summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2009-08-07mwl8k: call pci_unmap_single() before accessing command structure againLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07mwl8k: add various missing GET_HW_SPEC endian conversionsLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07mwl8k: fix NULL pointer dereference on receive out-of-memoryLennert Buytenhek
When we go into out-of-memory and fail to allocate skbuffs to refill the receive ring with, rxq_process can end up running into a receive ring entry that is marked as host-owned but doesn't have an associated skbuff. If this happens, we must break out of the rx processing loop instead of trying to process the descriptor. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07ipw2x00: Write outside array boundsZhu Yi
> channel_index loops up to IPW_SCAN_CHANNELS, but is used after being > incremented. This might be able to access 1 past the end of the array Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ehea: Fix napi list corruption on ifconfig downHannes Hering
This patch fixes the napi list handling when an ehea interface is shut down to avoid corruption of the napi list. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-04igbvf: Allow VF driver to correctly recognize failure to set macAlexander Duyck
The VF driver was not correctly recognizing that it did not correctly set it's mac address. As a result the VF driver was unable to receive network traffic until being unloaded and reloaded. The issue was root caused to the fact that the CTS bit was not taken into account when checking for the request being NAKed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-033c59x: Fix build failure with gcc 3.2Jean Delvare
Fix the following build failure with gcc 3.2: CC [M] drivers/net/3c59x.o drivers/net/3c59x.c:2726:1: directives may not be used inside a macro argument drivers/net/3c59x.c:2725:59: unterminated argument list invoking macro "pr_err" drivers/net/3c59x.c: In function `dump_tx_ring': drivers/net/3c59x.c:2727: implicit declaration of function `pr_err' drivers/net/3c59x.c:2731: syntax error before ')' token Apparently gcc 3.2 doesn't like #if interleaved with a macro call. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-08-03sky2: Avoid transmits during sky2_down()Mike McCormack
This patch supersedes my previous patch "sky2: Avoid transmitting during sky2_restart". I have reworked the patch to avoid crashes during both sky2_restart() and sky2_set_ringparam(). Without this patch, the sky2 driver can be crashed by doing: # pktgen eth1 & (transmit many packets on eth1) # ethtool -G eth1 tx 510 I am aware you object to storing extra state, but I can't see a way around this. Without remembering that we're restarting, netif_wake_queue() is called in the ISR from sky2_tx_complete(), and netif_tx_lock() is used in sky2_tx_done(). If anybody can see a way around this, please let me know. Signed-off-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-03iwlagn: do not send key clear commands when rfkill enabledReinette Chatre
Do all key clearing except sending sommands to device when rfkill enabled. When rfkill enabled the interface is brought down and will be brought back up correctly after rfkill is enabled again. Same change is not needed for iwl3945 as it ignores return code when sending key clearing command to device. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13742 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03libertas: Read buffer overflowRoel Kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03drivers/net/wireless: introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03drivers/net/wireless/iwlwifi: introduce missing kfreeJulia Lawall
Move orthogonal error handling code up before a kzalloc, so that it doesn't have to free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03zd1211rw: fix unaligned access in zd_mac_rxPatrick Simmons
Fix an unaligned memory access in the zd_mac_rx function of zd1211rw that causes problems on SPARC64. Signed-off-by: Patrick Simmons <linuxrocks123@netscape.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03cfg80211: fix regression on beacon world roaming featureLuis R. Rodriguez
A regression was added through patch a4ed90d6: "cfg80211: respect API on orig_flags on channel for beacon hint" We did indeed respect _orig flags but the intention was not clearly stated in the commit log. This patch fixes firmware issues picked up by iwlwifi when we lift passive scan of beaconing restrictions on channels its EEPROM has been configured to always enable. By doing so though we also disallowed beacon hints on devices registering their wiphy with custom world regulatory domains enabled, this happens to be currently ath5k, ath9k and ar9170. The passive scan and beacon restrictions on those devices would never be lifted even if we did find a beacon and the hardware did support such enhancements when world roaming. Since Johannes indicates iwlwifi firmware cannot be changed to allow beacon hinting we set up a flag now to specifically allow drivers to disable beacon hints for devices which cannot use them. We enable the flag on iwlwifi to disable beacon hints and by default enable it for all other drivers. It should be noted beacon hints lift passive scan flags and beacon restrictions when we receive a beacon from an AP on any 5 GHz non-DFS channels, and channels 12-14 on the 2.4 GHz band. We don't bother with channels 1-11 as those channels are allowed world wide. This should fix world roaming for ath5k, ath9k and ar9170, thereby improving scan time when we receive the first beacon from any AP, and also enabling beaconing operation (AP/IBSS/Mesh) on cards which would otherwise not be allowed to do so. Drivers not using custom regulatory stuff (wiphy_apply_custom_regulatory()) were not affected by this as the orig_flags for the channels would have been cleared upon wiphy registration. I tested this with a world roaming ath5k card. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03ixgbe: Patch to modify 82598 PCIe completion timeout valuesMallikarjuna R Chilakala
The default completion timeout values for 82598 should be in the range of 50us to 50ms, however the hardware default for these parts is 500us to 1ms which is less than the 10ms recommended by the pcie spec. To address this we need to increase the value to either 10ms to 250ms for capability version 1 configuration, or 16ms to 55ms for version 2. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02mlx4_en: Fix double pci unmapping.Yevgeny Petrilin
In cases of fragmented skb, with the data pointers being wrapped around the TX buffer, the completion handling code would not forward the data pointer and the firs fragment was unmapped several times, while others were not unmapped at all. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02mISDN: Fix handling of receive buffer size in L1oIPAndreas Eversberg
The size of receive buffer pointer was used to get size of receive buffer instead of recvbuf_size itself, so only 4/8 bytes could be transfered. This is a regression to 2.6.30 introduced by commit 8c90e11e3543d7de612194a042a148caeaab5f1d mISDN: Use kernel_{send,recv}msg instead of open coding Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02pcnet32: VLB support fixesDon Fry
VLB support has been broken since at least 2004-2005 period as some changes introduced back then assumed that ->pci_dev is always valid, lets try to fix it: - remove duplicated SET_NETDEV_DEV() call - call SET_NETDEV_DEV() only for PCI devices - check for ->pci_dev validity in pcnet32_open() [ Alternatively we may consider removing VLB support but there would not be much gain in it since an extra driver code needed for VLB support is minimal and quite simple. ] This takes care of the following entry from Dan's list: drivers/net/pcnet32.c +1889 pcnet32_probe1(298) warning: variable derefenced before check 'pdev' Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Don Fry <pcnet32@verizon.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02pcnet32: remove superfluous NULL pointer check in pcnet32_probe1()Don Fry
Move the debug printk() into the proper place and remove superfluous NULL pointer check in pcnet32_probe1(). This takes care of the following entry from Dan's list: drivers/net/pcnet32.c +1889 pcnet32_probe1(298) warning: variable derefenced before check 'pdev' Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Don Fry <pcnet32@verizon.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02netxen: fix coherent dma mask settingDhananjay Phadke
Change default dma mask for NX3031 to 39 bit with ability to update it to 64-bit (if firmware indicates support). Old code was restricting it under 4GB (32-bit), sometimes causing failure to allocate descriptor rings on heavily populated system. NX2031 based NICs will still get 32-bit coherent mask. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02mISDN: Read buffer overflowroel kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02s6gmac: Read buffer overflowroel kluin
Check whether index is within bounds before testing the element. In the last iteration i is PHY_MAX_ADDR. the condition `!(p = pd->mii.bus->phy_map[PHY_MAX_ADDR])' is undefined and may evaluate to false, which leads to a dereference of this invalid phy_map in the phy_connect() below. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02tulip: Read buffer overflowroel kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02pppol2tp: calls unregister_pernet_gen_device() at unload timeEric Dumazet
Failure to call unregister_pernet_gen_device() can exhaust memory if module is loaded/unloaded many times. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02ppp: fix lost fragments in ppp_mp_explode() (resubmit)Ben McKeegan
This patch fixes the corner cases where the sum of MTU of the free channels (adjusted for fragmentation overheads) is less than the MTU of PPP link. There are at least 3 situations where this case might arise: - some of the channels are busy - the multilink session is running in a degraded state (i.e. with less than its full complement of active channels) - by design, where multilink protocol is being used to artificially increase the effective link MTU of a single link. Without this patch, at most 1 fragment is ever sent per free channel for a given PPP frame and any remaining part of the PPP frame that does not fit into those fragments is silently discarded. This patch restores the original behaviour which was broken by commit 9c705260feea6ae329bc6b6d5f6d2ef0227eda0a 'ppp:ppp_mp_explode() redesign'. Once all 'free' channels have been given a fragment, an additional fragment is queued to each available channel in turn, as many times as necessary, until the entire PPP frame has been consumed. Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30ixgbe: Fix RSC completion delay causing Rx interrupts to stopPeter P Waskiewicz Jr
When a user disables interrupt throttling with ethtool on 82599 devices, the interrupt timer may not be re-enabled if hardware RSC is running. The RSC completions in hardware don't complete before the next ITR event tries to fire, so the ITR timer never gets re-armed. This patch increases the amount of time between interrupts when throttling is disabled (rx-usecs = 0) when the hardware RSC deature is enabled. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30ixgbe: Fix usage of second flags bitmap when using LRO/RSCPeter P Waskiewicz Jr
A second set of feature flag bits was added, and the hardware RSC engine flags were moved there. However, the code itself didn't make the move completely to use the new bitmap. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30ixgbe: Fix netpoll to be properly multiqueue awarePeter P Waskiewicz Jr
Our ndo_poll_controller callback is broken for anything but non-multiqueue setups. This fixes that issue. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30gianfar: fix coalescing setup in ethtool support Jiajun Wu
Parameter order for using mk_ic_value(count, time) was reversed, the patch fixes this. Signed-off-by: Jiajun Wu <b06378@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30pppoe: fix /proc/net/pppoeEric Dumazet
If a socket is hashed in last slot of pppoe hash table (PPPOE_HASH_SIZE-1) we report it many times (up to filling seq buffer) (Only the last socket of last slot) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30eexpress: Read buffer overflowroel kluin
start_code is 69 words, but the code always writes a multiple of 16 words, so the last 11 words written are outside the array. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-303c515: Write outside array boundsroel kluin
if dev_alloc_skb() fails on the first iteration, a write to cp->rx_ring[-1] occurs. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30iscsi: Use GFP_ATOMIC in iscsi_offload_mesg().Michael Chan
Changing to GFP_ATOMIC because the only caller in cnic/bnx2i may be calling this function while holding spin_lock. This problem was discovered by Mike Christie. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-07-29libertas: Read buffer overflowRoel Kluin
Several arrays were read before checking whether the index was within bounds. ARRAY_SIZE() should be used to determine the size of arrays. rates->rates has an arraysize of 1, so calling get_common_rates() with a rates_size of MAX_RATES (14) was causing reads out of bounds. tmp_size can increment at most to (ARRAY_SIZE(lbs_bg_rates) - 1) * (*rates_size - 1), so that should be the number of elements of tmp[]. A goto can be eliminated: ret was already set upon its declaration. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29libertas: Read outside array boundsRoel Kluin
reads bss->rates[j] before checking bounds of index, and should use ARRAY_SIZE to determine the size of the array. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27iwlwifi: Read outside array boundsRoel Kluin
tid is bounded (above) by the size of default_tid_to_tx_fifo (17 elements), but the size of priv->stations[].tid[] is MAX_TID_COUNT (9) elements. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27ath9k: Read outside array boundsRoel Kluin
Incorrect limits leads to reads outside array bounds. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27airo: Buffer overflowRoel Kluin
SSID_rid has space for only 3 ssids. txPowerLevels[i] is read before the bounds check for i Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27wireless: ERR_PTR vs nullDan Carpenter
iwm_wdev_alloc() returns an ERR_PTR on failure and not null. It also prints its own dev_err() message so I removed that as well. Compile tested only. Sorry. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27iwlagn: fix minimum number of queues settingreinette chatre
We need to provide a reasonable minimum that will result in a working setup if used. Set minimum to be 10 to provide for 4 standard TX queues + 1 command queue + 2 (unused) HCCA queues + 4 HT queues (one per AC). We allow the user to change the number of queues used via a module parameter and use this minimum value to check if it is valid. Without this patch a user can select a value for the number of queues that will result in a failing setup. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27iwlwifi: fix TX queue raceJohannes Berg
I had a problem on 4965 hardware (well, probably other hardware too, but others don't survive my stress testing right now, unfortunately) where the driver was sending invalid commands to the device, but no such thing could be seen from the driver's point of view. I could reproduce this fairly easily by sending multiple TCP streams with iperf on different TIDs, though sometimes a single iperf stream was sufficient. It even happened with a single core, but I have forced preemption turned on. The culprit was a queue overrun, where we advanced the queue's write pointer over the read pointer. After careful analysis I've come to the conclusion that the cause is a race condition between iwlwifi and mac80211. mac80211, of course, checks whether the queue is stopped, before transmitting a frame. This effectively looks like this: lock(queues) if (stopped(queue)) { unlock(queues) return busy; } unlock(queues) ... <-- this place will be important there is some more code here drv_tx(frame) The driver, on the other hand, can stop and start queues, which does lock(queues) mark_running/stopped(queue) unlock(queues) [if marked running: wake up tasklet to send pending frames] Now, however, once the driver starts the queue, mac80211 can see that and end up at the marked place above, at which point for some reason the driver seems to stop the queue again (I don't understand that) and then we end up transmitting while the queue is actually full. Now, this shouldn't actually matter much, but for some reason I've seen it happen multiple times in a row and the queue actually overflows, at which point the queue bites itself in the tail and things go completely wrong. This patch fixes this by just dropping the packet should this have happened, and making the lock in iwlwifi cover everything so iwlwifi can't race against itself (dropping the lock there might make it more likely, but it did seem to happen without that too). Since we can't hold the lock across drv_tx() above, I see no way to fix this in mac80211, but I also don't understand why I haven't seen this before -- maybe I just never stress tested it this badly. With this patch, the device has survived many minutes of simultanously sending two iperf streams on different TIDs with combined throughput of about 60 Mbps. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.Michael Chan
When a net device goes down or when the bnx2i driver is unloaded, the code was not generating the ISCSI_KEVENT_IF_DOWN message properly and this could cause the userspace driver to crash. This is fixed by sending the message properly in the shutdown path. cnic_uio_stop() is also added to send the message when bnx2i is unregistering. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26ixgbe: fix for 82599 errata marking UDP checksum errorsDon Skidmore
There is an 82599 errata that UDP frames with a zero checksum are incorrectly marked as checksum invalid by the hardware. This was leading to misleading hw_csum_rx_error counts. This patch adds a test around this counter increase for this condition. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26r8169: WakeOnLan fix for the 8168françois romieu
More stuff for http://bugzilla.kernel.org/show_bug.cgi?id=9512 Some 8168 are unable to WoL when receiving is not enabled (plain old 8169 do not seem to care). It is not exactly pretty to leave the receiver enabled but we should now enable DMA late enough for it to be safe. Some late stage boot failure due to pxe and friends may benefit from the delayed enabling of bus-mastering as well. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Jaromír Cápík <tavvva@volny.cz> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2009-07-26netxen: reset ring consumer during cleanupDhananjay Phadke
Reset consumer of status rings to 0 when cleaning up sw resources. Status rings are not deleted during suspend since they have napi objects. This ensures correct rx processing across suspen-resume. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26smc91x.h: add config for Nomadik evaluation kitAlessandro Rubini
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26eepro: Read buffer overflowRoel Kluin
io[i] is read before the bounds check on i, order should be reversed Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26tokenring: Read buffer overflowroel kluin
io[i] is read before the bounds check on i, order should be reversed Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>