summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2012-01-18Merge branch 'atomicio-remove' into releaseLen Brown
2012-01-18Merge branch 'apei' into releaseLen Brown
2012-01-17ACPI APEI: Convert atomicio routinesMyron Stowe
APEI needs memory access in interrupt context. The obvious choice is acpi_read(), but originally it couldn't be used in interrupt context because it makes temporary mappings with ioremap(). Therefore, we added drivers/acpi/atomicio.c, which provides: acpi_pre_map_gar() -- ioremap in process context acpi_atomic_read() -- memory access in interrupt context acpi_post_unmap_gar() -- iounmap Later we added acpi_os_map_generic_address() (2971852) and enhanced acpi_read() so it works in interrupt context as long as the address has been previously mapped (620242a). Now this sequence: acpi_os_map_generic_address() -- ioremap in process context acpi_read()/apei_read() -- now OK in interrupt context acpi_os_unmap_generic_address() is equivalent to what atomicio.c provides. This patch introduces apei_read() and apei_write(), which currently are functional equivalents of acpi_read() and acpi_write(). This is mainly proactive, to prevent APEI breakages if acpi_read() and acpi_write() are ever augmented to support the 'bit_offset' field of GAS, as APEI's __apei_exec_write_register() precludes splitting up functionality related to 'bit_offset' and APEI's 'mask' (see its APEI_EXEC_PRESERVE_REGISTER block). With apei_read() and apei_write() in place, usages of atomicio routines are converted to apei_read()/apei_write() and existing calls within osl.c and the CA, based on the re-factoring that was done in an earlier patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2: acpi_pre_map_gar() --> acpi_os_map_generic_address() acpi_post_unmap_gar() --> acpi_os_unmap_generic_address() acpi_atomic_read() --> apei_read() acpi_atomic_write() --> apei_write() Note that acpi_read() and acpi_write() currently use 'bit_width' for accessing GARs which seems incorrect. 'bit_width' is the size of the register, while 'access_width' is the size of the access the processor must generate on the bus. The 'access_width' may be larger, for example, if the hardware only supports 32-bit or 64-bit reads. I wanted to minimize any possible impacts with this patch series so I did *not* change this behavior. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI: Export interfaces for ioremapping/iounmapping ACPI registersMyron Stowe
Export remapping and unmapping interfaces - acpi_os_map_generic_address() and acpi_os_unmap_generic_address() - for ACPI generic registers that are backed by memory mapped I/O (MMIO). The acpi_os_map_generic_address() and acpi_os_unmap_generic_address() declarations may more properly belong in include/acpi/acpiosxf.h next to acpi_os_read_memory() but I believe that would require the ACPI CA making them an official part of the ACPI CA - OS interface. ACPI Generic Address Structure (GAS) reference (ACPI's fixed/generic hardware registers use the GAS format): ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address Structure" Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI: Fix possible alignment issues with GAS 'address' referencesMyron Stowe
Generic Address Structures (GAS) may reside within ACPI tables which are byte aligned. This patch copies GAS 'address' references to a local variable, which will be naturally aligned, to be used going forward. ACPI Generic Address Structure (GAS) reference: ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address Structure" Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, APEI, Resolve false conflict between ACPI NVS and APEIHuang Ying
Some firmware will access memory in ACPI NVS region via APEI. That is, instructions in APEI ERST/EINJ table will read/write ACPI NVS region. The original resource conflict checking in APEI code will check memory/ioport accessed by APEI via general resource management mech. But ACPI NVS region is marked as busy already, so that the false resource conflict will prevent APEI ERST/EINJ to work. To fix this, this patch excludes ACPI NVS regions when APEI components request resources. So that they will not conflict with ACPI NVS regions. Reported-and-tested-by: Pavel Ivanov <paivanof@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, Record ACPI NVS regionsHuang Ying
Some firmware will access memory in ACPI NVS region via APEI. That is, instructions in APEI ERST/EINJ table will read/write ACPI NVS region. The original resource conflict checking in APEI code will check memory/ioport accessed by APEI via general resource management mechanism. But ACPI NVS region is marked as busy already, so that the false resource conflict will prevent APEI ERST/EINJ to work. To fix this, this patch record ACPI NVS regions, so that we can avoid request resources for memory region inside it. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, APEI, EINJ, Refine the fix of resource conflictXiao, Hui
Current fix for resource conflict is to remove the address region <param1 & param2, ~param2+1> from trigger resource, which is highly relies on valid user input. This patch is trying to avoid such potential issues by fetching the exact address region from trigger action table entry. Signed-off-by: Xiao, Hui <hui.xiao@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, APEI, EINJ, Fix resource conflict on some machineHuang Ying
Some APEI firmware implementation will access injected address specified in param1 to trigger the error when injecting memory error. This will cause resource conflict with RAM. On one of our testing machine, if injecting at memory address 0x10000000, the following error will be reported in dmesg: APEI: Can not request iomem region <0000000010000000-0000000010000008> for GARs. This patch removes the injecting memory address range from trigger table resources to avoid conflict. Signed-off-by: Huang Ying <ying.huang@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, Add RAM mapping support to ACPI atomic IO supportHuang Ying
On one of our testing machine, the following EINJ command lines: # echo 0x10000000 > param1 # echo 0xfffffffffffff000 > param2 # echo 0x8 > error_type # echo 1 > error_inject Will get: echo: write error: Input/output error The EIO comes from: rc = apei_exec_pre_map_gars(&trigger_ctx); The root cause is as follow. Normally, ACPI atomic IO support is used to access IO memory. But in EINJ of that machine, it is used to access RAM to trigger the injected error. And the ioremap() called by apei_exec_pre_map_gars() can not map the RAM. This patch add RAM mapping support to ACPI atomic IO support to satisfy EINJ requirement. Signed-off-by: Huang Ying <ying.huang@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, APEI, Printk queued error record before panicHuang Ying
Because printk is not safe inside NMI handler, the recoverable error records received in NMI handler will be queued to be printked in a delayed IRQ context via irq_work. If a fatal error occurs after the recoverable error and before the irq_work processed, we lost a error report. To solve the issue, the queued error records are printked in NMI handler if system will go panic. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, APEI, GHES, Distinguish interleaved error report in kernel logHuang Ying
In most cases, printk only guarantees messages from different printk calling will not be interleaved between each other. But, one APEI GHES hardware error report will involve multiple printk calling, normally each for one line. So it is possible that the hardware error report comes from different generic hardware error source will be interleaved. In this patch, a sequence number is prefixed to each line of error report. So that, even if they are interleaved, they still can be distinguished by the prefixed sequence number. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, APEI, Remove table not found messageHuang Ying
Because APEI tables are optional, these message may confuse users, for example, https://bugs.launchpad.net/ubuntu/+source/linux/+bug/599715 Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, APEI, Print resource errors in conventional formatBjorn Helgaas
Use the normal %pR-like format for MMIO and I/O port ranges. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, APEI, GHES: Add PCIe AER recovery supportHuang Ying
aer_recover_queue() is called when recoverable PCIe AER errors are notified by firmware to do the recovery work. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI, Add 64bit read/write support to atomicio on i386Huang Ying
There is no 64bit read/write support in ACPI atomicio because readq/writeq is used to implement 64bit read/write, but readq/writeq is not available on i386. This patch implement 64bit read/write support in atomicio via two readl/writel. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Update all copyrights to 2012Bob Moore
Update all copyrights to 2012. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Add support for region address conflict checkingLin Ming
Allows drivers to determine if any memory or I/O addresses will conflict with addresses used by ACPI operation regions. Introduces a new interface, acpi_check_address_range. http://marc.info/?t=132251388700002&r=1&w=2 Reported-and-tested-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Update for larger ACPI 5 FADT sizeBob Moore
FADT is now larger than 256 bytes, so all FADT offsets must be changed from 8 bits to 16 bits. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Clean up MakefileLin Ming
Make the various files in alphabetical order to simplify addition of new files. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: Allow _AEI method in walk resourcesZhang Rui
_AEI contains a resource template, this change adds support for the walk resources function. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: Add new predefined namesBob Moore
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: New interface, acpi_buffer_to_resourceBob Moore
This interface converts an AML buffer to an internal ACPI_RESOURCE. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: New interface, acpi_get_event_resourcesBob Moore
Executes _AEI and formats the result, similar to acpi_get_current_resources, etc. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: Support for all new resource descriptorsLin Ming
FixedDMA, GPIO descriptors, SerialBus descriptors Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: Support for GeneralPurposeIo and GenericSerialBus operation regionBob Moore
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: Implement Connection() and AccessAs() changesBob Moore
Support within the interpreter and operation region dispatch. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: New interfaces to allow driver access to AML mutex objectsLin Ming
Adds acpi_acquire_mutex, acpi_release_mutex external interfaces. New file, utxfmutex.c. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: Implement hardware-reduced optionBob Moore
If HW-reduced flag is set in the FADT, do not attempt to access or initialize any ACPI hardware, including SCI and global lock. No FACS will be present. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: Basic support for FADT version 5Bob Moore
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Do not abort table load on invalid space IDBob Moore
Ignore an invalid space ID during a table load. Instead, detect it if a control method attempts access - then abort the method. http://www.acpica.org/bugzilla/show_bug.cgi?id=925 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Add error msg for Index/Bank field registers out-of-rangeBob Moore
Supplement the exception code with an actual message. Found during ACPICA debugging. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Add error msg for unsupported I/O requests (not 8/16/32 bit length)Bob Moore
Found during ACPICA debugging. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Fix to allow region arguments to reference other scopesLin Ming
Allow referenced objects to be in a different scope. http://www.acpica.org/bugzilla/show_bug.cgi?id=937 http://marc.info/?l=linux-acpi&m=131636632718222&w=2 ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110112/nsinit-349) Scope (_SB) { Name (RAMB, 0xDF5A1018) OperationRegion (\RAMW, SystemMemory, RAMB, 0x00010000) } For above ASL code, we need to save scope node(\_SB) to lookup the argument node(\_SB.RAMB). Reported-by: Jim Green <student.northwestern@gmail.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Update for GCC 4Bob Moore
Fixes several issues with GCC 4.6 related to the new checks for unused variables. http://www.acpica.org/bugzilla/show_bug.cgi?id=935 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17Merge branch 'acpica-validate-address-regression' into nextLen Brown
2012-01-17ACPICA: Put back the call to acpi_os_validate_addressLin Ming
The call to acpi_os_validate_address in acpi_ds_get_region_arguments was removed by mistake in commit 9ad19ac(ACPICA: Split large dsopcode and dsload.c files). Put it back. Cc: stable@vger.kernel.org # 2.6.38+ Reported-and-bisected-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fix CAN MAINTAINERS SCM tree type mwifiex: fix crash during simultaneous scan and connect b43: fix regression in PIO case ath9k: Fix kernel panic in AR2427 in AP mode CAN MAINTAINERS update net: fsl: fec: fix build for mx23-only kernel sch_qfq: fix overflow in qfq_update_start() Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"
2012-01-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-01-04Revert "rtc: Expire alarms after the time is set."Linus Torvalds
This reverts commit 93b2ec0128c431148b216b8f7337c1a52131ef03. The call to "schedule_work()" in rtc_initialize_alarm() happens too early, and can cause oopses at bootup Neil Brown explains why we do it: "If you set an alarm in the future, then shutdown and boot again after that time, then you will end up with a timer_queue node which is in the past. When this happens the queue gets stuck. That entry-in-the-past won't get removed until and interrupt happens and an interrupt won't happen because the RTC only triggers an interrupt when the alarm is "now". So you'll find that e.g. "hwclock" will always tell you that 'select' timed out. So we force the interrupt work to happen at the start just in case." and has a patch that convert it to do things in-process rather than with the worker thread, but right now it's too late to play around with this, so we just revert the patch that caused problems for now. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Requested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-03Revert "rtc: Disable the alarm in the hardware"Linus Torvalds
This reverts commit c0afabd3d553c521e003779c127143ffde55a16f. It causes failures on Toshiba laptops - instead of disabling the alarm, it actually seems to enable it on the affected laptops, resulting in (for example) the laptop powering on automatically five minutes after shutdown. There's a patch for it that appears to work for at least some people, but it's too late to play around with this, so revert for now and try again in the next merge window. See for example http://bugs.debian.org/652869 Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra) Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500) Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830) Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> (Toshiba Portege R830) Cc: Jonathan Nieder <jrnieder@gmail.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: stable@kernel.org # for the versions that applied this Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-03mwifiex: fix crash during simultaneous scan and connectAmitkumar Karwar
If 'iw connect' command is fired when driver is already busy in serving 'iw scan' command, ssid specific scan operation for connect is skipped. In this case cmd wait queue handler gets called with no command in queue (i.e. adapter->cmd_queued = NULL). This patch adds a NULL check in mwifiex_wait_queue_complete() routine to fix crash observed during simultaneous scan and assoc operations. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03b43: fix regression in PIO caseGuennadi Liakhovetski
This patch fixes the regression, introduced by commit 17030f48e31adde5b043741c91ba143f5f7db0fd From: Rafał Miłecki <zajec5@gmail.com> Date: Thu, 11 Aug 2011 17:16:27 +0200 Subject: [PATCH] b43: support new RX header, noticed to be used in 598.314+ fw in PIO case. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03ath9k: Fix kernel panic in AR2427 in AP modeMohammed Shafi Shajakhan
don't do aggregation related stuff for 'AP mode client power save handling' if aggregation is not enabled in the driver, otherwise it will lead to panic because those data structures won't be never intialized in 'ath_tx_node_init' if aggregation is disabled EIP is at ath_tx_aggr_wakeup+0x37/0x80 [ath9k] EAX: e8c09a20 EBX: f2a304e8 ECX: 00000001 EDX: 00000000 ESI: e8c085e0 EDI: f2a304ac EBP: f40e1ca4 ESP: f40e1c8c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper/1 (pid: 0, ti=f40e0000 task=f408e860 task.ti=f40dc000) Stack: 0001e966 e8c09a20 00000000 f2a304ac e8c085e0 f2a304ac f40e1cb0 f8186741 f8186700 f40e1d2c f922988d f2a304ac 00000202 00000001 c0b4ba43 00000000 0000000f e8eb75c0 e8c085e0 205b0001 34383220 f2a304ac f2a30000 00010020 Call Trace: [<f8186741>] ath9k_sta_notify+0x41/0x50 [ath9k] [<f8186700>] ? ath9k_get_survey+0x110/0x110 [ath9k] [<f922988d>] ieee80211_sta_ps_deliver_wakeup+0x9d/0x350 [mac80211] [<c018dc75>] ? __module_address+0x95/0xb0 [<f92465b3>] ap_sta_ps_end+0x63/0xa0 [mac80211] [<f9246746>] ieee80211_rx_h_sta_process+0x156/0x2b0 [mac80211] [<f9247d1e>] ieee80211_rx_handlers+0xce/0x510 [mac80211] [<c018440b>] ? trace_hardirqs_on+0xb/0x10 [<c056936e>] ? skb_queue_tail+0x3e/0x50 [<f9248271>] ieee80211_prepare_and_rx_handle+0x111/0x750 [mac80211] [<f9248bf9>] ieee80211_rx+0x349/0xb20 [mac80211] [<f9248949>] ? ieee80211_rx+0x99/0xb20 [mac80211] [<f818b0b8>] ath_rx_tasklet+0x818/0x1d00 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187b33>] ath9k_tasklet+0xf3/0x1c0 [ath9k] [<c0151b7e>] tasklet_action+0xbe/0x180 Cc: stable@kernel.org Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Reported-by: Ashwin Mendonca <ashwinloyal@gmail.com> Tested-by: Ashwin Mendonca <ashwinloyal@gmail.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03net: fsl: fec: fix build for mx23-only kernelWolfram Sang
If one only selects mx23-based boards, compile fails: drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function) drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function) This is because fec.h uses CONFIG_SOC_IMX28 to determine the register layout of the core which makes sense since the MX23 does not have a fec. However, Kconfig uses the broader ARCH_MXS symbol and this way even makes the fec-driver default for MX23. Adapt Kconfig to use the more precise SOC_IMX28 as well. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: David S. Miller <davem@davemloft.net> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03drm/radeon/kms/atom: fix possible segfault in pm setupAlexander Müller
If we end up with no power states, don't look up current vddc. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44130 agd5f: fix patch formatting Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-02Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: dt/device: Fix auxdata matching to handle entries without a name override
2012-01-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ctnetlink: fix timeout calculation ipvs: try also real server with port 0 in backup server skge: restore rx multicast filter on resume and after config changes mlx4_en: nullify cq->vector field when closing completion queue
2011-12-31gspca: Fix falling back to lower isoc alt settingsMauro Carvalho Chehab
The current gspca core code has a regression where it no longer properly falls back to lower alt settings when there is not enough bandwidth. This causes many iso based usb-1 cameras to not work when plugged into a usb2 hub or a sandybridge chipset motherboard! This patch fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-30skge: restore rx multicast filter on resume and after config changesFlorian Zumbiehl
Restore skge hardware registers for multicast filtering to their appropriate values after system resume and after hardware restarts that are done when changing certain settings. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-10 20:55:53 +0000