summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-11-18team: replace kmalloc+memcpy by kmemdupJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18team: avoid using variable-length arrayJiri Pirko
Apparently using variable-length array is not correct (https://lkml.org/lkml/2011/10/23/25). So remove it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18team: add fix_featuresJiri Pirko
do fix features in similar way as bonding code does Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18net-forcedeth: fix possible stats inaccuracies on 32b hostsdavid decotigny
The software stats are updated from BH, this change ensures that 32b UP hosts use appropriate protection. Tested: - HW/SW stats consistent with pktgen (in particular tx=rx) - HW/SW stats consistent when tx/rx offloads disabled - no problem with+without lockdep (SMP 16-way) Signed-off-by: David Decotigny <david.decotigny@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18bnx2: switch to build_skb() infrastructureEric Dumazet
This is very similar to bnx2x conversion, but bnx2 only requires 16bytes alignement at start of the received frame to store its l2_fhdr, so goal was not to reduce skb truesize (in fact it should not change after this patch) Using build_skb() reduces cache line misses in the driver, since we use cache hot skb instead of cold ones. Number of in-flight sk_buff structures is lower, they are more likely recycled in SLUB caches while still hot. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael Chan <mchan@broadcom.com> CC: Eilon Greenstein <eilong@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17ibm/emac: fix improper cleanup when device is removed to allow re-bindWolfgang Grandegger
The re-binding (unbind..bind) of an EMAC device fails because the static variable "busy_phy_map" is not updated when the device is removed. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: include/net/bluetooth/bluetooth.h
2011-11-16forcedeth: stats updated with a deferrable timerdavid decotigny
Mark stats timer as deferrable: punctuality in waking the stats timer callback doesn't matter much, as it is responsible only to avoid integer wraparound. We need at least 1 other timer to fire within 17s (fully loaded 1Gbps) to avoid wrap-arounds. Desired period is still 10s. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16forcedeth: account for dropped RX framesdavid decotigny
This adds code to update the stats counter for dropped RX frames. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16forcedeth: implement ndo_get_stats64() APIdavid decotigny
This commit implements the ndo_get_stats64() API for forcedeth. Since hardware stats are being updated from different contexts (process and timer), this commit adds synchronization. For software stats, it relies on the u64_stats_sync.h API. Tested: - 16-way SMP x86_64 -> RX bytes:7244556582 (7.2 GB) TX bytes:181904254 (181.9 MB) - pktgen + loopback: identical rx_bytes/tx_bytes and rx_packets/tx_packets Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16forcedeth: allow to silence "TX timeout" debug messagesSameer Nanda
This adds a new module parameter "debug_tx_timeout" to silence most debug messages in case of TX timeout. These messages don't provide a signal/noise ratio high enough for production systems and, with ~30kB logged each time, they tend to add to a cascade effect if the system is already under stress (memory pressure, disk, etc.). By default, the parameter is clear, meaning that only a single warning will be reported. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16forcedeth: Add messages to indicate using MSI or MSI-XMike Ditto
This adds a few kernel messages to indicate whether PCIe interrupts are signaled with MSI or MSI-X. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16forcedeth: fix stats on hardware without extended stats supportdavid decotigny
This change makes sure that tx_packets/rx_bytes ifconfig counters are updated even on NICs that don't provide hardware support for these stats: they are now updated in software. For the sake of consistency, we also now have tx_bytes updated in software (hardware counters include ethernet CRC, and software doesn't account for it). This reverts parts of: - "forcedeth: statistics optimization" (21828163b2) - "forcedeth: Improve stats counters" (0bdfea8ba8) - "forcedeth: remove unneeded stats updates" (4687f3f364) Tested: pktgen + loopback (http://patchwork.ozlabs.org/patch/124698/) reports identical tx_packets/rx_packets and tx_bytes/rx_bytes. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 898bdf2cb43eb0a962c397eb4dd1aec2c7211be2)
2011-11-16net: drivers: use bool type instead of double negationMichał Mirosław
Save some punctuation by using bool type's property equivalent to doubled negation operator. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16ucc_geth: Convert ENET_NUM_OCTETS_PER_ADDRESS uses to ETH_ALENJoe Perches
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16amd8111e: Convert ETH_ADDR_LEN uses to ETH_ALENJoe Perches
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16bna: Convert MAC_ADDRLEN uses to ETH_ALENJoe Perches
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16ethernet: Convert ETHER_ADDR_LEN uses to ETH_ALENJoe Perches
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16ethernet: Convert MAC_ADDR_LEN uses to ETH_ALENJoe Perches
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: Add ethtool to mii advertisment conversion helpersMatt Carlson
Translating between ethtool advertisement settings and MII advertisements are common operations for ethernet drivers. This patch adds a set of helper functions that implements the conversion. The patch then modifies a couple of the drivers to use the new functions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
2011-11-16team: replicate options on registerJiri Pirko
Since multiple team instances are putting defined options into their option list, during register each option must be cloned before added into list. This resolves uncool memory corruptions when using multiple teams. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16team: convert overall spinlock to mutexJiri Pirko
No need to have spinlock for this purpose. So convert this to mutex and avoid current schedule while atomic problems in netlink code. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16team: Do not hold rcu_read_lock when running netlink cmdsJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16be2net: Use V1 query link status command for lancerPadmanabh Ratnakar
Use V1 version of query link status command for Lancer. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16be2net: Fix VLAN promiscous mode for LancerPadmanabh Ratnakar
To enable VLAN promiscous mode, the HW interface should be created with VLAN promiscous capability in Lancer. Add this capability during creation of the HW interface. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16be2net: Add EEPROM dump feature for LancerPadmanabh Ratnakar
Implemented eeprom dump using ethtool feature for Lancer. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16be2net: add register dump feature for LancerPadmanabh Ratnakar
Implement register dump using ethtool for Lancer. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16be2net: Fix TX queue create for LancerPadmanabh Ratnakar
Lancer uses V1 version of TXQ create. This command needs interface id for TX queue creation. Rearrange code such that tx queue create is after interface create. As TXQ create is now called after MCC ring create use MCC instead of MBOX. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16infiniband: Update net drivers for netdev_features_t changes.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: remove NETIF_F_NO_CSUM feature bitMichał Mirosław
Only distinct use is checking if NETIF_F_NOCACHE_COPY should be enabled by default. The check heuristics is altered a bit here, so it hits other people than before. The default shouldn't be trusted for performance-critical cases anyway. For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: sweep-up some straglers in strlcpy conversion of .get_drvinfo routinesRick Jones
Convert some remaining straglers' .get_drvinfo routines to use strlcpy rather than strcpy/strncpy. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16enable virtio_net to return bus_info in ethtool -i consistent with emulated NICsRick Jones
Add a new .bus_name to virtio_config_ops then modify virtio_net to call through to it in an ethtool .get_drvinfo routine to report bus_info in ethtool -i output which is consistent with other emulated NICs and the output of lspci. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16intel: Convert <FOO>_LENGTH_OF_ADDRESS to ETH_ALENJoe Perches
Use the normal #defines not module specific ones. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-16igb: Convert bare printk to pr_noticeJoe Perches
printks should use KERN_ levels. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-16igb: Convert printks to pr_<level>Jeff Kirsher
Based on original patch from Joe Perches <joe@perches.com> Use the current logging styles. pr_<level> conversions are now prefixed with "igb: " Correct a defect where the trailing NTU may have been printed on a separate line because of an interleaving hex_dump. Remove unnecessary uses of KERN_CONT and use single pr_info()s to avoid any possible output interleaving from other modules. Coalesce formats as appropriate. -v2 fix-up to make checkpatch.pl compliant and remove change to the copyright line CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2011-11-16ixgbevf: Convert printks to pr_<level>Jeff Kirsher
Based on the original patch from Joe Perches <joe@perches.com> Use the current logging styles, prefix output with "ixgbevf: " Add #define pr_fmt Coalesce formats. -v2 Fix-up to make checkpatch.pl compliant and remove change to copyright line CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Sibai Li <sibai.li@intel.com>
2011-11-16igbvf: Convert printks to pr_<level>Jeff Kirsher
Based on the previous patch from Joe Perches <joe@perches.com> Use current logging styles. Prefix all output via #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Neaten link status dev_info. -v2 Remove Copyright changes and fix-up patch to make it checkpatch.pl compliant. CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Sibai Li <sibai.li@intel.com>
2011-11-16ixgbe: fix LED blink logic to check for linkEmil Tantilov
Previously the driver would force link without checking whether the link was already established. This caused some inconsistencies in the LED blink rate. Do not force link if link is already up. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-16e1000e: Convert printks to pr_<level>Jeff Kirsher
Based on the original patch from Joe Perches. Use the current logging styles. pr_<level> conversions are now prefixed with "e1000e:" Correct a couple of defects where the trailing NTU may have been printed on a separate line because of an interleaving hex_dump. Remove unnecessary uses of KERN_CONT and use single pr_info()s to avoid any possible output interleaving from other modules. Coalesce formats as appropriate. Remove an extra space from a broken across lines coalescing of "Link Status " and " Change". -v2 Remove changes to Copyright string CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2011-11-16e1000e: convert to real ndo_set_rx_modeJesse Brandeburg
Commit afc4b13d (net: remove use of ndo_set_multicast_list in drivers) changed e1000e to use the ndo_set_rx_mode entry point, but didn't implement the unicast address programming functionality. Implement it to achieve the ability to add unicast addresses. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-15mdio-gpio: Add reset functionality to mdio-gpio driver(v2).Srinivas Kandagatla
This patch adds phy reset functionality to mdio-gpio driver. Now mdio_gpio_platform_data has new member as function pointer which can be filled at the bsp level for a callback from phy infrastructure. Also the mdio-bitbang driver fills-in the reset function of mii_bus structure. Without this patch the bsp level code has to takecare of the reseting PHY's on the bus, which become bit hacky for every bsp and phy-infrastructure is ignored aswell. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14bnx2x: add endline at end of messageDmitry Kravkov
Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net/can/mscan: Fix buggy listen only mode settingWolfgang Grandegger
This patch fixes an issue introduced recently with commit 452448f9283e1939408b397e87974a418825b0a8. CC: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14Sweep the last of the active .get_drvinfo floors under ethernet/Rick Jones
This round of floor sweeping converts strncpy calls in various .get_drvinfo routines to the preferred strlcpy. It also does a modicum of other cleaning in those routines. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14bnx2x: uses build_skb() in receive pathEric Dumazet
bnx2x uses following formula to compute its rx_buf_sz : dev->mtu + 2*L1_CACHE_BYTES + 14 + 8 + 8 + 2 Then core network adds NET_SKB_PAD and SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) Final allocated size for skb head on x86_64 (L1_CACHE_BYTES = 64, MTU=1500) : 2112 bytes : SLUB/SLAB round this to 4096 bytes. Since skb truesize is then bigger than SK_MEM_QUANTUM, we have lot of false sharing because of mem_reclaim in UDP stack. One possible way to half truesize is to reduce the need by 64 bytes (2112 -> 2048 bytes) Instead of allocating a full cache line at the end of packet for alignment, we can use the fact that skb_shared_info sits at the end of skb->head, and we can use this room, if we convert bnx2x to new build_skb() infrastructure. skb_shared_info will be initialized after hardware finished its transfert, so we can eventually overwrite the final padding. Using build_skb() also reduces cache line misses in the driver, since we use cache hot skb instead of cold ones. Number of in-flight sk_buff structures is lower, they are recycled while still hot. Performance results : (820.000 pps on a rx UDP monothread benchmark, instead of 720.000 pps) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Eilon Greenstein <eilong@broadcom.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Tom Herbert <therbert@google.com> CC: Jamal Hadi Salim <hadi@mojatatu.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Thomas Graf <tgraf@infradead.org> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net: fsl_pq_mdio: fix non tbi phy accessBaruch Siach
Since 952c5ca1 (fsl_pq_mdio: Clean up tbi address configuration) .probe returns -EBUSY when the "tbi-phy" node is missing. Fix this. Cc: Andy Fleming <afleming@freescale.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net/can/mscan: add listen only modeMarc Kleine-Budde
This patch adds listen only mode to the mscan controller. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14Sweep additional floors of strcpy in .get_drvinfo routinesRick Jones
Perform another round of floor sweeping, converting the .get_drvinfo routines of additional drivers from strcpy to strlcpy along with some conversion of sprintf to snprintf. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 01:31:58 +0000