: Don't allow bond devices to change network namespaces.Weilong Chen
Like bridge, bonding as netdevice doesn't cross netns boundaries. Bonding ports and bonding itself live in same netns. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert netlink to use slave data info apiJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22rtnetlink: put "BOND" into nl attribute names which are related to bondingJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: change name of sysfs dir for bonding slavesJiri Pirko
Allow user to identify easily what the attributes are related to. Change the name of the group to "bonding_slave" to be similar to master which is named "bonding". Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22tuntap: Fix for a race in accessing numqueuesDominic Curran
A patch for fixing a race between queue selection and changing queues was introduced in commit 92bb73ea2("tuntap: fix a possible race between queue selection and changing queues"). The fix was to prevent the driver from re-reading the tun->numqueues more than once within tun_select_queue() using ACCESS_ONCE(). We have been experiancing 'Divide-by-zero' errors in tun_net_xmit() since we moved from 3.6 to 3.10, and believe that they come from a simular source where the value of tun->numqueues changes to zero between the first and a subsequent read of tun->numqueues. The fix is a simular use of ACCESS_ONCE(), as well as a multiply instead of a divide in the if statement. Signed-off-by: Dominic Curran <dominic.curran@citrix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - quite some work on hid-sony driver in order to have DualShock 4 device properly supported, from Frank Praznik - fixed support for suspending I2C conntected devices, from Mika Westerberg - regression fix for 0xff05 usage on Microsoft Ergonomy, from Jiri Kosina - support for Synaptics HD touchscreen, from AceLan Kao - workaround for USB 3.0 problem for logitech-dj connected devices, from Benjamin Tisssoires - support for Logitech Dual Action pads, from Vitaly Katraew - quite a few other assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits) HID: sony: Use colors for the Dualshock 4 LED names HID: sony: Add annotated HID descriptor for the Dualshock 4 HID: sony: Cache the output report for the Dualshock 4 HID: sony: Map gyroscopes and accelerometers to axes HID: sony: Fix spacing in the device definitions. HID: sony: Use standard output reports instead of raw reports to send data to the Dualshock 4. HID: sony: Use separate identifiers for USB and Bluetooth connected Dualshock 4 controllers. HID: hid-holtek-mouse: add new a070 mouse HID: hid-sensor-hub: Fix buggy report descriptors HID: logitech-dj: Fix USB 3.0 issue HID: sony: Rename worker function HID: sony: Add LED controls for the Dualshock 4 HID: sony: Add force-feedback support for the Dualshock 4 HID: hidraw: make comment more accurate and nicer HID: sony: fix error return code HID: input: fix input sysfs path for hid devices HID: debug: add labels for some new buttons HID: remove SIS entries from hid_have_special_driver[] HID: microsoft: no fallthrough in MS ergonomy 0xff05 usage HID: add support for SiS multitouch panel in the touch monitor LG 23ET83V ...
2014-01-22Merge tag 'dm-3.14-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device-mapper changes from Mike Snitzer: "A lot of attention was paid to improving the thin-provisioning target's handling of metadata operation failures and running out of space. A new 'error_if_no_space' feature was added to allow users to error IOs rather than queue them when either the data or metadata space is exhausted. Additional fixes/features include: - a few fixes to properly support thin metadata device resizing - a solution for reliably waiting for a DM device's embedded kobject to be released before destroying the device - old dm-snapshot is updated to use the dm-bufio interface to take advantage of readahead capabilities that improve snapshot activation - new dm-cache target tunables to control how quickly data is promoted to the cache (fast) device - improved write efficiency of cluster mirror target by combining userspace flush and mark requests" * tag 'dm-3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits) dm log userspace: allow mark requests to piggyback on flush requests dm space map metadata: fix bug in resizing of thin metadata dm cache: add policy name to status output dm thin: fix pool feature parsing dm sysfs: fix a module unload race dm snapshot: use dm-bufio prefetch dm snapshot: use dm-bufio dm snapshot: prepare for switch to using dm-bufio dm snapshot: use GFP_KERNEL when initializing exceptions dm cache: add block sizes and total cache blocks to status output dm btree: add dm_btree_find_lowest_key dm space map metadata: fix extending the space map dm space map common: make sure new space is used during extend dm: wait until embedded kobject is released before destroying a device dm: remove pointless kobject comparison in dm_get_from_kobject dm snapshot: call destroy_work_on_stack() to pair with INIT_WORK_ONSTACK() dm cache policy mq: introduce three promotion threshold tunables dm cache policy mq: use list_del_init instead of list_del + INIT_LIST_HEAD dm thin: fix set_pool_mode exposed pool operation races dm thin: eliminate the no_free_space flag ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 02:08:51 +0000