summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2014-07-18b43: N-PHY: add tables for radio 0x2057 rev 14Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: N-PHY: fix channel switching with 2 GHz radio 0x2057Rafał Miłecki
Values were written to wrong registers. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18ath9k: drop negativity checks for unsigned values coming from kstrtoul()Andrey Utkin
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80471 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80481 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18ath9k: set up tx power into the MRRLorenzo Bianconi
Set up tx power for each MRR segment in the tx descriptor Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18ath9k: fix pending tx frames accountingFelix Fietkau
Packets originally buffered for the regular hardware tx queues can end up being transmitted through the U-APSD queue (via PS-Poll or U-APSD). When packets are dropped due to retransmit failures, the pending frames counter is not always updated properly. Fix this by keeping track of the queue that a frame was accounted for in the ath_frame_info struct, and using that on completion to decide whether the counter should be updated. This fixes some spurious transmit queue hangs. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18bcma: add support for BCM43217 found in Tenda W322E (14e4:43a9)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18bcma: extract antenna gains from SPROM correctlyRafał Miłecki
Just like in case of SSB SPROMs they are encoded in a bit tricky way. SPROM struct already uses s8 type and it's supposed to store decoded values. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18ssb: extract power info from SPROM revs 4 and 5Rafał Miłecki
This is needed to properly handle early 802.11n devices like BCM4321. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: add new register region for AGC tableVladimir Kondratiev
New register area defined in the firmware Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: map RGF_USER_USAGE_1 on the debugfsVladimir Kondratiev
Firmware sets this register with the offset of the firmware trace area within the peripheral memory region. Critical for the firmware trace to work Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: use same mapping table for FW addr translation and debugfsVladimir Kondratiev
Use single data source for all information regarding the firmware memory map. With this change "ucode_xxx" regions disappears since they are in fact part of larger "upper area" region Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: fix memory leak on error path in wil_write_file_rxon()Vladimir Kondratiev
If copy_from_user() fails, buffer allocated for parameters would leak Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: fix double definition of 'ctx'Vladimir Kondratiev
Variable 'ctx' declarad again in the inner loop. Should use one from outer loop instead. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: export FW/HW versions through debugfsVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: support for "sparrow" hardwareVladimir Kondratiev
New hardware release appears; it require some changes to properly support it. Introduce struct wil_board and "board" attribute in wil6210_priv; keep hardware variant information in this structure. fill it on probe(). Used in the reset flow. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18Merge tag 'for-linville-20140717' of git://github.com/kvalo/athJohn W. Linville
2014-07-18Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2014-07-16mwifiex: remove redundant TDLS setup action frame check and avoid leaksBing Zhao
The unwanted frame types are already handled in 'default' case of the switch/case below. The str_ptr is allocated but it can be leaked if the length check fails in the REQUEST/RESP cases. Fix it by allocating sta_ptr after the length checks. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15ssb: extract antenna gains from SPROMs revs 4+ properlyRafał Miłecki
They are encoded the same way as in older SPROMs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15ssb: make code for antenna gain extraction more genericRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wireless: zd1211rw: new url for fw, remove experimentalXose Vazquez Perez
Cc: Daniel Drake <dsd@laptop.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add missing TX gain table for radio 0x2057 rev 5Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: add brcmf_p2p_detach() call in brcmf_cfg80211_detach()Arend van Spriel
The function brcmf_p2p_detach() was only called in error flow of the brcmf_cfg80211_attach() routine, but it also needs to be called upon brcmf_cfg80211_detach(). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: rework wiphy structure setupArend van Spriel
Instead of waiting for IFF_UP of the primary net device to determine the band and channel information of the wiphy structure, this is now done during driver initialization in brcmf_cfg80211_attach(). The channel information is obtained from the device and the 2G band is updated when 40MHz bandwidth is enabled for that band. Before this change the band and channel objects were common between multiple brcmfmac devices in the system, which make that information rather unreliable. That is also fixed with this reworked implementation. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: moving some functions aroundArend van Spriel
Just reordering the functions in preparation of subsequent changes. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: introduce feature and quirk handlingArend van Spriel
Introducing a new source module that will be responsible for identifying features and quirks related to the device being handled. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: move attach and detach functions in wl_cfg80211.cArend van Spriel
Preparing for another patch move the functions in separate commit. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: Make firmware path a module parameterDaniel Kim
This patch makes firmware path a module parameter so that firmware and nvram files can be loaded from the specified path. Signed-off-by: Daniel Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: rework debugfs functions in the driverArend van Spriel
Reworked the debugfs functions in the driver making it easier for other driver parts to add a debugfs entry and keeping the information they want to expose in debugfs private, ie. not in a header. This is accomplished by providing the function brcmf_debugfs_add_entry() in which the caller provides a read function in which they provide the content. The debugfs function will take care of creating the debugfs entry and cleaning up upon removal. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: make use of seq_file API for debugfs entriesArend van Spriel
The use of seq_file simplifies the debugfs code. Simpler is better. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: Cleanup used device IDs.Hante Meuleman
This patch cleans up used broadcom IDs, device IDs for all the bus layers and uses consistent naming for all IDs. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: correct a typo in mwifiex_ret_tdls_operBing Zhao
This patch fixes this typo. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: declare sta_ptr in smaller scopeBing Zhao
sta_ptr is used only in an 'if' branch in this function. Move it to the smaller scope where it is used. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: define TDLS idle timeout macro with unitsBing Zhao
The unit of this timeout is in seconds. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: fix a cut-n-paste error in adhoc-startBing Zhao
The 'else if' branch never gets the chance as its condition matches 'if' branch's. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: fix corner case system hang issueAmitkumar Karwar
Sometimes pending internal scan commands are delayed to give preference to Tx traffic. 'scan_processing' flag has been checked at the beginning of delay timer routine to know if in the meantime scan operation has been cancelled. There is a corner case where pending scan commands are emptied after scan_processing flag check is passed. In this case wrong pointer returned by list_first_entry() is passed to list_del() which causes system hang. This patch fixes the issue by adding list_empty() check. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: access rx_reorder_tbl_ptr only while holding lockAmitkumar Karwar
This patch fixes a bug in which rx_reorder_tbl_ptr is accessed without holding spinlock at few places. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wireless: rt2x00: add new rt2800usb devicesXose Vazquez Perez
0x0b05 0x17e8 RT5372 USB 2.0 bgn 2x2 ASUS USB-N14 0x0411 0x0253 RT5572 USB 2.0 abgn 2x2 BUFFALO WLP-U2-300D 0x0df6 0x0078 RT???? Sitecom N300 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore/wl18xx/wl12xx: convert bitmaps to unsigned longsEliad Peller
The *_bit operations expect unsigned longs. Instead of casting the pointers, simply define various bitmaps as unsigned long (instead of u32). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wl18xx: make sure fw_status->priv exists before derefEliad Peller
In some corner cases with specific timings, we might try dequeueing tx before we got information about the link status (e.g. due to recovery during tx). Instead of NULL dereference, assume all the links in this case have low priorities. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wl18xx: change the number of WLAN addrs per chipArik Nemtsov
Each 18xx chip contains only 2 real MAC addresses usable for WLAN, forcing us to use the LAA bit approach to obtain a third MAC address. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: don't switch channels on disconnected STA vifsArik Nemtsov
Sending the FW a channel switch command on a disconnected vif may result in a beacon loss event. Avoid this corner case. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: register vendor commandsEliad Peller
All the smart config code is in place now, so register the relevant vendor commands. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: increase max roc duration to 30 secondsEliad Peller
we don't have any actual limitation in the driver, so increase it arbitrarily to 30 seconds. The long ROC is needed for the smart config.flow. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore/wl18xx: handle smart config eventsEliad Peller
add defintions and handling for smart config events (SMART_CONFIG_SYNC_EVENT_ID and SMART_CONFIG_DECODE_EVENT_ID) parse the relevant info and send it to userspace as vendor event. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: handle smart config vendor commandsEliad Peller
userspace can ask to perform various smart config actions via custom vendor commands. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore/wl18xx: add smart config commandsEliad Peller
These commands configures the fw to set key, enter smart config mode, and exit it. Add relevant hw ops as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: add smart config definitionsEliad Peller
Add definitions for the smart config commands. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: use correct LAA bitEliad Peller
The LAA bit is second bit of the MSB, not of the third byte. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wl18xx: fix last tx rate calculationEliad Peller
The last tx rate calculation didn't take into account the different indices of 11a and 11g rates tables. Add the required alignment (count only from the first 11a rate in case of 11a) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-08 19:45:09 +0000