summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2009-12-05V4L/DVB (13211): cx23885: card Mygica X8506 analog TV supportDavid T.L. Wong
Signed-off-by: David T.L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13210): cx23885: card Mygica X8506 better GPIO setupDavid T.L. Wong
Signed-off-by: David T.L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13209): cx23885: card mygica x8506 add analog video input supportDavid T.L. Wong
Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13208): cx23885: fix uninitialized member bugDavid T.L. Wong
Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13207): cx23885: add component input typeDavid T.L. Wong
Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13206): cx25840: add component supportDavid T.L. Wong
Signed-off-by: David T.L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13204): saa7134: add support for the Leadtek DTV1000SMichael Krufky
Thanks to Terry Wu for finding the GPIOs required for svideo / composite input Cc: Terry Wu <terrywu2009@gmail.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13201): saa7164: disable tda18271 slave tuner output on slave in ↵Michael Krufky
standby mode Enable the standby mode optimization to disable the tda18271 slave tuner output / loop thru options when in low power mode on the slave tuner, only. The master tuner must always leave slave tuner output / loop thru enabled. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13198): gspca - ov519: Bad frame pointer in ovfx2 packet scan.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13197): gspca - sonixj: Adjust colors and autogain for sensor om6802.Amauri Magagna
- set correct colors at startup time - autogain was too slow (4-5 mn - now 15-30 s)) Signed-off-by: Amauri Magagna <amaurimagagna@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13196): gspca - gl860: add flip/mirror for OV2640Olivier Lorin
- add flip/mirror support for OV2640 - fix for backlight value range - fix for red-blue inversion hue mode with V4L1 applications Signed-off-by: Olivier Lorin <o.lorin@laposte.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13195): gspca - gl860: comment changes and naming scheme egalizationOlivier Lorin
- small changes in comments - unified naming scheme for subdriver variables Signed-off-by: Olivier Lorin <o.lorin@laposte.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13194): gspca - gl860: improvement of the main driver partOlivier Lorin
- fix for warning compilation about sd_ctrls - trace improvement while probing the sensor Signed-off-by: Olivier Lorin <o.lorin@laposte.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13193): gspca - zc3xx.c: Change init sequences of sensor tas5130c.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13192): gspca - pac_common: redesign function for finding Start Of ↵Marton Nemeth
Frame The original implementation of pac_find_sof() does not always find the Start Of Frame (SOF) marker. Replace it with a state machine based design. Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13188): xc5000: return an error on tuning attempts if firmware not ↵Devin Heitmueller
loaded Xc5000 tuning attempts shouldn't return zero in the case where the firmware did not load successfully. Thanks to Michael Krufky for pointing out this issue. Cc: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13187): au8522: add support for saturation and hue controlsDevin Heitmueller
Add support for saturation/hue controls, prompted by errors showing up in the mythbackend log. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13185): gspca: Don't resubmit error status URB's when suspendingHans de Goede
gspca: Don't resubmit error status URB's when suspending Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13184): gspca: Don't forget to resubmit URB's in case of an errorHans de Goede
The gscpa core was not resubmitting URB's when the URB status was an error, this means we will loose URB's (potentially all stopping the stream) in case of sporadic USB issues. I've seen this with an Aiptek stv0680 based PenCam connected through an USB 2.0 hub. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13183): gspca: add stv0680 subdriverHans de Goede
This patch adds a new subdriver to gspca supporting cams with the stv0680 bridge (replacing the old in kernel v4l1 driver). Many thanks to Hans Verkuil for providing me with one of the 2 cams used in testing this new sub driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13182): gspca w9968cf: slight tweak to vstart and hstartHans de Goede
gspca w9968cf: slight tweak to vstart and hstart to get rid of black borders in 640x480 mode. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13181): gspca w9968cf: Add support for JPEG compressionHans de Goede
gspca w9968cf: Add support for JPEG compression, this enables much higher framerates at 320x240 / 352x288 and also allows for 640x480 mode for cams which can do this. The w9968cf uses planar JPEG, which libv4l until now did not support, so this requires atleast version 0.6.3 of libv4l. And something important I forgot to mention in my earlier w9968cf commits: Many thanks to Hans Verkuil for giving me a w9968cf based cam, which has allowed me to develop the gspca w9968cf support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13180): gspca-w9968cf: Don't add an extra packet to the buffer ↵Hans de Goede
after the EOF gspca-w9968cf: Don't add an extra packet to the buffer after the EOF, this makes the frame data size bigger then it should be which makes gstreamer discard it. This patch also fixes an unrelated compiler warning. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13179): gspca_ov519: cache sensor regs to avoid unnecessary slow ↵Hans de Goede
i2c reads / writes Cache sensor regs to avoid unnecessary slow i2c reads / writes, this speeds up sd_start a bit with most bridges and a lot (from 5 seconds down to 0.3 seconds) with W996xCF cams, as this avoids very slow bit bang IO over USB i2c reads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13178): gspca: Add support for Winbond W9967CF and W9968CF camera'sHans de Goede
This patch adds support to gspca for the Winbond W9967CF and W9968CF camera's. This is mostly a port of the existing v4l1 driver to gspca (making it v4l2). But this also features fixes to the bitbanging i2c code (send a nack not an ack after reading the last byte of a transfer), which gets rid of the weird errors which were being seen there, and of the smbus_refresh() hack to get around these errors. Also the vstart settings have been tweaked to work with different frequency filter settings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13177): radio: Add support for TEF6862 tunerRichard Röjfors
This patch adds support for TEF6862 Car Radio Enhanced Selectivity Tuner. It's implemented as a subdev, supporting checking signal strength and setting and getting frequency. Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13176): adv7180: Support checking standard via interruptsRichard Röjfors
If the I2C device provides an interrupt it is registered and the standard is updated via interrupts rather than polling. Since I2C communication is needed, the interrupt handler fires off a work which will check the new standard, and store it in the internal structure. To handle mutual exclusion a mutex is introduced. Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13175): adv7180: Use __devinit and __devexit macrosRichard Röjfors
This patch defines the probe and remove function as __devinit and __devexit. Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13174): adv7180: Support for setting input statusRichard Röjfors
Support for settings the input standard of the ADV7180. When the input standard is set there is no use to ask the chip for standard, therefore it is cached in the driver. Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13173): adv7180: Support for getting input statusRichard Röjfors
This patch adds support to the ADV7180 driver to check the input status. Since the status is held in the same register as the input standard a small restructuring of the code is done to reuse the code for reading the register Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13168): Add support for Asus Europa Hybrid DVB-T card (SAA7134 ↵Danny Wood
SubVendor ID: 0x1043 Device ID: 0x4847) Adds the device IDs and driver linking to allow the Asus Europa DVB-T card to operate with these drivers. The device has a SAA7134 chipset with a TD1316 Hybrid Tuner. All inputs work on the card including switching between DVB-T and Analogue TV, there is also no IR with this card. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: Danny Wood <danwood76@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13166): remove duplicate structure field initializationJulia Lawall
The definition of tvaudio_tuner_ops initializes the s_tuner field twice. It appears that the second case should initialize the g_tuner field. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I, s, fld; position p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @s@ identifier I, s, r.fld; position r.p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @script:python@ p0 << r.p0; fld << r.fld; ps << s.p; pr << r.p; @@ if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column): cocci.print_main(fld,p0) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13165): videobuf do not force buffer size to be multiple of PAGE_SIZETuukka Toivonen
When the image size (bytesperline*height) is not multiple of PAGE_SIZE, v4l2 rounded the required buffer size to be multiple of PAGE_SIZE. This prevented user space to store images directly into userptr buffers which were not multiple of PAGE_SIZE. This constraint is removed. The start address is still assumed to be required page-aligned, ie., when v4l2 allocates mmap buffers, the offset between different buffers is page-aligned. Signed-off-by: Tuukka Toivonen <tuukka.o.toivonen@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13157): dvb_frontend: represent all DVBS2API commands via macroMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13155): uvcvideo: Add a module parameter to set the streaming ↵Laurent Pinchart
control timeout The default streaming control timeout was found by Ondrej Zary to be too low for some Logitech webcams. With kernel 2.6.22 and newer they would timeout during initialization unles the audio function was initialized before the video function. Add a module parameter to set the streaming control timeout and increase the default value from 1000ms to 3000ms to fix the above problem. Thanks to Ondrej Zary for investigating the issue and providing an initial patch. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13154): uvcvideo: Handle garbage at the end of streaming interface ↵Laurent Pinchart
descriptors At least one 5986:0241 webcam model includes vendor-specific descriptors at the end of its streaming interface descriptors. Print an information UVC_TRACE_DESCR message and try to continue parsing the descriptors rather than bailing out with an error. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13153): uvcvideo: Fix uvc_alloc_urb_buffers()Ming Lei
This patch sets stream->urb_size as psize*npackets before calling uvc_alloc_urb_buffers, which may fix a possible failure of usb_buffer_free in case usb_buffer_alloc returns NULL. The patch is based on the ideas below: 1,If usb_buffer_alloc can't allocate a buffer sucessfully, uvc_free_urb_buffers will be called to free the allocated buffers, and stream->urb_size is required to be passed to usb_buffer_free; 2,uvc_free_urb_buffers can reset stream->urb_size. This patch is against linux-v2.6.31-next-20090926. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13152): uvcvideo: Rely on videodev to reference-count the deviceLaurent Pinchart
The uvcvideo driver has a driver-wide lock and a reference count to protect against a disconnect/open race. Now that videodev handles the race itself, reference-counting in the driver can be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13151): uvcvideo: Dismiss privileges when freeing video buffersLaurent Pinchart
Dismiss privileges on the file handle when calling VIDIOC_REQBUFS with a buffer count of 0. This allows applications to release the streaming permissions on the file handle without closing it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13150): uvcvideo: Don't acquire privileges in VIDIOC_TRY_FMTLaurent Pinchart
The VIDIOC_TRY_FMT ioctl doesn't interfere with video streaming and thus should succeed on an unprivileged file handle. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13149): uvcvideo: Add a new UVC_TRACE_VIDEO trace levelLaurent Pinchart
Use the trace level for messages related to video URB buffers allocation and alternate setting selection. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13148): uvcvideo: Handle V4L2_CTRL_TYPE_BUTTON control type in ↵Laurent Pinchart
VIDIOC_QUERYCTRL Return minimum, maximum and step set to 0 without querying the hardware. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13146): gspca_ov519: cleanup sensor handlingHans de Goede
There were various "if (sensor == foo)" pieces of code inside ov519.c, move these bits to the sensor specific init functions, where they belong. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13145): gscpa_ov519: add support for the ovfx2 bridgeHans de Goede
gscpa_ov519: add support for the ovfx2 bridge Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13144): gspca_ov519: Add support for OV2610 and OV3610 sensorsHans de Goede
This patch adds support for the OV2610 and OV3610 sensors to the gspca ov519 subdriver. This is a preparation patch for adding ovfx2 bridge support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13143): gspca_ov519 cleanup sensor detectionHans de Goede
gspca_ov519 cleanup sensor detection Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13142): gspca_mr97310a: small tweak to CIF sensor type 1 exposure ↵Hans de Goede
setting The CIF sensor type 1 exposure setting got clamped at 300, as settings below 300 do not work well (and do work for the other sensors). This patch scales the 0-4095 range to 300-4095 instead of ignoring changes between 300, avoiding have a part of the control range where nothing happens. This is esp. important for software autogain as done by libv4l. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13141): gspca_sq905c: once one frame is discarded it keeps ↵Hans de Goede
discarding all frames While checking all gspca sub drivers pkt_scan functions for a bug I found in 1 of them (and after checking also in another), I noticed a bug in the gspca_sq905c work queue function, once it has decided to start discarding a frame because the application is not reading fast enough (and thus returning buffers to fill fast enough), it never stops discarding. This patch fixes this by simply completely removing the "discarding" variable, if we need to discard the current frame because there is no buffer to store it, the "frame" pointer will be NULL, so that is all we need to check. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13140): gspca_jeilinj: once one frame is discarded it keeps ↵Hans de Goede
discarding all frames While checking all gspca sub drivers pkt_scan functions for a bug I found in 1 of them (and after checking also in another), I noticed a bug in the gspca_jeilinj work queue function, once it has decided to start discard a frame because the application is not reading fast enough (and thus returning buffers to fill fast enough), it never stops discarding. This patch fixes this by simply completely removing the "discarding" variable, if we need to discard the current frame because there is no buffer to store it, the "frame" pointer will be NULL, so that is all we need to check. I've also moved the gspca_get_i_frame() call and the writing of the jpg header to the buffer to after the first usb_bulk_msg() call, as we don't need it before that, and that will give the app slightly more time to queue a buffer for us to fill. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13139): gspca_mr97310a: Improve VGA sensor type detectionTheodore Kilgore
Improve (and also simplify :) gspca_mr97310a: VGA sensor type detection. As it was still failing on some machines (not with some cams, but on some machines interesting enough). Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-21 00:09:10 +0000